Controllers, indicators

Phase voltage controller PKF-333SZE. The device is designed for electric motor protection from asymmetric supply and grid voltage drop or overvoltage and automatic UPS activation. The controller monitors voltage phase angles and harmonic distortions due to generated high harmonics.

Phase voltage controller PKF-333SZR. The device is designed for electric motor protection from asymmetric supply and grid voltage drop or overvoltage and automatic UPS activation. The controller monitors voltage phase angles and harmonic distortions due to generated high harmonics.

• Maximum efficiency up to 98,5 % (SiC technology)
• Wide MPPT voltage range: 350...800 V
• Maximum power point tracking, up to 3 MPPT trackers
• Large graphical display provides an easy, user friendly operator interface
• Versions without transformer for enhanced efficiency
• Inputs/outputs: 3 x analog inputs, 2 x digital inputs, 2 x digital outputs
• 2 x RS-485 ports
• Auxiliary 24 VDC supply for connection of environmental sensors
• Integrated data logger for operation and fault data logging
• USB port for quick and handy saving of production and operation data
• Integrated DC circuit breaker under load
• Protection against overcurrent, overtemperature, reverse DC polarity, AC and DC overvoltage
• Natural ventilation minimizes breakdown and maintenance
• Full power without derating up to 50 °C ambient temperature
• Protection class: IP65 (suitable for both indoor and outdoor installation)

• PID control function with accurate self-tuning
• Input: Pt100 (-200…+600 °C ± 0,5 % of full scale ± 1 digit)
• Relay output: 250 V AC (5, 8, 16 A) NO / NC
• Control algorithm: On-Off / P, PI, PD, PID (configurable)
• Soft start feature
• Selectable heating / cooling control
• In case of sensor failure, periodically, auto-periodically running or relay state can be selected
• Mountable on DIN rail
• Power supply: 230 V AC, 10…30 V DC - 8…24 V AC (selectable on order)
• Operating temperature: 0…+50 °C

Single-phase power controller – commutator RP1. The device can be used or circuit commutations in heat element devices. Can be used for resistive and inductive loads. Possible control: pulse or standard (analog signal).

Other functions:

• Load current limiting
• Soft start
• Initial load power setting
• Control with an external signal
• Load current control
• Fuse failure detection
• Overload indication
• Master/slave output
• Switch output

• Power factor controller for reactive power compensation
• Measures 73 power network parameters (40 visible on screen, all via Modbus RTU)
• Relay outputs: 4 / 6 / 8
• Programmable switch in time, switch off time and discharge time
• Alarm message and relay output
• Optional digital output: Modbus RTU (RS-485)
• Optional real time clock (RTC)
• LCD screen
• Operating temperature: -10...+60 °C
• Protection class (front): IP54

• Measures and records power network parameters in single phase or three phase 3 and 4-wire symmetrical and asymmetrical systems
• 54 electrical network quality parameters
• Analysis of voltage and current harmonics (up to the 51-st)
• Color touchscreen: LCD TFT 3.5“, 320 x 240
• 2 configurable alarm outputs
• Analog output 0/4...20 mA and 2 x Pt100 inputs (optional)
• Digital output: RS-485 (MODBUS)
• Ethernet / Profinet 2.2
• Supply: 85...253 VAC / 90...300 VDC or 20...40 VAC / 20...60 VDC
• Battery backup RTC
• Dimensions: 96 x 96 x 77 mm

• Measures and records parameters in 3 and 4-wire, 3-phase, balanced or unbalanced power network
• Up to 500 electrical network quality parameters according to EN 50160, EN 61000-4-30, standards
• Measuring class A or A / S
• Support the IEC 60870-5-104 communication protocol (new - option)
• Analysis of voltage and current harmonics and interharmonics (up to the 51-st)
• Monitoring up to 6 additional energy meters with pulse output
• Recording of measurements before and after events (dips & swells)
• Configurable archives of logged values and events
• SD card support (up to 32 GB)
• Webserver function, FTP server, DHCP client
• Outputs: relays, binary, analog
• Binary inputs
• E-mail alarms
• Interfaces: RS-485 Modbus slave, Ethernet 100 Base-T (Modbus TCP server), USB device and host
• Color touchscreen: LCD TFT 5.6“
• Many data representation modes (i.e. digital display, analog, bar graph, vector diagram)
• IP65 protection class for front side
• Real time clock (RTC) synchronization with NPT time server
• Time synchronization via external GPS module - STR  receiver (new - option)

• Interface: Ethernet (Modbus TCP), RS485 (Modbus RTU Master / Slave), RS232 (Slave)
• Webserver
• Functional Block programming software
• LED signaling for Link/Act Ethernet, serial RX-TX, power supply
• Configurable by the software DEV9K
• Galvanic isolation  on all the ways (1500 VAC)

• Interface: Ethernet (Modbus TCP), RS485 (Modbus RTU Master / Slave), RS232 (Slave)
• Webserver
• Functional Block programming software
• LED signaling for Link/Act Ethernet, serial RX-TX, power supply, digital inputs and digital outputs state
• Configurable by the software DEV9K
• Capable to connect the sensors to the analog inputs
• Galvanic isolation on all the ways (1500 VAC)

• 2 analog outputs (operating simultaneously):
  1. Current 4...20 mA or 0...20 mA (active output, cannot be supplied in two-wire current loop);
  2. Voltage 0...10 V.
• Soft start/stop (ramping) or a triangular wave generator triggered manually or automatically after switching power on
• 7-segment LED display with adjustable brightness
• Optional RS485/RS232 serial interface (galvanically isolated, MODBUS-RTU communication protocol)
• Password protection
• High accuracy and immunity to interference
• Supply: 230 VAC or 24 VAC/VDC
• Panel housing 96 x 48 x 79 mm
• Protection: IP65 (front) / IP20 (back)

Reactive power controller RMB-10S. The device is designed for reactive power compensation battery control. Version with 6 switch outputs is available.

• Data visualization in WWW server
• Convenient login from various devices (PC, tablet, phone)
• Readout of up to 2500 values of slave devices (up to 100 devices, 25 registers each)
• 1 GB Flash memory
• E-mail messages in case of alarm occurrence
• 2 alarm outputs or 2 binary inputs
• RS-232, RS-485, USB, Ethernet, RTC

• The MQTT protocol is ideal for communication in distributed acquisition systems data (IoT applications)
• Data visualization in WWW server
• Convenient login from various devices (PC, tablet, phone)
• Readout of up to 2500 values of slave devices (up to 100 devices, 25 registers each)
• 8 GB Flash memory
• Real time clock (RTC)
• 2 alarm outputs or 2 binary inputs
• RS-232, RS-485, USB, Ethernet

• For R-12, R-123, R-125, R134a, R143, R-22, R404a, R-407c, R-410a, etc.
• Default calibration R-404a
• Range 0...1000 ppm
• Resolution 1 ppm
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485

• For R-12, R-123, R-125, R134a, R143, R-22, R404a, R-407c, R-410a, etc.
• Default calibration R-404a
• Long-life MOS sensor
• Range 0...1000 ppm
• Resolution 1 ppm
• Outputs 2 x 4...20 mA / 0...10 V, RS-485

• MOS gas sensor
• Detected gases: R-12, R-123, R-125, R-134a, R-143, R-22, R-404a, R-407c, R-410a, R1234yf, etc.
• Standard calibration: R-404a
• Range: 0...1000 ppm HFC
• Resolution: 1 ppm HFC
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -30...+60 °C
• Supply: 11..30 VDC / 24 VAC arba 90...265 VAC

Regulator RE22 is designed to control furnace, dryer, cast machine and other devices’ temperature.

Regulator RE55 is designed to control temperature in food and chemistry industry.

Temperature regulator RE71 is designed for fixed range and sensor. Input type is selected while ordering. Control: ON/OFF, PID, PID+Autotuning, Smart PID.

Temperature regulator RE72 for ladder control, designed for temperature stabilization in plastics and food industries.

• Universal measurement input
• Auxiliary measurement input 0/4...20 mA
• Binary input
• Ladder temperature control, 15 programs with 15 intervals
• Soft start
• ON/OFF, PID, PID step-by-step (step valve control) or PID heating – cooling
• 8 alarm types, alarm control
• Timer function
• Front panel protection class IP65
• Backside protection class IP20

Temperature regulator RE81 for fixed range and sensor, with 2 switch or SSR outputs, designed for control in heating, conditioning systems. Function for 3-position control. Control: ON/OFF, PID, PID+Autotuning, Smart PID and 3-position. Input type selected when ordering.

Process regulator RE82 is designed for temperature stabilization in plastics and food industry.

• Ethernet connection
• Digital inputs: 2
• 1-Wire input (up to 2 sensors)
• Analog inputs: 2 (0...60 VDC)
• Relay outputs: 2 (NO/NC)
• Webserver
• HTTP and XML API commands
• E-mail alarms, SMTP, SNMP
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...14 VDC

• Ethernet connection
• Digital inputs: 2
• Relay outputs: 2 (NO/NC)
• Webserver
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...14 VDC

The PD9W is an industrial RS-232 / RS-485 to WiFi and Ethernet converter.

• Communication interfaces: 1x RS485, 1 x RS232, 1x Ethernet and WiFi (802.11b/g/n)
• Modes: AP, STA, AP + STA, AP + LAN, AP + WAN, Route and Bridge
• Work modes: transparent transmission mode, serial port command mode, HTTP Client mode, Modbus TCP<=>Modbus RTU mode and AT command mode
• Configuration the parameters via the WEB server
• RS232 port for RTS/CTS signals
• Hardware Watchdog, Heartbeat
• Electrostatic protection 15 / 8 kV
• Power supply: 5…36 V dc

PD9-Modbus RS485 to Ethernet converter can realize bidirectional transparent transmission between RS485 and Ethernet. It carries ARM processor, low power, fast speed, high stability. Via web-page or software, Rs-485 to Ethernet Converter can realize serial data and TCP/IP data package transparent transmission.

• Communication interfaces: 1x RS485, 1x Ethernet WAN/LAN
• Easy configuration the parameters via the webpage or set-up software
• Compact size, DIN rail mount
• Working mode: TCP server, TCP client, UDP server, UDP client
• Modbus RTU to TCP conversion, Modbus Polling
• DHCP support, IP dynamic or static
• Watchdog function
• Working temperature: -40…85°C
• Power supply: 5…36 V dc

• Digital input: 4 ch. pulse
• Independent modes: OPEN / CLOSED (“Dry contact”) and COUNTER (S0 standard)
• Output: RS-485 MODBUS RTU interface
• Non-volatile memory for counters storage and settings
• Galvanically isolated inputs
• DIN rail mounting
• Protection class: IP40 (connections IP20)
• Operating temperature range: -20…+60 °C
• Power supply: 5…28 VDC

They are used to regulate the power delivered to the receiver, where this power is proportional to the input control signal. They are used in automation control systems where smooth control of receiver power is required for resistive or resistive-inductive loads. Typical applications for power controllers: heaters, industrial furnaces (annealing, quenching, drying, etc.), dryers, plastics processing equipment, industrial sealing machines, glass production industry, industrial heating systems (matting and lining of pipelines), load transformers.

• Single-phase power controller (phase angle load control)
• Control input: DC voltage 0...10 V DC (RSR92-..V..) or current 4...20 mA (RSR92-..I..)
• SCR output (thyristors)
• Load current 25...80 A
• Max. load voltage 280, 530 V AC (single-phase)
• Dielectric strength 4 000 Vrms (opto-isolation)
• MOV protection (built-in varistor)
• Mounting on panel or on heatsinks
• Recognitions, certifications, directives: RoHS, REACH, CE, EAC

• Self-operating signal lamps (optic signaling of AC/DC voltage presence in 1-phase network via lighting of one non-replaceable LED)
• LED colors: green, red, yellow
• Cover - modular, width 17,5 mm
• Direct mounting on 35 mm rail mount acc. to EN 60715
• Applications: in low-voltage systems (130…260 V)
• Compliance with standards: EN 62094-1, EN 61000-4-2, 3, 4, 5, 6, 11
• Recognitions, certifications, directives: RoHS, CE, EAC, UKCA

• Sludge and sand detection
• Oil on water surface detection
• Designed for usage in separators, basins and tanks
• Easy to install, does not need calibration
• Reliable long-term se in harshest conditions
• Acoustic and visual alarms
• 2 switch outputs
• ATEX certified
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

• SandSet-1000 is designed for sludge and sand detection in separators, basins and tanks
• Easy to install, does not need calibration
• Reliable long-term se in harshest conditions
• Acoustic and visual alarms
• 2 switch outputs or output to LabkoNet remote monitoring system
• Ultrasonic sensor SET/S, 5 meter cable
• ATEX certified
• Wall-mounted, IP67
• Supply: 230 VAC, 50/60 Hz

• Separator alarm system for applications where mains supply is not available
• ATEX certified
• Alarms:
  • high level detection
  • oil on water surface detection
  • sludge under water detection
• SolarSet Beacon consists of:
  • housing containing and panel
  • battery
  • charger controller
  • flashing beacon for alarm
  • sludge and oil level sensor system LevelSet S

• Separator alarm system for applications where mains supply is not available
• ATEX certified
• Alarms:

• high level detection

• oil on water surface detection

• sludge under water detection

• SolarSet Beacon consists of:

• housing containing and panel

• battery

• charger controller

• GSM/GPRS modem

• flashing beacon for alarm

• sludge and oil level sensor system LevelSet S

• Separator alarm system for applications where mains supply is not available
• ATEX certified
• Alarms:
  • high level detection
  • oil on water surface detection
  • sludge under water detection
• SolarSet Beacon consists of:
  • housing containing and panel
  • battery
  • charger controller
  • GSM/GPRS modem
  • sludge and oil level sensor system LevelSet S

• Stable long-life electrochemical cell
• Range 0...50 / 0...2000 ppm SO2
• Resolution < 0,1 / 1,5 ppm SO2
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 2 / 5 ppm SO2
• Attached or remote sensor

• Stable long-life electrochemical cell
• Range 0...50 / 0...2000 ppm SO2
• Resolution 0,1 / 1,5 ppm SO2
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor

• Electrochemical gas sensor
• Range: 0...50 ppm SO₂ / 0...2000 ppm SO₂
• Resolution: 0,1 ppm SO₂ / 1,5 ppm SO₂
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -30...+50 °C
• Supply: 11..30 VDC / 24 VAC or 90...265

• Selectable double set point
• Selectable TC / Pt100 input (order option)
• Output: relay (control or alarm) and SSR (control)
• PID control
• Self-tuning feature
• Soft-start function
• Offset feature for input
• Heating/cooling control
• Manual control feature

• Two set points
• Input: TC (J, K, T, R, S) / RTD (Pt100)
• Control output: relay or SSR
• Auxiliary output: relay
• PID / ON-OFF control
• Auto-Tuning / Self-Tuning
• Alarm modes: deviation, absolute
• Heating / cooling control
• 4+4 digits high contrast LED display
• Supply: 85…270V AC / DC
• Ambient temperature: 0…50 °C

• Inputs: Pt100, thermocouples J, K
• 4-digit 20 mm LED screen
• Automatic or manual compensation
• Programmable input, decimal point, averaging time
• 24 VDC output for external transducers
• Galvanic isolation
• Supply: 230 VAC / 240 VAC / 20...40 VAC / 20...40 VDC
• Protection class: IP65

• Temperature indicator TI-N20, TI-N24 for temperature measurement from -30 to +800 °C
• Various temperature sensor construction types are available

• Temperature indicator TI-N20/5, TI-N24/5 for temperature indication
• Various temperature sensor constructions are available: Pt100, Pt1000; NTC, PTC, termopora K, J

• Temperature regulator for usage with Pt100, Pt1000 or NTC sensors
• PID or ON/OFF control
• Automatic selection of PID parameters
• One relay output and one alarm relay
• Manual control mode
• One binary input
• Operating temperature: 0...50 °C
• Supply: 230 VAC
• Protection class: front IP65, back IP20

Temperature regulator SCD210 is designed for temperature control in various devices and rooms. Made in three variants with different inputs. SCD210 has a step set point (SP) value change by signal option in binary input.

Temperature, humidity, pressure, CO2 regulators, 3 binary inputs, RS-485, RS-232 interfaces, Ethernet and 2 relay outputs.

• Three-color numerical display DL21 is designed to indicate various parameters (temperature, humidity, etc.) from external devices via RS-485
• Can be used in offices, industrial and communal buildings
• Indicator color is programmable (green, red and yellow)
• Programming is done via RS-485 port
• Can work in master and slave modes

They are used to regulate the power delivered to the receiver, where this power is proportional to the input control signal. They are used in automation control systems where smooth control of receiver power is required for resistive or resistive-inductive loads. Typical applications for power controllers: heaters, industrial furnaces (annealing, quenching, drying, etc.), dryers, plastics processing equipment, industrial sealing machines, glass production industry, industrial heating systems (matting and lining of pipelines), load transformers.

• Three-phase power controller (phase angle load control)
• Control input: DC voltage 0...10 V DC or current 4...20 mA
• SCR output (thyristors)
• Load current 25...80 A
• Max. load voltage 530 V AC (three-phase)
• Dielectric strength 4 000 Vrms (opto-isolation)
• MOV protection (built-in varistor)
• Mounting on heatsinks
• Recognitions, certifications, directives: RoHS, REACH, CE, EAC

• Self-operating signal lamps (optic signaling of AC/DC voltage presence in 3-phase network – 3(N) 400 / 230 V via lighting of one non-replaceable LED)
• LED colors: green, red, (red, yellow, green)
• Cover - modular, width 17,5 mm
• Direct mounting on 35 mm rail mount acc. to EN 60715
• Applications: in low-voltage systems (400 / 230 V)
• Compliance with standards: EN 62094-1, EN 61000-4-2, 3, 4, 5, 6, 11
• Recognitions, certifications, directives: RoHS, CE, EAC, UKCA

• Simultaneous detection of two gases (please ask for available gas combinations and possible limitations)
• Switch output: 4 x SPDT (2 for each sensor)
• Alarms: LED indicators and buzzers (85 dB)
• Supply: 24 VDC/VAC / 90...265 VAC
• Protection class: IP65