Indicators

2, 3 or 4 axes ADR10 series indicators for digital systems, linear displacement measurements, movement measurements, positioning detection. These indicators are used with optical and magnetic linear encoder scales ALS or MLS. Error compensation.

Application:

• Lathes
• Milling machines
• Plate metal processing mills
• Grinding machines
• Erosion machines
• Mechanical processing centers

Recorder HT20 is designed for measurement and logging of ambient humidity and temperature.

• Especially suitable for server rooms, pharmaceutical and food warehouses, laboratories, museums and greenhouses
• Logged data is stored in the internal memory and then sent digitally to the user (over Ethernet)
• Alarms are formed by e-mails, on the webserver, using symbols on screen or via audible alarms
• HT20 can be powered by the Ethernet network (PoE – Power over Ethernet), additionally ordered
• FTP, DHCP, SMT, Modbus TCP/IP protocols

• The MQTT protocol is ideal for communication in distributed acquisition systems data (IoT applications)
• Especially suitable for server rooms, pharmaceutical and food warehouses, laboratories, museums and greenhouses
• Logged data is stored in the internal memory and then sent digitally to the user (over Ethernet)
• Alarms are formed by e-mails, on the webserver, using symbols on screen or via audible alarms
• HT20IoT can be powered by the Ethernet network (PoE – Power over Ethernet), additionally ordered
• FTP, DHCP, SMT, Modbus TCP/IP protocols

• Input:
  • temperature:
    • resistance thermometers: Pt100, Pt500, Pt1000
    • thermocouples: J, K, N, E, R, S
  • resistance: 400 ohm, 4000 ohm
  • current: ± 20 mA
  • voltage: 0…10 V, -10…60 mV
• Output: relay (4), analog (1), digital RS-485/MODBUS (1),
• Three-colour display - red, green and orange, programmable in three intervals of the measured value – facilitates the observation of measured value changes.
  • digit height: 14 mm
  • highlighted measuring unit
• Four alarm outputs with signaling on LED diodes operating in six different modes.

• Digital pulse counter - tachometer ECH4400
• Count inputs: 2 channels (max 50 kHz, 5…30 V pulses), can be selected as PNP or NPN input
• Counting frequency: (20, 50, 100, 500, 1000, 5000) Hz, (10, 20, 30, 40) kHz
• Control outputs: 2 relay NO / NC 250 V, 2 A
• SSR outputs: Open collector output (Max.: 30 VDC, 50 mA)
• RS485 Modbus communication interface (custom ordered)
• Power supply: 90…250 V AC; 10…30 V DC; 8…24 V AC (custom ordered)
• Auxiliary supply output: 12 VDC, max 50 mA
• Ambient temperature: 0…+50 °C
• Case protection: front panel IP65, rear panel IP20

• Universal input (for standard signals and temperature sensors)
• Alarm output
• OLED display
• Configuration via miniUSB connector
• Supply: 24 VDC or 230 VDC / VAC
• IP65 protection class

Digital, programmable indicator N30H for DC voltage, current, with RS-485 interface.

• Device is designed for DC (bi-polar) voltage, current measurement
• LED indicator colors: red, green, yellow (for 3 input value ranges)
• Device is programmed with buttons or via RS-485 port
• 4 alarm inputs in 6 modes
• Measurement value conversion into analog signal 0/4...20 mA arba 0...10 V
• Minimal and maximal value storing for all measurements

• Universal input for measuring temperature, resistance and standard signal
• 4 alarm outputs with signaling on LED diodes
• Digital output: RS-485 modbus (can be programmed through RS-485)
• Analog signal output: 0/4...20 mA or 0...10 V
• Two-line LCD display
• Mathematical functions for converting the measured value
• Protection grade: frontal side – IP65 / from terminal side – IP10
• Operating temperature: -25...23...55 °C

Digital programmable indicator N20 for temperature, DC voltage and current measurement. Measures J, K, Pt100 temperature sensors’ signals.

Programmable parameters:

• LED indicator color, which changes depending on input signal value: green, yellow and red
• Value limits
• Measurement unit indication
• Cold junction compensation (CJC)
• Compensation for Pt100 sensors
• Averaging time
• Individual characteristic
• 2 OC alarms in 6 modes

Digital programmable indicator N20Z for AC voltage, current and frequency measurement.

Programmable parameters:

• LED indicator color, which changes depending on input signal value: green, yellow and red
• Value limits
• Measurement unit indication
• Decimal point location
• Measured signal
• Averaging time
• Individual characteristic
• 2 OC alarms in 6 modes

Digital programmable indicator N24 for temperature, AC/DC voltage and current measurement. Measures J, K, Pt100 temperature sensors signals.

Programmable parameters:

• Value limits
• Decimal point place
• Measurement unit indication
• Cold junction compensation (CJC)
• Compensation for Pt100 sensors
• Averaging time
• Individual characteristic

• Universal input for standard signals and temperature sensors
• 14 mm height 5-symbol LED display
• 24 VDC output supply for other devices
• IP65 front protection class
• Operating temperature: -10...55 °C

Digital programmable indicator N30B with data logging function and RS-485 interface.

• LED indicator colors: red, green, yellow (for 3 input value ranges)
• Internal memory (up to 350064 records)
• Memory expansion up to 4 GB using a MMC/SC memory card
• RTC (real time clock) – with automatic time change
• Autonomic supply

• Digital, programmable pulse, frequency, motor revolutions, work time meter N30O with RS-485 interface
• Programmable with keys or via computer

• Digital, programmable power network parameter meter N30P with RS-485 interface
• Measures voltage, current, frequency, active, reactive power, cosφ, tgφ, energy consumption
• Programmable with keys or via computer

• Voltage measurement ± 600 V, current measurement via shunt, power, energy and capacity measurement of d.c. circuits
• 4 alarm outputs with signaling on led diodes, working in 7 different modes
• Analog outputs: 0/4...20 mA or 0...10 V
• Digital output: RS-485 / MODBUS RTU
• Two-line LCD display
• Protection grade: frontal side – IP65 / from terminal side – IP10
• Operating temperature: -25...23...55 °C

N19Z meter measures AC voltage and current. The meter is designed to work in 3-phase networks or 1-phase networks.

• Nominal input voltage: 300 or 600 V 1 phase / 100…500 V 3 phase
• Nominal input current: 1A or 5A
• True RMS measurement (up to 15th Harmonic)
• On site programmable PT/CT ratios
• User selectable 3ph3wire or 3ph4wire Network (for 3ph)
• Onsite selection of Auto scroll / Fixed Screen (for 3ph)
• 4 Digits 14mm ultra bright LED Display
• Protection: IP54 front / IP20 back
• Parameter Screen recall: In case of power failure, the instrument memorizes the last displayed screen
• Accuracy: ±0.5% of nominal value

• Inputs: Pt100, Pt1000, 0…4000 Ω, TC (E, J, K, N, R, S), -75…310 mV, -10…10 V, -24…24 mA, potentiometer
• Relay output: 1 x NO contact, load-carrying capacity 6A / 250 V AC.; 6A / 30V DC
• Digital output: RS-485 / MODBUS RTU
• Auxiliary supply: 24 V DC / 24 mA
• Mathematical functions for converting the measured value
• Two-line LCD display (1-row 6 digits, 2-row 5 digits)
• Protection grade: frontal side – IP65 / from terminal side – IP10
• Operating temperature: -20...23...60 °C
• Power supply: 40… 253 VAC / 20…300 V D

Digital meters – bargraphs NA3, NA5, NA6,measurement of DC voltage, current, resistance and temperature measurement (with thermal sensors J, K, N, E, R, S, T, Pt100, Pt500, Pt1000).

• Digital input: 4 ch. pulse
• Independent modes: OPEN / CLOSED (“Dry contact”) and COUNTER (S0 standard)
• Output: RS-485 MODBUS RTU interface
• Non-volatile memory for counters storage and settings
• Galvanically isolated inputs
• DIN rail mounting
• Protection class: IP40 (connections IP20)
• Operating temperature range: -20…+60 °C
• Power supply: 5…28 VDC

• Self-operating signal lamps (optic signaling of AC/DC voltage presence in 1-phase network via lighting of one non-replaceable LED)
• LED colors: green, red, yellow
• Cover - modular, width 17,5 mm
• Direct mounting on 35 mm rail mount acc. to EN 60715
• Applications: in low-voltage systems (130…260 V)
• Compliance with standards: EN 62094-1, EN 61000-4-2, 3, 4, 5, 6, 11
• Recognitions, certifications, directives: RoHS, CE, EAC, UKCA

• Inputs: Pt100, thermocouples J, K
• 4-digit 20 mm LED screen
• Automatic or manual compensation
• Programmable input, decimal point, averaging time
• 24 VDC output for external transducers
• Galvanic isolation
• Supply: 230 VAC / 240 VAC / 20...40 VAC / 20...40 VDC
• Protection class: IP65

• Temperature indicator TI-N20, TI-N24 for temperature measurement from -30 to +800 °C
• Various temperature sensor construction types are available

• Temperature indicator TI-N20/5, TI-N24/5 for temperature indication
• Various temperature sensor constructions are available: Pt100, Pt1000; NTC, PTC, termopora K, J

• Three-color numerical display DL21 is designed to indicate various parameters (temperature, humidity, etc.) from external devices via RS-485
• Can be used in offices, industrial and communal buildings
• Indicator color is programmable (green, red and yellow)
• Programming is done via RS-485 port
• Can work in master and slave modes

• Self-operating signal lamps (optic signaling of AC/DC voltage presence in 3-phase network – 3(N) 400 / 230 V via lighting of one non-replaceable LED)
• LED colors: green, red, (red, yellow, green)
• Cover - modular, width 17,5 mm
• Direct mounting on 35 mm rail mount acc. to EN 60715
• Applications: in low-voltage systems (400 / 230 V)
• Compliance with standards: EN 62094-1, EN 61000-4-2, 3, 4, 5, 6, 11
• Recognitions, certifications, directives: RoHS, CE, EAC, UKCA

The RE4X series controllers have a wide range of process control options and versions. Programmable inputs for standard signals, signal difference measurement between channels, control algorithms ON / OFF, PID, soft start and Fuzzy logic. Remote control with SCADA system through RS-485. The required output types can be selected during ordering (relays, SSR, analog).

Main features:

• Sampling rate (5 times / second)
• 1 input: TC and RTD sensors; standard signals 0 / 4…20 mA and 0…10 V
• 2 input: 0 / 4…20 mA and 0…10 V
• Binary input for changing the function of the controller and SP switching
• Outputs: relays - NO, SSR; analog - 0 / 4…20 mA and 0…10 V
• Galvanically isolated transducer and sensors power supply 24 V d.c. 25 mA
• Programmable digital filter
• Hardware and software security before changing settings
• Alarm for breaking the control loop
• Supply: 90…264 V a.c. or 11…26 V a.c. / d.c.
• Protection class: IP65

• Input (single option): 100 V, 250 V, 400 V, 1 A, 5 A, 20...500 Hz
• Digital output: RS-485 (Modbus RTU)
• Relay outputs: 2x OC
• Display: 3-color LED, 5-digit
• Galvanic isolation
• Supply: 85...253 VAC/VDC / 20...40/60 VAC/VDC
• Protection class: IP65

• Input (single option): 0...100 V, ±100 V, 0...400 V, ±400 V
• Digital output: RS-485 (Modbus RTU)
• Relay outputs: 2x OC
• Display: 3-color LED, 5-digit
• Galvanic isolation
• Supply: 85...253 VAC/VDC / 20...40 VAC/VDC
• Protection class: IP65

• Input (single option): Pt100, J, K, 0...20 mA, 4...20 mA, ±20 mA, 0...75 mV, 0...10 V, ±10 V, 0...150 mV, ±75 mV, V150 mV
• Voltage measurement range: 0...75 mV; 0...150 mV; 0...10 V (DC)
• Current measurement range: 0/4...20 mA; ±20 mA (DC)
• Temperature measurement range: -50...400 °C (Pt100); -50...1200 °C (J) / -50...1370 °C (K)
• Digital output: RS-485 (Modbus RTU)
• Relay outputs: 2x OC
• Auxiliary 24 VDC output to supply transducers
• Display: 3-color LED, 5-digit
• Temperature compensation
• Galvanic isolation
• Supply: 85...253 VAC/VDC / 20...40 VAC/VDC
• Protection class: IP65