Беспроводные датчики

• Sensor O-EXT measures temperature with external probes in outdoor (IP66-casing)
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: custom ordered C, T, or S (standard T-mode)
• Measurement range: -40…+125 °C
  • Accuracy: ± 0,5 °C
• Up to 4 external 1-wire probes can be connected
• Transmission interval: custom ordered 300 s…1 h (standard 5 min)
• AES-128 encryption mode 5, profile A (key unique to each device)
• Power supply: battery 3.6 V Li-SOCI2
  • Continuous battery level monitoring
    • Battery lifetime up to 16 years at 25 °C with standard configuration
• Operating temperature: -40…85 °C

• Sensor G2-EXT measures temperature with external probes
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: C, T, or S (configuration on order)
  • AES-128 encryption mode 5, profile A (configuration on order ON / OFF)
  • Standard: T1-Mode, 5 min.Encryption ON
• Measurement range: -55…+125 °C
  • Accuracy: ± 0,5 °C
• Up to 4 external 1-wire DS18B20+ probes can be connected
• Warnings about low battery, case opened or removed from wall (opt.) or sensor not working
• Transmission interval: configurable 60 s…1 hour
• Operating temperature: -30…85 °C (recommended: +5…+50 °C) (non condensing)
• Power supply: ER14505 battery 3.6 V Li-SOCI2
  • Battery lifetime up to 14 years, depends on configuration and operating temperature

• Sensor E2-VOC measures VOC (Volatile organic compounds), ambient temperature and humidity, transmits instant values, average hourly values, and average 24-hour values
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: T (C or S can be custom ordered)
  • AES-128 encryption mode 5, profile A
• Measurement range
  • Temperature: -40…+85 °C
  • Humidity: 0…100 % RH (non condensing)
  • VOC: 0…60000 ppb
• Measurement accuracy
  • Temperature: ± 0,2 °C in the range of +5…+55 °C
  • Humidity: ± 2 % RH in the range of 10…90 %
  • VOC: typical ± (15…25 %) of value at 25 °C / 50 % RH
• Transmission interval: 90 s both sampling and sending. Custom sending interval on request (60 s…1 hr)
• Device has 2 antennas for maximum range in both vertical and horizontal directions
• Power supply: 2 x ER18505 3.6 V Li-SOCI2 battery pack (8200 mAh)
  • Battery lifetime up to 14 years, depends on configuration and operating temperature

• Water leakage detector G2-LD detects leakage with active 1 meter cable
• Up to 2 leakage cables mountable
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: configurable C, T, or S (configurable)
  • AES-128 encryption mode 5, profile A
• Transmission interval: configurable 60 s…1 hour
• Operating temperature: -30…+85 °C (recommended +5…+50 °C) (None condensing)
• Warnings about low battery, case opened or removed from wall (opt.), leakage detected (red LED)
• Power supply: ER14505 3.6 V Li-SOCI2 battery
  • Battery lifetime up to 14 years, depends on configuration and operating temperature

Designed for precisely measuring electricity usage and frequency of use. Pulse counter belonging to the PRO sensor series, includes Aranet Sub-GHz ISM band radio which wirelessly transmits sensor measurements to the Aranet PRO base station.

• Compliance with MID certificate
• Maximum current: 40 A
• Nominal voltage: 230 V, 50 Hz
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Data encryption
• Supply (pulse counter): 1 x AA battery
• Battery lifetime (20 °C): up to 10 years
• Protection class sensor / meter: IP67 / IP40

Sensor SKU: 5905309601369 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Sensor detects change of state (open / close) with reed switch
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -35…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327691 (IP30) – plastic magnetic detector

Sensor SKU: 5906660327707 (IP30) – metal magnetic detector

Sensor SKU: 5905309600768 (IP67) – metal magnetic detector

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Sensor detects change of state (open / close) with reed switch
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection (IP67 on request)

High-precision sensors in a pre-assembled enclosure box, designed to measure pH in irrigation water for horticulture. This device, belonging to the PRO sensor series, includes Aranet Sub-GHz ISM band radio which wirelessly transmits sensor measurements to the Aranet PRO base station.

• pH level measurement range: 0…14
• pH sensor operating temperature: 0…+60 °C
• Wireless data transmission and grid-powered
• Kit contains: 4…20 mA transmitter with 24 VDC PSU, Glass pH probe, pH 4…20 mA module
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min                    
• For more accurate measuring use sensor in combination with Horticulture Drainage sensor
• For proper use see user manual

Sensor SKU: 5905309601659 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Device can be used to detect every single movement (act as a regular motion sensor used in alarm systems) or count the number of detected movements in the set time periods in order to detect the room occupancy
• Detection distance: 12 m
• Field of view: 40° x 105°
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -35…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327950 (IP30)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud** platform or any other third party systems.

• Device can be used to detect every single movement (act as a regular motion sensor used in alarm systems) or count the number of detected movements in the set time periods in order to detect the room occupancy
• Detection distance: 12 m
• Field of view: 40° x 105°
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection

Sensor SKU: 5905309600584 (IP67)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Pressure measurement range: 0…7 bar (0…101 PSI), accuracy: +/- 0,25% FSO (0…20 bar on request)
• Pressure type: Gage
• Probe cable length: 1m
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP67 protection

Sensor SKU: 5905309601383 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• 3 channels pulse counter (more / less channels on request)
• Supported counters: NO (Pull-up 3.6V)
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -35…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327721 (IP30)

Sensor SKU: 5905309600676 (IP67)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud** platform or any other third party systems.

• 3 channels pulse counter (more / less channels on request)
• Supported counters: NO (Pull-up 3.6V)
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Sensor's configuration can be changed remotely from the cloud or with a mobile application over Bluetooth Low Energy
• Operating temperature: -35…+70 °C
• Case IP30 protection (IP67 on request)

Aranet Rain and Precipitation sensor kit is specifically designed for outdoor monitoring of rain and precipitation. This versatile kit finds applications in agriculture for irrigation and soil moisture management, weather stations, water treatment plants, and more.

• The rain gauge is made of ASA (Acrylonitrile Styrene Acrylate) material which is resistant to sunlight (UV), heat and cold
• Protection against birds (spines) and leaves (mesh)
• Measurement accuracy: ± 2%
• Measurements may be given in units of volume such as liters, milliliters, gallons, or expressed in millimeters per square meter
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Supply (impulse counter): 1 x AA battery
• Battery lifetime (20 °C): up to 10 years
• Operating temperature (pulse counter): -40...+60 °C
• The rain gauge operates from +0 °C as it does not have a warming mechanism
• Protection class (pulse counter): IP68
• Included: rain gauge and wireless pulse counter TDSPIC02.010

• 300Mbps wireless data rates
• Tiny
• Supports AP (default), Client, Router, Repeater and Bridge modes
• Powered through a micro USB port by an included external power adapter or USB connection to a computer
• Compatible with Comet System devices which have Ethernet interface

Soil moisture sensor that helps to ensure necessary watering level for optimal plant growth. This device, belonging to the PRO sensor series, includes Aranet Sub-GHz ISM band radio which wirelessly transmits sensor measurements to the Aranet PRO base station.

• Soil moisture measurement range: 0…100 %
• Resolution: 0,1 %
• Accuracy: ± 15 %
• Available cable lengths: 1,5 m / 5 m / 10 m / 20 m
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Data encryption
• Supply: 1 x AA battery
• Battery lifetime (20 °C): up to 10 years
• Operating temperature: -2…45 °C
• Protection class: IP67

Sensor SKU: 5905309601314 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Temperature measurement range: -40…+125 °C, accuracy up to 0,4 °C in the range from -40°C to +90°C and 0,8 °C in the range +90…+125 °C
• Relative humidity measurement range: 0…100 % RH, accuracy up to 3 % in 0…90 % RH and 4 % in the range 90…99 %
• Default probe length 1 m.
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -35…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327653 (IP30)

Sensor SKU: 5905309600324 (IP67)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Temperature measurement range: -40…+125 °C, accuracy: up to 0,4 °C in -40…+90 °C range and up to 0,8 °C in the +90…+125 °C range
• Relative humidity measurement range: 0…99 % RH, accuracy 3 % in 0…90 % RH
• Default probe length 1 m.
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection (IP67 on request)

Sensor SKU: 5905309600102 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Temperature measurement range: -35…+70 °C, accuracy up to 0,4 °C in the range from -10°C to +70°C
• Relative humidity measurement range: 0…99 % RH, accuracy 4 % in 0…80 % RH
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -15…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327622

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Temperature measurement range: -15…+70°C, accuracy: up to 0,4 °C
• Relative humidity measurement range: 0…99 % RH, accuracy 4 % in 0…80 % RH
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection

Sensor SKU: 5905309601307 (IP30)

Sensor SKU: … (IP67)

Wireless BLE temperature sensor with external probe, data logger, BLE measures and send data to the cloud** through Efento gateway or other third-party integration.

You can use a free mobile application to configure the device and read the data from its memory. If you add Efento Gateway, you can build a remote monitoring system.

• Communication: BLE (Bluetooth Low Energy)
• External sensor measurement range: -55…+125 °C
  • Accuracy up to 0.5°C in the range from -10°C to +85°C and up to 2°C in the range -55 to +125°C
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -15…+70 °C / 0…99 %
• Case IP30 protection (IP 67 on request)

Sensor SKU: 5906660327646 (IP30)

Sensor SKU: 5905309600218 (IP67)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Temperature measurement range: -55…+125 °C, accuracy: up to 0,5 °C in -10…+85 °C range and 2 °C in the -55…+125 °C range
• Default probe length 1 m. Different probe length and tip on request
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection (IP67 on request)

Sensor SKU: 5905309600096 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Temperature measurement range: -35…+70 °C, accuracy up to 0,4 °C in the range from -20°C to +70°C and up to 0,5 °C in the range -35 to -20 °C
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -35…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327608

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Temperature (measuring and ambient): -15…+70°C, accuracy: up to 0,4 °C
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• User configurable alarm thresholds. If any of the thresholds is exceeded, sensor will send the data to the platform immediately
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Sensor's configuration can be changed remotely from the cloud or with a mobile application over Bluetooth Low Energy
• Operating temperature: -15…+70 °C
• Case IP30 protection

The sensor SVT200-T require to be used with Broadsens's wireless gateway and analysis software BroadVibra.

• Temperature measurement range: -40…+105 °C
• Accuracy / Resolution: ±0,3 °C / 0,01 °C
• Measurement and transmission interval: 15 seconds (Selectable: 1…60 s)
• Power supply: CR2450W Battery. Up to 10 years in continuous usage
• Wireless data transmission (BLE): 2.4GHz; up to 100 m in line of sight
• Certificates: FCC, IC, CE(EU), TELEC, KCC, NCC, WPC, RCM certified
• Mounting: Glue / epoxy. Screw mounting option available for SVT200-T-F case
• Protection class: IP68 waterproof
• Size / Weight: 39 mm x 14 mm / 30 g

Sensor SKU: 5905309602588 (IP30)

Sensor SKU: 5905309602595 (IP67)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Supported thermocouple types: B, E, J, K, N, R, S, T
  • Accuracy: depends on the connected thermocouple type
  • Resolution: 0.1°C
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh, 3xAA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -15…+70 °C / 0…99 %
• Case IP30 protection (IP 67 on request)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third-party systems.

• Supported thermocouple types: B, E, J, K, N, R, S, T
  • Accuracy: depends on the connected thermocouple type
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 5 seconds to 18 hours (configurable by the user)
• Measurement sending interval: 1 minute to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -15…+70 °C / 0…99 %
• Case IP30 protection

Designed for precisely measuring electricity usage and frequency of use. Pulse counter belonging to the PRO sensor series, includes Aranet Sub-GHz ISM band radio which wirelessly transmits sensor measurements to the Aranet PRO base station.

• Compliance with MID certificate
• Maximum current: 80 A
• Nominal voltage: 3 x 230 / 400 V, 50 / 60 Hz
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Data encryption
• Supply (pulse counter): 1 x AA battery
• Battery lifetime (20 °C): up to 10 years
• Protection class sensor / meter: IP67 / IP40

Wireless, battery powered temperature sensor with 4 probes. Internal OLED screen for reading local measurements.

• Sensor compatible with base stations: PRO, PRO Plus ir PRO Plus LTE
• Probe compatibility: 2-wire Pt1000 (any class)
• Possible temperature measurement range: -200...+600 °C
• Connection plug: M8 A-code connector with locking nut
• Included probe specifications:
  • Temperature measurement range: -30…+180 °C
  • Probe dimensions: ­6×100 mm (V4A stainless steel)
  • Cable insulation material / length: silicone / 5 m
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Data encryption
• Supply: 2xAA alkaline batteries
• Battery lifetime (20 °C): up to 10 years
• Transmitter operating temperature: -40…+60 °C
• Transmitter protection class: IP65
• Packaging includes: 2xAA batteries, 4 pcs temperature probes

The sensor SVT300-V require to be used with Broadsens's wireless gateway and advanced vibration analysis software BroadVibra.

• Alarm sent out in 0,5 second when accident detected
• Acceleration range: 2g to 16g auto adjustment
• Acceleration sampling rate: Low speed & 6.4kHz sampling rate dynamic adjustment based on vibration level
• Acceleration resolution: 16 bit
• -3dB bandwidth (Hz): x,y,z axis: 0.1Hz to 3.2kHz
• Temperature measurement range: -40…+125 °C
• Wireless data transmission (BLE): 2.4GHz; up to 300 m in open space. FCC / IC approved
• Battery life: 3…4 (12-hour running machine a day); 14250 battery, 1200 mAh
• Mounting: M6 screw hole or two screw-hole case
• Working temperature: -55…+85 °C; IP68 (IP69K optional)
• Explosive atmosphere: Intrinsic safe. ATEX & IECEx: Ex ia IIC T4 Ga; Ex ia IIIC T135 Da

Measures analog signal of a 3rd party sensor. Provides 24 or 12 VDC power for a 3rd party sensor using the built-in power supply unit (PSU).

• Sensor compatible with base stations: PRO, PRO Plus ir PRO Plus LTE
• Voltage measurement range: -32...32 VDC
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Operating temperature: -30...+80 °C
• Power supply: 85…265 VAC
  • 1 x AA battery is for to notify user in case of external
• Protection class: IP67

Sensor SKU: 5905309601352 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Sensor detects the presence of conductive liquid (e.g. water) at any point along the entire length of the cable
• Probe maximum working temperature: 70 °C
• Probe length: 3 m (different probe length on request)
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -35…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327684 (IP30)

Sensor SKU: 5905309600348 (IP67)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Sensor detects the presence of conductive liquid (e.g. water) at any point along the entire length of the cable
• Probe maximum working temperature: 70 °C
• Probe length: 3 m (different probe length on request)
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection (IP67 on request)

Sensor SKU: 5905309601345 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Detection of the presence of a conductive fluid (e.g. water) on the level at which the probe is mounted
• Probe length: 3 m
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -35…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327677 (IP30)

Sensor SKU: 5905309600645 (IP67)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Detection of the presence of a conductive fluid (e.g. water) on the level at which the probe is mounted
• Probe length: 3 m
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection (IP67 on request)

• Voltage measurement range: -32...32 VDC
• Operational range (in line-of-sight): up to 3 km
• Cable length: 1 m
• Data transmission: 1, 2, 5, 10 min
• Data encryption
• Supply: 1 x AA battery
• Battery lifetime (20 °C): up to 5 years
• Operating temperature: -40...80 °C
• Protection class: IP68

• Designed for the remote monitoring of measurements in industrial, domestic and environmental maintenance applications
• Typical applications include oil separator alarms, tank surface level measurements, monitoring pumping stations and real estate, and surface and groundwater measurements
• The device sends alarms and measurement results as text messages either directly to GSM phone or to the LabkoNet server
• Settings can be easily modified with a GSM phone
• Analog inputs: 4 units 4...20 mA (passive or active)
• Digital inputs: 4 units
• Relay outputs: 2 units
• Communication: SMS, GPRS
• Operating temperature: -20...+50 °C
• Supply: 230 VAC / 12 VDC battery
• Protection class: IP65

DPC 8380 with display works as a data logger, a transducer with a display and as a pressure switch. Logged data is read using mobile phone via NFC interface. Parameters can be either set via integrated buttons or via NFC. Display and electrical connection are independently rotatable 335°/343°. These properties greatly increase the field of application.

DPS 8381 with display works as a data logger, a transducer with a display and as a pressure switch. Logged data is read using mobile phone via NFC interface. Parameters can be either set via integrated buttons or via NFC. Display and electrical connection are independently rotatable 335°/343°. These properties greatly increase the field of application.

• Range: 0...2,5 iki 0...600 bar / 0...30 iki 0...7500 psi
• Sensor type: Thick film on steel
• Accuracy:  ±0,5 %
• Output (chosen): 4...20 mA / 0...5 VDC / 0...10 VDC / 1...6 VDC
• Switching outputs: 2 x PNP
• Shown measuring units: bar, psi, MPa, kPa, m WC, mm WC
• Ambient temperature: -25...+85 °C
• Media temperature: -25...+85 °C
• Protection class: IP65
• Process connection: G1/4" m, R1/4" m, 1/4"NPT m, 1/2"NPT m
• Data logger memory: 3518 points

• Designed to replace cable data transmission into aerial
• Can be used in telemetric and information systems