Ничего не куплено!
Moisture measuring of sand, minerals, clay, grain, foodstuffs, sawdust, ores, sewage sludge. During operation, the sensor requires nothing but a power supply and a display or a controller that can receive the measurement signal. The BMMS sensor is designed for applications in which no multi-part systems are to be used but still the highest precision is required. Due to the in-process calibration, all potential interference from the sensor installation is directly compensated for.
Hay and straw moisture and temperature meter DRAMINSKI HMM works by measuring electrical conductivity variation. HMM measures hay/straw moisture and indicates it on the LCD screen. Measured value is shown in percentage. Device can measure temperature. Has internal memory which stores last 50 measurements. Shows maximal, minimal and average values.
Technical parameters
Measuring range:
Moisture
Temperature
10...80%
1…100°C
..
- Designed to measure the moisture of hay and straw
- Moisture measurement method: resistive
- Moisture range: 8...50 %
-24%- For peat moisture measurement in range of 30...80 %
- Accuracy: 10 % of measured value
- Step value: 1 %
- Sample volume: 120 cm3
- Sample pressure: 0,2 MPa
- Display: LCD
- Supply: 12 V battery
471.90 € 356.95 €
Без НДС: 295.00 €
- Capacitive moisture measurement
- Temperature range of measuring material: 4...50 °C
- Direct measured values transfer from the sensor
- Calibration is made directly at sensor, beyond the process
- G-7 is designed for moisture measurement of grain
- Moisture measurement range: 9...30 %, depends on grain type
- Built-in calibrations for barley, coffee, corn, flax, hay, oats, pasta, rapeseed, rough rice, rye, sorghum, soybeans and wheat
- Built-in temperature correction over the range of 0...70 °C
- Programmable offset to match elevator
- Stores up to 150 accumulated readings in user-defined batches by grain
- Displays the average and highest readings, standard deviation, co-efficient of variance oh stored readings
- Built-in connector accepts any Delmhorst electrode
- Built-in calibration check
- Audible, adjustable alarm
- Size: 180 x 150 x 140 mm
- Weight: 1800 g
- Rugged construction ensures years of reliable use
- Supply: 9 V battery
- 1-year warranty
- FX-2000 is designed for moisture measurement of hay, straw, windrow and bales
- Moisture measurement range: 6...40 %
- Bright, clear digital display
- Can be used for on-the-go moisture monitoring or as a portable meter
- In continuous mode:
• Takes two readings every second
• Displays the average and highest of eight accumulated readings
• Readings updated every 4 seconds
• Built-in backlight
• Connects to tractor power supply - In portable mode:
• Averages up to 100 accumulated readings
• Displays average and highest of accumulated readings - Built-in calibration check
- Audible, adjustable alarm
- Operating temperature: 0...50 °C
- Size: 200 x 80 x 40 mm
- Weight: 285 g
- Rugged construction ensures years of reliable use
- Optional sturdy plastic carrying case
- Supply: 9 V battery
- 3-year warranty
- Capacitive moisture measurement
- Up to 16 sensors per signal processing unit
- Temperature range of measuring material: 4...80 °C
- Measured value transfer: Profibus DP or analogue standard signal (e.g. 4...20 mA) optional
- Continuous measurement or batch operation