Temperature measurement and control

• Real-time thermal line-scanner system for continuous or discrete process measurements
• Up to 1024 measurement points per line
• Fast scan rates up to 150 lines per second (real-time 150 Hz thermal imaging)
• Optical resolution up to 200:1
• Built-in line laser for rapid alignment
• On-board Ethernet TCP/IP communication
• PC independent alarm output
• PC independent 4...20 mA interfaces (3 outputs)
• Wide choice of models and spectral responses
• Rugged, waterproof IP65 enclosure
• Water cooling for ambient temperature up to 180 °C

• Noncontact infrared temperature meter 3i Plus (pyrometer), designed for metalworking industry where casting, hardening, heating take place. Also suitable for ceramics, semiconductor, chemical furnace temperature measurement
• It is a new generation, small size IR device for high temperature measurement
• Precise high-resolution optics guarantee high accuracy, resistant casing let the device survive falls from up to 1 meter height
• That said, measurements can be done in various environments and from various distances

• Noncontact stationary infrared temperature meter CM for temperature measurement
• Range: -20...500 °C
• Outputs: 0...5V, or TC K / J type (chosen while ordering)
• Software “DataTemp Multidrop” for remote monitoring and configuration

• Noncontact infrared thermal meter (pyrometer) ENDURANCE
• for temperature measurement up to 3200 ºC with the resolution of 0,1 ºC
• Outputs: Ethernet, profinet, 0/4...20mA (isolated), RS485, relay 48V and 300mA
• Web server
• Wider area can be measured when used with SpotScan

• Noncontact infrared thermal meter Marathon MM, wide range of accessories for various applications
• Range: -40...3000°C (in fixed ranges)
• Outputs: 0/4...20mA, RS485, mechanical switch

• Temperature measurement range: -40...+2250 °C (different versions)
• Advanced signal processing
• Wide choice of focus distances
• Durable stainless steel IP64 enclosures designed to withstand ambient temperatures from -20 to 85 °C
• Integrated laser sighting
• Galvanic isolated outputs
• Plastic lens option for food application
• Analog input for ambient compensation and adjusting emissivity setting
• USB for easy setup
• Simple, two-wire or digital installation
• Backward compatibility to old Raytek and Ircon in class sensors and accessories

• Noncontact infrared thermal meter Thermalert TX, additional accessories for various applications
• Can be used in an explosive area
• Range: -18...2000 °C (in fixed ranges)
• Outputs: 4...20mA, HART į RS232, mechanical switch (depends on version)

• Grain temperature monitoring system software for PC
• Collects data from temperature cables GWSL 1100 and GWSL 2100 and spear temperature sensors GWTL-R
• Stores, visualizes data in charts
• Alarms
• Level indication

The instrument uses a pH/ORP sensor and RTD Pt100 temperature sensors. If the Pt100 is connected the transmitter makes automatic temperature compensation (pH only).

• pH range: 0 ÷ 14.00 pH
• ORP range: 0 ÷ 1000 / 0 ÷ -1000 / -1000 ÷1000 / 0 ÷ 2000 / 0 ÷ -2000 mV
• Temperature range: -10.0 ÷ 110.0 °C / 14.0 ÷ 230.0 °F
• Resolution: 0.01 pH, 1 mV, 0.1 °C
• Digital output: RS-485 isolated
• Analog output: 4-20 mA galvanically isolated, "current loop" two wires
• Power supply: 9 / 36 Vdc
• Dimensions: 71x95x58 mm. Rail Din (4 modules)
• Operating temperature: 0…+50 °
• EMC/RFI conformity: EN 61326

Instrument PH135 is designed for liquid pH, ORP and temperature measurement.

• pH measuring range: -1.00/15.00 pH, accuracy 0.01 pH
• ORP measuring range: -1200/+1200 mV, accuracy 1 mV
• Temperature measuring ranges: -10.0/+110.0 °C ;  -14.0/+230.0 °F
• Alphanumeric LCD display
• Manual and automatic temperature compensation
• Manual or automatic calibration
• Automatic recognition of buffer solutions
• Data logging up to 100 measures
• Alcaline 9 V battery
• Dimensions: 92 x 155 x 33 mm  -  Weight:  approx. 300 g 

PoE (power over Ethernet) temperature, relative air humidity, atmospheric pressure meters T4611, T3611, T7611. Only to be used with external sensors.

Application:

• Storage rooms
• Greenhouses
• Telecommunication devices
• Servers
• A/C units

PoE (power over Ethernet) temperature, relative air humidity, atmospheric pressure meters T0610, T3610, T7610. Only to be used with internal sensors.

Application:

• Storage rooms
• Greenhouses
• Telecommunication devices
• Servers
• A/C units

• RS-485 protocol temperature and humidity sensor
• Temperature measurement range: -20...+60 °C
• Accuracy: ±0,13 °C
• Resolution: 14 bits
• Very low current consumption
• Warranty: 3 years
• Connection: RJ-45

• Output 4...20 mA
• Supply 90...250 VAC

• Measurement range: -40...+150 °C
• Temperature measurement accuracy: ± 1,3 °C
• Operating temperature: -20...+50 °C
• Used with wireless manifold
• Cable of 2 m length
• 124 refrigerant gases

Temperature regulator RE72 for ladder control, designed for temperature stabilization in plastics and food industries.

• Universal measurement input
• Auxiliary measurement input 0/4...20 mA
• Binary input
• Ladder temperature control, 15 programs with 15 intervals
• Soft start
• ON/OFF, PID, PID step-by-step (step valve control) or PID heating – cooling
• 8 alarm types, alarm control
• Timer function
• Front panel protection class IP65
• Backside protection class IP20

Relative humidity and temperature transducer P18D with display and RS-485 output, designed for temperature and humidity measurement.

• Ethernet connection
• Digital inputs: 2
• 1-Wire input (up to 2 sensors)
• Analog inputs: 2 (0...60 VDC)
• Relay outputs: 2 (NO/NC)
• Webserver
• HTTP and XML API commands
• E-mail alarms, SMTP, SNMP
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...14 VDC

Room thermostat, temperature switch with an electric socket RTBSB-001.401.

• Up to 60 logical channels for data logging (max. up to 8 analog channels)
• Inputs:
  • Measuring programmable: 0, 4 or 8
  • Binary: 2 or 6
  • Modbus RTU Client: 10 devices, 10 registers each
• Outputs:
  • Relay: 2, 6 or 8
  • Analog 0 / 4...20 mA: 0, 4 or 8
  • Supplying output for external devices: 24V d.c. / 30 mA
• Communication interfaces:
  • RS-485 MODBUS (Client and Server)
  • Ethernet: MODBUS TCP/IP, Webserver (www), FTP
  • USB Host 2.0
• Screen: Graphical color display LCD TFT 3.5”
• Internal memory 8 GB for Archiving of measured parameters
• Visualization of measurements in digital form, analog indicators, line charts, bargraphs
• Advanced mathematical functions on measured values
• Archiving and visualization of measuring data transmitted to KD6 from external devices via RS-485 MODBUS 
• Settings secured with access password
• PC software for easier setup
• Protection class: IP65 (front)
• Operating temperature: -10...55 °C
• Supply: 85...253 V a.c., 90...300 V d.c. or 20...60 V d.c.

• Measurement channels: up to 24
• Analog inputs: 12
• Relay outputs: 6 or 32
• Analog outputs: 4 or 8
• Digital outputs: RS-232, RS-485, USB
• Screen: touchscreen LCD TFT 5.7”
• Memory: CompactFlash memory card, up to 4 GB
• Visualization of measurements in digital form, analog indicators, diagrams, bargraphs
• Ethernet, Webserver, FTP server, Modbus Slave TCP/IP
• Diversified users’ access rights
• PC software
• Protection class: IP65 (front)
• Operating temperature: 0...55 °C
• Supply: 230 VAC

• Input: 4x RTD (Pt100, Pt1000, Ni100, Ni1000), resistive and potentiometer configurable input
• Output: RS-485 Master/Slave and RS-232 (MODBUS RTU/ASCII protocol)
• 2000 VAC galvanic isolation
• High accuracy
• EMC compliance - CE symbol
• Mounting on DIN rail - EN-50022 complience
• Supply voltage: 10...30 VDC
• Ambient temperature: -10...+60°C

The P17 transducer, supplied from a current loop, converts the signal from temperature sensors or a standard voltage signal into a 4...20 mA current.

• Modbus Slave over RS-485
• Modbus RTU / Modbus ASCII protocols
• Communication parameters configurable by dip-switches
• Watch-dog alarm
• Remotely configurable
• 3-way galvanic isolation (1500 VAC)
• High accuracy
• Mounting on DIN rail - EN-50022 compliance

• Ethernet 10/100 Base-T interface
• Modbus TCP server
• Webserver for configuration of device and representation of actual input values
• Galvanic isolation on all the ways (1500 VAC)
• Remotely configured
• LED indication
• EMC compliance
• DIN rail mounting

Single-use data logger for real-time measurement of temperature, humidity and light. GSM tracking and LTE 4G connectivity for smart logistics worldwide. Free usability of tempmate.®-Cloud for information viewing, reports generation and devices setup. Tempmate-GS2 have 3 models: T, TH and TE, for more information see datasheet.

• Temperature measurement range*: -200…+100 °C
• Relative humidity measurement range*: 0…100 %
• Ambient light measurement range*: 0…10000 lx
• Local storage capacity*: 24200 values for Temperature, Humidity and Light
• Shelf-Life:
  • Lithium Battery devices: 12 months (possibility to charge)
  • Non-Lithium Battery devices: 6 months (possibility to charge)
• External sensor*: PT100 (cable length: 1m, length of probe is 6cm length, 4 mm in diameter, sensor tip: stainless steel)
• Log interval: User defined: 1 min. to 60 min. (10 min. as standard setting preconfigured)
• Transmission Interval: User defined: 10 min. to 1440 min. (60 min. as standard setting preconfigured)
• Recording Duration:
  • Lithium Battery: 90 days (with standard log interval of 10 min. and transmission interval of 240 min.)
  • Non Lithium Battery: 60 days (with standard log interval of 10 min. and transmission interval of 240 min.)
• Certifications: CE, EN12830, EMC, RoHS, FCC
• Connectivity: LTE 4G cat 1 with 2G Fallback
• Report Generation: Readable in the Cloud and locally in the device through the USB 2.0 interface
• Location: LBS - GSM Localization
• Recommended Storage Temperature: -15…+25 °C

• Flexible spears for grain temperature measurement
• Rigid construction
• Diameter: Ø8 mm
• Penetration depth: up to 12 m
• Digital temperature sensor
• Measurements are done using PC software or handheld reader GW-200
• Temperature spears and cables can be integrated into single system

• Special purpose temperature sensors (AUREGIS)

• Measures ambient temperature, humidity
• Calculates dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
• Measuring ranges: -30...+80 °C, 0...100 %RH
• Output: Ethernet
• Optional connection to WiFi network via tiny wireless router TL-WIFI
• Webserver
• Measurement interval: 2 s
• Alarm protocols: E-mail, SNMP Trap, Syslog
• Supply: 9...30 VDC
• Protection class: IP30
• Calibration certificate included

• Measures ambient temperature, humidity
• Calculates dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
• Measuring ranges: -30...+105 °C, 0...100 %RH
• External sensor cable length: 1 / 2 / 4 m
• Output: Ethernet
• Optional connection to WiFi network via tiny wireless router TL-WIFI
• Webserver
• Measurement interval: 2 s
• Alarm protocols: E-mail, SNMP Trap, Syslog
• Supply: 9...30 VDC
• Protection class: IP30 for device, IP40 for sensor
• Calibration certificate included

• Measures ambient air temperature and humidity
• Integrates seamlessly into GrainWatch PC Software and displays the ambient weather conditions in real-time

• Temperature measurement range (depends on probe type): -30...+80 °C / -50...+125 °C / 0...+50 °C
• Humidity measurement range: 0...100 %
• 4 channels: 4 x external temperature probes or 4 x external temperature and humidity probes
• Output: Ethernet
• Measurement interval: 2 s
• Communication protocols: WWW, Modbus TCP, SNMPv1, SOAP, XML
• Alarm protocols: E-mail, SNMP Trap, Syslog
• Included calibration certificate
• Supply: 5 VDC
• Protection class: IP30

Temperature and air humidity transducer P19 with RS-485 output, designed for room humidity ant temperature contro. Can be used in various control and monitoring systems. Output signal is digital (RS-485, MODBUS). Transducer parameters are programmed via PC. Wall-mounted. Can work in condensation-free environment.

• Integrated temperature and humidity sensor
• Calculated values – dew point temperature, absolute humidity
• Minimal and maximal value memory
• Isolated RS-485 port

• Measures air temperature, humidity
• Calculates dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
• Measurement ranges: -30...+80 °C / 0...100 %RH
• Operating temperature: -30...+60 °C
• Ex marking: EX II 3G Ex ic IIC T6 Gc
• Output: 4...20 mA, galvanically isolated
• Adjustable by PC
• Supply: 9...30 VDC
• Calibration certificate included

• Measures air temperature, humidity in ducts
• Calculates dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
• Measurement ranges: -30...105 °C / 0...100 %RH
• Operating temperature: -30...+60 °C
• Ex marking: EX II 3G Ex ic IIC T6 Gc
• Output: 4...20 mA, galvanically isolated
• External sensor cable length: 1 / 2 / 4 m
• Adjustable by PC
• Supply: 9...30 VDC
• Calibration certificate included

Temperature and humidity transmitter with 4-20mA output.

• Measures air temperature, humidity in ducts
• Calculates dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
• Measurement ranges: -30...125 °C / 0...100 %RH
• Operating temperature: -30...+60 °C
• Ex marking: EX II 3G Ex ic IIC T6 Gc
• Output: 4...20 mA, galvanically isolated
• Adjustable by PC
• Supply: 9...30 VDC
• Calibration certificate included

Temperature and standard signal transducer P30U.

• Programmable input
• Mathematical functions
• Individual channel characteristic
• 1 or 2 outputs
• Variant with internal transducer 24 VDC power supply
• RS-485 interface
• Adjustable dimension
• Data logging into internal memory (4 MB) or SD/SDHC card (4 GB)
• Transducer programming with buttons or via PC (“LPConfig” software)

• Selectable double set point
• Selectable TC / Pt100 input (order option)
• Output: relay (control or alarm) and SSR (control)
• PID control
• Self-tuning feature
• Soft-start function
• Offset feature for input
• Heating/cooling control
• Manual control feature

• Two set points
• Input: TC (J, K, T, R, S) / RTD (Pt100)
• Control output: relay or SSR
• Auxiliary output: relay
• PID / ON-OFF control
• Auto-Tuning / Self-Tuning
• Alarm modes: deviation, absolute
• Heating / cooling control
• 4+4 digits high contrast LED display
• Supply: 85…270V AC / DC
• Ambient temperature: 0…50 °C

• Indoor temperature controller of TR series (S+S Regeltechnik, Germany)
• TR-040 (external setting): 0...40 °C
• TR-040U (internal setting): 0...40 °C
• TR-060 (external setting): 0...60 °C
• TR-060U (internal setting): 0...60 °C
• Output: Relay
• Switching capacity: 24...250 VAC (16 A)
• Ambient temperature: -35...65 °C
• Protection class: IP65

• TR series indoor thermostat with two temperature settings.TR-04040 (external setting)
• TR-04040 (external setting): 0...40 °C/0...40 °C
• TR-04040U (internal setting): 0...40 °C
• TR-060 (external setting): 0...60 °C
• TR-060U (internal setting): 0...60 °C
• Output: Switch
• Switching voltage / current: 24...250 V, 16 A AC
• Ambient temperature: -35...65 °C 
• Protection class: IP65

• Temperature measurement range: -90...+260 °C
• Accuracy: ±0.2 °C (±0,2 %, when temperature is in range of +100...+260 °C)
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: 1 s...24 h
• Local alarms via LED indication, on LCD screen and acoustically by built-in beeper
• Data can be transferred to PC via USB-C interface
• Calibration certificate included
• Ambient temperature: -30...+70 °C
• Supply: lithium ion 3,6 V AA battery
• Protection class: IP67
• Warranty: 3 years

• Inputs: 4 x Pt1000
• Temperature measurement range: -90...+260 °C
• Accuracy: ±0.2 °C (±0,2 %, when temperature is in range of +100...+260 °C)
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: 1 s...24 h
• Local alarms via LED indication, on LCD screen and acoustically by built-in beeper
• Data can be transferred to PC via USB-C interface
• Calibration certificate included
• Ambient temperature: -20...+60 °C
• Supply: lithium ion 3,6 V AA battery
• Protection class: IP67
• Warranty: 3 years

• Input: 4x external Pt100 sensors
• Measuring range: -200…+260 °C
• Accuracy: ± 0.2 °C (± 0,2 %, when temperature is in range of +100...+260 °C)
• Resolution: 0,1 °C
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: adjustable 1 s...24 h
• Local alarms via LED indication, on LCD screen and acoustically by built-in beeper
• Data can be transferred to PC via USB-C interface
• Calibration certificate included
• Ambient temperature: -20...+70 °C
• Supply: lithium ion 3,6 V AA battery
• Protection class: IP20
• Warranty: 3 years

• Inputs: 4x external sensors + 1x internal temperature sensor
• 3x Thermocouple type B, J, N, S, T external temperature sensor
  • Measuring range: according to the connected thermocouple
  • Accuracy: ± 0,4 °C
  • Resolution: 0,1 °C
• 1x PT1000 external temperature sensor
  • Measurement range: -200...+260 °C
  • Accuracy: ± 0.2 °C (± 0,2 %, when temperature is in range of +100...+260 °C)
  • Resolution: 0,1°C
• Internal temperature sensor
  • Measuring range: -30…+70 °C
  • Accuracy: ± 0,4 °C
  • Resolution: 0,1 °C
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: adjustable 1 s...24 h
• Local alarms via LED indication, on LCD screen and acoustically by built-in beeper
• Data can be transferred to PC via USB-C interface
• Calibration certificate included
• Ambient temperature: -20...+70 °C
• Supply: lithium ion 3,6 V AA battery
• Protection class: IP20
• Warranty: 3 years