Беспроводные датчики

• Universal air and environment quality sensor E2-CO2-series measures CO₂ (carbon dioxide) level, temperature, humidity, pressure, sound level, ambient light (LUX). Transmits instant values, average hourly values, and average 24-hour values
• Communication: wM-BUS EN13757-3/4:2013, complies OMS 4.0.2
  • Modes: C1-A/B, T1 or S1 (selectable on order)
• Measurement ranges
  • Temperature: -40…85 °C
  • Humidity: 0…100 % RH (non-condensing)
  • CO2: 0…5000 ppm (0…55 °C)
  • LUX: 0,01…83000 LUX at same frequency as the human eye
  • Absolute pressure: 20…100 kPa
  • Sound level: 53…90 dBa at 850 Hz
• Measurement accuracy
  • Temperature: ± 0,2 at +5…+60 °C; ± 0,5 at -20…+85 °C
  • Humidity: ± 2 % RH at 20…80 % RH; ± 3 % RH at 10…90 % RH; ± 3,5 % RH at 0…100 % RH
  • CO2: ± (50 ppm + 3%)
  • LUX: 4 %
  • Pressure:  0,4 kPa
• CO2 sensor calibrates every 20 days
• Warnings about low battery, CO₂ sensor malfunction, calibration not performed yet
• Transmission interval: every 90 seconds
• Measured values sample interval: every 6 minutes
• LED and sound indication about CO₂ exceeded limit
• Device has 2 antennas for maximum range in both vertical and horizontal directions
• Power supply: 2 x ER18505 3.6 V Li-SOCI2 battery pack (8200 mAh)
  • Up to 14 years battery lifetime, standard configuration and operating temperature

• Digital inputs: 2
• 1-Wire input (up to 8 sensors)
• RS-485 input (up to 8 sensors)
• Analog inputs: 4 (2 x 0...10 VDC, 2 x 0...10 VDC / 4...20 mA, WEB control)
• Relay outputs: 4 (NO/NC)
• Setup via USB or SMS
• Data logger for up to 52 000 records
• Webserver
• Periodical upload of data logger file to a remote HTTP server
• HTTP Post, HTTP API
• Communication: 4G-LTE, 3G-WCDMA
• SMS alarms (up to 5 numbers)
• E-mail alarms (up to 5 recipients), SMT with TLS support
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...28 VDC

• 4G LTE supported frequency bands:
  • B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/ B66/B34/B38/B39/B40/B41
• 3G supported frequency bands:
  • B1/B2/B4/B5/B6/B8/B19
• 2G supported frequency bands:
  • B2/B3/B5/B8
• M2M communication protocols: MQTT, HTTP API (XML or JSON)
• Setup via WEB interface through the USB or remote setup with HTTP API or SMS commands
• Digital inputs: 2 “dry contacts”
• 1-Wire input (up to 4 sensors)
• Analog inputs: 2 (0...60 VDC)
• Relay outputs: 2 (NO/NC)
• E-mail alarms (up to 5 recipients), SMTP with TLS support
• SMS alarms (up to 5 recipients)
• GSM Geolocation (optional)
• Firmware update over the air (FOTA)
• Operating temperature: -20...+55 °C
• Supply: 10…28 VDC

TCG210-4 is a battery-powered 4G parcel temperature and humidity logger with fallback support for 2G communication. The device is compatible with HTTP/HTTPS API protocols, making it suitable for modern IoT applications. It periodically sends HTTP/HTTPS POST requests to a remote server, containing a status file in JSON format and the most recent logged data in CSV format.

• Global connectivity - Quad-band 4G LTE Cat.1 with 2G fallback ensures reliable operation worldwide.
• Battery-powered autonomy - Operates for months without external power, ideal for parcel monitoring and remote applications.
• Intelligent power management - Advanced sleep mode significantly extends battery life.
• Flexible configuration - Easy setup via Wi-Fi, SMS, or HTTP API.
• Real-time alerts - Instant SMS alarm notifications to up to five phone numbers.
• Integrated sensing - High-accuracy temperature and humidity sensor for critical parcel monitoring.
• Large data storage - Onboard memory for up to 70,000 logged records.
• Seamless IoT integration - Periodic HTTP/HTTPS POST with current status in JSON format.
• Data export - Automatic upload of logged data in CSV format to a remote server.
• Remote management - Full device control through HTTP API commands.
• Future-proof - Firmware update over Wi-Fi or 4G LTE keeps the device always up to date.
• Compact and lightweight - Designed for easy deployment in parcel logistics, cold chain transport, and warehousing.
• Safe for air transport - Powered by a compliant Li-SOCl₂ battery (IATA DGR, UN 3091, PI970 Section II), suitable for air shipment.

SKU: 5906660327066

• Efento Gateway automatically transfers gathered data from Efento BLE (Bluetooth Low Energy) sensors to Efento Cloud or any other IoT platform
• Gateway stores 500,000 measurements in its buffer memory in case the connection to Efento Cloud is lost, it will send the measurements right after connection is restored
• If Gateway used without Efento cloud it can store sensors data in its memory
• In local mode you can check the current and historical measurements (table/chart) and export the data in a form of CSV report
• Gateway communicates with sensors wirelessly over BLE. The maximum distance between Gateway and sensor is 100 m in the open space and 20 – 30 m in the buildings
• One gateway supports up to 128 Efento sensors
• Gateway can be integrated with any cloud platform or software that supports HTTP protocol (REST API)
• Configuration of Efento Gateway using any internet browser over LAN
• Ethernet connection for data transfer
• Power supply: 5 V, 1 A (mini USB)
• Operating temperature: 0…+40 °C

• Digital inputs: 2
• 1-Wire input (up to 8 sensors)
• RS-485 input (up to 8 sensors)
• Analog inputs: 4 (2 x 0...10 VDC, 2 x 0...10 VDC / 4...20 mA, WEB control)
• Relay outputs: 4 (NO/NC)
• Setup via USB or SMS
• Data logger for up to 52 000 records
• Webserver
• Periodical upload of data logger file to a remote HTTP server
• HTTP Post, HTTP API
• SMS alarms (up to 5 numbers)
• E-mail alarms (up to 5 recipients), SMT with TLS support
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...24 VDC

• Digital inputs: 2
• 1-Wire input (up to 4 sensors)
• Analog inputs: 2 (0...60 VDC)
• Relay outputs: 2 (NO/NC)
• Setup via USB or SMS
• Webserver
• HTTP Post, HTTP API
• SMS alarms (up to 5 numbers)
• E-mail alarms (up to 5 recipients), SMTP with TLS support
• Operating temperature: 0...40 °C
• Warranty: 3 years
• Supply: 10...28 VDC

The enLink Status-VC transmits data using long range LoRa wireless which easily integrates with cloud services or on-site Systems.

• 0…20 mA, 0…10 V or resistance input
• 12 bit resolution
• Communication: LoRaWAN; frequency range: 863-870 MHz; up to 16 km range
• Measurement sending interval: 30 s to 3 hours
• 2 x Li-SOCl2 (3.6V) AA sized batteries ensure 3+ years of operation
• Configuration via USB cable / downlink
• Case IP40 protection (IP 67 on request)

The enLink OAQ Vape transmits data using long range LoRa wireless which easily integrates with cloud services or on-site Systems.

• Sensed parameters: Temperature, Relative humidity, VOC, CO2, Particles PM (1.0, 2.5, 4.0 & 10), Barometric pressure, Ozone**, Arsine*, Formaldehyde*, Methyl Mercaptan*, Chlorine*, Carbon Monoxide*, Ethylene Oxide*, Hydrogen*, Hydrogen Sulphide*, Hydrogen Cyanide*, Ammonia*, Nitrogen Dioxide*, Oxygen*, Odorous gases*, Phosphine*, Sulphur Dioxide*
• Communication: LoRaWAN; frequency range: 863-870 MHz; up to 16 km range
• Measurement sending interval: 30 s to 3 hours
• Power supply: 12…24V V DC, 0.15 Amp (max) / 4 x Li-SOCl2 (3.6V) AA / external solar panel
• Configuration via USB cable / downlink
• IP rating: IP42 (conformally coated electronics), do not expose to direct sunlight
• Operating Temp. / Humidity: -10…40 °C / 0…95 % RH (be kondensacijos)

The enLink Status-P transmits data using long range LoRa wireless which easily integrates with cloud services or on-site Systems.

• 3 channels pulse counter (S0 standard) and monitor of state (open / closed)
• With the transmit on Change of State enabled the unit operates as a standard pulse counter and also transmits a message when the state of the input changes from closed to open or open to closed
• The pulse counts for each channel are written to memory every 5 – 10 minutes
• Communication: LoRaWAN; frequency range: 863-870 MHz; up to 16 km range
• Measurement sending interval: 30 s to 3 hours or adaptive (triggered by change of state)
• 2 x Li-SOCl2 (3.6V) AA sized batteries ensure 3+ years of operation
• Configuration via USB cable / downlink
• Case IP40 protection (IP 67 on request)

The enLink Status-T transmits data using long range LoRa wireless which easily integrates with cloud services or on-site Systems.

• External sensor measurement range: -55…+125 °C
  • Accuracy: ± 0.5 °C (-10…+85 °C)
• Up to two probes (cable length: 1 m, others on request)
• Communication: LoRaWAN; frequency range: 863-870 MHz; up to 16 km range
• Measurement sending interval: 30 s to 3 hours or adaptive (triggered by alarm)
• 2 x Li-SOCl2 (3.6V) AA sized batteries ensure 3+ years of operation
• Configuration via USB cable / downlink
• Each sensor can be programmed individually for different alarm type: No alarming, High threshold alarm, Low threshold alarm, In band alarm, Out of band alarm
• Each alarm type has an individual alarm status message with the following parameters: Alarm status, Total number of alarm activations, Alarm duration
• Case IP40 protection (IP 67 on request)

The Wx9xx series of sensors from COMET SYSTEM enables accurate measurement of temperature, relative humidity, and atmospheric pressure, with data transmitted via the low-power LoRaWAN network. This technology allows data to be sent to a cloud storage, where users can easily view both current and historical values through a standard web browser. Each sensor has an LCD display showing the measured value and battery status.

• Possibility to connect Pt1000 sensors
• Covers up to 15 km in rural areas and 2…5 km in urban areas
• Work with Comet System LoRaWAN gateway SP041
• Battery life: from 1 to 10 years depending on transmission time and environment temperature
• Unlimited space for data in cloud
• Alarm: email and app notification
• Mobile applications for Android and iOS

• The battery or mains powered wireless M-Bus gateway B4 is highly configurable plug-and-play device used for collecting data from Wireless M-Bus meters / sensors and transmitting the data using LTE CAT-M1 and MQTT protocol
• Long range and high sensitivity internal (or external mounted) antennas
• To maximize the battery lifetime possible configuration to listen number of minutes, specific time during day, specific days and limit number of packets stored per meter / week / day / hour
• The gateway firmware can be upgraded remotely using MQTT
• B4 series gateway can be used with Lansen R4 series repeaters and transmit additional information (see datasheet)
• Configuration can be done with: Lansen Wireless M-BUS programming dongle together with our program, Lansen Configurator, other wireless M-BUS transmitters or remotely using the MQTT protocol
• Possible to activate 128 bit AES-key encryption
• Gateway suited for harsh environments, operating temperature: -30…+85 °C, protection class: IP40, IP65 and IP67
• IoT LTE M SIM card needed (acquired separately)

• Operates as a temperature switch (thermostat), transducer, data logger
• Accumulated temperature data is read using a mobile phone with NFC interface
• Parametrization via NFC interface
• Display and electrical connection are independently rotatable 335°/343°
• Temperature measurement range: -50...+150 °C
• Analog output: 4...20 mA / 0...5 VDC /1...6 VDC / 0...10 VDC / switchable between mA and V
• Switch output: 2 x PNP
• Sensor: Pt1000 A
• Data logger memory: 3518 measurement points
• Measurement interval: 0,1...999,9 s
• Operating temperature: -25...+85 °C
• Supply: 15...30 VDC

• Sensor AR434 compatible with Wireless data logger AR407
• Input:
  • RTD: Pt100 / Ni100
  • TC: J / K / S / B / R / T / E / N
  • Analog: 0…20mA / 4…20mA / 0÷10V / 0…60mV
  • Resistance: 0…700Ω
• Radio transmission in ISM 868MHz band, range up to 200 m in open space (400 m when retransmission activated requires supplying sensor via the mini-USB port)
• Built-in measurement of ambient temperature (20…70 °C)
• LCD display showing the measured values, messages and errors
• Protection: IP20
• Power supply: battery (3.6 V, AA type)
• Battery lifetime: up to 2 years, at room temperature, with measurement period > 40 min and uninterrupted radio transmission
• Parameter configuration via USB serial interface
• Variation of device without LCD screen (AR433)

• MA series converters reads Wired M-Bus meters and transmit the data wirelessly using the Wireless M-Bus protocol
• Reads data from up to 500 devices
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: T1
• AES-128 encryption mode 5, profile A
• Automatically search wired meters and sends data
• Two internal antennas or one external antenna
• Power supply: 100…240 VAC
• Protection class: IP67

Sensor SKU: 5905309601192 (IP30)

Sensor SKU: 5905309601482 (IP67)

Wireless 4…20 mA / 0…10 V analog signal data logger, sensor interface, BLE allows users to connect analog sensors to the cloud**. Device can be equipped with up to four analog interfaces / transducers (2 x 4…20 mA and 2 x 0…10 V). Transducer can be powered* either from the device’s battery or by an external power source.

You can use a free mobile application to configure the device and read the data from its memory. If you add Efento Gateway, you can build a remote monitoring system.

• Communication: BLE (Bluetooth Low Energy)
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery (on request 1000 mAh rechargeable battery (USB 5V))
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• External transducers can be powered by the device's battery (max. 16V, 30 mA)
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -15…+70 °C / 0…99 %
• Case IP30 protection (IP 67 on request)

Sensor SKU: 5905309600072 (IP30)

Sensor SKU: 5905309600607 (IP67)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud** platform or any other third party systems.

• Wireless 4…20 mA / 0…10 V analog signal sensor interface, data logger, NB-IoT measures analog readings and can send data over NB-IoT
• Device can be equipped with up to four analog interfaces / transducers (2 x 4…20 mA and 2 x 0…10 V)
• Transducer can be powered* either from the device’s battery or by an external power source
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -35…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection (IP67 on request)

Sensor SKU: 5905309601338 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Atmospheric pressure measurement range: 300…1100 hPa, accuracy: absolute +/- 3 hPa in temperature 0…+65°C, relative +/- 0,12 hPa in temperature 0…+65°C
• Temperature measurement range: -35…+70 °C, accuracy up to 0,4 °C in the range from -20°C to +70°C and 0,5 °C in the range -35…-20 °C
• Relative humidity measurement range: 0…99 % RH, accuracy up to 4 % in 0…80 % RH and 7 % in the range 81…99 %
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -35…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327660 (IP30)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Atmospheric pressure measurement range: 300…1100 hPa, accuracy: absolute +/- 3 hPa in temperature 0…+65°C, relative +/- 0,12 hPa in temperature 0…+65°C
• Temperature measurement range: -15…+70 °C, accuracy: up to 0,4 °C
• Relative humidity measurement range: 0…99 % RH, accuracy 4 % in 0…90 % RH
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection

Sensor SKU: 5906660327868 (IP30)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud** platform or any other third party systems.

• Carbon dioxide (CO2) measurement range: 400…5000 ppm, accuracy: +/- (40 ppm + 5 % of reading)
• Atmospheric pressure measurement range: 300…1100 hPa, accuracy: absolute +/- 3 hPa in temperature 0…+65°C, relative +/- 0,12 hPa in temperature 0…+65°C
• Temperature measurement range: -15…+70 °C, accuracy: up to 0,4 °C
• Relative humidity measurement range: 0…99 % RH, accuracy 4 % in 0…80 % RH
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection

Sensor measures carbon dioxide (CO2) concentration, temperature, and atmospheric pressure. This device, belonging to the PRO sensor series, includes Aranet Sub-GHz ISM band radio which wirelessly transmits sensor measurements to the Aranet PRO base station.

• CO2 measurements:
  • Range: 0…9999 ppm
  • Resolution: 1 ppm
  • Accuracy: ± (30 ppm + 3 % of reading)
• Atmospheric pressure measurements:
  • Range: 300…1100 hPa
  • Resolution: 1 hPa
  • Accuracy: +3 hPa / -2 hPa
• Temperature measurements:
  • Range: 0…50 °C
  • Resolution: 0,1 °C
  • Accuracy: ± 0.3 °C
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Data encryption
• Supply: 1 x AA battery
• Battery lifetime (20 °C): up to 8 years
• Operating temperature: -40…60 °C
• Protection class: IP67

Measures analog signal of a 3rd party sensor. Provides 24 or 12 VDC power for a 3rd party sensor using the built-in power supply unit (PSU).

• Sensor compatible with base stations: PRO, PRO Plus ir PRO Plus LTE
• Current measurement range: 0...30 mA
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Operating temperature: -30...+80 °C
• Power supply: 85…265 VAC
  • 1 x AA battery is for to notify user in case of external
• Protection class: IP67

• Current measurement range: 0...30 mA
• Operational range (in line-of-sight): up to 3 km
• Cable length: 1 m
• Data transmission: 1, 2, 5, 10 min
• Data encryption
• Supply: 1 x AA battery
• Battery lifetime (20 °C): up to 10 years
• Operating temperature: -40...60 °C
• Protection class: IP68

Sensor SKU: 5905309601475 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Differential pressure measurement range: +/- 500 Pa, accuracy: up to 1 Pa
• Length of measuring tubes: 1 m (another lengths on request)
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh, 3xAA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -15…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327820 (IP30)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Differential pressure measurement range: +/- 500 Pa, accuracy: up to 1 Pa
• Length of measuring tubes: 1 m (another lengths on request)
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Case IP30 protection

Measure the difference in air pressure between two points as needed in HVAC (air filter condition), building automation and Pharma. This device, belonging to the PRO sensor series, includes Aranet Sub-GHz ISM band radio which wirelessly transmits sensor measurements to the Aranet PRO base station.

• Pressure range: ± 500 Pa
• Resolution: 0,02 Pa
• Accuracy: ± (0.10 Pa + 3 % of reading)
• Long term drift: 0,05 Pa / year
• Response time: (99 %) <1 s
• Calibrated for Air, N2
• Gas compatibility: Air, N2, O2
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Data encryption
• Supply: 1 x AA battery
• Battery lifetime (20 °C): up to 10 years
• Operating temperature: -40…60 °C
• Protection class: IP65

Sensor SKU: 5905309601376 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Device monitor state of relays or reed switches (1 channel for input)
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -35…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327714 (IP30)

Sensor SKU: 5905309600713 (IP67)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Device monitor state of relays or reed switches (1 channel for input)
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Sensor's configuration can be changed remotely from the cloud or with a mobile application over Bluetooth Low Energy
• Operating temperature: -35…+70 °C
• Case IP30 protection (IP67 on request)

Designed to monitor electrical, gas, and water meters, as well as other measurement devices that have a dry contact pulse output feature. This device, belonging to the PRO sensor series, includes Aranet Sub-GHz ISM band radio which wirelessly transmits sensor measurements to the Aranet PRO base station.

• Maximum pulse frequency: 25 Hz
• Minimum pulse width: 10 ms
• Minimum interval between pulses: 30 ms
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Data encryption
• Supply: 1 x AA battery
• Battery lifetime (20 °C): up to 10 years
• Operating temperature: -40...+60 °C
• Protection class: IP67

Sensor SKU: 5905309601512 (IP30)

Sensor SKU: 5905309601598 (IP67)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• External sensor measurement range: -70…+450 °C
  • Accuracy: to 0.3 °C in 0 °C and 1.8 °C in 300 °C
• Default probe cable length: 1 m (other lengths on request)
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh, 3xAA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -15…+70 °C / 0…99 %
• Case IP30 protection (IP 67 on request)

Sensor SKU: 5906660327806 (IP30)

Sensor SKU: 5905309600294 (IP67)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• External sensor measurement range: -70…+450 °C
  • Accuracy: up to 0.3 °C in the 0 °C and 1.8 °C in the 300 °C
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -15…+70 °C / 0…99 %
• Case IP30 protection (IP 67 on request)

Sensor SKU: 5905309603240

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Probe cable length: 15 m (0,1…200 m lengths available on request)
• Accuracy: 0,2 % or 0,5 % (FSO)
• Measuring environment: water (well, sea), high temperature liquids (up to 100 °C and corrosive liquids (available upon custom request)
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 5 seconds to 18 hours (configurable by the user)
• Measurement sending interval: 1 minute to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Case IP67 protection / Probe enclosure IP68 protection
• Sensor housing material: Stainless Steel (304 SST)

Sensor SKU: 5905309600959 (IP30)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud** platform or any other third party systems.

• Illuminance measurement range: 0…83000 lux
• Filtering: rejects > 99 % (typically) of IR (matches human eye)
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection

Sensor SKU: 5905309601321 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Indoor air quality IAQ measurement range: 0…500
• Temperature measurement range: -35…+70 °C, accuracy up to 0,4 °C in the range from -20°C to +70°C and 0,5 °C in the range -35…-20 °C
• Relative humidity measurement range: 0…99 % RH, accuracy up to 4 % in 0…80 % RH and 7 % in the range 81…99 %
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -35…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327813 (IP30)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Indoor air quality IAQ measurement range: 0…500
• Temperature measurement range: -15…+70 °C, accuracy: up to 0,4 °C
• Relative humidity measurement range: 0…99 % RH, accuracy 4 % in 0…80 % RH
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection

LoRa-Log-Meter is a wireless data logging system based on LoRaWAN communication technology. It is designed to collect data from LoRaWAN devices such as sensors, interfaces, and meters that monitor environmental, technological and industrial process parameters and transmit data packets to a LoRaWAN gateway.

Collected data is processed and stored in the gateway, and can be accessed via a web browser.

• Compatible with Synetica and others LoRaWAN devices: analog inputs (4–20 mA, 0–20 mA, 0–10 V), temperature sensors, pulse inputs (SO, NC/NO contacts) and others
• Individual alarm notifications based on specific sensors or contacts
• Alarm notifications via email and SMS
• Logging and review of errors and communication issues
• Remote access to the LoRa-Log-Meter system via 4G LTE, Wi-Fi, or LAN (Ethernet)
• Dynamic data visualization in graph (curve) format via a web browser
• Data export in CSV and PNG formats
• Password-protected user interface
• No subscription required for the gateway or sensors
• Remote configuration of data transmission intervals for devices via a web browser
• Communication range from sensor to gateway:
  • 15 km Outdoors (in plain sight)
  • 50–200 meters indoors or up to 7–8 walls*
• LoRaWAN devices powered by: 2 × AA 3.6 V lithium batteries or 5 V USB power

The LoRa-Log-Vape system, using LoRaWAN communication technology, is designed for detecting "vaping" and cigarette smoke. Sensors capture environmental parameters and, upon detecting an event, send a notification to the LoRaWAN receiver (gateway). The data is collected and processed in the receiver and can be viewed on a web page.

The LoRa-Log-Vape registration system consists of a wireless LoRaWAN sensor receiver and wireless Synetica “vape” sensors ENL-IAQ-Vape.

Sensor SKU: 5905309600096 (IP30)

Sensor SKU: 5905309601581 (IP67)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• External sensor measurement range: -200…+200 °C
  • Accuracy: up to 0.5 °C in the +200 °C and 1.3 °C in the -200 °C
• Default probe cable length: 1 m (other lengths on request)
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh, 3xAA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -15…+70 °C / 0…99 %
• Case IP30 protection (IP 67 on request)

Sensor SKU: 5906660327790 (IP30)

Sensor SKU: 5905309600263 (IP67)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• External sensor measurement range: -200…+200 °C
• Accuracy: up to 0.5 °C in the +200 °C and 1.3 °C in the -200 °C
• Default probe cable length: 1 m (other lengths on request)
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -15…+70 °C / 0…99 %
• Case IP30 protection (IP 67 on request)

• Device G2-DC designed to monitor state of relays or reed switches
• Input: 2 dry contacts
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: C, T, or S (selectable on order)
  • Standard T1-mode, transmission 90 seconds, encryption ON
• Transmission interval: configurable 60 s…1 h (selectable on order)
• Every message contains the contact status and battery level
• The message is sent as soon as a dry contact switch is detected
• AES-128 encryption mode 5, profile A (can be ordered with custom configuration)
• Power supply: 3.6V Li-SOCl2, AA battery
  • Warning about low battery
  • Up to 14 years battery lifetime, depending on configuration and operating temperature
• Operating temperature: -30…+85 °C (Recommended: +5…50 °C) (none condensing)

• G2-P pulse counter converts wired consumption meter into a wireless meter
• Types of devices: water, electricity, HCA, room sensor devices, etc.
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: configurable C, T, or S
  • AES-128 encryption mode 5, profile A
• Value format: 0,001...10000 / pulse (configurable). Unconverted dimensionless value
• The total number of pulses is sent periodically
• It is possible to count pulses from two devices simultaneously
• Pulses from the electricity meter LEDs can also be counted using an optical probe (only one optical probe can be mounted)
• Transmission interval: configurable 60 s…1 hour
• Tamper protection
• Operating temperature: -30…+85 °C none condensing (recommended +5…+50 °C)
• Power supply: AA battery 3.6 V Li-SOCI2
  • Battery lifetime up to 14 years, depends on configuration and operating temperature

• Range Extender increases the receiving range of the wM-BUS gateway up to 2x or more
• Filters out interferences such as 4G, LTE, TV and WLAN
• Communication: wM-BUS protocol EN13757-3/4:2013
  • Modes: S1, C1 and T1
• Complies with the OMS standard
• Only receive signals (Rx)
• Connected between antenna and gateway using standard SMA connector
• Mountable on DIN rail
• Power supply: 12…24 V AC / DC
• Working temperature: -40…85 °C

• R4 series repeaters have multihop routing function (up to 4 repeaters connected in serial)
  • uR (microreapeater) – only retransmits data of sensors to repeater
• Communication: Wireless M-BUS (868MHz) EN 13757-3/4:2013
  • Modes: T, C and S
• Complies with the OMS standard, OMS 4.0.2
• Support up to two external antennas or one vertical and one horizontal internal antenna (depending on model)
• Supports routing of Security profile A and B according to OMS 4
• Ability to forward messages of 932 devices
  • uR (microreapeater) - forward messages of 100 devices
• Flexible time settings of data collection and transmission
• Enclosure protection (selectable):IP40 (indoor) or IP65 / IP67 (outdoor)
• Battery lifetime: 10+ years (depending on the configuration)
• Power supply
  • Internal battery: 3.6 V Li-SOCI2
  • Mains: 100-240 V AC
  • 24 V AC / DC (on request)
• Operating temperature: -35…+85 °C

[Awaiting translation]

• Sensor C-TH measures ambient temperature and humidity
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: C, T, or S*
• Measurement ranges
  • Temperature: -40…+85 °C
  • Humidity: 20…80 % RH (non condensing)
• Measurement accuracy
  • Temperature: ± 0,2 °C in the range of 0…65 °C
  • Humidity: ± 2 % RH in the range of 20…80 %
• Transmission interval: 60 s…1 hour*
• AES-128 encryption mode 5, profile A, custom KEY
• Power supply: ER14505 3.6V Li-SOCl2 battery (soldered)
  • 14 years expected, standard configuration and operating temperature

• Sensor CX-TH measures ambient temperature and humidity
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: C, T, or S *
• Measurement ranges
  • Temperature: -40…+85 °C
  • Humidity: 20…80 % RH (non condensing)
• Measurement accuracy
  • Temperature: ± 0,2 °C in the range of 0…65 °C
  • Humidity: ± 2 % RH in the range of 20…80 %
• Transmission interval: 60 s…1 hour*
• AES-128 encryption mode 5, profile A, custom KEY
• Power supply: ER14505 3.6V Li-SOCl2 battery (soldered or optional battery holder)*
  • 14 years expected, standard configuration and operating temperature
• Operating temperature: 0...+55 °C
• * - T1-mode, 150 seconds, Encryption ON, unique key (individual options should be stated before order)

• Sensor O-TH designed to measure temperature and humidity in outdoor
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: C, T, or S (selectable on order)
  • Standard T1-mode, transmission 90 seconds, encryption ON
  • AES-128 encryption mode 5, profile A (can be ordered with custom configuration)
• Measurement range
  • Temperature: -40…+85 °C
  • Humidity: 0…100 % RH (none condensing)
• Accuracy
  • Temperature: ± 0,2 at 0..+85 °C and ± 0,3 at -40…+85 °C
  • Humidity: ± 2 %RH
• Transmission interval: custom ordered 60 s…1 h (standard 90 s)
• AES-128 encryption mode 5, profile A (can be ordered with custom configuration)
• Power supply: 3.6 V Li-SOCI2, ER17505 battery
  • Warning about low battery
  • Battery lifetime up to 16 with standard configuration and operating temperature
• Operating temperature: -30…+85 °C (Recommended: -20…+50 °C)

• Communication: wireless M-BUS
  • Mode: S / T
• Measurement accuracy
  • Temperature: ± 0,3 °C in the range of -10…55 °C
  • Humidity: ± 2 % in the range of 20…80 %
• Transmission interval: 1 / 5 / 10 / 15 min
• AES-128 encryption mode 5 according to OMS V3.0.1
• Supply: 2 replaceable AA cells
• Battery lifetime up to 10 years

• Sensor O-T-H designed to measure temperature in harsh environment
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: C, T, or S (selectable on order)
  • Standard T1-mode, transmission 90 seconds, encryption ON
  • AES-128 encryption mode 5, profile A
• Measurement range
  • Temperature: -40…+85 °C
• Accuracy
  • Temperature: ± 0,2 at 0..+85 °C and ± 0,3 at -40…+85 °C
• Transmission interval: custom ordered 60 s…1 h
• Power supply: ER17505 3.6V Li-SOCl2, battery
  • Warning about low battery
  • Battery lifetime up to 14 years, depending on configuration and operating temperature
• Operating temperature: -35…+85 °C (Recommended: -30…+50 °C)