Temperature switches

• Air velocity measurement range: 0...2 / 0...10 / 0...20 m/s (selectable via jumper)
• Temperature measurement range: 0...50 °C
• Output: 0...10 V / 4...20 mA
• Option: LCD screen
• Option: relay output
• Supply: 24 VDC/VAC
• Operating temperature: 0...+50°C
• Protection class: IP54

• Compact thermostat for shipbuilding
• ISP version – with capillary tube, ISPT version – without capillary tube
• Measured temperature from +5...95 °C to +20...150 °C
• Switching differential: not adjustable
• Output signal: floating change-over contact
• Ambient temperature: -30...+70 °C
• Conformity: ABS, BV, CCS, DNV, GL, KRS, LRS, NKK, RINA, RMRS, EN60730-1 / EN60730-2-9: Typ 2.B.H

• Grain temperature monitoring system for steel and concrete bins
• Digital sensors with 2-wire bus
• Sensor spacing: 2 or 3 m
• Diameter: Ø9,8 mm
• Length: 1...35 m
• Tensile strength: ≤ 2,5 t
• Operating temperature -20...50 °C
• Maximal surface temperature 85 °C
• System is ATEX-, IECEx- and GOST-R approved
• ATEX approval code: Ex II 1D Ex ia IIIC T85°C

• Grain temperature monitoring system for steel and concrete bins
• Digital sensors with 2-wire bus
• Sensor spacing: 2 or 3 m
• Diameter: Ø17 mm
• Length: 1...100 m
• Tensile strength: ≤ 8 t
• Operating temperature -20...50 °C
• Maximal surface temperature 85 °C
• System is ATEX-, IECEx- and GOST-R approved
• ATEX approval code: Ex II 1D Ex ia IIIC T85°C

• Temperature measurement range:
  a) Ambient model: -20...+80 °C
  b) Remote model with polycarbonate probe: -20...+80 °C
  c) Remote model with stainless steel probe: -40...180 °C
• Relative humidity measurement range: 0...100 %
• Calculates dew point, absolute humidity, enthalpy and combination ratio
• 4-wire analog output: 0...5/10 V or 0/4...20 mA
• 2 relay outputs
• Versions with or without display
• Protection class: IP65 (ABS V0 housing)

Room thermostat, temperature switch with an electric socket RTBSB-001.401.

• Flexible spears for grain temperature measurement
• Rigid construction
• Diameter: Ø8 mm
• Penetration depth: up to 12 m
• Digital temperature sensor
• Measurements are done using PC software or handheld reader GW-200
• Temperature spears and cables can be integrated into single system

• Measures ambient air temperature and humidity
• Integrates seamlessly into GrainWatch PC Software and displays the ambient weather conditions in real-time

• Indoor temperature controller of TR series (S+S Regeltechnik, Germany)
• TR-040 (external setting): 0...40 °C
• TR-040U (internal setting): 0...40 °C
• TR-060 (external setting): 0...60 °C
• TR-060U (internal setting): 0...60 °C
• Output: Relay
• Switching capacity: 24...250 VAC (16 A)
• Ambient temperature: -35...65 °C
• Protection class: IP65

• TR series indoor thermostat with two temperature settings.TR-04040 (external setting)
• TR-04040 (external setting): 0...40 °C/0...40 °C
• TR-04040U (internal setting): 0...40 °C
• TR-060 (external setting): 0...60 °C
• TR-060U (internal setting): 0...60 °C
• Output: Switch
• Switching voltage / current: 24...250 V, 16 A AC
• Ambient temperature: -35...65 °C 
• Protection class: IP65

• Industrial temperature protectors (temperature switches) TS-M, TS-B, TS-1, TS-4, designed for temperature control
• Temperature switch is designed to control when set temperature is reached
• Depending on type, after cooling about 30±15K from base temperature, the temperature switch returns to initial state

• Temperature range: from +20...+110 °C iki +40...+300 °C
• Output signal: 1 floating change-over contact
• Process temperature: +20...+300 °C
• Approval: ABS, BV, CCS, DNV, GL, KRS, LRS, RINA, RMRS, EN60730-1/ EN60730-2-9: Typ 2.B.H
• Protection class: IP65

• Input: RTD: Pt100 (2-wire) / TC: K
• Output: relay (NC/NO)
• Configuration: via HART (switching point, hysteresis, switching delay, damping), with magnet (switching point)
• Operating temperature: -20...+80 °C
• Supply 24 VDC

• Flow and temperature sensor for liquids in pipes
• Output: 1 x 4...20 mA, 1 x PNP / 2 x PNP
• Flow measurement range: 1...150 cm/s (water)
• Temperature measurement switching points: 15, 30, 45, 60, 75 °C
• Flow rate measurement is shown in a bar graph by five green LEDs
• Settings provided by magnetic pen
• Stainless steel case
• Supply: 12...34 VDC
• Ambient temperature: -20...+80 °C
• Protection class: IP67 / IP68

• Thermocouple commutatotr TK with cold junction compensation for thermocouple measurement output (in turns) to one output
• Connecting that output to measuring device or indicator enables the monitoring of thermocouples in turns

Temperature relay, mechanical thermostat ATR83 with pipe-mounting for temperature control.

Temperature relay, mechanical thermostat JTF-1 for frost protection.

• RTKSA series thermostat have cooling or / and heating functions
• Temperature control range: -10, 0, 20, 30, …50, 110, 120, 150 °C
• Two-way switching contact
• Number of outputs: up to 4
• Number of control ranges: up to 2
• Sensor element: capillary tube
• Capillary tube length: up to 12 m
• Maximum switching voltage: 230 V AC 50 / 60 Hz, 230 V DC
• Maximum switching current: NC: 16 (2.5) A; NO: 6.3 (2.5) A, 0,25 ADC
• Minimum switching voltage: 24 V AC / 50 Hz, 24 V DC
• Universal mounting
• Ambient temperature for head: up to 80 °C
• Protection class: up to IP65
• Safety and EMC: in accordance DIN EN 60730