Поиск

• Pressure measurement range: -250...2500 / -250...7000 Pa
• Input: 2 x  0...10 V, NTC10k, Pt1000, Ni1000, binary
• Output: Modbus RTU
• Temperature compensation in range of 0...50 °C
• Allowed overpressure: 25 kPa
• Supply: 24 VDC/VAC
• Operating temperature: -20...+50°C
• Protection class: IP54

Differential pressure transmitter with Modbus interface DPT-MOD-2000, DPT-MOD-3000 and DPT-MOD-5000 for usage in air and non-aggressive gasses.

Differential 8 range pressure transmitter DPT250, DPT2500 and DPT7000. Designed for usage in air and non-aggressive gasses.

• Pressure measurement range: from 0...1 bar to 0...6 bar
• Made to be used for air-conditioning, heating and water systems
• For neutral fluids and non-aggressive gases, compatible with refrigerants
• Output: 4...20 mA
• Supply: 24 VDC/VAC
• Operating temperature: -20...+80°C
• Protection class: IP65

• Input: differential pressure
• Typical areas of use are chemical industry and process engineering
• Measurement range: 75 mbar...70 bar
• Output: 4...20 mA HART
• Supply: 12...30 VDC
• Operating temperature: -40…+85 °C
• Protection class: IP65
• Process connection: 1/4-18NPT

• Pressure range: from 0...1 to 0...16 bar
• Output signal: 4 ... 20 mA (P1–P2)
• Process temperature: -25...+125 °C
• Process connection: G1/4" f
• Protection class: min. IP65

• PID controller
• Pressure measurement range: 0...2500 Pa / 0...7000 Pa
• Switchable between air flow and pressure measurement
• Output: 0...10 V / 4...20 mA
• Option: autozero function
• Allowed overpressure: 25 kPa
• Supply: 24 VDC
• Operating temperature: -20...+50°C
• Protection class: IP54

• PID controller
• Pressure measurement range: 0...2500 Pa
• Modbus RTU communication
• Control output: 0...10 V
• External input: 0...10 V / thermistor / binary
• LCD display
• Temperature compensation
• Allowed overpressure: 25 kPa
• Supply: 24 VDC
• Operating temperature: -20...+50°C
• Protection class: IP54

• RS-485 (Modbus) protocol temperature and humidity sensor
• Temperature measurement range: -20...+60 °C
• Humidity temperature range: 5...95 %RH
• Accuracy: ±3 %RH (20...80 %RH) / ±5 %RH (5...95 %RH) / ±0,4 °C (-10...+60 °C) / ±0,6 °C (-20...+60 °C)
• Resolution: 12 bits for temperature and humidity
• Long-term stability
• Warranty: 3 years

SI-COLO 15 color digital sensor works according to 3-color principle using LED diode as light source. Color sensor parameters can be set using a PC via RS232 interface.

SI-COLO4 31 color digital sensor works according to 3-color principle using LED diode as light source. Color sensor parameters can be set using a PC via RS232 interface.

• 1-Wire protocol temperature and humidity sensor
• Temperature measurement range: -20...+60 °C
• Humidity temperature range: 10...90 %RH
• Accuracy: ±3 %RH (20...80 %RH) / ±5 %RH (10...90 %RH) / ±0,4 °C (-10...+60 °C) / ±1 °C (-20...+60 °C)
• Resolution: 14 bits for temperature, 12 bits for humidity
• Long-term stability
• Warranty: 3 years

• 1-Wire protocol temperature and humidity sensor
• Temperature measurement range: -20...+60 °C
• Humidity temperature range: 10...90 %RH
• Accuracy: ±3 %RH (20...80 %RH) / ±5 %RH (10...90 %RH) / ±0,4 °C (-10...+60 °C) / ±1 °C (-20...+60 °C)
• Resolution: 14 bits for temperature, 12 bits for humidity
• Long-term stability
• Warranty: 3 years
• Connection: RJ-11

• RS-485 protocol temperature and humidity sensor
• Temperature measurement range: -20...+60 °C
• Humidity temperature range: 5...95 %RH
• Accuracy: ±3 %RH (20...80 %RH) / ±5 %RH (5...95 %RH) / ±0,4 °C (-10...+60 °C) / ±0,6 °C (-20...+60 °C)
• Resolution: 14 bits for temperature, 12 bits for humidity
• Long-term stability
• Warranty: 3 years
• Connection: RJ-45

• Outputs 0...10 V, 0...20 mA
• Display LED 4 digits, 14 mm height

• Output 0...20 mA
• Display LED 4 digits, 14 mm height

• Digital pulse counter - tachometer ECH4400
• Count inputs: 2 channels (max 50 kHz, 5…30 V pulses), can be selected as PNP or NPN input
• Counting frequency: (20, 50, 100, 500, 1000, 5000) Hz, (10, 20, 30, 40) kHz
• Control outputs: 2 relay NO / NC 250 V, 2 A
• SSR outputs: Open collector output (Max.: 30 VDC, 50 mA)
• RS485 Modbus communication interface (custom ordered)
• Power supply: 90…250 V AC; 10…30 V DC; 8…24 V AC (custom ordered)
• Auxiliary supply output: 12 VDC, max 50 mA
• Ambient temperature: 0…+50 °C
• Case protection: front panel IP65, rear panel IP20

• 1-Wire protocol temperature sensor
• Temperature measurement range: -40...+85 °C
• Accuracy: ±0,5 °C (-10...+85 °C) / ±2 °C (-40...+85 °C)
• Resolution: 12 bits
• Very low current consumption
• Warranty: 3 years
• Protection class: IP65

• 1-Wire protocol temperature sensor
• Temperature measurement range: -40...+85 °C
• Accuracy: ±0,5 °C (-10...+85 °C) / ±2 °C (-20...+85 °C)
• Resolution: 12 bits
• Very low current consumption
• Warranty: 3 years
• Connection: RJ-11

• Temperature range: -30...70 °C
• Accuracy: ±0,5 °C (-10 °C...40 °C) / ± 1 °C
• Display: LCD
• Battery work time: 2 years
• Battery type: 1/2 AA (3,6 V)
• Dimensions: 45x100x19 mm
• Protection class: IP65
• Weight: 85 g
• Holder is ordered separately

Duct temperature transducer with 4...20 mA output is built in a durable watertight case. The length of stainless steel stem is 120 mm. Calibration certificate is included.

Duct temperature transducer with 0...10 V output is built in a durable watertight case. The length of stainless steel stem is 120 mm. Output temperature range is user adjustable. Calibration certificate is included.

Gas cylinder heating jacket prevents frosting and ensures a constant flow rate for laboratory and industrial processes. Equipped with a digital thermostat, it is suitable for various gases and has a durable, lightweight design with quick-release buckles for easy attachment and transport.

• Digital thermostat with a heating range from 0 – 90ºC
• Durable, lightweight design with quick-release buckles
• Suitable for various gases, including SF6, Propane, Nitrogen, Oxygen, BCl3, WF6, and HF
• Silicone impregnated fabric
• Fiberglass insulation
• Teflon heating wire
• 3 meter power cable (no plug)
• Safety Thermostat
• IP40 Protection

The ATEX Gas Bottle Heater series is a safe, efficient, and customizable heating solution for gas bottles located in hazardous areas.

• Nominal voltage: 230 VAC*
• Nominal power: 380W, 850W, 850W (10L, 50L, 79L) or application-specific
• Max. operating temperature: +50/60°C (jacket max. 200°C)
• Temperature class: T6, T5, T4, T3 (depending on temperature setting limiter)
• Electrical connection terminal boxes for network (EX-e) / sensor (EX-i)
• Protection class: IP65/I
• Zones 1/2 (gas); 21/22 (dust)
• Sensors: 2xPt100 (EX-i, EX-e)
• Weight: 6kg, 9.5kg, 10kg (10L, 50L, 79L)

The silicone heater increases flow from LPG cylinders. By adding heat directly to the cylinder, the silicone heater maximizes LPG vaporization, ensuring that your supply lasts longer and works better, even under high demand.

Dimensions: 890mm x 120mm
Voltage: 230V
Wattage: 500W
Compatible with 22kg and 33kg standard size gas bottles
Spring mounted for perfect cylinder fit
Features a 40°C limiter and a 55°C safety fuse with manual reset

Electrode level sensor AUREGIS LJ-EB for liquids level measurement. By request sensor can be made with 2 to 5 electrodes with different lengths.

• LJ-EB2 - 2 electrode level sensor
• LJ-EB3 - 3 electrode level sensor
• LJ-EB4 - 4 electrode level sensor
• LJ-EB5 - 5 electrode level sensor

Technical specifications:

• Electrodes: Stainless steel DIN 1.4301 (AISI 304)
• Insulator: Teflon
• Electrode extension: Stainless steel DIN 1.4301 (AISI 304)
• Process connection: Stainless steel DIN 1.4301 (AISI 304)
• Connection head: Aluminum alloy
• Electrode length: Standard – 1000 mm or by request
• Process connection: R1 1/2“
• Process temperature: -30...+180 °C

Utilizing unique dual-sensing technology, the device combines electromagnetic induction with an integrated ultrasonic sensor to provide highly accurate detection of both liquid level and flow velocity. Specifically optimized for partially filled pipes, open channels, and gravity-fed systems, the unit achieves an outstanding accuracy of ±1–2% of the actual flow rate.

• Internal pipe diameter: DN80…DN600
• Flow velocity (min. / max.): 0,46…7,5 m/s
• Accuracy: ± 1…2 % of actual flow (depends on flow profile and level detection)
• Process Temperature: 0…+70 °C
• Coating materials: hard rubber
• Maximum working pressure: No pressure (gravity flow) or 10 bar if pipe is full
• Output signal: 2× pulse / flow switch (max. 400 Hz), 4 ... 20 mA, 1× RS485 interface (Modbus / M-Bus protocol), M-Bus, HART, Ethernet module (TCP/IP, integrated web server)
• An optional IoT module allows measured values to be transmitted wirelessly via NB-IoT to the cloud
• Data archiving on a micro-SD card
• Process connections: flange
• Maximum ambient temperature: 55 °C
• Power supply: 24 V AC / DC, 230 V AC
• Protection class: IP68 for sensor, IP65-IP68 for transmitter

FLOW 38 MID version with certification, allowing the flow meter to be used for utility metering. FLOW 38 MID is certified for use with drinking water. The FLOW 38 MID electromagnetic flow rate meter is a precise measuring device designed to measure the flow of electrically conductive liquids.  The electronic unit (display) can be connected directly to the body (rotatable up to 350° for convenient viewing). Various process connection versions are available. A wide selection of materials for the internal surfaces in contact with the process medium allows the device to be adapted to various liquids.

• Internal pipe diameter: DN10…DN400
• Flow velocity (min./max.): 0,1…12 m/s (R40, R50)
• Accuracy: 0.2% in the 1:100 range, 0.5% in the 1:200 range
• Maximum medium temperature depending on the inner coating: 150 ℃
• Coating materials: rubber, teflon, ceramic
• Maximum working pressure: up to 16 bar
• Output signal: pulse, 4-20 mA, RS485 (Modbus RTU/ M-bus)
• An optional IoT module allows measured values to be transmitted wirelessly via NB-IoT to the cloud
• Process connections: Flange, Thread
• Maximum ambient temperature: 50 °C
• Power supply: 24 VAC/VDC, 110... 230 VAC
• Protection class: IP65, IP67, IP68

The FLOW 38 electromagnetic, bidirectional flow and flow rate meter is a precise measuring device designed to measure the flow of electrically conductive liquids. Due to the wide range of configurations available, this device is used in many industries. The electronic unit (display) can be connected directly to the body (rotatable up to 350° for convenient viewing) or connected via a cable up to 30 meters long. Various process connection versions are available. A wide selection of materials for the internal surfaces in contact with the process medium allows the device to be adapted to various liquids. FLOW 38 is certified for use with drinking water. There is also a version of the Flow38 with MID certification, allowing the flow meter to be used for utility metering.

• Internal pipe diameter: DN4-DN600
• Flow velocity - bidirectional (min./max.): 0.2…12 m/s
• Accuracy: 0.2% in the 1:100 range, 0.5% in the 1:200 range
• Maximum medium temperature depending on the inner coating: 150 ℃
• Coating materials: rubber, Rilsan, Teflon, ceramic
• Maximum working pressure: up to 100 bar
• Output signal: pulse, 4-20 mA, RS485 (Modbus RTU/ M-bus), Modbus TCP/ IP, HART
• An optional IoT module allows measured values to be transmitted wirelessly via NB-IoT to the cloud
• Process connections: Flange, Sandwich, Food grade fittings (clamp), Thread
• Maximum ambient temperature: 55 °C
• Power supply: 24 VAC/VDC, 110... 230 VAC
• Protection class: IP65, IP67, IP68

The FLOW45 electromagnetic flowmeter is equipped with a lithium battery, so it does not require an external power supply. The device has high accuracy in terms of full flow rate. Before each measurement, automatic diagnostics of all functions and parts necessary for proper measurement are performed. The device has a built-in empty pipe test and if there is no full flow, it will invalidate the entire measurement, as well as assess the flow direction and record the appropriate data.

• Internal pipe diameter: DN10…DN200
• Flow velocity (min. / max.), bidirectional: 0,2…12 m/s (1/60)
• Accuracy: 1 % for 1…10 m/s
• Maximum medium temperature depending on the inner coating: 150 ℃
• Coating materials: rubber (hard, soft, drinking water certified), Teflon, ceramic, Rilsan
• Maximum working pressure: up to 100 bar
• Output signal: pulse, RS485
• GSM data transmission module
• Data archiving on a micro SD card
• Process connections: flange, thread, sandwich, food grade
• Maximum ambient temperature: 5…55 °C
• Power supply: replaceable lithium battery (last up to 5 years) / external (12 V DC, max. 500 mA)
• Protection class: IP65, IP67, IP68

Absolute encoder AC58. Vibration- and overload-resistant. Wide range of appliance.

• Size Ø58, axis - Ø10mm

Incremental encoder RI32-O (Hengstler, Germany) is resistant to vibration and overloading, has a wide area of application.

• Size Ø30 mm, axis – Ø5 or Ø6 mm

Incremental encoder RI36. Vibration- and overload-resistant. Wide range of appliance.

• Size Ø36.6 mm, axis - Ø4/6/8/10 mm

Incremental encoder RI38. Vibration- and overload-resistant. Wide range of appliance.

• Size Ø39 mm, axis - Ø6 mm

Incremental encoder RI42. Vibration- and overload-resistant. Wide range of appliance.

• Size Ø40 mm, axis - Ø6 mm

Incremental encoder RI76. Vibration- and overload-resistant. Wide range of appliance.

• Size Ø76 mm, ašis - Ø15...42 mm

Incremental encoder RX70. Vibration- and overload-resistant. Wide range of appliance.

• Size Ø69mm, axis - Ø10mm
• Certified for ATEX zone
• Complies to category II 2 gas and dust
• IP65/IP66 protection class
• Certified: II 2 G/D E Ex d II T4/T6 IP65/IP66 135 °C bz. 85 °C

• Universal industrial rotary encoders
• Up to 40,000 steps
• High degree of signal accuracy
• Ingress protection up to IP67
• Fits most applications due to many flange and connection options
• Suitable for high shock loads
• Typical fields of application are machine tools, CNC axes, Packaging machines, Motors/ drives, Injection molding machines, Sawing machines
• Operating temperature up to 100°C (RI 58-T)

• Measurement of 85 power network parameters, including current and voltage harmonics up to 31st in 1-phase 2-wire or 3-phase 3 or 4-wire.
• Accuracy of active energy measurement 0.5S or 0.2S
• RS-485 (Modbus RTU) interface for remote monitoring of measured parameters
• The dual-tariff function for energy billing applications
• 2 relay outputs
• Pulse output: SO output as pulse or alarm
• 2 digital inputs as energy consumption, pulse counting and contact status
• Measured values displayed in 10 configurable screens
• Possibility programming of current and voltage ratio without restrictions as in MID-certified products
• Measurement inputs dedicated for x/1A and x/5A current transformers
• Power supply: 100…550 V a.c. / d.c.
• DIN rail mounted

• Analog inputs: 6 (0...10 VDC / 4...20 mA, configurable, isolated)
• Digital inputs: 4 (isolated)
• RS-485 input (up to 24 Modbus RTU registers)
• Memory: 70 000 values
• Ethernet connection
• Modbus RTU to Modbus TCP conversion
• Webserver
• Periodical upload of data logger file to a remote HTTP server
• HTTP Post, HTTP API
• SNMP alarms (up to 5 recipients)
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...28 VDC

• Ethernet connection
• Analog inputs: 2 (0...10 VDC)
• Digital inputs: 2
• Relay outputs: 2 (NO/NC)
• 1-Wire input (up to 8 sensors)
• Memory: 70 000 values
• Modbus TCP/IP support
• Webserver
• XML/JSON, HTTP API commands
• SNMP alarms (up to 5 recipients)
• E-mail alarms (up to 5 recipients)
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...28 VDC

• Ethernet connection
• Digital inputs: 1
• Relay outputs: 8 (NO/NC)
• Webserver
• XML and HTTP API commands
• E-mail alarms (up to 5 recipients), SMTP with TLS support
• SNMP alarms
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...14 VDC

• Ethernet connection
• Modbus TCP/IP
• Digital inputs: 4
• 1-Wire input (up to 8 sensors)
• Analog inputs: 4 (0...60 VDC)
• Relay outputs: 4 (NO/NC)
• Configurable inputs
• Webserver
• HTTP Post, HTTP API
• E-mail alarms (up to 5 recipients), SMT with TLS support
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...28 VDC

• Stable long-life electrochemical gas sensor
• Range 0...10 / 0...200 / 0...1500 ppm C₂H₄
• Resolution 0,1 / 1 / 5 ppm C₂H₄
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485

• Stable long-life electrochemical gas sensor
• Range 0...10 / 0...200 / 0...1500 ppm C₂H₄
• Resolution 0,1 / 1 / 5 ppm C₂H₄
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor

• Electrochemical gas sensor
• Range: 0...10 / 0...200 / 0...1500 ppm C₂H₄
• Resolution: 0,1 / 1 / 1 ppm C₂H₄
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -20...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Electrochemical gas sensor
• Range: 0...20 / 0...100 ppm C₂H₄O
• Resolution: 0,1 / 1 / 5 ppm C₂H₄O
• Analog output: 2 x 4...20 mA / 0a...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -20...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Air flow monitor with switching output for control cabinet installation
• Safely and reliably monitor hot air flows up to 400°C
• Sensitive response behaviour
• Large measuring range (0.1...30 m/s), simple and fast commissioning
• Areas of application: Monitoring of heating coils, drying plants, industrial ovens, granulate dryers, surface technology plants, thermoprocess technology