Измерение и контроль влажности

• Temperature measurement range: -20...+60 °C
• Humidity measurement range: 0...100 %RH
• Pressure measurement range: 600...1100 hPa
• CO2 concentration measurement range: 0...5000 ppm
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: 1 s...24 h
• Internal sensors
• GSM modem (GPRS)
• SMS and JSON messages can be sent via GPRS data connection
• Messages can be sent on alarms and periodically
• Data can be transferred to PC via USB-C interface
• Calibration certificate of manufacturer included
• Ambient temperature: -20...+60 °C
• Supply: 5200 mAh LiIon battery
• Protection class: IP20
• Warranty: 3 years

• Universal air and environment quality sensor E2-CO2-series measures CO₂ (carbon dioxide) level, temperature, humidity, pressure, sound level, ambient light (LUX). Transmits instant values, average hourly values, and average 24-hour values
• Communication: wM-BUS EN13757-3/4:2013, complies OMS 4.0.2
  • Modes: C1-A/B, T1 or S1 (selectable on order)
• Measurement ranges
  • Temperature: -40…85 °C
  • Humidity: 0…100 % RH (non-condensing)
  • CO2: 0…5000 ppm (0…55 °C)
  • LUX: 0,01…83000 LUX at same frequency as the human eye
  • Absolute pressure: 20…100 kPa
  • Sound level: 53…90 dBa at 850 Hz
• Measurement accuracy
  • Temperature: ± 0,2 at +5…+60 °C; ± 0,5 at -20…+85 °C
  • Humidity: ± 2 % RH at 20…80 % RH; ± 3 % RH at 10…90 % RH; ± 3,5 % RH at 0…100 % RH
  • CO2: ± (50 ppm + 3%)
  • LUX: 4 %
  • Pressure:  0,4 kPa
• CO2 sensor calibrates every 20 days
• Warnings about low battery, CO₂ sensor malfunction, calibration not performed yet
• Transmission interval: every 90 seconds
• Measured values sample interval: every 6 minutes
• LED and sound indication about CO₂ exceeded limit
• Device has 2 antennas for maximum range in both vertical and horizontal directions
• Power supply: 2 x ER18505 3.6 V Li-SOCI2 battery pack (8200 mAh)
  • Up to 14 years battery lifetime, standard configuration and operating temperature

TSM400-1-TH is a digital temperature and humidity sensor with a 1-Wire interface. Suitable for monitoring air quality of server rooms, data centers, offices and stores.

• Temperature measurement range: -20…+60°C
  • Accuracy (min): ± 0,4 °C (in -10…+60°C range)
  • Accuracy (max): ± 0,6 °C (in -20…+60°C range)
  • Resolution: 0,1 °C
• Relative humidity measurement range: 10 to 90% (non-condensing)
  • Accuracy (min): ± 3.0 % RH (in 20…80 % RH range)
  • Accuracy (max): ± 5.0 % RH (in 10…90 % RH range)
  • Resolution: 0,1 %RH
• Excellent long-term stability
• The unique 64-Bit serial number for multi-sensors support
• Ingress protection: IP20
• Operating voltage range: 4,5…26 VDC

TCG210-4 is a battery-powered 4G parcel temperature and humidity logger with fallback support for 2G communication. The device is compatible with HTTP/HTTPS API protocols, making it suitable for modern IoT applications. It periodically sends HTTP/HTTPS POST requests to a remote server, containing a status file in JSON format and the most recent logged data in CSV format.

• Global connectivity - Quad-band 4G LTE Cat.1 with 2G fallback ensures reliable operation worldwide.
• Battery-powered autonomy - Operates for months without external power, ideal for parcel monitoring and remote applications.
• Intelligent power management - Advanced sleep mode significantly extends battery life.
• Flexible configuration - Easy setup via Wi-Fi, SMS, or HTTP API.
• Real-time alerts - Instant SMS alarm notifications to up to five phone numbers.
• Integrated sensing - High-accuracy temperature and humidity sensor for critical parcel monitoring.
• Large data storage - Onboard memory for up to 70,000 logged records.
• Seamless IoT integration - Periodic HTTP/HTTPS POST with current status in JSON format.
• Data export - Automatic upload of logged data in CSV format to a remote server.
• Remote management - Full device control through HTTP API commands.
• Future-proof - Firmware update over Wi-Fi or 4G LTE keeps the device always up to date.
• Compact and lightweight - Designed for easy deployment in parcel logistics, cold chain transport, and warehousing.
• Safe for air transport - Powered by a compliant Li-SOCl₂ battery (IATA DGR, UN 3091, PI970 Section II), suitable for air shipment.

• Temperature measurement range: -30...+80 °C
• Humidity measurement range: 0...100 %
• Output: RS-485 Modbus RTU
• Calculates absolute humidity and dew-point temperature
• Cable length: 2 m / 2 m with M8 connector / 5 m / 10 m
• Operating temperature: -20...+60 °C
• Supply: 9...28 VAC/VDC

Ambient humidity and temperature logger TERMIOPLUS-S with external sensor is designed for logging of ambient humidity and temperature in its internal memory.

• Temperature range: -30...+70°C
  • Temperature accuracy: In range -30...+70 °C: ± 0,3 °C
  • Resolution: 0.1
• Humidity range: 0...100 % RH
  • Humidity accuracy: ±2 %RH at 25 °C (30…70 %RH); ±3 %RH at 25 °C (10…90 %RH); ±4 %RH at 25 °C (0…100 %RH)
• Memory: 32000 (16000 temperature and 16000 humidity)
• USB interface for data download
• Logging interval: 15 s...10000 min
• Supply: 2xAA battery, 3.6 V
• Battery lifetime: 1 one year with 30 min. interval recording at +10 °C
• Size: 45 x 100 x 19 mm

The BDX-30 and BDX-20 is the newest in the legendary “BD Series” pin meters for the building trades. This rugged meter has an ergonomic design with an easy grip handle and large tactile buttons for comfort and usability. Equipped with a custom, LCD display and intuitive user interface, users can quickly obtain accurate readings.

• Large, custom display with auto backlight - easy to read under all conditions
• On-screen statistics for up to 100 readings saved to the meter
  • High, Low, Average, Standard Deviation
• Measuring Range:
  • Wood (Douglas Fir) 6%-60%
  • Drywall 0.1%-6%
  • Reference 1-100
• Wood temperature correction (°F / °C)
• Select from 37 wood species and materials
• Bluetooth® connectivity to EDGE® app (BDX-30)
  • Timestamp and geotag, Data export to .csv format, Save unlimited readings
• Color-coded LED’s – adjustable through EDGE® app (BDX-30)
• Alarm set point - alerts to user-selected MC level
• Internal calibration check
• "Low Batt" warning with audio
• Auto off timer. Set to 1m, 4m or 10m
• Compatible with all Delmhorst electrodes
• Power: 2x AA Alkaline batteries
• Temperature Correction Range: 0…255 °F (-18…+124°C)

Moisture measuring of sand, minerals, clay, grain, foodstuffs, sawdust, ores, sewage sludge. During operation, the sensor requires nothing but a power supply and a display or a controller that can receive the measurement signal. The BMMS sensor is designed for applications in which no multi-part systems are to be used but still the highest precision is required. Due to the in-process calibration, all potential interference from the sensor installation is directly compensated for.

Carbon dioxide (CO₂), temperature and humidity transmitter with a display CDT2000.

• Carbon dioxide (CO₂) range: 400...2000 ppm
• Humidity range: 0...100 % 
• Temperature range: 0...50 °C

• Measures carbon dioxide concentration in air, temperature, humidity
• Calculates dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
• Measurement ranges: 0...2000 ppm, -30...+80 °C, 5...95 %RH
• Output: Ethernet
• Optional connection to WiFi network via tiny wireless router TL-WIFI
• Webserver
• Measurement interval: 2 s; CO2: 15 s
• Alarm protocols: E-mail, SNMP Trap, Syslog
• Supply: 9...30 VDC
• Protection class: IP30
• Calibration certificate included

• Measures carbon dioxide concentration in air, temperature, humidity
• Calculates dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
• Measurement ranges: 0...10000 ppm, -30...+105 °C, 5...95 %RH
• Temperature and humidity sensor cable length: 1 / 2 / 4 m
• Carbon dioxide concentration sensor cable length: 1  2 / 5 / 10 m
• Output: Ethernet
• Optional connection to WiFi network via tiny wireless router TL-WIFI
• Webserver
• Measurement interval: 2 s; CO2: 15 s
• Alarm protocols: E-mail, SNMP Trap, Syslog
• Supply: 9...30 VDC
• Protection class: IP30
• Calibration certificate included

SM400-4-CPTH is a multi-sensor that supports MODBUS RTU protocol over the RS-485 interface. The sensor measures CO2 concentration, humidity, temperature and barometric pressure. Suitable for environmental quality monitoring, indoor air, smart ventilation systems, restaurants and breweries CO2 level and CO2 leakage control.

• Changeable bitrate and other communication parameters
• Non-volatile memory for all setting
• Temperature measurement range: -20 to 60°C
  • Accuracy (min): ±0.4 °C (in -10 to +60°C range)
  • Accuracy (max): ±0.6 °C (in -20 to +60°C range)
  • Resolution: 0.1 °C
• Relative humidity measurement range: 10 to 90% (non-condensing) *
  • Accuracy (min): ±3.0 %RH (in 20 to 80 %RH range)
  • Accuracy (max): ±5.0 %RH (in 10 to 90 %RH range) *
  • Resolution: 0.1 %RH
• CO2 measurements range: 400…5000 ppm
  • Accuracy: ± (40 ppm + 5 %)
  • Resolution: 1 ppm
  • Calibration: Automatic, if the sensor is exposed to fresh air for more than 30 minutes
• Pressure measurements range: 10 to 1200 hPa
  • Accuracy (min): ±1.5 (25°C, 750 hPa)
  • Accuracy (max): ±2.5 (-20°C to + 85°C, 300 to 1100 hPa)
  • Resolution: 1 hPa
• Ingress protection: IP20
• Operating voltage range: 4.5…26 VDC

Temperatre, humidity and pressure meters, loggers Cxxxx, Dxxxx.
Cxxxx are designed for indication (without data logging), Dxxxx indicates and logs listed parameters.

• Applications of flue gas analyzer Si-Ca 130: boilers, burners, water heaters and furnaces
• Detectable gases: O₂, CO, CO(H₂), CO₂, NO, Low NO, NOx, Low NOx
• Up to three gas sensors
• CO measurement up to 8000 ppm
• Other measurement parameters: flue temp., air temp., differential temp., pressure / draft, excess air, combustion efficiency, combustion efficiency (condensation), stack gas velocity
• Color graphical touchscreen for control
• Communication: USB, Bluetooth (mobile App), remote printer
• Measurement storage: 2000 data points + smartphone and PC
• Predictive maintenance with estimated sensor life and calibration reminders
• Protection class: IP42
• Power supply: Rechargeable battery, Li-Ion 5100 mA/h 3.6 V (8 hours working time)
• Operating temperature: -5…+45 °C
• Sensor protection by pump stopping

TSH202B is a compact humidity and temperature sensor with 1-Wire interface. It is ideal for use in a variety of applications where space is limited, such as environmental monitoring systems, HVAC control, and more.

• Fully calibrated digital output
• Excellent long-term stability
• A unique 64-bit serial number for multi-sensor systems
• 3.0% relative humidity accuracy
• 12-bit resolution for humidity measurements
• 14-bit resolution for temperature measurements

• With display and operation via keys, three display pages for temperature humidity and other parameters to show
• 4...20 mA analogue output, alarm relay connection, Modbus-RTU (RS-485)
• Extreme long-term stability, quick response time
• Sensor diagnostic with CS service software
• Suitable to measurement in granulate dryers, compressed refrigerating gases 

• Extreme long-term stability, quick response time
• Sensor diagnostic with CS service software
• 4...20 mA analogue output, Modbus-RTU (RS-485)
• Suitable to measurement residual moisture, dew point after granulate driers in plastic industry and various gases

• RS-485 (Modbus) protocol temperature and humidity sensor
• Temperature measurement range: -20...+60 °C
• Humidity temperature range: 5...95 %RH
• Accuracy: ±3 %RH (20...80 %RH) / ±5 %RH (5...95 %RH) / ±0,4 °C (-10...+60 °C) / ±0,6 °C (-20...+60 °C)
• Resolution: 12 bits for temperature and humidity
• Long-term stability
• Warranty: 3 years

• 1-Wire protocol temperature and humidity sensor
• Temperature measurement range: -20...+60 °C
• Humidity temperature range: 10...90 %RH
• Accuracy: ±3 %RH (20...80 %RH) / ±5 %RH (10...90 %RH) / ±0,4 °C (-10...+60 °C) / ±1 °C (-20...+60 °C)
• Resolution: 14 bits for temperature, 12 bits for humidity
• Long-term stability
• Warranty: 3 years

• 1-Wire protocol temperature and humidity sensor
• Temperature measurement range: -20...+60 °C
• Humidity temperature range: 10...90 %RH
• Accuracy: ±3 %RH (20...80 %RH) / ±5 %RH (10...90 %RH) / ±0,4 °C (-10...+60 °C) / ±1 °C (-20...+60 °C)
• Resolution: 14 bits for temperature, 12 bits for humidity
• Long-term stability
• Warranty: 3 years
• Connection: RJ-11

• RS-485 protocol temperature and humidity sensor
• Temperature measurement range: -20...+60 °C
• Humidity temperature range: 5...95 %RH
• Accuracy: ±3 %RH (20...80 %RH) / ±5 %RH (5...95 %RH) / ±0,4 °C (-10...+60 °C) / ±0,6 °C (-20...+60 °C)
• Resolution: 14 bits for temperature, 12 bits for humidity
• Long-term stability
• Warranty: 3 years
• Connection: RJ-45

Multifunctional indoor climate sensor AERASGARD RFTM - LQ - PS - CO2 - Modbus with with LCD display.

• Temperature measuring range / deviation: 0…+50 °C / ± 0,2 °C at +25 °C
• Humidity measuring range / deviation: 0…100 % RH / ± 2 % RH (20…80 % RH), at 25 °C, otherwise ± 3 %
• CO2 Measuring range / accuracy: 0…5000 ppm / ± 30 ppm ± 3 % of measured value
• Particulate matter (PM) measuring range / accuracy: 0…50 μg/m³ 0…100 μg/m³ 0…300 μg/m³ 0…500 μg/m³
• Particulate matter (PM) accuracy ± 10 μg/m3 (± 10 % of measured value) at PM 2.5, ± 25 μg/m3 (± 25 % of measured value) at PM 10
• Air quality (VOC) measuring range: 0…100 %
• Data output:  galvanically separated RS-485 Modbus RTU interface
• Variants: with / without LCD display
• One sensor covers about 30 m² of room area
• Power supply: 24 V ac/dc (200 mA)
• Standards: CE, EN 61 326, EMC Directive 2014/ 30/ EU, 2014/ 35/ EU

• Fuel sawdust moisture meter WTR-2A is designed to measure moisture of sawdust, scobs, wood shavings, slivers and other finely crumbled wood waste used as fuel
• Range: 35...85 %
• Sample volume: 120 cm²
• Measuring sample: 0,2 MPa

• Portable, small dimension grain moisture meter
• The sample is ground, increasing the measurement accuracy
• External probes can be connected
• Temperature measurement accuracy: ±0,5 °C
• Moisture measurement accuracy: ±0,5 %
• Automatic temperature compensation
• Calibrated for more than 400 grain species
• 2” LCD screen
• USB connection for software updates and data transfer
• Supply: 4xAA (1,5 V), 1xCR2032 (3 V)

• Portable, small dimension grain moisture meter
• Temperature measurement accuracy: ±0,5 °C
• Moisture measurement accuracy: ±1 % (in range up to 10 %)
• Calibrated for more than a hundred grain types (the list can be extended)
• Automatic temperature compensation
• 2” LCD screen
• USB connection for software updates
• Supply: 2xAA (1,5 V, LR6)

• Portable, small dimension grain moisture meter
• The sample is ground, increasing the measurement accuracy
• Temperature measurement accuracy: ±0,5 °C
• Moisture measurement accuracy: ±0,5 %
• Calibrated for more than 400 grain types
• Automatic temperature compensation
• 2” LCD screen
• USB connection for software updates
• Supply: 1x6LF-22 (9 V)

• Portable, small dimension grain moisture meter
• The sample is ground, increasing the measurement accuracy
• Temperature measurement accuracy: ±1 °C
• Moisture measurement accuracy: ±0,5 %
• Automatic temperature compensation
• LCD screen
• Supply: 4xAA (1,5 V), 1xCR2032 (3 V)

• Measures temperature, humidity, calculates dew point
• Temperature measurement range: -20...+60 °C
• Humidity measurement range: 0...100 %
• Memory: up to 500,000 values in non-cyclic mode (350,000 in cyclic)
• Logging interval: 10 s...24 h
• Display and alarm refresh interval: 1 s...1 min
• Protection class: IP67
• Warranty: 3 years
• Calibration certificate of manufacturer is included (according to EN ISO/IEC 17025)
• Free analytical software COMET Vision

• Designed to measure the moisture of hay and straw
• Moisture measurement method: resistive
• Moisture range: 8...50 %

SM400-4-TH humidity and temperature sensor supports MODBUS RTU protocol over the RS-485 interface. Suitable for environmental quality monitoring offices, server room, data center and indoor air

• Changeable communication parameters
• Non-volatile memory for all settings
• Operating temperature range: -20…60°C
  • Accuracy (min): ± 0.4 °C (in -10…+ 60 °C range)
  • Accuracy (max): ± 0.6 °C (in -20…+ 60 °C range)
  • Resolution: 0.1 °C
• Operating relative humidity range: 10…90% (non-condensing)
  • Accuracy (min): ± 3.0 % RH (in 20…80 % RH range)
  • Accuracy (max): ± 5.0 % RH (in 10…90 % RH range)
  • Resolution: 0.1 % RH
• Ingress protection: IP20
• Operating voltage range: 4.5…26 VDC

• Temperature measurement range: 0...50 °C
• Humidity measurement range: 0...100 %
• Output: 2 x 0...10 V / 2...10 V / 4...20 mA
• Option: LCD display
• Option: relay output
• Option: Modbus RTU
• Supply: 24 VDC/VAC
• Operating temperature: 0...50 °C
• Protection class: IP20

• Temperature measurement range: 0...50 °C
• Humidity measurement range: 0...100 %
• Output: 2 x 0/2...5/10 VDC
• Option: LCD display
• Option: Modbus RTU
• Supply: 24 VDC/VAC
• Operating temperature: 0...50 °C
• Protection class: IP54

• Temperature measurement range:
  a) Ambient model: -20...+80 °C
  b) Remote model with polycarbonate probe: -20...+80 °C
  c) Remote model with stainless steel probe: -40...180 °C
• Relative humidity measurement range: 0...100 %
• Calculates dew point, absolute humidity, enthalpy and combination ratio
• 4-wire analog output: 0...5/10 V or 0/4...20 mA
• 2 relay outputs
• Versions with or without display
• Protection class: IP65 (ABS V0 housing)

HST comes in three models, HST-M – standard model (IP20), HST-D – remote sensor (IP65) and HST-A – channel model (IP65).

Indoor temperature meter / transducer Txx18, designed for temperature, humidity and barometric pressure measurement.

The enLink OAQ Vape transmits data using long range LoRa wireless which easily integrates with cloud services or on-site Systems.

• Sensed parameters: Temperature, Relative humidity, VOC, CO2, Particles PM (1.0, 2.5, 4.0 & 10), Barometric pressure, Ozone**, Arsine*, Formaldehyde*, Methyl Mercaptan*, Chlorine*, Carbon Monoxide*, Ethylene Oxide*, Hydrogen*, Hydrogen Sulphide*, Hydrogen Cyanide*, Ammonia*, Nitrogen Dioxide*, Oxygen*, Odorous gases*, Phosphine*, Sulphur Dioxide*
• Communication: LoRaWAN; frequency range: 863-870 MHz; up to 16 km range
• Measurement sending interval: 30 s to 3 hours
• Power supply: 12…24V V DC, 0.15 Amp (max) / 4 x Li-SOCl2 (3.6V) AA / external solar panel
• Configuration via USB cable / downlink
• IP rating: IP42 (conformally coated electronics), do not expose to direct sunlight
• Operating Temp. / Humidity: -10…40 °C / 0…95 % RH (be kondensacijos)

The Wx9xx series of sensors from COMET SYSTEM enables accurate measurement of temperature, relative humidity, and atmospheric pressure, with data transmitted via the low-power LoRaWAN network. This technology allows data to be sent to a cloud storage, where users can easily view both current and historical values through a standard web browser. Each sensor has an LCD display showing the measured value and battery status.

• Possibility to connect Pt1000 sensors
• Covers up to 15 km in rural areas and 2…5 km in urban areas
• Work with Comet System LoRaWAN gateway SP041
• Battery life: from 1 to 10 years depending on transmission time and environment temperature
• Unlimited space for data in cloud
• Alarm: email and app notification
• Mobile applications for Android and iOS

• Long-lasting stainless steel screw electrodes
• Measurement range: 7...20 % (-40...+125 °C)
• Resolution: 0,1 %
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Electrode cable: FEP, -50...+200 °C, 5/10/15 m
• Timber temperature compensation
• Electrode length: 15 / 25 mm
• Supply: 11...30 VDC
• Protection class: IP68

• Moisture reading range:
  • 4…18 % for Lint cotton
  • 6…20 % for Seed cotton
  • 12…30 % for Wool
  • 6…25 % Viscose / Rayon
• Large, custom display with auto backlight and modern light case for comfort use
• On-screen statistics for up to 100 readings saved to the meter (High, Low, Average, Standard Deviation)
• Bluetooth® connectivity to EDGE® app. timestamp and geotag, data export to .csv format, save unlimited readings, customize LED ranges
• Alarm set point - alerts to user-selected moisture level (Color-coded LEDs alerts – adjustable through EDGE® app)
• Internal calibration check
• “Low Batt” warning with audio
• Auto off timer.  Set to 1m, 4m, or 10m
• Compatible with existing Delmhorst prods and electrodes
• Power: 2x AA Alkaline battery (Working hours: 125…150)
• Temperature Correction Range: -18…+124 °C
• QR code on meter for easy access to support materials and meter registration
• Size: meter only 20,40 x 7.24 x 4.06 cm
• Weight: meter only: 218 gr
• 2-year warranty on manufacturer’s defects. Bonus warranty with on-line registration

• Moisture reading range:
  • Hay: 6…40 %
  • Hops: 8…23 % (FX-30)
  • Hemp: 7…34 % (FX-30)
  • Tobacco: 8…37 % (FX-30)
  • Brazil Nuts: 6…25 % (FX-30)
  • Dates: 6…25 % (FX-30)
• Large, custom display with auto backlight and modern light case for comfort use
• On-screen statistics for up to 100 readings saved to the meter (High, Low, Average, Standard Deviation)
• Bluetooth® connectivity to EDGE® app (FX-30). timestamp and geotag, data export to .csv format, save unlimited readings, customize LED ranges
• Alarm set point - alerts to user-selected moisture level (Color-coded LEDs alerts – adjustable through EDGE® app FX-30)
• Internal calibration check
• “Low Batt” warning with audio
• Auto off timer.  Set to 1m, 4m, or 10m
• Compatible with existing Delmhorst prods and electrodes
• Power: 2x AA Alkaline battery (Working hours: 125…150)
• Temperature Correction Range: -18…+124 °C
• QR code on meter for easy access to support materials and meter registration
• Size: meter only 20,40 x 7,24 x 4,06 cm
• Weight: meter only: 218 gm
• 2-year warranty on manufacturer’s defects. Bonus warranty with on-line registration

The JX-30 features the Delmhorst EDGE™ App with expanded wood species, customizable settings, and the ability to share data from any location.

• Moister measurement range: 6…60% Wood (Douglas Fir)
• Large, custom display with auto backlight – easy to read under all conditions
• Species: 74 plus 123 additional available through EDGE™ App
• Wood temperature correction (°F/°C)
• Pins/electrode correction (insulated or non-insulated)
• Alarm set point: alerts to user-selected moister level
• On-screen statistics: High, Low, Average, Standard Deviation, View all readings
• Internal calibration check
• “Low Batt” warning with audio
• Auto off timer. Set to 1 min, 4 min or 10 min
• Integral contact pins max 5/16” penetration (use 2498/A-100)
• Compatible with any Delmhorst external electrode
• Color-coded LED’s: adjustable through EDGE ™app
• Power: 2x AA batteries – Alkaline Energizer (included)
• QR code on meter for easy access to support materials
• Size: meter only: 220 mm x 72mm x 39mm; in carry case - 241mm x 165mm x 64mm
• Weight with case: 510 g

• Moisture reading range:
  • 4,3…18 % moisture for paper (kraft paper calibration)
  • 5…40 % for baled scrap paper (PX-30)
  • 0…100 reference scale for obtaining relative moisture levels on other materials without calibration (PX-30)
• Large, custom display with auto backlight and modern light case for comfort use
• On-screen statistics for up to 100 readings saved to the meter (High, Low, Average, Standard Deviation)
• Bluetooth® connectivity to EDGE® app (PX-30). timestamp and geotag, data export to .csv format, save unlimited readings, customize LED ranges
• Alarm set point - alerts to user-selected moisture level (Color-coded LEDs alerts – adjustable through EDGE® app PX-30)
• Internal calibration check
• “Low Batt” warning with audio
• Auto off timer.  Set to 1m, 4m, or 10m
• Compatible with existing Delmhorst prods and electrodes
• Power: 2x AA Alkaline battery (Working hours: 125…150)
• Temperature Correction Range: -18…+124 °C
• QR code on meter for easy access to support materials and meter registration
• Size: meter only 21.97 x 7.24 x 4.06 cm
• Weight: meter only: 218 / 244 gm
• 2-year warranty on manufacturer’s defects. Bonus warranty with on-line registration

• Paper moisture and temperature meter WCPT-100P, made by Tanel (Poland)
• Moisture range: 20...95 %RH; Ambient temperature: -5...+60 ºC

• Measured parameters (with respective sensors):
  a) Temperature (Pt100 or thermocouple)
  b) Humidity
  c) Air quality
  d) Air velocity
  e) Airflow
  f) Tachometry
• Two inputs for Pt100 temperature sensors (range -200...600 °C)
• Up to 6 measurements simultaneously
• Power supply: Lithium-Ion battery (up to 57 hours)
• Calibration certificate, additional battery, transport case included
• Operating temperature: 0...50 °C
• Protection class: IP54

SIRO is an indoor air quality transmitter with a modern design. The transmitter is available with several optional air quality sensors. The modular device can be equipped with CO2 concentration and VOC (Volatile Organic Compounds) measurements or alternatively PM (Particulate Matter) measurement, and in addition, temperature and humidity measurements. SIRO-MOD series models use Modbus serial communication protocol.

• Measuring elements:
  • CO2: Non-dispersive infrared (NDIR); 0...2000 ppm
  • VOC: Complementary Metal Oxide Semiconductor (CMOS); range: * - see datasheet
  • PM: Laser-based light scattering particle sensing
  • Temperature: Integrated to CMOS
  • Relative humidity: Thermoset polymer capacitive sensing element
• Field configurable outputs for selected measurements; Configuration possible through MODBUS
• Proportional output options including voltage (0–10 V, 0–5 V, 2–10 V) and optional current (4–20 mA); MODBUS
• Offset feature enabling field calibration for each measurement parameter (CO2, VOC, PM, RH, T)
• Optional LCD-display and buttons
• Operating temperature: 0…50 °C
• Protection standard: IP20

PoE (power over Ethernet) temperature, relative air humidity, atmospheric pressure meters T4611, T3611, T7611. Only to be used with external sensors.

Application:

• Storage rooms
• Greenhouses
• Telecommunication devices
• Servers
• A/C units

PoE (power over Ethernet) temperature, relative air humidity, atmospheric pressure meters T0610, T3610, T7610. Only to be used with internal sensors.

Application:

• Storage rooms
• Greenhouses
• Telecommunication devices
• Servers
• A/C units

• Designed to measure the moisture of wood, sawdust, shavings, chips, straws and hay
• Moisture measurement method: resistive
• Sawdust moisture range: 8...30 %
• Hay moisture range: 8...25 %
• Sample size: 120 cm³
• Sample compression pressure: 0,2 MPa