Контроллеры, регуляторы

• Electrochemical gas sensor
• Range: 0...20 / 0...100 ppm C₂H₄O
• Resolution: 0,1 / 1 / 5 ppm C₂H₄O
• Analog output: 2 x 4...20 mA / 0a...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -20...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Suitable for ATEX Zones 2 and 22
• Electrochemical gas sensor
• Range: 0...100, 0...300, 0...1000, 0...5000 ppm NH3
• Resolution: 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -40...+50 °C
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Stable long-life pellistor (catalytic bead) sensor
• Range: 0...15% vol. (0…100% LEL)
• Resolution: 0.1% vol. or 1% LEL
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -10...+50 °C
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Stable long-life photoacoustic or optical NDIR sensor
• Range: 0...10 000 ppm / 0...40 000 ppm / 0...5 % vol (0...100 % on request)
• Resolution: 1 ppm / 10 ppm / 0.01 % vol. CO2
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -40...+60 °C; 0….100 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Stable long-life electrochemical sensor
• Range: 0...300 or 0...1000 ppm
• Resolution: 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -20...+50 °C; 0….90 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Detected gases: hydrogen, methane, acetylene, propane, butane
• Default calibration: methane CH4
• Stable long-life metal-oxide / pellistor sensor
• Range: 0...100% LEL
• Resolution: 0,1 / 1 % LEL
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -40...+70 °C; ≤ 95 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Stable long-life electrochemical sensor
• Range: 0...10 / 0...200 / 0...1500 ppm
• Resolution: 0,1 / 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -40...+50 °C; up to 100 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Detectable gases: R-12, R-123, R-125, R-134a, R-143, R-22, R-404a, R-407c, R-410a, R-507, R-514a, R-1234ze and similar
• Stable long-life metal-oxide sensor
• Range: 0…1000 / 0…2500 ppm
• Resolution: 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -30...+60 °C; < 95 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Stable long-life electrochemical sensor
• Range: 0...100 ppm, 0...2000 ppm H2S
• Resolution: 1 ppm H2S
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -40...+50 °C; 15…90 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Stable long-life metal-oxide / pellistor sensor
• Range: 0...100% LEL CH4
• Resolution: 0,1 / 1 % LEL CH4
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -40...+70 °C; ≤ 95 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Stable long-life electrochemical sensor
• Range: 0…250 ppm
• Resolution: 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -30...+50 °C; 15…90 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Stable long-life optical NDIR sensor
• Range: 0…1000 ppm
• Resolution: 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -20...+50 °C; 0…95 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Stable long-life electrochemical sensor
• Range: 0...25 % vol O2
• Resolution: 0,01 % vol O2
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -40...+60 °C; 5…95 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Highly sensitive Photo Ionization Detector (PID) sensor
• Detectable gases: VOCs (acetone, ethanol, toluene, xylene etc.)
• Default calibration: Isobutylene
• Range: 0…40 / 0…200 ppm isobutylene
• Resolution: 0,01 / 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -40...+65 °C; 0…95 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Stable long-life metal-oxide sensor
• Detectable gases: acetone, ethanol, toluene, xylene etc.
• Default calibration: toluene
• Range: 0...1000 ppm (toxic range) / 0...100% LEL (flammable range)
• Resolution: 1 ppm for toxic ranges / 0,1 % LEL for flammable range
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -40...+70 °C; < 95 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

Thermal mass flow sensor for compressed air and gases VA 500

• 4...20 mA, pulse and a Modbus RTU (RS 485) interface as standard
• Optional: Interfaces such as Modbus TCP (Ethernet), PoE, M-Bus
• Optional: Bi-directional measurement
• Pressure tight up to 50 bar
• Temperature range up to 110 °C
• Protection class IP65
• Suitable for gas velocities up to 224 Nm/s
• Integrated display for showing the measured values
• Can be used from 1/2" up to 40", larger diameters on request
• Easy installation under pressure
• Settings can be changed via the display
• Main counter reading can be reset via the display

• Calorimetric measuring principle
• Units freely selectable via keys at the display
• Display shows 2 values at the same time, twistable by 180 ° degree
• Integrated Modbus interface enables connection control systems, SCADA
• M-Bus (optional)
• Analog output 4...20 mA
• Pulse output (galvanic isolation)
• High measuring accuracy (ideal for leakage measurement)

• Gas measuring, monitoring and warning controller (Multi-Sensor-Controller MSC) for reliable detection of combustible, toxic and refrigerant gases
• Flexible control: 3 relays (SPDT, potential-free, 250 V)
• Intelligent Communication: RS-485 interface with DGC and Modbus protocol
• Precise signal transmission: 4–20 mA input and output for seamless system integration, up to 3 sensors including remote

• GA-1 is designed for grease detection in separators, basins and tanks
• Easy to install, does not need calibration
• Switch output
• Remote monitoring capability
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

• GA-2 is designed for grease detection in separators, basins and tanks
• Two sensors – one is for grease detection, other – for blockage control
• Easy to install, does not need calibration
• 2 switch outputs
• Remote monitoring capability
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

• Digital inputs: 2
• 1-Wire input (up to 8 sensors)
• RS-485 input (up to 8 sensors)
• Analog inputs: 4 (2 x 0...10 VDC, 2 x 0...10 VDC / 4...20 mA, WEB control)
• Relay outputs: 4 (NO/NC)
• Setup via USB or SMS
• Data logger for up to 52 000 records
• Webserver
• Periodical upload of data logger file to a remote HTTP server
• HTTP Post, HTTP API
• SMS alarms (up to 5 numbers)
• E-mail alarms (up to 5 recipients), SMT with TLS support
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...24 VDC

• Digital inputs: 2
• 1-Wire input (up to 4 sensors)
• Analog inputs: 2 (0...60 VDC)
• Relay outputs: 2 (NO/NC)
• Setup via USB or SMS
• Webserver
• HTTP Post, HTTP API
• SMS alarms (up to 5 numbers)
• E-mail alarms (up to 5 recipients), SMTP with TLS support
• Operating temperature: 0...40 °C
• Warranty: 3 years
• Supply: 10...28 VDC

• Used with grain temperature sensor cables GWSL 1100, GWSL 2100 and spear sensors GWTL-R
• Cable length up to 200 m (including the temperature cables)
• Up to 32 values of temperatures are shown in cycle
• Weight: 240 g (with batteries)
• Case material: ABS
• Supply: 2 x AA (battery life circa 1 year)
• Operating temperature: -20...+40 °C

• Communicates with devices supporting HART and LHP interfaces
• Supports universal, common commands
• HART connector: BNC
• Supply: 9 V accumulator (charged via USB)
• Operating temperature: -20...+50 °C
• Operating humidity: 0...80 % RH
• Protection class: IP40

• High level detection
• Oil on water surface detection
• Designed for usage in separators, basins and tanks
• Easy to install, does not need calibration
• Reliable long-term se in harshest conditions
• Acoustic and visual alarms
• 2 switch outputs
• ATEX certified
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

• Long-life metal-oxide gas sensor
• Range 0...100 % LEL H₂
• Resolution 0,1 % LEL H₂
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor options

• Stable long-life electrochemical gas sensor
• Range 0...100 / 0...1000 ppm H₂S
• Resolution 0,1 / 1 ppm H₂S
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 10 / 20 ppm H₂S

• Stable long-life electrochemical gas sensor
• Range 0...100 / 0...1000 ppm H₂S
• Resolution 0,1 / 1 ppm H₂S
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor option

• Electrochemical gas sensor
• Range: 0...100 / 0...2000 ppm H₂S
• Resolution: 0,1 / 1 ppm H₂S
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Input: 0...20 mA, 4...20 mA, 0...1 V, 0...10 V
• Display: 4 digits (value range: -1999...4000)
• Measurement unit can be displayed
• Option: 2 x relay output for control and alarm
• Option: sensor supply output
• Option: RS-485 Modbus RTU interface
• Manual calibration
• Stores maximum and minimum measurement values
• Operating temperature: 0...50 °C
• Supply: 230/110 VAC / 12/24 VAC / 9...30 VDC / 7...24 VAC

Industrial IoT module TCW242 for remote real-time monitoring and control of industrial equipment, facilities, production lines, renewable energy systems, greenhouses and water stations

• Web-based configuration and control with password protection
• 4 digital inputs for dry contacts
• 4 analog inputs with 0-10V and 0-20mA options
• 4 relays with normally open/normally closed contacts
• RS-485 interface for MODBUS RTU sensors. Up to 24 sensors (registers)
• Monitor up to 24 channels
• Set up to 24 independent alarms
• SNMPv3 protocol support
• Alarm notifications via SNMP traps
• NTP protocol support
• HTTP API commands
• 4 schedules for real-time control of relay outputs
• Custom logical functions
• Secured email transfer with TLS 1.0, TLS 1.1, and TLS 1.2 support
• Data logging capacity for up to 70,000 records
• Dynamic DNS support for DynDNS, No-IP, and DNS-O-Matic providers
• Periodical HTTP / HTTPS Post of XML / JSON status files for client-server systems
• MODBUS TCP / IP protocol support
• MQTT 3.1.1 protocol support
• Rugged DIN-Rail / wall-mountable enclosure
• Operating temperature range: -20…+55 °C

• Ethernet connection
• Digital inputs: 2
• 1-Wire input (up to 2 sensors)
• Analog inputs: 2 (0...60 VDC)
• Relay outputs: 2 (NO/NC)
• IP watchdog function
• Webserver
• SNMP alarms
• VLAN and MAC address filtering
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...14 VDC

• Adjustable start time delay: 0...16 s
• Operating resistance: 0...100 kΩ
• Mounting on DIN rail
• Operating temperature: -10...50 °C
• Supply: 117/230/400 VAC
• Protection class: IP20

• Three versions by sensitivity: NS (standard), AS (high), SR (adjustable)
• Operating resistance: 5,6 kΩ (NS) 70 kΩ (AS) 0...100 kΩ (SR)
• Mounting on DIN rail
• Operating temperature: -10...50 °C
• Supply: 117/230/400 VAC
• Protection class: IP20

• Input: standard 4...20 mA signal or capacitive Labkotec 3W probe
• Current output: 0/4...20 mA
• Switch outputs: 2 units
• LCD display
• Programmable using buttons
• ATEX certified
• Wall-mounted, IP65
• Supply: 230 VAC, 50/60 Hz

• High level detection
• Oil on water surface detection
• Sludge under water detection
• Designed for usage in separators, basins and tanks
• Version with GSM module available – for alarms and service reminders
• Acoustic and visual alarms
• 2 switch outputs
• ATEX certified
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL (0...5 % vol) CH₄
• Resolution 0,1 % LEL (50 ppm) CH₄
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 20 / 50 % LEL CH₄

• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL CH₄
• Resolution 0,1 % LEL CH₄
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 20 / 50 % LEL CH₄
• Visual and acoustic alarms

• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL (0...5 % vol) CH₄
• Resolution 0,1 % LEL (50 ppm) CH₄
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor options

• Metal-oxide gas sensor
• Range: 0...100% LEL (0...5 %) CH₄
• Resolution: 0,1 % LEL (50 ppm) CH₄
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+70 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Input: Modbus RTU – RS-485
• Output: 4-channel SPST relay contacts
• Rated relay load: 3 A at 250 Vac; 3 A at 30 Vdc
• Non-volatile memory to retain and restore relay states following power outages
• Watchdog functionality for communication loss
• Operating temperature / humidity: -20…+60 °C / 10…90 % (non-condensing)
• DIN rail mounting
• Power supply: 5…28 Vdc
• Warranty: 3 years

Multifunction astronomical digital clocks RDT-TPA2 are applied for switching on and off the lightning or other electrical receivers in accordance to sunset and sunrise.

• 80 programs (astronomical and annual), holiday mode, random mode
• Automatic summer/winter digital clockover
• Automatic transfer of weekdays
• Sealable cover of the front panel, easy setting by 4 buttons
• Backlighted LCD display (can be turned off)
• 10-year power reserve (internal lithium battery which can protect real time clock and all the settings when the electric power supply is off)
• Number and type of contacts: 2 CO (each channel can be assigned an individual program)
• Rated load: 16 A / 250 V AC
• Direct mounting on 35 mm rail mount acc. to EN 60715
• Compliance with standards EN 60730-1, EN 60730-2-7, Directive RoHS

SIRO is an indoor air quality transmitter with a modern design. The transmitter is available with several optional air quality sensors. The modular device can be equipped with CO2 concentration and VOC (Volatile Organic Compounds) measurements or alternatively PM (Particulate Matter) measurement, and in addition, temperature and humidity measurements. SIRO-MOD series models use Modbus serial communication protocol.

• Measuring elements:
  • CO2: Non-dispersive infrared (NDIR); 0...2000 ppm
  • VOC: Complementary Metal Oxide Semiconductor (CMOS); range: * - see datasheet
  • PM: Laser-based light scattering particle sensing
  • Temperature: Integrated to CMOS
  • Relative humidity: Thermoset polymer capacitive sensing element
• Field configurable outputs for selected measurements; Configuration possible through MODBUS
• Proportional output options including voltage (0–10 V, 0–5 V, 2–10 V) and optional current (4–20 mA); MODBUS
• Offset feature enabling field calibration for each measurement parameter (CO2, VOC, PM, RH, T)
• Optional LCD-display and buttons
• Operating temperature: 0…50 °C
• Protection standard: IP20

• 10 time functions. With control signal and without additional signal
• 10 time ranges. Ranging from 0,1 sec. to 30 hours
• Operating voltage: 12…240 V AC / DC
• Operating power: < 4 VA
• Mounting on DIN rail
• Operating temperature: -20…+55 °C

• Electrochemical gas sensor
• Range: 0...250 ppm NO
• Resolution: 1 ppm NO
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -30...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Stable long-life electrochemical gas sensor
• Range 0...20 / 0...200 ppm NO₂
• Resolution 0,02 / 0,1 ppm NO₂
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 3 / 6 ppm NO₂

• Stable long-life electrochemical gas sensor
• Range 0...20 / 0...200 ppm NO₂
• Resolution 0,02 / 0,1 ppm NO₂
• Outputs 2 x 4...20 mA / 0...10 V, RS-485

• Electrochemical gas sensor
• Range:
• -- 0...20 ppm NO₂
• -- 0...200 ppm NO₂
• Resolution:
• -- 0,1 ppm NO₂ for 20 ppm range
• -- 1 ppm NO₂ for 200 ppm range
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -20...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• OilSET-1000 is designed for oil detection in separators, basins and tanks
• Easy to install, does not need calibration
• 2 switch outputs
• Ultrasonic sensor SET/S, 5 meter cable
• ATEX certified
• Wall-mounted, IP67
• Supply: 230 VAC, 50/60 Hz