Другие беспроводные

• Operates as a temperature switch (thermostat), transducer, data logger
• Accumulated temperature data is read using a mobile phone with NFC interface
• Parametrization via NFC interface
• Display and electrical connection are independently rotatable 335°/343°
• Temperature measurement range: -50...+150 °C
• Analog output: 4...20 mA / 0...5 VDC /1...6 VDC / 0...10 VDC / switchable between mA and V
• Switch output: 2 x PNP
• Sensor: Pt1000 A
• Data logger memory: 3518 measurement points
• Measurement interval: 0,1...999,9 s
• Operating temperature: -25...+85 °C
• Supply: 15...30 VDC

• Sensor AR434 compatible with Wireless data logger AR407
• Input:
  • RTD: Pt100 / Ni100
  • TC: J / K / S / B / R / T / E / N
  • Analog: 0…20mA / 4…20mA / 0÷10V / 0…60mV
  • Resistance: 0…700Ω
• Radio transmission in ISM 868MHz band, range up to 200 m in open space (400 m when retransmission activated requires supplying sensor via the mini-USB port)
• Built-in measurement of ambient temperature (20…70 °C)
• LCD display showing the measured values, messages and errors
• Protection: IP20
• Power supply: battery (3.6 V, AA type)
• Battery lifetime: up to 2 years, at room temperature, with measurement period > 40 min and uninterrupted radio transmission
• Parameter configuration via USB serial interface
• Variation of device without LCD screen (AR433)

Broadsens edge-computing wireless gateways connect and control multiple wireless low-power sensors such as SVT200-A, SVT300-A, SVT400-A, SVT200-V, SVT300-V and SVT400-V.

BroadVibra software is installed inside the wireless gateway. The software has intuitive interface and can be accessed from all major web browsers remotely. The software is ideal for predictive maintenance and conditional based monitoring.

• Communication with sensor: 2.4GHz BLE
• Up to 190 sensors supported
• Network interface: Ethernet, Wi-Fi 802.11ac wireless
• Communication protocol: MQTT, TCP/IP, UDP, Modbus TCP & RTU (RS-485), OPC UA
• Integrated Database: 64 / 128 GB
• Notifications and alarms sent by email (SMTP)
• Vibration analysis: Velocity, RMS, True peak, Peak-peak, STD, Crest factor, Kurtosis, trend analysis, FFT analysis, advanced filtering, frequency fine tuning, trigger modes
• Working environment: -30...+60 °C, 10...90 %RH
• Additional features: 2nd power connector, 2 x GPIO ports (input or output, see manual)

LoRa-Log-Meter is a wireless data logging system based on LoRaWAN communication technology. It is designed to collect data from LoRaWAN devices such as sensors, interfaces, and meters that monitor environmental, technological and industrial process parameters and transmit data packets to a LoRaWAN gateway.

Collected data is processed and stored in the gateway, and can be accessed via a web browser.

• Compatible with Synetica and others LoRaWAN devices: analog inputs (4–20 mA, 0–20 mA, 0–10 V), temperature sensors, pulse inputs (SO, NC/NO contacts) and others
• Individual alarm notifications based on specific sensors or contacts
• Alarm notifications via email and SMS
• Logging and review of errors and communication issues
• Remote access to the LoRa-Log-Meter system via 4G LTE, Wi-Fi, or LAN (Ethernet)
• Dynamic data visualization in graph (curve) format via a web browser
• Data export in CSV and PNG formats
• Password-protected user interface
• No subscription required for the gateway or sensors
• Remote configuration of data transmission intervals for devices via a web browser
• Communication range from sensor to gateway:
  • 15 km Outdoors (in plain sight)
  • 50–200 meters indoors or up to 7–8 walls*
• LoRaWAN devices powered by: 2 × AA 3.6 V lithium batteries or 5 V USB power

The LoRa-Log-Vape system, using LoRaWAN communication technology, is designed for detecting "vaping" and cigarette smoke. Sensors capture environmental parameters and, upon detecting an event, send a notification to the LoRaWAN receiver (gateway). The data is collected and processed in the receiver and can be viewed on a web page.

The LoRa-Log-Vape registration system consists of a wireless LoRaWAN sensor receiver and wireless Synetica “vape” sensors ENL-IAQ-Vape.

[Awaiting translation]

• Sensor AR437 compatible with Wireless data logger AR407
• Temperature measurement range: -30…+80 °C
• Humidity measurement range: 0…100 % RH
• Radio transmission in ISM 868MHz band, range up to 200 m in open space (400 m when retransmission activated requires supplying sensor via the mini-USB port)
• Protection: IP65
• Power supply: battery (3.6 V, AA type)
• Battery lifetime: up to 4 years, at room temperature, with measurement period > 30 min and uninterrupted radio transmission
• Parameter configuration via USB serial interface
• Device variation with external sensor (AR437/2)

• Sensor AR436 compatible with Wireless data logger AR407
• Temperature measurement range: -20…+70 °C / with external probe: -30…+80 °C
• Humidity measurement range: 0…100 % RH
• Radio transmission in ISM 868MHz band, range up to 200 m in open space (400 m when retransmission activated requires supplying sensor via the mini-USB port)
• LCD display showing the measured values, messages and errors
• Protection: IP20
• Power supply: battery (3.6 V, AA type)
• Battery lifetime: up to 2 years, at room temperature, with measurement period > 40 min and uninterrupted radio transmission
• Parameter configuration via USB serial interface
• Variation of device without LCD screen (AR435)

The sensor SVT200-T require to be used with Broadsens's wireless gateway and analysis software BroadVibra.

• Temperature measurement range: -40…+105 °C
• Accuracy / Resolution: ±0,3 °C / 0,01 °C
• Measurement and transmission interval: 15 seconds (Selectable: 1…60 s)
• Power supply: CR2450W Battery. Up to 10 years in continuous usage
• Wireless data transmission (BLE): 2.4GHz; up to 100 m in line of sight
• Certificates: FCC, IC, CE(EU), TELEC, KCC, NCC, WPC, RCM certified
• Mounting: Glue / epoxy. Screw mounting option available for SVT200-T-F case
• Protection class: IP68 waterproof
• Size / Weight: 39 mm x 14 mm / 30 g

The sensor SVT300-V require to be used with Broadsens's wireless gateway and advanced vibration analysis software BroadVibra.

• Alarm sent out in 0,5 second when accident detected
• Acceleration range: 2g to 16g auto adjustment
• Acceleration sampling rate: Low speed & 6.4kHz sampling rate dynamic adjustment based on vibration level
• Acceleration resolution: 16 bit
• -3dB bandwidth (Hz): x,y,z axis: 0.1Hz to 3.2kHz
• Temperature measurement range: -40…+125 °C
• Wireless data transmission (BLE): 2.4GHz; up to 300 m in open space. FCC / IC approved
• Battery life: 3…4 (12-hour running machine a day); 14250 battery, 1200 mAh
• Mounting: M6 screw hole or two screw-hole case
• Working temperature: -55…+85 °C; IP68 (IP69K optional)
• Explosive atmosphere: Intrinsic safe. ATEX & IECEx: Ex ia IIC T4 Ga; Ex ia IIIC T135 Da

DPC 8380 with display works as a data logger, a transducer with a display and as a pressure switch. Logged data is read using mobile phone via NFC interface. Parameters can be either set via integrated buttons or via NFC. Display and electrical connection are independently rotatable 335°/343°. These properties greatly increase the field of application.

DPS 8381 with display works as a data logger, a transducer with a display and as a pressure switch. Logged data is read using mobile phone via NFC interface. Parameters can be either set via integrated buttons or via NFC. Display and electrical connection are independently rotatable 335°/343°. These properties greatly increase the field of application.

• Range: 0...2,5 iki 0...600 bar / 0...30 iki 0...7500 psi
• Sensor type: Thick film on steel
• Accuracy:  ±0,5 %
• Output (chosen): 4...20 mA / 0...5 VDC / 0...10 VDC / 1...6 VDC
• Switching outputs: 2 x PNP
• Shown measuring units: bar, psi, MPa, kPa, m WC, mm WC
• Ambient temperature: -25...+85 °C
• Media temperature: -25...+85 °C
• Protection class: IP65
• Process connection: G1/4" m, R1/4" m, 1/4"NPT m, 1/2"NPT m
• Data logger memory: 3518 points

• Designed to replace cable data transmission into aerial
• Can be used in telemetric and information systems