Поиск

• Portable, small dimension grain moisture meter
• The sample is ground, increasing the measurement accuracy
• Temperature measurement accuracy: ±1 °C
• Moisture measurement accuracy: ±0,5 %
• Automatic temperature compensation
• LCD screen
• Supply: 4xAA (1,5 V), 1xCR2032 (3 V)

• Data converter which connects reader in safe zone with network switches and temperature cables/spears in dangerous zone
• Input: 4 x temperature cables (from switches GWNET11 and cables GWSL 1100 or GWSL 2100)
• Output: Modbus RTU, RS-485
• Reads data from 68 individual temperature cables and spears
• Supply: 230 VAC / 115 VAC
• Protection class: IP66
• Certificates: IECEx, ATEX

• Works as a multiplexer, enabling 4 additional temperature cables or spears to be connected to GWAB11 converter
• Another GWNET11 can be connected in parallel, further expanding inputs of GWAB11 by 4
• Operating temperature: -20...+50 °C
• Protection class: IP66
• Certificates: IECEx, ATEX

• Data logger (4 MB, up to 1 year of backup)
• Sample rate: 60 s...18 h
• Communication: GSM/3G/HSPA/Telstra arba GSM/2G/GPRS arba CDMA/Verizon
• Certificates: FCC, ETSI, C-TICK
• Option: GPS
• 1 input: for sensors with SDI-12 interface
• 2 input: double analog/digital/counter input or I2C interface
• USB connection: for charging and RanchMgr communication
• LCD screen
• Remote control
• Solar panel
• Supply: battery (typical run time without sunlight is 1 month)

Automatic portable solid state particle (dust) meter EMIOTEST 3114 is designed for periodic solid state particle concentration measurement in closed channels, i.e. flue gas, and perform other functions:

• Periodic measurement of solid state particle concentration in stationary sources of emission
• Solid state particle concentration measurement in gasses
• Testing of dust removal equipment
• Gas flow rate measurement
• Calibration and periodic control of automatic systems (AMS) by measuring the emission and mass stream of dust
• Dioxins, furans, PAH, mercury concentration measurement
• Heavy meal, HCL, HF concentration measurement

• GA-1 is designed for grease detection in separators, basins and tanks
• Easy to install, does not need calibration
• Switch output
• Remote monitoring capability
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

• GA-2 is designed for grease detection in separators, basins and tanks
• Two sensors – one is for grease detection, other – for blockage control
• Easy to install, does not need calibration
• 2 switch outputs
• Remote monitoring capability
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

Kuhlmann Ground Thawing Blankets are durable and weatherproof, designed to thaw frozen ground and soil, pipes, and protect equipment from freezing. They also work as curing blankets for various construction purposes.

Technical specifications:

• Durable PVC materials.
• Fixed temperature (70°C).
• 2-meter power cable.
• Special sizes produced upon request.
• IP67 Class.
• In normal conditions the mat thaws up to 30 cm of soil in 24 hours - or up to 60 cm in more sandy soil/ground.

• Temperature measurement range: -20...+60 °C
• Accuracy: ±0.4 °C
• Internal temperature sensor
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: 1 s...24 h
• Internal sensor
• GSM modem (GPRS)
• SMS and JSON messages can be sent via GPRS data connection
• Local alarms via LED indication, on LCD screen and acoustically by built-in beeper
• Data can be transferred to PC via USB-C interface
• Calibration certificate of manufacturer included
• Ambient temperature: -20...+60 °C
• Supply: 5200 mAh LiIon battery
• Protection class: IP67
• Warranty: 3 years

• CO2 concentration measurement range: 0...5000 ppm
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: 1 s...24 h
• Internal sensor
• GSM modem (GPRS)
• SMS and JSON messages can be sent via GPRS data connection
• Messages can be sent on alarms and periodically
• Data can be transferred to PC via USB-C interface
• Calibration certificate of manufacturer included
• Ambient temperature: -20...+60 °C
• Supply: 5200 mAh LiIon battery
• Protection class: IP20
• Warranty: 3 years

• Measures temperature, humidity, calculates dew point
• Temperature measurement range: -20...+60 °C
• Humidity measurement range: 0...100 %
• Memory: up to 500,000 values in non-cyclic mode (350,000 in cyclic)
• Logging interval: 10 s...24 h
• Display and alarm refresh interval: 1 s...1 min
• Protection class: IP67
• Warranty: 3 years
• Calibration certificate of manufacturer is included (according to EN ISO/IEC 17025)
• Free analytical software COMET Vision

• Inputs: 4x external Pt1000 sensors
  • Measuring range: -200…+260 °C
  • Accuracy: ± 0.2 °C (± 0,2 %, when temperature is in range of +100...+260 °C)
  • Resolution: 0,1 °C
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: adjustable 1 s, 10 s, 1 min
• GSM modem (GPRS)
• SMS and JSON messages can be sent via GPRS data connection
• Messages can be sent on alarms and periodically
• Data can be transferred to PC via USB-C interface
• Calibration certificate included
• Ambient temperature: -20...+60 °C
• Supply: rechargeable Li-Ion battery A8200, 3.6V/5200mAh
• Protection class: IP20
• Warranty: 3 years

• Digital inputs: 2
• 1-Wire input (up to 8 sensors)
• RS-485 input (up to 8 sensors)
• Analog inputs: 4 (2 x 0...10 VDC, 2 x 0...10 VDC / 4...20 mA, WEB control)
• Relay outputs: 4 (NO/NC)
• Setup via USB or SMS
• Data logger for up to 52 000 records
• Webserver
• Periodical upload of data logger file to a remote HTTP server
• HTTP Post, HTTP API
• SMS alarms (up to 5 numbers)
• E-mail alarms (up to 5 recipients), SMT with TLS support
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...24 VDC

• Digital inputs: 2
• 1-Wire input (up to 4 sensors)
• Analog inputs: 2 (0...60 VDC)
• Relay outputs: 2 (NO/NC)
• Setup via USB or SMS
• Webserver
• HTTP Post, HTTP API
• SMS alarms (up to 5 numbers)
• E-mail alarms (up to 5 recipients), SMTP with TLS support
• Operating temperature: 0...40 °C
• Warranty: 3 years
• Supply: 10...28 VDC

• Used with grain temperature sensor cables GWSL 1100, GWSL 2100 and spear sensors GWTL-R
• Cable length up to 200 m (including the temperature cables)
• Up to 32 values of temperatures are shown in cycle
• Weight: 240 g (with batteries)
• Case material: ABS
• Supply: 2 x AA (battery life circa 1 year)
• Operating temperature: -20...+40 °C

A simple handheld, accurate vape particulate, vape smoke detector FD-VAPE-HAND that indicates air quality for home, work, vehicles, or other occupational spaces. Excellent to detect vape, cigarette smoke, and e-cig smoke.

• Sensor: Laser scattering PM1.0, PM2.5, PM10 sensor
• Detection Range: 0-1000 µg/m3
• Response Time: <10 seconds
• Temperature measurement range: 0…50 °C (can be selected between Fahrenheit and Celsius)
• Humidity measurement range: 10…95 %RH
• Sound alarm when vape detected
• Auto off: after 5 minutes
• Power: 1000 mAh Li-Ion Battery, up to 8 hours of operation, (recharge USB 5V/1A)
• Dimensions: 5,1 x 1,8 x 8,6 cm
• Weight: 142 gr

• Enables the PC to be connected to HART interface, i.e. to configure a device
• Active operation: current loop is supplied
• Passive operation: used in an existing current loop
• Included HART-Tool software
• Supply: from USB
• Galvanic isolation between USB and HART

• Communicates with devices supporting HART and LHP interfaces
• Supports universal, common commands
• HART connector: BNC
• Supply: 9 V accumulator (charged via USB)
• Operating temperature: -20...+50 °C
• Operating humidity: 0...80 % RH
• Protection class: IP40

• Designed to measure the moisture of hay and straw
• Moisture measurement method: resistive
• Moisture range: 8...50 %

High frequency limit level sensors with elimination of deposits and foam on the electrode for vertical mounting

• High frequency limit level sensors with elimination of deposits and foam on the electrode for vertical mounting,
• Resistant to adhesion of viscous and sticky media (ketchup, yoghurt, spreads, syrups, creams, pastes, cleaning agents, alkalis, etc.)
• Unique material type resolution function "Medium window" (the sensor is sensitive only to the set medium and does not react to substances with lower and higher permittivity)
• Can replace vibration level sensors
• Universal design for all types of liquids (electrically conductive or non-conductive)
• For vertical mounting
• Adjustment with a magnetic pen before installation

• High level detection
• Oil on water surface detection
• Designed for usage in separators, basins and tanks
• Easy to install, does not need calibration
• Reliable long-term se in harshest conditions
• Acoustic and visual alarms
• 2 switch outputs
• ATEX certified
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

RFLS-53 can be used in demanding applications to indicate powder, dust and hygroscopic materials and can replace mechanical rotary level switches or standard capacitive level switches.

• The RFLS-53 uses the principle of high-frequency capacitive measurement
• It responds to the mass of the material and ignores deposits and material residues on the measuring part
• For demanding applications to indicate powder, dust and hygroscopic materials
• The sensor is available in several versions with different types of outputs and electrical connections
• The RFLS-53 fully replaces the older CLS-53, its electrical connection is different for the 230 VAC version (3 wires)

Recorder HT20 is designed for measurement and logging of ambient humidity and temperature.

• Especially suitable for server rooms, pharmaceutical and food warehouses, laboratories, museums and greenhouses
• Logged data is stored in the internal memory and then sent digitally to the user (over Ethernet)
• Alarms are formed by e-mails, on the webserver, using symbols on screen or via audible alarms
• HT20 can be powered by the Ethernet network (PoE – Power over Ethernet), additionally ordered
• FTP, DHCP, SMT, Modbus TCP/IP protocols

SM400-4-TH humidity and temperature sensor supports MODBUS RTU protocol over the RS-485 interface. Suitable for environmental quality monitoring offices, server room, data center and indoor air

• Changeable communication parameters
• Non-volatile memory for all settings
• Operating temperature range: -20…60°C
  • Accuracy (min): ± 0.4 °C (in -10…+ 60 °C range)
  • Accuracy (max): ± 0.6 °C (in -20…+ 60 °C range)
  • Resolution: 0.1 °C
• Operating relative humidity range: 10…90% (non-condensing)
  • Accuracy (min): ± 3.0 % RH (in 20…80 % RH range)
  • Accuracy (max): ± 5.0 % RH (in 10…90 % RH range)
  • Resolution: 0.1 % RH
• Ingress protection: IP20
• Operating voltage range: 4.5…26 VDC

• Temperature measurement range: 0...50 °C
• Humidity measurement range: 0...100 %
• Output: 2 x 0...10 V / 2...10 V / 4...20 mA
• Option: LCD display
• Option: relay output
• Option: Modbus RTU
• Supply: 24 VDC/VAC
• Operating temperature: 0...50 °C
• Protection class: IP20

• Temperature measurement range: 0...50 °C
• Humidity measurement range: 0...100 %
• Output: 2 x 0/2...5/10 VDC
• Option: LCD display
• Option: Modbus RTU
• Supply: 24 VDC/VAC
• Operating temperature: 0...50 °C
• Protection class: IP54

• Temperature measurement range:
  a) Ambient model: -20...+80 °C
  b) Remote model with polycarbonate probe: -20...+80 °C
  c) Remote model with stainless steel probe: -40...180 °C
• Relative humidity measurement range: 0...100 %
• Calculates dew point, absolute humidity, enthalpy and combination ratio
• 4-wire analog output: 0...5/10 V or 0/4...20 mA
• 2 relay outputs
• Versions with or without display
• Protection class: IP65 (ABS V0 housing)

• Pressure range: from 0...2,5 to 0...600 bar
• Output signal: 1 or 2 PNP transistors
• Process temperature: -40...+125 °C
• Process connection: G1/4" m, G1/4" m (Manometer), 1/4"NPT m, 1/8"NPT m, 7/16"-20UNF SAE J512 f, 7/16"-20UNF SAE4 m, 7/16"-20UNF m DIN3866, R1/4" m DIN3858, R1/4" m DIN2999, R1/8" m, M10x1 m, M12x1.5 m
• Protection class: IP65, IP67

• Long-life metal-oxide gas sensor
• Range 0...100 % LEL H₂
• Resolution 0,1 % LEL H₂
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor options

• Hydrogen pressure transmitter’s measuring principle: Thin-film-on-steel
• EC79 and ECER-134 certification pending (see product website for current situation)
• Applications: Fuel cells, fueling stations, hydrogen compressors, hydrogen tanks, vehicles with H drive
• Measuring range: 0…1050 bar / 0…15000 psi *(see product datasheet)
• Measuring accuracy at 25 °C typ.: ± 0.3 / 0.5 % FS typ.
• Output signal: 4...20 mA, 0.5...4.5 VDC, 0...5 VDC, 1...5 VDC, 1...6 VDC, 0...10 VDC, 0.1...10.1 VDC, 0.5...4.5 VDC ratiometric, Switching output: 1 or 2 PNP
• Pressure connections: G1/4" m, 1/4"NPT m, 7/16"-20UNF SAE4 m
• Ambient temperature: 40°C…+85°C

• Stable long-life electrochemical gas sensor
• Range 0...100 / 0...1000 ppm H₂S
• Resolution 0,1 / 1 ppm H₂S
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 10 / 20 ppm H₂S

• Stable long-life electrochemical gas sensor
• Range 0...100 / 0...1000 ppm H₂S
• Resolution 0,1 / 1 ppm H₂S
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor option

• Electrochemical gas sensor
• Range: 0...100 / 0...2000 ppm H₂S
• Resolution: 0,1 / 1 ppm H₂S
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• For continuous level measurement in non-pressure tanks, vessels and pipes
• Output: 4...20 mA / 0...10 V
• Measuring range up to 100 m (H2O)
• High long-term stability
• Accuracy: 0,5 % within the total range
• LED indication
• Operating temperature: -20...+70 °C
• Supply: 12...34 VDC
• Protection class: IP67 / IP68

Hydrostatic pressure transmitter HLM-25S is designed for level measurement in non-aggressive fluids in non-pressure tanks, boring holes, wells. Measuring range is up to 100 m in water. Current or voltage output.

HST comes in three models, HST-M – standard model (IP20), HST-D – remote sensor (IP65) and HST-A – channel model (IP65).

The Kuhlmann Electro-Heat IBC Immersion Heater is an efficient solution for heating liquids in Intermediate Bulk Containers (IBCs), addressing viscosity challenges to enhance industrial productivity. Suitable for a variety of substances, it ensures consistent heating and easy liquid management. Its applications span multiple industries, including chemical processing, pharmaceuticals, food and beverage, and oil and gas. Constructed with durable stainless steel and featuring precise temperature control, this immersion heater combines performance with longevity.

Technical Specifications:

• Surface load: 2.2 W/cm²
• Power: 2000W
• Supply: 230V 1-phase
• Stainless steel tube element AISI 316L (1.4404)
• Length of element: 950mm
• Diameter of element: ø100mm
• Heated zone: 300mm
• Integrated PT100 sensor
• Minimum level of liquid during heating: 500mm (half full)
• Cable between heater and control unit: ~2800mm
• Digital controller: 0-90°C

An IBC silicone base heater efficiently heats up contents in an IBC container, making it easy to discharge viscous or semi-solid products with minimal waste. The 2700W heater can heat water from 15°C to 70°C in less than 40 hours. Kuhlmann’s durable silicone base heater fits various IBC containers and is easy to install and use. It can also be mounted with a digital temperature controller for precise temperature control.

Technical Specifications:

• Dimensions: 1035 - 851mm.
• Materials: 100% silicone.
• 1,5 meter power cord with no plugs.
• 0-150°C PT100 Sensor System temperature controller (additional product).
• Heats water from 15°C - 70°C in less than 40 hours in a fully loaded IBC Container.

idOil sensors are an integral part of the idOil oil separator alarm system and they are to be used with the idOil control units. All idOil sensors are digital and polarity free. Standard cable length is 5 m.

• idOil-LIQ high liquid level sensor|
  Indicates when the liquid level in the oil separator rises excessively e.g. in an outlet blockage situation.
• idOil-OIL oil sensor
  Detects oil and indicates when the separator’s oil storage is full.
• idOil-SLU sludge sensor
  Monitors the sludge layer in the oil separator and indicates when the sludge layer has reached its maximum level.

“idOil®” is an alarm system intended for monitoring liquid levels particularly in oil and sand separators. The system consists of the idOil control unit and the idOil sensors installed in the separator. The sensor cables can be extended with a cable connector or connection box. One to three digital idOil sensors of the same or different type can be connected to the control unit. The sensors can be used to monitor the following:

• High liquid level (idOil-LIQ high liquid level sensor)
• Oil layer detection (idOil-OIL oil sensor is for class IIA explosive liquids and idOil-OIL-Soil sensor is for class IIB explosive liquids)
• Sludge layer detection (idOil-SLU sludge sensor)

“idOil®” is an alarm system intended for monitoring liquid levels particularly in oil and sand separators. The system consists of the idOil control unit and the idOil sensors installed in the separator. The sensor cables can be extended with a cable connector or connection box. One to three digital idOil sensors of the same or different type can be connected to the control unit. The sensors can be used to monitor the following:

• High liquid level (idOil-LIQ high liquid level sensor)
• Oil layer detection (idOil-OIL oil sensor is for class IIA explosive liquids and idOil-OIL-Soil sensor is for class IIB explosive liquids)
• Sludge layer detection (idOil-SLU sludge sensor)

• Universal input for measuring temperature, resistance and standard signal
• 4 alarm outputs with signaling on LED diodes
• Digital output: RS-485 modbus (can be programmed through RS-485)
• Analog signal output: 0/4...20 mA or 0...10 V
• Two-line LCD display
• Mathematical functions for converting the measured value
• Protection grade: frontal side – IP65 / from terminal side – IP10
• Operating temperature: -25...23...55 °C

• Input: 0...20 mA, 4...20 mA, 0...1 V, 0...10 V
• Display: 4 digits (value range: -1999...4000)
• Measurement unit can be displayed
• Option: 2 x relay output for control and alarm
• Option: sensor supply output
• Option: RS-485 Modbus RTU interface
• Manual calibration
• Stores maximum and minimum measurement values
• Operating temperature: 0...50 °C
• Supply: 230/110 VAC / 12/24 VAC / 9...30 VDC / 7...24 VAC

• Measurement of parameters: voltage, current, active, reactive and apparent power, cosφ, tgφ, frequency, active, reactive and apparent energy, active power 15 minutes, voltage 10 minutes
• Current and voltage harmonics analysis up to 51st (measurements available via RS-485)
• Programmable input:
  • Current: 0…1 / 0…5A
  • Voltage: 0…100V / 0…230V / 0…400V
• Output:
  • Analog: 0/4...20 mA or 0...10 V
  • Relays: 1 or 4
  • Binary (OC)
• Digital output: RS-485 modbus (can be programmed through RS-485)
• Two-line LCD display
• Pulse output to measure energy consumption
• 4 alarm outputs with signaling on LED diodes, working in 7 different modes
• Conversion of any measured value into an analog signal 0/4...20 mA or 0...10V
• Protection grade: frontal side – IP65 / from terminal side – IP10
• Operating temperature: -25...23...55 °C

• Voltage measurement ± 600 V, current measurement via shunt, power, energy and capacity measurement of d.c. circuits
• 4 alarm outputs with signaling on led diodes, working in 7 different modes
• Analog outputs: 0/4...20 mA or 0...10 V
• Digital output: RS-485 / MODBUS RTU
• Two-line LCD display
• Protection grade: frontal side – IP65 / from terminal side – IP10
• Operating temperature: -25...23...55 °C

N19Z meter measures AC voltage and current. The meter is designed to work in 3-phase networks or 1-phase networks.

• Nominal input voltage: 300 or 600 V 1 phase / 100…500 V 3 phase
• Nominal input current: 1A or 5A
• True RMS measurement (up to 15th Harmonic)
• On site programmable PT/CT ratios
• User selectable 3ph3wire or 3ph4wire Network (for 3ph)
• Onsite selection of Auto scroll / Fixed Screen (for 3ph)
• 4 Digits 14mm ultra bright LED Display
• Protection: IP54 front / IP20 back
• Parameter Screen recall: In case of power failure, the instrument memorizes the last displayed screen
• Accuracy: ±0.5% of nominal value

The CM22 provides essential video security features in a compact form. It is a 3MP (2048x1536) camera with 10 meters of IR light range, and includes people and vehicle detection for motion search and trajectory analysis. The CM22 camera, combined with the SV23 vape detector and air quality sensor, and powered by the Verkada Command cloud computing platform, creates a powerful vape prevention and logging system.

• 30, 60 and 90 days of data retention (256…768 GB) on hardware and cloud back-up. If the connection to the Command cloud is lost, data is saved onboard and synced once the internet connection is restored
• Easy to install: no NVR, DVR, servers or port forwarding, just PoE connection
• Alerts: Camera status (offline), motion detection, people detection, vehicle detection, crowd detection, line-crossing detection, loitering detection
• Privacy: live face blur, privacy regions and audit log
• Field of view: Horizontal: 95°; Vertical: 69°; Diagonal: 130°
• Operating temperature / humidity: -10…50 °C / 0…90 %
• Connection and power input: RJ-45, PoE (IEEE 802.3af type 1)
• Certifications: FCC, ICES, RCM, VCCI, CE, UKCA, EN 50155 railway compliance, UL/cUL/IEC 62368-1, NOM
• Warranty: 5 years

Indoor temperature meter / transducer Txx18, designed for temperature, humidity and barometric pressure measurement.