Поиск

• Rated load: 20...10 000 kg (chosen from list)
• Output: 2 mV/V
• Connection: 3 / 6 m cable, 4-wire
• Operating temperature: -35...+65 °C
• Supply: 10 VDC
• Protection class: IP66 / IP67

За дополнительную стоимость: два аналоговых выхода (0...10V, 4...20mA), мембранный фильтр, тефлоновый фильтр, бронзовый фильтр.

Датчик измеренные параметры преображает на аналоговый или цифровой сигнал.

Датчик относительной влажности и температуры P18L питаемый от токовой петли.

• Питается от токовой петли (не требуется внешнее питание)
• Датчик преобразовывает измеренные параметры на аналоговый сигнал.

Temperature and air humidity transducer P19 with RS-485 output, designed for room humidity ant temperature contro. Can be used in various control and monitoring systems. Output signal is digital (RS-485, MODBUS). Transducer parameters are programmed via PC. Wall-mounted. Can work in condensation-free environment.

• Integrated temperature and humidity sensor
• Calculated values – dew point temperature, absolute humidity
• Minimal and maximal value memory
• Isolated RS-485 port

Relative humidity and temperature transducer P18D with display and RS-485 output, designed for temperature and humidity measurement.

• Temperature sensor MWTF is designed to measure the average temperature (S+S Regeltechnik, Germany)
• Range: -30...80 °C
• Measuring capillary: Ø5 mm, L=0.4 m / 3 m / 6 m / up to 20 m
• Capillary material: Copper, plastic-coated
• Protection class: IP65

• Temperature sensor AUREGIS TJ-1-TE for temperature measurement from -40°C to 105°C
• Water-resistant – protection class IP68, fully cast in thermoplastic rubber
• Good properties in extreme freezing-melting conditions

• Датчик температуры AUREGIS ТJ-2 с минеральной изоляцией
• Предназначен для измерения температуры в диапазоне -50°C до 400°C - RTD датчикам Pt100, Pt1000 и от -50 °C до 1150 °C - термопарам
• Возможны исполнения по требованиям заказчика

• Temperature sensor TJ-B with pipe mounting
• Measuring range: -30 to 180, 250, 400°C
• Sensor type: RTD (Pt100, Pt1000), TC (K, J)
• Accuracy: A or B class / cl. 2
• Output: RTD (Pt100, Pt1000), TC (K, J), 4...20 mA, 4...20 mA +HART, 0...10 V, RS-485, IO-LINK
• Measuring part: Plate by pipe
  • Material: Stainless steel AISI304 (1.4301) 
• Connection head
  • Type: B
  • Protection class: IP65
• Extension tube
  • Material: Stainless steel AISI304 (1.4301) 
  • Diameter: Ø 10 mm
  • Length: 10; 50 mm, or according to request
• Straps: 2 pcs., not included
• Probe for process tube: Ø 15 - 40 mm

• Temperature sensor AUREGIS TJ-DIN for temperature measurement
• 35 mm DIN rail mounting
• Measuring range: -50...+70°C

• Sensor: Pt100 / Pt1000 / 2x Pt100 / 2x Pt1000, 2 / 3 / 4-wire
• Output: 4..20 mA HART / RTD / CANopen
• Measurement range: -50...+400 °C
• Configuration: via HART
• Fitting length: 50...1000 mm
• Process connection: G1/2”, hygienic
• Operating temperature: -20...+80 °C / -30...+100 °C
• Supply: 12...40 VDC (HART), 8...40 VDC (CANopen)
• Protection class: IP65

• Sensor: Pt100 (3-wire) / TC: K (with display / without display)
• Output: HART / sensor output
• Measurement range: -50...+400 °C
• Configuration: via HART
• Operating temperature: -20...+80 °C / -30...+100 °C
• Various connection options
• Supply: 12...40 VDC (HART), CR2032 (for screen)
• Protection class: IP65

• Sensor type: Pt100, Pt1000, Ni100, Ni1000, others
• Electrical connection:
  • A transmitters with output: 4…20 mA, 4...20 mA +HART, 0…10 V, RS-485 or IO-LINK
  • 2-wire, 3-wire, a contact terminal
• Measuring range: -40…80 °C
• Operating temperature: -40…80 °C
• The sensor can be distanced, meaning the TJ-O can be equipped with the following external temperature sensors: TJ-1, TJ-2, TJ-4, TJ-S
• Sensor tube:
  • Material: Stainless steel AISI304 (1.4301)
  • Diameter: Ø6 mm
  • Length: 25 mm
• Mounting box:
  • Material: Polystyrene
  • Dimentions: 64,4x 88,4x 42,2mm
  • Protection class: IP65
• The design could be changed according the requirements and drawings of the customer

• The temperature sensor TJ-PL12 is designed for measuring temperature ranging from -50°C to 400°C
• The design could be changed according the requirements and drawings of the customer
• Measuring range: -50°C ... 400°C

• Датчик температуры ТJ-S с соединительным кабелем. Предназначен для измерения температуры в диапазоне -50°C до 400°C.
• Возможны исполнения по требованиям заказчика
• Тип сенсора: PT100, PT1000, K, J

• Temperature sensor TJ-S (with cable, angled), designed for temperature measurement from -25 to +180 °C
• Various versions are available we also produce sensors according to client’s requests
• Sensor type:  Pt100, Pt1000, K, J, PTC, NTC

• The temperature sensor TJ1-TTP is inextricably connected to the cable, it is designed for measuring the temperature ranging from -30 °C to 400 °C
• Various sizes are available depending on customer requirements and drawings
• Sensor type: termocouple K, J

Devices of SPECTRO-3 series are designed to detect “true-color” (human color reception). Sensors can be used in AC or DC modes, with internal or external light source.

Special purpose temperature sensors (AUREGIS)

Fluid level electrode probes SKC-201, designed to control conductive fluid level in open and pressure tanks. Electrodes – rod or flexible (rope with plastic coating). Probe head is made of acid-resistant steel. Maximal electrode count – 3. Insulation is made out of high quality plastic, enabling the probe to be used in food industry. Standard version probes are coated with plastic (FEP, PU, PVDF), lowering the residue collection (slime, carbonate, foam, etc.). Two modifications are available – with connection cable (P) and connector (G).

• Stable long-life electrochemical gas sensor
• Range 0...5 ppm O₃
• Resolution 0,03 % ppm O₃
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor

• Stable long-life metal-oxide gas sensor
• Range 0....1000 ppm NH₃
• Resolution 1 ppm NH₃
• Default alarms at 25 ppm / 35 ppm NH₃
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485

• Electrochemical gas sensor
• Range: 0...100, 0...300, 0...1000, (0...10000 on request) ppm NH3
• Resolution: 1 / 2 / 5 ppm NH3
• Sensor lifetime: > 2 years
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -10...+50 °C
• Supply: 11..30 VDC / 24 VAC or 90...265 VAC

• Metal-oxide gas sensor
• Range: 0...1000 ppm NH3
• Resolution: 1 ppm NH3
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+50 °C / 15...90 %RH
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• NDIR gas sensor
• Range: 0...50 000 ppm CO2 (up to 100 % CO2 on request)
• Resolution: 0.01 % vol.
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -25…+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Electrochemical (CO) and optical NDIR (CO2) gas sensors
• Range: 0...100 ppm CO, 0...10000 ppm CO₂
• Resolution: 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Operating temperature: -20...+50 °C
• Supply: 24 VDC/VAC
• Protection class: IP65

• Electrochemical gas sensors
• Range: 0...100 ppm CO, 0...20 ppm NO₂
• Resolution: 1 ppm CO, 0,1 NO₂
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Operating temperature: -20...+50 °C
• Supply: 24 VDC/VAC
• Protection class: IP65

• Photo ionization detector
• Detected vapors: acetone, ethanol, toluene, xylene, etc.
• Standard calibration: isobutylene
• Range: 0...40 / 0...200 ppm (isobutylene)
• Resolution: 1 / 1 ppb
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+65 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Metal-oxide gas sensor
• Detected vapors: acetone, ethanol, toluene, xylene, etc.
• Standard calibration: toluene
• Range: 0...100 % LEL (flammable range) / 0...1000 ppm (toxic range)
• Resolution: 0,1 % LEL / 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+70 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Stable long-life electrochemical gas sensor
• Range 0...5 ppm O₃
• Resolution 0,03 % ppm O₃
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 0,3 / 1 ppm O₃
• Attached or remote sensor

• Electrochemical gas sensor
• Range: 0...5 ppm O₃
• Resolution: 0,01 ppm O₃
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

Differential manometer MM for air and non-aggressive gasses, designed for pressure measurement in narrow ranges.

• Range: -100…1500 Pa
• Operating temperature: -40… +60°C

Capacitive level sensor Reka 2000 is designed to be submerged into liquids, made out of non-toxic polypropylene (PP)

Capacitive oil level sensor PWP-420.60, designed for oil, liquid fuel, food oil and other fluid level control in metal and nonmetal tanks. Special sensor versions are suited for work in aggressive fluid mediums (acids, alkalis).

CLM-36 are designed for continuous level measurement of liquids and bulk-solid materials. Mounted directly in containers, tanks, etc. Indicator LDU-410 can be mounted on head. Can be used in high temperature and explosive atmospheres. Current (4...20 mA) or voltage (0...10 V) output.

Digital meters – bargraphs NA3, NA5, NA6,measurement of DC voltage, current, resistance and temperature measurement (with thermal sensors J, K, N, E, R, S, T, Pt100, Pt500, Pt1000).

Digital programmable indicator N20Z for AC voltage, current and frequency measurement.

Programmable parameters:

• LED indicator color, which changes depending on input signal value: green, yellow and red
• Value limits
• Measurement unit indication
• Decimal point location
• Measured signal
• Averaging time
• Individual characteristic
• 2 OC alarms in 6 modes

Digital programmable indicator N24 for temperature, AC/DC voltage and current measurement. Measures J, K, Pt100 temperature sensors signals.

Programmable parameters:

• Value limits
• Decimal point place
• Measurement unit indication
• Cold junction compensation (CJC)
• Compensation for Pt100 sensors
• Averaging time
• Individual characteristic

• Universal input for standard signals and temperature sensors
• 14 mm height 5-symbol LED display
• 24 VDC output supply for other devices
• IP65 front protection class
• Operating temperature: -10...55 °C

Digital, programmable indicator N30H for DC voltage, current, with RS-485 interface.

• Device is designed for DC (bi-polar) voltage, current measurement
• LED indicator colors: red, green, yellow (for 3 input value ranges)
• Device is programmed with buttons or via RS-485 port
• 4 alarm inputs in 6 modes
• Measurement value conversion into analog signal 0/4...20 mA arba 0...10 V
• Minimal and maximal value storing for all measurements

• Digital, programmable pulse, frequency, motor revolutions, work time meter N30O with RS-485 interface
• Programmable with keys or via computer

• Input:
  • temperature:
    • resistance thermometers: Pt100, Pt500, Pt1000
    • thermocouples: J, K, N, E, R, S
  • resistance: 400 ohm, 4000 ohm
  • current: ± 20 mA
  • voltage: 0…10 V, -10…60 mV
• Output: relay (4), analog (1), digital RS-485/MODBUS (1),
• Three-colour display - red, green and orange, programmable in three intervals of the measured value – facilitates the observation of measured value changes.
  • digit height: 14 mm
  • highlighted measuring unit
• Four alarm outputs with signaling on LED diodes operating in six different modes.

• RDM-3P предназначен для измерения влажности бумаги
• Три шкалы:
  • 5,3 ... 23% для бумаги
  • 8 ... 40% для оберточной бумаги
  • 0 ... 100% произвольный масштаб для получения относительной влажности для других материалов
• Яркий цифровой дисплей
• Встроенная проверка калибровки
• Звуковой, регулируемый будильник
• Встроенные контактные штыри, установленные сверху измерителя, обеспечивают проникновение 8 мм
• Встроенный разъем принимает любой электрод Delmhorst
• Автоматическое отключение таймера позволяет продлить срок службы батареи
• Хранение до 1400 показаний с отметкой даты и времени
• Просмотр и упорядочение сохраненных показаний на экране
• Дополнительное программное обеспечение позволяет загружать показания к вашим вычислениям и создавать отчеты Excel
• Рабочая температура: -20...70 °C
• Размер: 215 x 85 x 45 mm
• Вес: 312 g
• Прочная конструкция обеспечивает годы надежного использования
• Прочный пластмассовый футляр
• Питание: 9 V батарея
• 1 год гарантии

• Hammer wood moisture meter HIT-1 (needle), designed for moisture measurement from 6 to 50 %
• Moisture measurement method: resistive
• Range: 6...50 %

• Range: 6...60 %
• Step value: 0,1 %
• Temperature compensation (-10...+60 °C)
• Many wood types (12 common and 270 exotic)
• Replaceable needles made of high quality steel
• Display: LCD
• Chromium plated steel body
• Supply: 12 V battery (approx. 5000 measurements)

• Wood moisture meter MICRO+, designed for moisture measurement from 6 to 60 %
• Automatic turn-off
• Battery low warning
• Water-resistant

• Диапазон влажности: 5% -60%.
• 69 видов древесины.
• память измерения 1400.
• Передача данных измерений в отчеты по ПК и Excel.
• Звуковой сигнал при превышении лимита.
• Разъем для измерительных электродов Delmhorst.
• Питание: 9 V батарея.

• Диапазон влажности:
• Древесина - 5% - 30%.
• Прочие строительные материалы - 0 - 100%.
• Коррекция измерений в соответствии с плотностью древесины.
• Проникновение сигнала измерения - 19-25 мм.
• Питание: 9 V батарея.

• G-7 is designed for moisture measurement of grain
• Moisture measurement range: 9...30 %, depends on grain type
• Built-in calibrations for barley, coffee, corn, flax, hay, oats, pasta, rapeseed, rough rice, rye, sorghum, soybeans and wheat
• Built-in temperature correction over the range of 0...70 °C
• Programmable offset to match elevator
• Stores up to 150 accumulated readings in user-defined batches by grain
• Displays the average and highest readings, standard deviation, co-efficient of variance oh stored readings
• Built-in connector accepts any Delmhorst electrode
• Built-in calibration check
• Audible, adjustable alarm
• Size: 180 x 150 x 140 mm
• Weight: 1800 g
• Rugged construction ensures years of reliable use
• Supply: 9 V battery
• 1-year warranty