Controllers, regulators

• Universal input (for standard signals and temperature sensors)
• Alarm output
• OLED display
• Configuration via miniUSB connector
• Supply: 24 VDC or 230 VDC / VAC
• IP65 protection class

• Input: 0...20 mA, 4...20 mA, 0...1 V, 0...10 V
• Display: 4 digits (value range: -1999...4000)
• Measurement unit can be displayed
• Option: 2 x relay output for control and alarm
• Option: sensor supply output
• Option: RS-485 Modbus RTU interface
• Manual calibration
• Stores maximum and minimum measurement values
• Operating temperature: 0...50 °C
• Supply: 230/110 VAC / 12/24 VAC / 9...30 VDC / 7...24 VAC

Industrial IoT module TCW242 for remote real-time monitoring and control of industrial equipment, facilities, production lines, renewable energy systems, greenhouses and water stations

• Web-based configuration and control with password protection
• 4 digital inputs for dry contacts
• 4 analog inputs with 0-10V and 0-20mA options
• 4 relays with normally open/normally closed contacts
• RS-485 interface for MODBUS RTU sensors. Up to 24 sensors (registers)
• Monitor up to 24 channels
• Set up to 24 independent alarms
• SNMPv3 protocol support
• Alarm notifications via SNMP traps
• NTP protocol support
• HTTP API commands
• 4 schedules for real-time control of relay outputs
• Custom logical functions
• Secured email transfer with TLS 1.0, TLS 1.1, and TLS 1.2 support
• Data logging capacity for up to 70,000 records
• Dynamic DNS support for DynDNS, No-IP, and DNS-O-Matic providers
• Periodical HTTP / HTTPS Post of XML / JSON status files for client-server systems
• MODBUS TCP / IP protocol support
• MQTT 3.1.1 protocol support
• Rugged DIN-Rail / wall-mountable enclosure
• Operating temperature range: -20…+55 °C

• Ethernet connection
• Digital inputs: 2
• 1-Wire input (up to 2 sensors)
• Analog inputs: 2 (0...60 VDC)
• Relay outputs: 2 (NO/NC)
• IP watchdog function
• Webserver
• SNMP alarms
• VLAN and MAC address filtering
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...14 VDC

• Adjustable start time delay: 0...16 s
• Operating resistance: 0...100 kΩ
• Mounting on DIN rail
• Operating temperature: -10...50 °C
• Supply: 117/230/400 VAC
• Protection class: IP20

• Three versions by sensitivity: NS (standard), AS (high), SR (adjustable)
• Operating resistance: 5,6 kΩ (NS) 70 kΩ (AS) 0...100 kΩ (SR)
• Mounting on DIN rail
• Operating temperature: -10...50 °C
• Supply: 117/230/400 VAC
• Protection class: IP20

• Input: standard 4...20 mA signal or capacitive Labkotec 3W probe
• Current output: 0/4...20 mA
• Switch outputs: 2 units
• LCD display
• Programmable using buttons
• ATEX certified
• Wall-mounted, IP65
• Supply: 230 VAC, 50/60 Hz

• High level detection
• Oil on water surface detection
• Sludge under water detection
• Designed for usage in separators, basins and tanks
• Version with GSM module available – for alarms and service reminders
• Acoustic and visual alarms
• 2 switch outputs
• ATEX certified
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL (0...5 % vol) CH₄
• Resolution 0,1 % LEL (50 ppm) CH₄
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 20 / 50 % LEL CH₄

• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL CH₄
• Resolution 0,1 % LEL CH₄
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 20 / 50 % LEL CH₄
• Visual and acoustic alarms

• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL (0...5 % vol) CH₄
• Resolution 0,1 % LEL (50 ppm) CH₄
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor options

• Metal-oxide gas sensor
• Range: 0...100% LEL (0...5 %) CH₄
• Resolution: 0,1 % LEL (50 ppm) CH₄
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+70 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Input: Modbus RTU – RS-485
• Output: 4-channel SPST relay contacts
• Rated relay load: 3 A at 250 Vac; 3 A at 30 Vdc
• Non-volatile memory to retain and restore relay states following power outages
• Watchdog functionality for communication loss
• Operating temperature / humidity: -20…+60 °C / 10…90 % (non-condensing)
• DIN rail mounting
• Power supply: 5…28 Vdc
• Warranty: 3 years

Multifunction astronomical digital clocks RDT-TPA2 are applied for switching on and off the lightning or other electrical receivers in accordance to sunset and sunrise.

• 80 programs (astronomical and annual), holiday mode, random mode
• Automatic summer/winter digital clockover
• Automatic transfer of weekdays
• Sealable cover of the front panel, easy setting by 4 buttons
• Backlighted LCD display (can be turned off)
• 10-year power reserve (internal lithium battery which can protect real time clock and all the settings when the electric power supply is off)
• Number and type of contacts: 2 CO (each channel can be assigned an individual program)
• Rated load: 16 A / 250 V AC
• Direct mounting on 35 mm rail mount acc. to EN 60715
• Compliance with standards EN 60730-1, EN 60730-2-7, Directive RoHS

SIRO is an indoor air quality transmitter with a modern design. The transmitter is available with several optional air quality sensors. The modular device can be equipped with CO2 concentration and VOC (Volatile Organic Compounds) measurements or alternatively PM (Particulate Matter) measurement, and in addition, temperature and humidity measurements. SIRO-MOD series models use Modbus serial communication protocol.

• Measuring elements:
  • CO2: Non-dispersive infrared (NDIR); 0...2000 ppm
  • VOC: Complementary Metal Oxide Semiconductor (CMOS); range: * - see datasheet
  • PM: Laser-based light scattering particle sensing
  • Temperature: Integrated to CMOS
  • Relative humidity: Thermoset polymer capacitive sensing element
• Field configurable outputs for selected measurements; Configuration possible through MODBUS
• Proportional output options including voltage (0–10 V, 0–5 V, 2–10 V) and optional current (4–20 mA); MODBUS
• Offset feature enabling field calibration for each measurement parameter (CO2, VOC, PM, RH, T)
• Optional LCD-display and buttons
• Operating temperature: 0…50 °C
• Protection standard: IP20

• 10 time functions. With control signal and without additional signal
• 10 time ranges. Ranging from 0,1 sec. to 30 hours
• Operating voltage: 12…240 V AC / DC
• Operating power: < 4 VA
• Mounting on DIN rail
• Operating temperature: -20…+55 °C

• Supplies and controls NAMUR sensors (1 or 2 channels)
• Relay or transistor output
• Output voltage: 9,2 VDC
• High frequency switching (up to 2 kHz)
• DIN rail-mounted
• LED indication
• Supply: 24 VDC / 230 VAC
• Operating temperature: -20...60 °C
• Protection class: IP20

• Electrochemical gas sensor
• Range: 0...250 ppm NO
• Resolution: 1 ppm NO
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -30...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Stable long-life electrochemical gas sensor
• Range 0...20 / 0...200 ppm NO₂
• Resolution 0,02 / 0,1 ppm NO₂
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 3 / 6 ppm NO₂

• Stable long-life electrochemical gas sensor
• Range 0...20 / 0...200 ppm NO₂
• Resolution 0,02 / 0,1 ppm NO₂
• Outputs 2 x 4...20 mA / 0...10 V, RS-485

• Electrochemical gas sensor
• Range:
• -- 0...20 ppm NO₂
• -- 0...200 ppm NO₂
• Resolution:
• -- 0,1 ppm NO₂ for 20 ppm range
• -- 1 ppm NO₂ for 200 ppm range
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -20...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• OilSET-1000 is designed for oil detection in separators, basins and tanks
• Easy to install, does not need calibration
• 2 switch outputs
• Ultrasonic sensor SET/S, 5 meter cable
• ATEX certified
• Wall-mounted, IP67
• Supply: 230 VAC, 50/60 Hz

• System consists of alarm device SET-1000 and fixed level vibration sensor SET/V
• For usage separators, basins and tanks
• Alarm device SET-1000 is a single-channel level switch
• When used with SET/V, SET-1000 alarms when set high level in tank is exceeded
• ATEX certified
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

• Stable long-life electrochemical gas sensor
• Range 0...20 % vol O₂
• Resolution 0,01 % vol O₂
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 19,5 / 18 % vol O₂

• Stable long-life electrochemical gas sensor
• Range 0...20 % vol O₂
• Resolution 0,01 % vol O₂
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor options

• Electrochemical gas sensor
• Range: 0...25 % O₂
• Resolution: 0,01 % O₂
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -30...+50 °C
• Supply: 12...36 VDC, 24 VAC or 230 VAC

• Stable long-life electrochemical gas sensor
• Range 0...5 ppm O₃
• Resolution 0,03 % ppm O₃
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 0,3 / 1 ppm O₃
• Attached or remote sensor

• Stable long-life electrochemical gas sensor
• Range 0...5 ppm O₃
• Resolution 0,03 % ppm O₃
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor

• Electrochemical gas sensor
• Range: 0...5 ppm O₃
• Resolution: 0,01 ppm O₃
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

Phase voltage controller PKF-302. The device is designed for electric motor protection from asymmetric supply and grid voltage drop. The controller has two switch outputs of which one is used for protective shutdown and another for alarm. Simplified type 333 variant.

• Channels: Shutdown and alarm
• Supply: 3x (50...230...265)V. Max 2,5W
• Frequency: 40...50...60 Hz
• Indicator: 3 x LED 3 digits
• Measuring mode: True RMS
• Activation voltage: 185 V
• Reset voltage: 195 V
• Activation time: about 1s
• Reset time: 1...999 s (optional 4 or 6 s)
• Switch outputs: 2 x switching 2A, 250V AC
• Ambient temperature: -15°C...55°C
• Mounting: 35 mm rail
• Protection class: panel IP40; connections IP20

Phase voltage controller PKF-333SZE. The device is designed for electric motor protection from asymmetric supply and grid voltage drop or overvoltage and automatic UPS activation. The controller monitors voltage phase angles and harmonic distortions due to generated high harmonics.

Phase voltage controller PKF-333SZR. The device is designed for electric motor protection from asymmetric supply and grid voltage drop or overvoltage and automatic UPS activation. The controller monitors voltage phase angles and harmonic distortions due to generated high harmonics.

• Maximum efficiency up to 98,5 % (SiC technology)
• Wide MPPT voltage range: 350...800 V
• Maximum power point tracking, up to 3 MPPT trackers
• Large graphical display provides an easy, user friendly operator interface
• Versions without transformer for enhanced efficiency
• Inputs/outputs: 3 x analog inputs, 2 x digital inputs, 2 x digital outputs
• 2 x RS-485 ports
• Auxiliary 24 VDC supply for connection of environmental sensors
• Integrated data logger for operation and fault data logging
• USB port for quick and handy saving of production and operation data
• Integrated DC circuit breaker under load
• Protection against overcurrent, overtemperature, reverse DC polarity, AC and DC overvoltage
• Natural ventilation minimizes breakdown and maintenance
• Full power without derating up to 50 °C ambient temperature
• Protection class: IP65 (suitable for both indoor and outdoor installation)

• PID control function with accurate self-tuning
• Input: Pt100 (-200…+600 °C ± 0,5 % of full scale ± 1 digit)
• Relay output: 250 V AC (5, 8, 16 A) NO / NC
• Control algorithm: On-Off / P, PI, PD, PID (configurable)
• Soft start feature
• Selectable heating / cooling control
• In case of sensor failure, periodically, auto-periodically running or relay state can be selected
• Mountable on DIN rail
• Power supply: 230 V AC, 10…30 V DC - 8…24 V AC (selectable on order)
• Operating temperature: 0…+50 °C

Single-phase power controller – commutator RP1. The device can be used or circuit commutations in heat element devices. Can be used for resistive and inductive loads. Possible control: pulse or standard (analog signal).

Other functions:

• Load current limiting
• Soft start
• Initial load power setting
• Control with an external signal
• Load current control
• Fuse failure detection
• Overload indication
• Master/slave output
• Switch output

• Power factor controller for reactive power compensation
• Measures 73 power network parameters (40 visible on screen, all via Modbus RTU)
• Relay outputs: 4 / 6 / 8
• Programmable switch in time, switch off time and discharge time
• Alarm message and relay output
• Optional digital output: Modbus RTU (RS-485)
• Optional real time clock (RTC)
• LCD screen
• Operating temperature: -10...+60 °C
• Protection class (front): IP54

• Measures and records power network parameters in single phase or three phase 3 and 4-wire symmetrical and asymmetrical systems
• 54 electrical network quality parameters
• Analysis of voltage and current harmonics (up to the 51-st)
• Color touchscreen: LCD TFT 3.5“, 320 x 240
• 2 configurable alarm outputs
• Analog output 0/4...20 mA and 2 x Pt100 inputs (optional)
• Digital output: RS-485 (MODBUS)
• Ethernet / Profinet 2.2
• Supply: 85...253 VAC / 90...300 VDC or 20...40 VAC / 20...60 VDC
• Battery backup RTC
• Dimensions: 96 x 96 x 77 mm

• Measures and records parameters in 3 and 4-wire, 3-phase, balanced or unbalanced power network
• Up to 500 electrical network quality parameters according to EN 50160, EN 61000-4-30, standards
• Measuring class A or A / S
• Support the IEC 60870-5-104 communication protocol (new - option)
• Analysis of voltage and current harmonics and interharmonics (up to the 51-st)
• Monitoring up to 6 additional energy meters with pulse output
• Recording of measurements before and after events (dips & swells)
• Configurable archives of logged values and events
• SD card support (up to 32 GB)
• Webserver function, FTP server, DHCP client
• Outputs: relays, binary, analog
• Binary inputs
• E-mail alarms
• Interfaces: RS-485 Modbus slave, Ethernet 100 Base-T (Modbus TCP server), USB device and host
• Color touchscreen: LCD TFT 5.6“
• Many data representation modes (i.e. digital display, analog, bar graph, vector diagram)
• IP65 protection class for front side
• Real time clock (RTC) synchronization with NPT time server
• Time synchronization via external GPS module - STR  receiver (new - option)

• Interface: Ethernet (Modbus TCP), RS485 (Modbus RTU Master / Slave), RS232 (Slave)
• Webserver
• Functional Block programming software
• LED signaling for Link/Act Ethernet, serial RX-TX, power supply
• Configurable by the software DEV9K
• Galvanic isolation  on all the ways (1500 VAC)

• Interface: Ethernet (Modbus TCP), RS485 (Modbus RTU Master / Slave), RS232 (Slave)
• Webserver
• Functional Block programming software
• LED signaling for Link/Act Ethernet, serial RX-TX, power supply, digital inputs and digital outputs state
• Configurable by the software DEV9K
• Capable to connect the sensors to the analog inputs
• Galvanic isolation on all the ways (1500 VAC)

• 2 analog outputs (operating simultaneously):
  1. Current 4...20 mA or 0...20 mA (active output, cannot be supplied in two-wire current loop);
  2. Voltage 0...10 V.
• Soft start/stop (ramping) or a triangular wave generator triggered manually or automatically after switching power on
• 7-segment LED display with adjustable brightness
• Optional RS485/RS232 serial interface (galvanically isolated, MODBUS-RTU communication protocol)
• Password protection
• High accuracy and immunity to interference
• Supply: 230 VAC or 24 VAC/VDC
• Panel housing 96 x 48 x 79 mm
• Protection: IP65 (front) / IP20 (back)

• Thermosetting cabinet with double doors. The cabinet dimension: 600 x 500 mm (max 2x 5,5 kW) or 800 x 600 (max 2x 7,5 kW; ... max 2x 22 kW).
• Plinth or foundation for fixing the cabinet.
• PLC controller with a display that changes the backlight depending on operating mode.
• Program saved in the controller and on the SD card, enabling transferring the program to another controller in the event of a failure.
• Router equipped with a 2G / 3G / 4G / LTE modem, 1 LAN 10 / 100 Mb/s port and radio module in the 802.11 b/g/n standard, supporting MIMO 2x2.

Reactive power controller RMB-10S. The device is designed for reactive power compensation battery control. Version with 6 switch outputs is available.

• Data visualization in WWW server
• Convenient login from various devices (PC, tablet, phone)
• Readout of up to 2500 values of slave devices (up to 100 devices, 25 registers each)
• 1 GB Flash memory
• E-mail messages in case of alarm occurrence
• 2 alarm outputs or 2 binary inputs
• RS-232, RS-485, USB, Ethernet, RTC

• The MQTT protocol is ideal for communication in distributed acquisition systems data (IoT applications)
• Data visualization in WWW server
• Convenient login from various devices (PC, tablet, phone)
• Readout of up to 2500 values of slave devices (up to 100 devices, 25 registers each)
• 8 GB Flash memory
• Real time clock (RTC)
• 2 alarm outputs or 2 binary inputs
• RS-232, RS-485, USB, Ethernet

• For R-12, R-123, R-125, R134a, R143, R-22, R404a, R-407c, R-410a, etc.
• Default calibration R-404a
• Range 0...1000 ppm
• Resolution 1 ppm
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485

• For R-12, R-123, R-125, R134a, R143, R-22, R404a, R-407c, R-410a, etc.
• Default calibration R-404a
• Long-life MOS sensor
• Range 0...1000 ppm
• Resolution 1 ppm
• Outputs 2 x 4...20 mA / 0...10 V, RS-485

• MOS gas sensor
• Detected gases: R-12, R-123, R-125, R-134a, R-143, R-22, R-404a, R-407c, R-410a, R1234yf, etc.
• Standard calibration: R-404a
• Range: 0...1000 ppm HFC
• Resolution: 1 ppm HFC
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -30...+60 °C
• Supply: 11..30 VDC / 24 VAC arba 90...265 VAC

Regulator RE22 is designed to control furnace, dryer, cast machine and other devices’ temperature.

Regulator RE55 is designed to control temperature in food and chemistry industry.