Измерение и контроль уровня

• Sludge and sand detection
• Oil on water surface detection
• Designed for usage in separators, basins and tanks
• Easy to install, does not need calibration
• Reliable long-term se in harshest conditions
• Acoustic and visual alarms
• 2 switch outputs
• ATEX certified
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

• SandSet-1000 is designed for sludge and sand detection in separators, basins and tanks
• Easy to install, does not need calibration
• Reliable long-term se in harshest conditions
• Acoustic and visual alarms
• 2 switch outputs or output to LabkoNet remote monitoring system
• Ultrasonic sensor SET/S, 5 meter cable
• ATEX certified
• Wall-mounted, IP67
• Supply: 230 VAC, 50/60 Hz

• Separator alarm system for applications where mains supply is not available
• ATEX certified
• Alarms:
  • high level detection
  • oil on water surface detection
  • sludge under water detection
• SolarSet Beacon consists of:
  • housing containing and panel
  • battery
  • charger controller
  • flashing beacon for alarm
  • sludge and oil level sensor system LevelSet S

• Separator alarm system for applications where mains supply is not available
• ATEX certified
• Alarms:

• high level detection

• oil on water surface detection

• sludge under water detection

• SolarSet Beacon consists of:

• housing containing and panel

• battery

• charger controller

• GSM/GPRS modem

• flashing beacon for alarm

• sludge and oil level sensor system LevelSet S

• Separator alarm system for applications where mains supply is not available
• ATEX certified
• Alarms:
  • high level detection
  • oil on water surface detection
  • sludge under water detection
• SolarSet Beacon consists of:
  • housing containing and panel
  • battery
  • charger controller
  • GSM/GPRS modem
  • sludge and oil level sensor system LevelSet S

Hydrostatic level meter HLM–25C is compact measuring device containing ceramic tensometric sensor and evaluation electronics in stainless steel probe. Ceramic sensor is resistant to lightly soiled, or sludge water. From the probe housing comes out 2-wire cable with capillary (for atmospheric pressure compensation). The front side of the sensor is open, therefore the level meter is resistant to capture gross (solid) impurities.

• For continuous level measurement of clean, lightly soiled, or sludge water in non-pressure reservoirs, boreholes, tanks etc.
• The measurement range up to 100 m (H2O)
• The health certificate for contact with potable water available
• Output: 4…20 mA or 0…10 V

Submersible level sensor CLS–23S is developed as reliable and low-cost solution for limit level sensing of water (or water solutions) with miniature outer dimensions without the needs of any adjustment. The connection is done by means of two wires directly to a circuit with relay or to binary input of control system.

• For level detection of water in wells, boreholes or tanks
• Two-wire connection directly to the relay circuit or PLC input (current switch)
• Maximum immersion depth 100 m
• Stainless steel protection basket avoids mechanical damages of electrode
• Supply voltage: 6…30 VDC
• Protection class: IP68

• For continuous non-contact water level measurement in outdoor applications - rivers, canals, sumps, liquid and slurry, pastes and bulk materials
• Remote installation and communication via HART® protocol
• Output: 4…20 mA, HART®
• Variable installation thanks to the possibility of connection via lower or upper thread
• Intelligent numerical signal processing with the elimination of false reflections
• Protection class: IP68
• With the help of a directional funnel it is possible to increase the reception of the reflected echo and to measure problematic media (foaming levels, loose materials, etc.)
• Operating temperature: -30…+60…+70 °C

• Up to 10 / 15 m level measurement with automatic temperature compensation
• Calculation of filling in the tank or flow in open channels
• Galvanically isolated 0/4...20 mA analog output
• Digital RS-485 Modbus RTU interface
• 2 alarm outputs
• Internal data and setup memory
• Two 32-points individual characteristics (for recalculation)
• LCD screen
• Housing protection grade: IP66
• Sensor protection grade: IP66 / IP 68
• Supply: 12...25...40 VDC
• Operating temperature: -20...23...55 °C

• Ultrasonic level sensor ULS-53 is designed for non-contact level sensing of various liquid and bulk-solid materials in closed or open tank, vessels, sumps, reservoirs etc.
• Adjustment are made by two buttons or by magnetic pen
• State indication by two LEDs
• Output:
  • PNP transistor with an open collector (max. switch current 300 mA)
  • Two-state current switch 4…20 mA
• Xi version for usage in explosive areas

• Up to 10 / 15 m level measurement
• Analog output: 4…20 mA
• Digital output: RS-485 Modbus RTU
• Resolution: 3 mm
• Supply: 24 VDC / 300 mA
• Operating temperature: -20...60 °C
• Cable length: 1 m

Sensor SKU: 5905309603240

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Probe cable length: 15 m (0,1…200 m lengths available on request)
• Accuracy: 0,2 % or 0,5 % (FSO)
• Measuring environment: water (well, sea), high temperature liquids (up to 100 °C and corrosive liquids (available upon custom request)
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 5 seconds to 18 hours (configurable by the user)
• Measurement sending interval: 1 minute to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Case IP67 protection / Probe enclosure IP68 protection
• Sensor housing material: Stainless Steel (304 SST)

Level sensor with elimination of rests or foam on the electrode:

• Designed for reliable limit level sensing of wide-range of fluids (electrically conductive or non-conductive), mashed and paste-like materials
• Resistant to adhesion of viscous and sticky media (ketchup, yoghurt, spreads, syrups, creams, pastes, cleaning agents, alkalis, etc.)
• Replacement of vibration level sensors
• Unique function for media recognition “Medium window” (sensor is sensitive only to set medium and does not react to substances with a lower or higher permittivity)
• Direct mounting into tanks, vessels, sumps, pipes or funnels and containers
• Settings by the magic pen (included)

Вы можете использовать его для определения предельного уровня жидкости в непроводящих резервуарах (через непроводящую стенку сосуда или трубопровода).

Датчик оснащен высокочастотной технологией, обеспечивающей надежную работу даже в случае прилипания проводящих сред.

Миниатюрные характеристики в гибком корпусе, возможность установки на слегка изогнутых поверхностях.

Крепится с помощью самоклеящегося слоя или специальных крепежных лент.

Конфигурирование и настройка с помощью «программирующего» кабеля или магнитной ручки.

LED индикация состояния.

Interior protection from flooding sensor CZP-103R, designed for protection of various rooms (workshops, servers, communication modules, etc.) against flooding. The sensor activates when there is water between its electrodes. Can be used in drainages and rainfall wells for protection against basement flooding. LED indication.

• Flood protection
• Alarm and control
• Supply 12...24 VDC
• Isolated ~5 V electrode supply
• Low energy consumption
• Size 19 mm x 66 mm

Fluid level electrode probes SKC-201, designed to control conductive fluid level in open and pressure tanks. Electrodes – rod or flexible (rope with plastic coating). Probe head is made of acid-resistant steel. Maximal electrode count – 3. Insulation is made out of high quality plastic, enabling the probe to be used in food industry. Standard version probes are coated with plastic (FEP, PU, PVDF), lowering the residue collection (slime, carbonate, foam, etc.). Two modifications are available – with connection cable (P) and connector (G).

Capacitive level sensor Reka 2000 is designed to be submerged into liquids, made out of non-toxic polypropylene (PP)

Capacitive oil level sensor PWP-420.60, designed for oil, liquid fuel, food oil and other fluid level control in metal and nonmetal tanks. Special sensor versions are suited for work in aggressive fluid mediums (acids, alkalis).

CLM-36 are designed for continuous level measurement of liquids and bulk-solid materials. Mounted directly in containers, tanks, etc. Indicator LDU-410 can be mounted on head. Can be used in high temperature and explosive atmospheres. Current (4...20 mA) or voltage (0...10 V) output.

• Designed for the remote monitoring of measurements in industrial, domestic and environmental maintenance applications
• Typical applications include oil separator alarms, tank surface level measurements, monitoring pumping stations and real estate, and surface and groundwater measurements
• The device sends alarms and measurement results as text messages either directly to GSM phone or to the LabkoNet server
• Settings can be easily modified with a GSM phone
• Analog inputs: 4 units 4...20 mA (passive or active)
• Digital inputs: 4 units
• Relay outputs: 2 units
• Communication: SMS, GPRS
• Operating temperature: -20...+50 °C
• Supply: 230 VAC / 12 VDC battery
• Protection class: IP65

• Multipoint float level switches AUREGIS LJ-VD for fluid level measurement and control
• Multipoint level switch LJ-VD main difference from LJ-V is that LJ-VD uses up to 3 floats instead of one, that ensures control and measuring in more than one level

• Multipoint float level switches LJ-VDT for fluid level measurement and control
• Multipoint level switch LJ-VDT main difference from LJ-VT is that LJ-VDT uses up to 3 floats instead of one, that ensures control and measuring in more than one level
• Float level switches have an integrated temperature sensor Pt100, Pt1000, Ni100, Ni120, Ni1000, NTC or PTC

• Float level switch AUREGIS LJ-VT with extension and temperature for level and temperature measurement
• Float level switches have an integrated temperature sensor Pt100, Pt1000, Ni100, Ni120, Ni1000, NTC or PTC
• Measured temperature: Pt100, Pt1000, Ni100, Ni120, Ni1000, NTC or PTC 

• Float level switches AUREGIS LJ-V with an extension for level control
• Operating temperature: -30...+130°C
• Protection class: IP65 

• Radar level meter GRLM-70 for continuous level measurement in liquids, mush and bulk-solid materials
• Outputs: 4...20 mA HART or RS-485 Modbus RTU
• Measurement depth: up to 40 m
• Universal usage, direct mounting into containers, silos, vessels, reservoirs, etc.
• LCD or OLED screen
• Linear measurement in non-conductive and in differently shaped containers
• Versions with stainless steel rod or rope electrodes
• Xi, Xit versions for usage in explosive areas
• Xd, XdT versions for usage in flammable dusts areas
• Supply: 18...30/33/36 VDC
• Protection class: IP67

Fluid level alarm Elcluwo 111S, designed for usage with conductometric probes for fluid level alarm and control.

Technical specifications

• One or more level control
• Switch output 2A, 250 VAC
• Probe supply from isolated ~12 V source
• Adjustable sensitivity
• Available modes – flooding, drainage, dry flow, overflooding
• Pump or valve control
• Designed for work with various probes: SKS 401, 201, 101, SW-01 and others
• Mounting on standard rail (35 mm)

Fluid level alarm Elcluwo 112S, designed for usage with conductometric probes for fluid level alarm and control, depth pump protection.

Technical specifications

• One or more level control
• Switch outputs: switching + NO 2 A / 250 VAC
• Probe supply from isolated ~12 V source
• Adjustable sensitivity
• Available modes – flooding, drainage, dry flow, overflooding
• Pump or valve control
• Designed for work with various probes: SKS 401, 201, 101, SW-01 and others
• Mounting on standard rail (35 mm)

• One or more level control
• Switch outputs: switching + 3 x NO 2 A / 250 VAC
• Probes: galvanically isolated, max. 2mA, 5V~ 100 Hz
• Adjustable sensitivity
• Available modes – flooding, drainage, dry flow, overflooding
• Pump or valve control
• Designed for work with various probes: SKS 401, 201, 101, SW-01 and others
• Mounting on standard rail (35 mm)
• Supply: 230 VAC / 24 VAC

• One or two level control
• Switch outputs – switching + 5 x NO, 2A / 250 VAC
• Probes: galvanically isolated, max. 2uA, 5V~ 100 Hz
• Adjustable sensitivity
• Available modes – filling, draining, dry flow, overflow, two/three pump control and others
• Valve or gate control
• Adapted for work with various probes – SKS 401, 201, 101, SW-01 and others
• Mounted on standard rail (35 mm)
• Supply: 230 VAC / 24 VAC

• System consists of alarm device SET-1000 and fixed level vibration sensor SET/V
• For usage separators, basins and tanks
• Alarm device SET-1000 is a single-channel level switch
• When used with SET/V, SET-1000 alarms when set high level in tank is exceeded
• ATEX certified
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

Ultrasonic level meter ULM-53 is designed for continuous liquid (even if polluted), mash and paste materials level measurements in closed and open tanks, sumps, open channels, etc. Adjustments are made with two buttons. State indication by two LEDs. Current (4...20 mA, 20...4 mA) or voltage (0...10 V, 10...0 V) outputs. Xi version is for usage in explosive areas.

ULM-70 is designed for continuous non-contact level measurements. Suitable for usage in various liquids and bulk-solid materials. OLED display. Fast measured values representation on display. Current (4...20 mA) output with HART protocol. Xi version for usage in explosive atmosphere.

Fluid level electrode probes SKC-101, designed to control conductive fluid level in high temperature and high pressure medium. Modifications differ by permissible operating temperature. Recommended to use with Elcluwo 112...114 level alarms.

• Electrode level sensor AUREGIS LJ-B for level measurement
• Process temperature: From -30 to 180°C 

• Electrode level sensor AUREGIS LJ-DSH-2R, LJ-DSH-3R for level measurement
• LJ-DSH-2R - 2 electrode level sensor; LJ-DSH-3R - 3 electrode level sensor
• Process temperature: -20...+80 °C

Electrode level sensor AUREGIS LJ-E3 with 3 electrodes for level measurement. Sensor with other connection thread and electrode length can be made according to request.

Electrode level sensor AUREGIS LJ-E5 with 5 electrodes for level measurement. Sensor with other connection thread and electrode length can be made according to request.

• Universal level regulators (level relays) are designed to be used for water and wastewater level control by turning off the water pump when desired level is reached
• Due to great reliability, sleek shape, heavy mass and filled interior, it is best suited for usage in wastewater
• Double water- and air-resistant sealant increases protection against infiltration even more
• Weight: 1050 g; Buoy volume: 990 cm³; Maximum pressure: < 2 bar

• Universal level regulators (level relays) are designed to be used for water and wastewater level control by turning off the water pump when desired level is reached.
• Weight: 163 g; Buoy volume: 280 cm³: Maximum pressure:< 1 bar

• Universal level regulators (level relays) are designed to be used for water and wastewater level control by turning off the water pump when desired level is reached
• Due to great reliability, sleek shape, heavy mass and filled interior, it is best suited for usage in wastewater
• Double water- and air-resistant sealant increases protection against infiltration even more
• Weight: 250 g; Buoy volume: 430 cm³; Maximum pressure: < 1 bar

• Universal level regulators (level relays) are designed to be used for water and wastewater level control by turning off the water pump when desired level is reached
• Boasts for great reliability and small size
• Weight: 111 g; Buoy volume: 225 cm³; Maximum pressure: < 2 bar / < 5 bar