Температурные датчики

• Grain temperature monitoring system for steel and concrete bins
• Digital sensors with 2-wire bus
• Sensor spacing: 2 or 3 m
• Diameter: Ø17 mm
• Length: 1...100 m
• Tensile strength: ≤ 8 t
• Operating temperature -20...50 °C
• Maximal surface temperature 85 °C
• System is ATEX-, IECEx- and GOST-R approved
• ATEX approval code: Ex II 1D Ex ia IIIC T85°C

• 4 analog inputs (standard signals, RTD, thermocouple)
• RS-485 Modbus output (Slave mode)
• 2 alarm outputs
• Galvanic isolation of inputs (2 from other 2)
• Programmable individual characteristics, mathematical functions
• Programmable time counters
• Rail-mounted

Преобразователь питаемый от токовой петли P17.

Temperature and standard signal transducer P30U.

• Programmable input
• Mathematical functions
• Individual channel characteristic
• 1 or 2 outputs
• Variant with internal transducer 24 VDC power supply
• RS-485 interface
• Adjustable dimension
• Data logging into internal memory (4 MB) or SD/SDHC card (4 GB)
• Transducer programming with buttons or via PC (“LPConfig” software)

• Temperature transducer TJ-DIN AV, designed to convert temperature measurement signal into 4...20 mA, 0...10 V
• Mounted on 35 mm DIN rail

• Measures air temperature, humidity in ducts
• Calculates dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
• Measurement ranges: -30...125 °C / 0...100 %RH
• Operating temperature: -30...+60 °C
• Ex marking: EX II 3G Ex ic IIC T6 Gc
• Output: 4...20 mA, galvanically isolated
• Adjustable by PC
• Supply: 9...30 VDC
• Calibration certificate included

• Ambient temperature and humidity transducer with 4...20 mA output
• Integrated sensors
• Calibration certificate is included
• Economical

• The module setting can be done through USB or one of the RS-485 (master/slave) interface using the available for free eCon program
• Possibility of connection via internal RS-485 port in order to increase no of analog outputs in network
• Master Modbus function dedicated to read out data from other RS-485 devices and to scale analog value.
• Slave Modbus function to set the signal on analog outputs
• Possibility of configuration through USB without power supply

Analog signal / RS-485 converter SM1.

Analog signal / RS-485 converter SM2.

• Thermometer DT20 for temperature measurement in smokehouses, butcheries, etc.
• Measuring range -50...20 °C, accuracy 0,1 °C
• Sharp-tipped probe ST-03 (4x120 mm) made of stainless, acid-resistant steel (1H18N9T)
• Cable length 3 m
• Operating temperature 0...40 °C
• Supply 230 V
• Size 130x94x81 mm
• Ergonomic ABS casing with indicator, IP65