Преобразователи

• Sensor type: RTD (Pt100, Pt1000), TC (K, J)
• Output: RTD (Pt100, Pt1000), TC (K, J), 4...20 mA, 4...20 mA +HART, 0...10 V, RS-485, IO-LINK
• Measuring range: -30 °C ... 250 °C, 550 °C
• Accuracy: Class A or B /cl.2
• Sensor tube:
  • Material: Stainless steel AISI304 (1.4301)
  • Diameter: Ø6/8/10mm
  • Length: 100, 200, 500, 700, 1000mm or on request
• Connection head type: B
• Protection class: IP65
• Electrical connection: 2-wire, 3-wire or on request
• Process connection: G¼”; M20x1,5; G½” or on request
• Various sizes are available depending on customer requirements and drawings

• Связь сети RS-485 с компьютером через USB порт.
• Максимальная скорость связи 1 Mb /s (зависит от длины линии RS-485).
• Гальваническое разделение портов входа и выхода.

• Преобразователь типа P20H предназначен для преобразования сигнала высокого напряжения или тока с однополярных или двуролярных в стандартные сигналы постоянного тока и напряжения или в цыфровой формат МODBUS.
• Вход гальванически отделен от выхода и источника питания.
• Программирование прибора выполняется с помощью программатора PD14 и бесплатной программой LPConfig, с помощью которой можно конфигурировать, контролировать сигналы, изменять настройки преобразователя.

Пассивный сепаратор сигналов, стандартного 0/4…20мA тока, питаемый от токовой петли.

• Устройство предназначено для преобразования сопротивления, стандартного напряжения и тока термодатчика на сигналы постоянного напряжения и тока
• Ввод гальванически изолирован от выхода и питания
• С помощью программатором PD14 можно запрограммировать тип выхода, период усреднения, настроить индивидуальную характеристику выхода и измеряемый сигнал

• Прибор предназначен для преобразования и галванического разделения стандартных сигналов постоянного тока и напряжения и установления индивидуальной характерисики выходного сигнала.
• Вход гальванически изолирован от выхода и источника питания.
• Программирование прибора выполняется с помощью программатора PD14 и бесплатной программой LPConfig.

TSV202-60 ideal for monitoring battery banks, solar panels, industrial control circuits, and other high-voltage applications.

• Dual channel input: 0…60 V
• Communication interface: 1-Wire protocol
• Accuracy: ±1%
• Resolution: 0.001V
• Galvanic isolation between the voltage circuit and 1-Wire bus
• Operating environment: -20…+60 °C / 10…90 %RH
• Warranty: 3 years

• 1-Wire protocol ambient light sensor
• Light measurement range: 0...83000 lux
• Excellent long-term stability
• Warranty: 3 years
• Connection: RJ-11

• Dual channel input: 0…24 mA or 0…10 V
• Communication interface: 1-Wire protocol
• Accuracy: ±1 %
• Resolution: 0.001mA / 0.001 V
• Galvanic isolation between the current circuit and 1-Wire bus
• Detection of special states such as sensor errors or calibration values
• Operating environment: -20…+60 °C / 10…90 %RH
• Warranty: 3 years

• 1-Wire protocol ambient pressure sensor TSP200
• Pressure measurement range: 300...1100 hPa
• Excellent long-term stability
• Warranty: 3 years
• Connection: RJ-11

• 1-Wire protocol current transmitter
• Current measurement range: 0,3...15 A (AC / DC, set by jumper)
• Resolution: 10 bits
• Galvanic isolation between the current circuit and 1-Wire bus
• Excellent long-term stability
• Warranty: 3 years
• Connection: RJ-11

TSC201 is a compact current sensor with a 1-Wire interface and an input range up to 10 A, designed for AC and DC current monitoring. Its range allows direct measurement of low currents or connection to current transformers (CTs) with 10 A secondary output for accurate indirect monitoring of higher currents.

• 1-Wire protocol current transmitter
• Current measurement range: 0,1...10 A (AC / DC)
• Measuring accuracy: ± 1 %
• Resolution: 0,01 A
• Galvanic isolation between the current circuit and 1-Wire bus
• Power supply: 4,0…5,5 V
• Excellent long-term stability
• Warranty: 3 years

• Input: Pt100 (2-, 3-, 4-wire)
• Measurement range: -200...+850 °C
• Resolution: 24 bits
• Very low current consumption
• No external power supply needed
• Warranty: 3 years
• Connection: RJ-11

• Input: 2x thermocouples - J, K, T, N, E, B, R, and S
• Output: Modbus RTU – RS-485
• Resolution: 24 bits with DSP processing
• Working isolation voltage: 1500 Vrms
• Operating temperature / humidity: -20…+60 °C / 10…90% (non-condensing)
• DIN rail mounting
• Power supply: 5…30 Vdc
• Warranty: 3 years

• Digital inputs: 2
• 1-Wire input (up to 8 sensors)
• RS-485 input (up to 8 sensors)
• Analog inputs: 4 (2 x 0...10 VDC, 2 x 0...10 VDC / 4...20 mA, WEB control)
• Relay outputs: 4 (NO/NC)
• Setup via USB or SMS
• Data logger for up to 52 000 records
• Webserver
• Periodical upload of data logger file to a remote HTTP server
• HTTP Post, HTTP API
• Communication: 4G-LTE, 3G-WCDMA
• SMS alarms (up to 5 numbers)
• E-mail alarms (up to 5 recipients), SMT with TLS support
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...28 VDC

• 4G LTE supported frequency bands:
  • B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/ B66/B34/B38/B39/B40/B41
• 3G supported frequency bands:
  • B1/B2/B4/B5/B6/B8/B19
• 2G supported frequency bands:
  • B2/B3/B5/B8
• M2M communication protocols: MQTT, HTTP API (XML or JSON)
• Setup via WEB interface through the USB or remote setup with HTTP API or SMS commands
• Digital inputs: 2 “dry contacts”
• 1-Wire input (up to 4 sensors)
• Analog inputs: 2 (0...60 VDC)
• Relay outputs: 2 (NO/NC)
• E-mail alarms (up to 5 recipients), SMTP with TLS support
• SMS alarms (up to 5 recipients)
• GSM Geolocation (optional)
• Firmware update over the air (FOTA)
• Operating temperature: -20...+55 °C
• Supply: 10…28 VDC

TCG210-4 is a battery-powered 4G parcel temperature and humidity logger with fallback support for 2G communication. The device is compatible with HTTP/HTTPS API protocols, making it suitable for modern IoT applications. It periodically sends HTTP/HTTPS POST requests to a remote server, containing a status file in JSON format and the most recent logged data in CSV format.

• Global connectivity - Quad-band 4G LTE Cat.1 with 2G fallback ensures reliable operation worldwide.
• Battery-powered autonomy - Operates for months without external power, ideal for parcel monitoring and remote applications.
• Intelligent power management - Advanced sleep mode significantly extends battery life.
• Flexible configuration - Easy setup via Wi-Fi, SMS, or HTTP API.
• Real-time alerts - Instant SMS alarm notifications to up to five phone numbers.
• Integrated sensing - High-accuracy temperature and humidity sensor for critical parcel monitoring.
• Large data storage - Onboard memory for up to 70,000 logged records.
• Seamless IoT integration - Periodic HTTP/HTTPS POST with current status in JSON format.
• Data export - Automatic upload of logged data in CSV format to a remote server.
• Remote management - Full device control through HTTP API commands.
• Future-proof - Firmware update over Wi-Fi or 4G LTE keeps the device always up to date.
• Compact and lightweight - Designed for easy deployment in parcel logistics, cold chain transport, and warehousing.
• Safe for air transport - Powered by a compliant Li-SOCl₂ battery (IATA DGR, UN 3091, PI970 Section II), suitable for air shipment.

• Input voltage range: 0…264 Vac or 0…370 Vdc
• Input frequency: 0…60 Hz
• Input resistance: >2.4 MOhm
• Output: Modbus RTU – RS-485
• Resolution: 24 bits with DSP processing
• True RMS measurement
• Working isolation voltage: 1500 Vrms
• Operating temperature / humidity: -20…+60 °C / 10…90% (non-condensing)
• DIN rail mounting
• Power supply: 5…28 Vdc
• Warranty: 3 years

• Voltage being detected in one of two ranges: 85...250 VAC or 170...250 VAC (settable by jumper)
• Galvanic isolation between the input voltage and output (OC)
• Low temperature drift
• Supplied by detected voltage
• Warranty: 3 years

The SV600 Fixed Acoustic Imager enables users to continuously detect, locate and visualize unheard and unseen air and gas leaks or changes in sound signatures before they become costly problems.

• 64 MEMS digital microphones for image of leaks
• Powerful processor for onboard real time processing: Sound classification, Frequency filtering, dB values and sound intensity mapping, Event triggering
• Measuring distance: 3…15 m
• Integrated visual light camera
• The SV600 can be mounted on moving applications – including as a Boston Dynamics Spot
• Can be mounted close to any equipment or asset, to any area of the production line, or where human access is restricted or dangerous
• Option for IO support through fieldbus coupler
• Integration: HTTP REST API, Modbus
• Operating temperature: -20…+50 °C
• Protection class: IP54
• Communication and power supply: Ethernet RJ45, POE IEEE 802.3at

• Air velocity measurement range: 0...2 / 0...10 / 0...20 m/s (selectable via jumper)
• Temperature measurement range: 0...50 °C
• Output: 0...10 V / 4...20 mA
• Option: LCD screen
• Option: relay output
• Supply: 24 VDC/VAC
• Operating temperature: 0...+50°C
• Protection class: IP54

• Maximal pressure measurement range: 0...1000/2000/5000/7000 Pa
• Air flow and velocity measurement
• Output: 0...10 V / 2...10 V or 4...20 mA
• Option: autozero function and LCD screen
• Allowed overpressure: 25 kPa
• Supply: 10...35 VDC
• Operating temperature: -40...+50°C (see datasheet)
• Protection class: IP54

• Temperature measurement range: -30...+80 °C
• Humidity measurement range: 0...100 %
• Output: RS-485 Modbus RTU
• Calculates absolute humidity and dew-point temperature
• Cable length: 2 m / 2 m with M8 connector / 5 m / 10 m
• Operating temperature: -20...+60 °C
• Supply: 9...28 VAC/VDC

• Analog gas detector MC for connection to DGC, MSC, WSB or any compatible gas detector
• Reliable self-monitoring: Integrated watchdog
• Precise signal: 4–20 mA (2–10 V) output for easy system integration

Moisture measuring of sand, minerals, clay, grain, foodstuffs, sawdust, ores, sewage sludge. During operation, the sensor requires nothing but a power supply and a display or a controller that can receive the measurement signal. The BMMS sensor is designed for applications in which no multi-part systems are to be used but still the highest precision is required. Due to the in-process calibration, all potential interference from the sensor installation is directly compensated for.

Carbon dioxide (CO2) and temperature transmitter with a display CDT2000 Duct. The device is designed for measurement of air parameters in ventilation channels.

• CO₂ range 400...2000 ppm
• Temperature range 0...50 °C

Carbon dioxide (CO₂), temperature and humidity transmitter with a display CDT2000.

• Carbon dioxide (CO₂) range: 400...2000 ppm
• Humidity range: 0...100 % 
• Temperature range: 0...50 °C

• Stable long-life optical NDIR gas sensor
  Range 0...10 000/50 000 ppm CO2
  Resolution 1/100 ppm for 10K/50K range CO2​
  Outputs 2 relays, 2 x 4...20 mA / 0...10 V, RS-485
  Remote probe option

• Stable long-life optical NDIR gas sensor
• Range 400...5 000/10 000/50 000 ppm CO₂
• Resolution 10 ppm CO₂
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Remote probe option

• NDIR gas sensor
• Range: 0...10 000 ppm CO2
• Resolution: 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: 0...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC as options

Carbon dioxide transmitter CMT is designed for CO concentration measurement. The transmitter is used to control interior ventilation systems.

• CO range 0...300 ppm

• Stable long-life electrochemical gas sensor
• Range 0....1000 ppm CO
• Resolution 1 ppm CO
• Default alarms at 25 ppm / 35 ppm CO
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485

• Stable long-life electrochemical gas sensor
• Range: standard 0....200 ppm CO, maximal 0...1000 ppm CO
• Resolution 1 ppm CO
• Default alarms at 25 ppm / 125 ppm CO
• Outputs 2 x relays with switch-over contacts
• Visual and acoustic alarms

• Long-life electrochemical cell
• Range 0....1000 ppm CO
• Resolution 1 ppm CO
• Outputs 4...20 mA / 0...10 V, RS-485

• Stable long-life electrochemical gas sensor
• Range 0....200 ppm CO
• Resolution 1 ppm CO
• Outputs 2 x relays with switch-over contacts
• UART digital interface
• Visual and acoustic alarms
• Magnetic key switching

• Electrochemical gas sensor
• Range:
• -- 0…300 ppm CO
• -- 0...1000 ppm CO
• Resolution: 1 ppm CO
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -20...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Addressable digital gas detection system (Sensor-Board SB) for combustible, toxic and refrigerant gases.
• Communication: RS-485 interface for stable and secure system networking
• Precise Detection: High accuracy thanks to digital signal processing
• Easy maintenance with X-Change: Plug & Play systems for fast, convenient service
• Robust Design: Reliable with IP65 even under extreme conditions

• Stable long-life electrochemical cell
• Range 0...20 ppm Cl₂
• Resolution 0,02 ppm Cl₂
• Outputs 2 relays, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 0,5 ppm/1 ppm Cl₂
• Remote probe option

• Stable long-life electrochemical cell
• Range 0...20 ppm Cl₂
• Resolution 0,02 ppm Cl₂
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Remote probe option

• Electrochemical gas sensor
• Range: 0...10 ppm Cl₂
• Resolution: 0,1 ppm Cl₂
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -20...+50 °C
• Supply: 11...30 VDC (default), 24 VAC or 90...265 VAC

• For methane, butane, propane and hydrogen
• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL
• Resolution 0,1 % LEL
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarms at 20 / 50 % LEL

• For methane, LPG, hydrogen and acetylene
• Can be calibrated for metane, propane and butane
• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL
• Resolution 0,1 % LEL
• Outputs 2 x relays with switch-over contacts
• Default alarms at 10 / 25 % LEL

• For methane, butane, propane and hydrogen
• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL
• Resolution 0,1 % LEL
• Outputs 2 x 4...20 mA / 0...10 V, RS-485

• For methane, LPG, hydrogen and acetylene
• Can be calibrated for methane, butane, propane, acetylene and hydrogen
• Stable long-life metal-oxide gas sensor
• Range: 0...100 % LEL
• Resolution: 0,1 % LEL
• Outputs 2 x relays with switch-over contacts
• Default alarms set-points 10 / 25 % LEL
• UART digital interface
• Alarms: blinking LED, 85 dB buzzer

• Metal-oxide gas sensor
• Detected gases: hydrogen, methane, acetylene, propane, butane
• Standard calibration: methane
• Range: 0...100 % LEL
• Resolution: 0,1 % LEL
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+70 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

Temperature transducers P4141, P4121, P4151, P4131, P4161, P4171, P4191 with 4...20 mA output and Pt1000 input.

P4121 – P4171 class transducers are designed to convert RTD Pt1000 (3850ppm/°C) signal to current. These transducers have 4...20 mA output. RTD sensor Pt1000 is not included.

• Warning- and Sensor-Board WSB for digital and analog sensor technology for the precise detection of combustible, toxic and refrigerant gases.
• Versatile alarm function: Alarm and fault relays (30 V)
• Intelligent interfaces: RS-485 interface with DGC or Modbus protocol
• Precise signal transmission: 4–20 mA input and output for reliable communication
• Flexible: Connection of up to 3 sensors (2 digital)

Compact sensor VA 525 for measuring compressed air or nitrogen inline.

• 4...20 mA and pulse or a Modbus RTU (RS 485) interface as standard
• Optional interfaces such as Modbus TCP (Ethernet), PoE, M-Bus available
• Pressure range up to 16 bar
• Temperature range up to 60°C
• For speeds up to 224 Nm/s
• Integrated display to show the measured values
• Available from 1/4" to 2''
• Settings adjustable via the keys of the display
• Main counter can be reset via the display
•  

• Input: potentiometer / 0...10 V / 4...20 mA / 3,33 mV/V / 2 mV/V / 2.5 mV/V / CANopen
• Analog output: none / 0...10 V / 0...5 V / 0,5...4,5 V / 0...20 mA / 4...20 mA
• Relay output: 2 units
• Communication interface: none / RS-232 / RS-485 / USB / CANopen
• Invertible analogue output (10...0 V, 20...0 mA)
• Fast and easy parameter configuration via USB
• Optional tare function (scaling to zero)
• Supply: 220 VAC / 24 VAC/DC
• Operating temperature: 0...50 °C
• Protection class: IP60 (front)

• Input: potentiometer / 0...10 V / 4...20 mA / 3,33 mV/V / 2 mV/V / 2.5 mV/V / CANopen
• Temperature input: none / Pt100 / Pt1000 / thermocouple
• Analog output: none / 0...10 V / 0...5 V / 0,5...4,5 V / 0...20 mA / 4...20 mA
• Relay output: 3 units
• Communication interface: none / RS-232 / RS-485 / USB / CANopen
• Invertible analogue output (10...0 V, 20...0 mA)
• Fast and easy parameter configuration via USB
• Optional tare function (scaling to zero)
• Supply: 220 VAC / 24 VAC/DC
• Operating temperature: 0...50 °C
• Protection class: IP60 (front)