Контроллеры, индикаторы

• Stable long-life electrochemical gas sensor
• Range 0...10 / 0...200 / 0...1500 ppm C₂H₄
• Resolution 0,1 / 1 / 5 ppm C₂H₄
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor

• Electrochemical gas sensor
• Range: 0...10 / 0...200 / 0...1500 ppm C₂H₄
• Resolution: 0,1 / 1 / 1 ppm C₂H₄
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -20...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Electrochemical gas sensor
• Range: 0...20 / 0...100 ppm C₂H₄O
• Resolution: 0,1 / 1 / 5 ppm C₂H₄O
• Analog output: 2 x 4...20 mA / 0a...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -20...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Suitable for ATEX Zones 2 and 22
• Electrochemical gas sensor
• Range: 0...100, 0...300, 0...1000, 0...5000 ppm NH3
• Resolution: 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -40...+50 °C
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Stable long-life pellistor (catalytic bead) sensor
• Range: 0...15% vol. (0…100% LEL)
• Resolution: 0.1% vol. or 1% LEL
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -10...+50 °C
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Stable long-life photoacoustic or optical NDIR sensor
• Range: 0...10 000 ppm / 0...40 000 ppm / 0...5 % vol (0...100 % on request)
• Resolution: 1 ppm / 10 ppm / 0.01 % vol. CO2
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -40...+60 °C; 0….100 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Stable long-life electrochemical sensor
• Range: 0...300 or 0...1000 ppm
• Resolution: 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -20...+50 °C; 0….90 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Detected gases: hydrogen, methane, acetylene, propane, butane
• Default calibration: methane CH4
• Stable long-life metal-oxide / pellistor sensor
• Range: 0...100% LEL
• Resolution: 0,1 / 1 % LEL
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -40...+70 °C; ≤ 95 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Stable long-life electrochemical sensor
• Range: 0...10 / 0...200 / 0...1500 ppm
• Resolution: 0,1 / 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -40...+50 °C; up to 100 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Detectable gases: R-12, R-123, R-125, R-134a, R-143, R-22, R-404a, R-407c, R-410a, R-507, R-514a, R-1234ze and similar
• Stable long-life metal-oxide sensor
• Range: 0…1000 / 0…2500 ppm
• Resolution: 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -30...+60 °C; < 95 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Stable long-life electrochemical sensor
• Range: 0...100 ppm, 0...2000 ppm H2S
• Resolution: 1 ppm H2S
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -40...+50 °C; 15…90 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Stable long-life electrochemical sensor
• Range: 0…250 ppm
• Resolution: 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -30...+50 °C; 15…90 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Stable long-life optical NDIR sensor
• Range: 0…1000 ppm
• Resolution: 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -20...+50 °C; 0…95 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Stable long-life electrochemical sensor
• Range: 0...25 % vol O2
• Resolution: 0,01 % vol O2
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -40...+60 °C; 5…95 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Highly sensitive Photo Ionization Detector (PID) sensor
• Detectable gases: VOCs (acetone, ethanol, toluene, xylene etc.)
• Default calibration: Isobutylene
• Range: 0…40 / 0…200 ppm isobutylene
• Resolution: 0,01 / 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -40...+65 °C; 0…95 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Stable long-life metal-oxide sensor
• Detectable gases: acetone, ethanol, toluene, xylene etc.
• Default calibration: toluene
• Range: 0...1000 ppm (toxic range) / 0...100% LEL (flammable range)
• Resolution: 1 ppm for toxic ranges / 0,1 % LEL for flammable range
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -40...+70 °C; < 95 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

Thermal mass flow sensor for compressed air and gases VA 500

• 4...20 mA, pulse and a Modbus RTU (RS 485) interface as standard
• Optional: Interfaces such as Modbus TCP (Ethernet), PoE, M-Bus
• Optional: Bi-directional measurement
• Pressure tight up to 50 bar
• Temperature range up to 110 °C
• Protection class IP65
• Suitable for gas velocities up to 224 Nm/s
• Integrated display for showing the measured values
• Can be used from 1/2" up to 40", larger diameters on request
• Easy installation under pressure
• Settings can be changed via the display
• Main counter reading can be reset via the display

• Calorimetric measuring principle
• Units freely selectable via keys at the display
• Display shows 2 values at the same time, twistable by 180 ° degree
• Integrated Modbus interface enables connection control systems, SCADA
• M-Bus (optional)
• Analog output 4...20 mA
• Pulse output (galvanic isolation)
• High measuring accuracy (ideal for leakage measurement)

• Gas measuring, monitoring and warning controller (Multi-Sensor-Controller MSC) for reliable detection of combustible, toxic and refrigerant gases
• Flexible control: 3 relays (SPDT, potential-free, 250 V)
• Intelligent Communication: RS-485 interface with DGC and Modbus protocol
• Precise signal transmission: 4–20 mA input and output for seamless system integration, up to 3 sensors including remote

• GA-1 is designed for grease detection in separators, basins and tanks
• Easy to install, does not need calibration
• Switch output
• Remote monitoring capability
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

• GA-2 is designed for grease detection in separators, basins and tanks
• Two sensors – one is for grease detection, other – for blockage control
• Easy to install, does not need calibration
• 2 switch outputs
• Remote monitoring capability
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

• Digital inputs: 2
• 1-Wire input (up to 8 sensors)
• RS-485 input (up to 8 sensors)
• Analog inputs: 4 (2 x 0...10 VDC, 2 x 0...10 VDC / 4...20 mA, WEB control)
• Relay outputs: 4 (NO/NC)
• Setup via USB or SMS
• Data logger for up to 52 000 records
• Webserver
• Periodical upload of data logger file to a remote HTTP server
• HTTP Post, HTTP API
• SMS alarms (up to 5 numbers)
• E-mail alarms (up to 5 recipients), SMT with TLS support
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...24 VDC

• Digital inputs: 2
• 1-Wire input (up to 4 sensors)
• Analog inputs: 2 (0...60 VDC)
• Relay outputs: 2 (NO/NC)
• Setup via USB or SMS
• Webserver
• HTTP Post, HTTP API
• SMS alarms (up to 5 numbers)
• E-mail alarms (up to 5 recipients), SMTP with TLS support
• Operating temperature: 0...40 °C
• Warranty: 3 years
• Supply: 10...28 VDC

• Used with grain temperature sensor cables GWSL 1100, GWSL 2100 and spear sensors GWTL-R
• Cable length up to 200 m (including the temperature cables)
• Up to 32 values of temperatures are shown in cycle
• Weight: 240 g (with batteries)
• Case material: ABS
• Supply: 2 x AA (battery life circa 1 year)
• Operating temperature: -20...+40 °C

• Communicates with devices supporting HART and LHP interfaces
• Supports universal, common commands
• HART connector: BNC
• Supply: 9 V accumulator (charged via USB)
• Operating temperature: -20...+50 °C
• Operating humidity: 0...80 % RH
• Protection class: IP40

• High level detection
• Oil on water surface detection
• Designed for usage in separators, basins and tanks
• Easy to install, does not need calibration
• Reliable long-term se in harshest conditions
• Acoustic and visual alarms
• 2 switch outputs
• ATEX certified
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

Recorder HT20 is designed for measurement and logging of ambient humidity and temperature.

• Especially suitable for server rooms, pharmaceutical and food warehouses, laboratories, museums and greenhouses
• Logged data is stored in the internal memory and then sent digitally to the user (over Ethernet)
• Alarms are formed by e-mails, on the webserver, using symbols on screen or via audible alarms
• HT20 can be powered by the Ethernet network (PoE – Power over Ethernet), additionally ordered
• FTP, DHCP, SMT, Modbus TCP/IP protocols

• Long-life metal-oxide gas sensor
• Range 0...100 % LEL H₂
• Resolution 0,1 % LEL H₂
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor options

• Stable long-life electrochemical gas sensor
• Range 0...100 / 0...1000 ppm H₂S
• Resolution 0,1 / 1 ppm H₂S
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 10 / 20 ppm H₂S

• Stable long-life electrochemical gas sensor
• Range 0...100 / 0...1000 ppm H₂S
• Resolution 0,1 / 1 ppm H₂S
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor option

• Electrochemical gas sensor
• Range: 0...100 / 0...2000 ppm H₂S
• Resolution: 0,1 / 1 ppm H₂S
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

“idOil®” is an alarm system intended for monitoring liquid levels particularly in oil and sand separators. The system consists of the idOil control unit and the idOil sensors installed in the separator. The sensor cables can be extended with a cable connector or connection box. One to three digital idOil sensors of the same or different type can be connected to the control unit. The sensors can be used to monitor the following:

• High liquid level (idOil-LIQ high liquid level sensor)
• Oil layer detection (idOil-OIL oil sensor is for class IIA explosive liquids and idOil-OIL-Soil sensor is for class IIB explosive liquids)
• Sludge layer detection (idOil-SLU sludge sensor)

“idOil®” is an alarm system intended for monitoring liquid levels particularly in oil and sand separators. The system consists of the idOil control unit and the idOil sensors installed in the separator. The sensor cables can be extended with a cable connector or connection box. One to three digital idOil sensors of the same or different type can be connected to the control unit. The sensors can be used to monitor the following:

• High liquid level (idOil-LIQ high liquid level sensor)
• Oil layer detection (idOil-OIL oil sensor is for class IIA explosive liquids and idOil-OIL-Soil sensor is for class IIB explosive liquids)
• Sludge layer detection (idOil-SLU sludge sensor)

• Universal input for measuring temperature, resistance and standard signal
• 4 alarm outputs with signaling on LED diodes
• Digital output: RS-485 modbus (can be programmed through RS-485)
• Analog signal output: 0/4...20 mA or 0...10 V
• Two-line LCD display
• Mathematical functions for converting the measured value
• Protection grade: frontal side – IP65 / from terminal side – IP10
• Operating temperature: -25...23...55 °C

• Input: 0...20 mA, 4...20 mA, 0...1 V, 0...10 V
• Display: 4 digits (value range: -1999...4000)
• Measurement unit can be displayed
• Option: 2 x relay output for control and alarm
• Option: sensor supply output
• Option: RS-485 Modbus RTU interface
• Manual calibration
• Stores maximum and minimum measurement values
• Operating temperature: 0...50 °C
• Supply: 230/110 VAC / 12/24 VAC / 9...30 VDC / 7...24 VAC

• Voltage measurement ± 600 V, current measurement via shunt, power, energy and capacity measurement of d.c. circuits
• 4 alarm outputs with signaling on led diodes, working in 7 different modes
• Analog outputs: 0/4...20 mA or 0...10 V
• Digital output: RS-485 / MODBUS RTU
• Two-line LCD display
• Protection grade: frontal side – IP65 / from terminal side – IP10
• Operating temperature: -25...23...55 °C

N19Z meter measures AC voltage and current. The meter is designed to work in 3-phase networks or 1-phase networks.

• Nominal input voltage: 300 or 600 V 1 phase / 100…500 V 3 phase
• Nominal input current: 1A or 5A
• True RMS measurement (up to 15th Harmonic)
• On site programmable PT/CT ratios
• User selectable 3ph3wire or 3ph4wire Network (for 3ph)
• Onsite selection of Auto scroll / Fixed Screen (for 3ph)
• 4 Digits 14mm ultra bright LED Display
• Protection: IP54 front / IP20 back
• Parameter Screen recall: In case of power failure, the instrument memorizes the last displayed screen
• Accuracy: ±0.5% of nominal value

Industrial IoT module TCW242 for remote real-time monitoring and control of industrial equipment, facilities, production lines, renewable energy systems, greenhouses and water stations

• Web-based configuration and control with password protection
• 4 digital inputs for dry contacts
• 4 analog inputs with 0-10V and 0-20mA options
• 4 relays with normally open/normally closed contacts
• RS-485 interface for MODBUS RTU sensors. Up to 24 sensors (registers)
• Monitor up to 24 channels
• Set up to 24 independent alarms
• SNMPv3 protocol support
• Alarm notifications via SNMP traps
• NTP protocol support
• HTTP API commands
• 4 schedules for real-time control of relay outputs
• Custom logical functions
• Secured email transfer with TLS 1.0, TLS 1.1, and TLS 1.2 support
• Data logging capacity for up to 70,000 records
• Dynamic DNS support for DynDNS, No-IP, and DNS-O-Matic providers
• Periodical HTTP / HTTPS Post of XML / JSON status files for client-server systems
• MODBUS TCP / IP protocol support
• MQTT 3.1.1 protocol support
• Rugged DIN-Rail / wall-mountable enclosure
• Operating temperature range: -20…+55 °C

• Ethernet connection
• Digital inputs: 2
• 1-Wire input (up to 2 sensors)
• Analog inputs: 2 (0...60 VDC)
• Relay outputs: 2 (NO/NC)
• IP watchdog function
• Webserver
• SNMP alarms
• VLAN and MAC address filtering
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...14 VDC

• Adjustable start time delay: 0...16 s
• Operating resistance: 0...100 kΩ
• Mounting on DIN rail
• Operating temperature: -10...50 °C
• Supply: 117/230/400 VAC
• Protection class: IP20

• Three versions by sensitivity: NS (standard), AS (high), SR (adjustable)
• Operating resistance: 5,6 kΩ (NS) 70 kΩ (AS) 0...100 kΩ (SR)
• Mounting on DIN rail
• Operating temperature: -10...50 °C
• Supply: 117/230/400 VAC
• Protection class: IP20

• Input: standard 4...20 mA signal or capacitive Labkotec 3W probe
• Current output: 0/4...20 mA
• Switch outputs: 2 units
• LCD display
• Programmable using buttons
• ATEX certified
• Wall-mounted, IP65
• Supply: 230 VAC, 50/60 Hz

• High level detection
• Oil on water surface detection
• Sludge under water detection
• Designed for usage in separators, basins and tanks
• Version with GSM module available – for alarms and service reminders
• Acoustic and visual alarms
• 2 switch outputs
• ATEX certified
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

• Įėjimas: Pt100, Pt1000, 0…4000 Ω, TC (E, J, K, N, R, S), -75…310 mV, -10…10 V, -24…24 mA, potenciometras
• Relinė išėjimas: 1 x NO kontaktas, apkrovos galia 6 A / 250 V AC; 6 A / 30 V DC
• Skaitmeninis išėjimas: RS-485 / MODBUS RTU
• Išorinio įrenginio maitinimas: 24 V DC / 24 mA
• Matematinės funkcijos matavimo reikšmės konvertavimui
• Dviejų eilučių LCD ekranas (1 eilutė – 6 skaitmenys, 2 eilutė – 5 skaitmenys)
• Apsaugos klasė: priekio – IP65 / galo – IP10
• Darbinė temperatūra: -20...23...60 °C
• Maitinimas: 40…253 V AC / 20…300 V DC

• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL (0...5 % vol) CH₄
• Resolution 0,1 % LEL (50 ppm) CH₄
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 20 / 50 % LEL CH₄

• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL CH₄
• Resolution 0,1 % LEL CH₄
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 20 / 50 % LEL CH₄
• Visual and acoustic alarms

• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL (0...5 % vol) CH₄
• Resolution 0,1 % LEL (50 ppm) CH₄
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor options

• Metal-oxide gas sensor
• Range: 0...100% LEL (0...5 %) CH₄
• Resolution: 0,1 % LEL (50 ppm) CH₄
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+70 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Input: Modbus RTU – RS-485
• Output: 4-channel SPST relay contacts
• Rated relay load: 3 A at 250 Vac; 3 A at 30 Vdc
• Non-volatile memory to retain and restore relay states following power outages
• Watchdog functionality for communication loss
• Operating temperature / humidity: -20…+60 °C / 10…90 % (non-condensing)
• DIN rail mounting
• Power supply: 5…28 Vdc
• Warranty: 3 years