Поиск

• Digital inputs: 2
• 1-Wire input (up to 8 sensors)
• RS-485 input (up to 8 sensors)
• Analog inputs: 4 (2 x 0...10 VDC, 2 x 0...10 VDC / 4...20 mA, WEB control)
• Relay outputs: 4 (NO/NC)
• Setup via USB or SMS
• Data logger for up to 52 000 records
• Webserver
• Periodical upload of data logger file to a remote HTTP server
• HTTP Post, HTTP API
• SMS alarms (up to 5 numbers)
• E-mail alarms (up to 5 recipients), SMT with TLS support
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...24 VDC

• Digital inputs: 2
• 1-Wire input (up to 4 sensors)
• Analog inputs: 2 (0...60 VDC)
• Relay outputs: 2 (NO/NC)
• Setup via USB or SMS
• Webserver
• HTTP Post, HTTP API
• SMS alarms (up to 5 numbers)
• E-mail alarms (up to 5 recipients), SMTP with TLS support
• Operating temperature: 0...40 °C
• Warranty: 3 years
• Supply: 10...28 VDC

• Used with grain temperature sensor cables GWSL 1100, GWSL 2100 and spear sensors GWTL-R
• Cable length up to 200 m (including the temperature cables)
• Up to 32 values of temperatures are shown in cycle
• Weight: 240 g (with batteries)
• Case material: ABS
• Supply: 2 x AA (battery life circa 1 year)
• Operating temperature: -20...+40 °C

• Enables the PC to be connected to HART interface, i.e. to configure a device
• Active operation: current loop is supplied
• Passive operation: used in an existing current loop
• Included HART-Tool software
• Supply: from USB
• Galvanic isolation between USB and HART

SM400-4-TH humidity and temperature sensor supports MODBUS RTU protocol over the RS-485 interface. Suitable for environmental quality monitoring offices, server room, data center and indoor air

• Changeable communication parameters
• Non-volatile memory for all settings
• Operating temperature range: -20…60°C
  • Accuracy (min): ± 0.4 °C (in -10…+ 60 °C range)
  • Accuracy (max): ± 0.6 °C (in -20…+ 60 °C range)
  • Resolution: 0.1 °C
• Operating relative humidity range: 10…90% (non-condensing)
  • Accuracy (min): ± 3.0 % RH (in 20…80 % RH range)
  • Accuracy (max): ± 5.0 % RH (in 10…90 % RH range)
  • Resolution: 0.1 % RH
• Ingress protection: IP20
• Operating voltage range: 4.5…26 VDC

• Long-life metal-oxide gas sensor
• Range 0...100 % LEL H₂
• Resolution 0,1 % LEL H₂
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor options

• Stable long-life electrochemical gas sensor
• Range 0...100 / 0...1000 ppm H₂S
• Resolution 0,1 / 1 ppm H₂S
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 10 / 20 ppm H₂S

• Stable long-life electrochemical gas sensor
• Range 0...100 / 0...1000 ppm H₂S
• Resolution 0,1 / 1 ppm H₂S
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor option

• Electrochemical gas sensor
• Range: 0...100 / 0...2000 ppm H₂S
• Resolution: 0,1 / 1 ppm H₂S
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

The Kuhlmann Electro-Heat IBC Immersion Heater is an efficient solution for heating liquids in Intermediate Bulk Containers (IBCs), addressing viscosity challenges to enhance industrial productivity. Suitable for a variety of substances, it ensures consistent heating and easy liquid management. Its applications span multiple industries, including chemical processing, pharmaceuticals, food and beverage, and oil and gas. Constructed with durable stainless steel and featuring precise temperature control, this immersion heater combines performance with longevity.

Technical Specifications:

• Surface load: 2.2 W/cm²
• Power: 2000W
• Supply: 230V 1-phase
• Stainless steel tube element AISI 316L (1.4404)
• Length of element: 950mm
• Diameter of element: ø100mm
• Heated zone: 300mm
• Integrated PT100 sensor
• Minimum level of liquid during heating: 500mm (half full)
• Cable between heater and control unit: ~2800mm
• Digital controller: 0-90°C

An IBC silicone base heater efficiently heats up contents in an IBC container, making it easy to discharge viscous or semi-solid products with minimal waste. The 2700W heater can heat water from 15°C to 70°C in less than 40 hours. Kuhlmann’s durable silicone base heater fits various IBC containers and is easy to install and use. It can also be mounted with a digital temperature controller for precise temperature control.

Technical Specifications:

• Dimensions: 1035 - 851mm.
• Materials: 100% silicone.
• 1,5 meter power cord with no plugs.
• 0-150°C PT100 Sensor System temperature controller (additional product).
• Heats water from 15°C - 70°C in less than 40 hours in a fully loaded IBC Container.

“idOil®” is an alarm system intended for monitoring liquid levels particularly in oil and sand separators. The system consists of the idOil control unit and the idOil sensors installed in the separator. The sensor cables can be extended with a cable connector or connection box. One to three digital idOil sensors of the same or different type can be connected to the control unit. The sensors can be used to monitor the following:

• High liquid level (idOil-LIQ high liquid level sensor)
• Oil layer detection (idOil-OIL oil sensor is for class IIA explosive liquids and idOil-OIL-Soil sensor is for class IIB explosive liquids)
• Sludge layer detection (idOil-SLU sludge sensor)

• Measurement of parameters: voltage, current, active, reactive and apparent power, cosφ, tgφ, frequency, active, reactive and apparent energy, active power 15 minutes, voltage 10 minutes
• Current and voltage harmonics analysis up to 51st (measurements available via RS-485)
• Programmable input:
  • Current: 0…1 / 0…5A
  • Voltage: 0…100V / 0…230V / 0…400V
• Output:
  • Analog: 0/4...20 mA or 0...10 V
  • Relays: 1 or 4
  • Binary (OC)
• Digital output: RS-485 modbus (can be programmed through RS-485)
• Two-line LCD display
• Pulse output to measure energy consumption
• 4 alarm outputs with signaling on LED diodes, working in 7 different modes
• Conversion of any measured value into an analog signal 0/4...20 mA or 0...10V
• Protection grade: frontal side – IP65 / from terminal side – IP10
• Operating temperature: -25...23...55 °C

• Voltage measurement ± 600 V, current measurement via shunt, power, energy and capacity measurement of d.c. circuits
• 4 alarm outputs with signaling on led diodes, working in 7 different modes
• Analog outputs: 0/4...20 mA or 0...10 V
• Digital output: RS-485 / MODBUS RTU
• Two-line LCD display
• Protection grade: frontal side – IP65 / from terminal side – IP10
• Operating temperature: -25...23...55 °C

The CM22 provides essential video security features in a compact form. It is a 3MP (2048x1536) camera with 10 meters of IR light range, and includes people and vehicle detection for motion search and trajectory analysis. The CM22 camera, combined with the SV23 vape detector and air quality sensor, and powered by the Verkada Command cloud computing platform, creates a powerful vape prevention and logging system.

• 30, 60 and 90 days of data retention (256…768 GB) on hardware and cloud back-up. If the connection to the Command cloud is lost, data is saved onboard and synced once the internet connection is restored
• Easy to install: no NVR, DVR, servers or port forwarding, just PoE connection
• Alerts: Camera status (offline), motion detection, people detection, vehicle detection, crowd detection, line-crossing detection, loitering detection
• Privacy: live face blur, privacy regions and audit log
• Field of view: Horizontal: 95°; Vertical: 69°; Diagonal: 130°
• Operating temperature / humidity: -10…50 °C / 0…90 %
• Connection and power input: RJ-45, PoE (IEEE 802.3af type 1)
• Certifications: FCC, ICES, RCM, VCCI, CE, UKCA, EN 50155 railway compliance, UL/cUL/IEC 62368-1, NOM
• Warranty: 5 years

• Applications of flue gas analyzer Si-Ca 230: boilers, burners, water heaters, gas and diesel engines, furnaces, industrial kilns, industrial heating systems, incinerators
• Detectable gases: O₂, CO (H₂ comp.), CO₂, NO, Low NO, NO₂, Low NO₂, NOx, Low NOx, SO₂, Low SO₂, CxHy (HC), H₂S
• Up to six gas sensors
• CO measurement up to 50 000 ppm
• Other measurement parameters: flue temp., air temp., differential temp., pressure / draft, excess air, combustion efficiency, combustion efficiency (condensation), stack gas velocity
• Color graphical touchscreen for control
• Communication: USB, Bluetooth (mobile App), remote printer
• Measurement storage: 2000 data points + smartphone and PC
• Predictive maintenance with estimated sensor life and calibration reminders
• Protection class: IP42
• Power supply: Rechargeable battery, Li-Ion 5100 mA/h 3.6 V (8 hours working time)
• Operating temperature: -5…+45 °C
• Sensor protection by pump stopping

The Internal IBC Heater is a unique approach to heating viscous foodstuffs and chemicals within IBC Containers. It is designed to protect sensitive products, such as syrups, honey, treacle, molasses, fats and other viscous products that are difficult to process. Most products can be batched within a relatively short time, increasing efficiency and reducing down time.

Technical specifications:

• Designed for insertion into 1000 litre cubic IBC but will also fit inside most IBC configurations.
• Adjustable temperature range from 0°C to 70°C using an easy to use controller on the top of the heater.
• 230/240 Volts - up to 2.4kW power output.
• Finned, food safe heating element that is inserted into the IBC, thereby heating the contents directly.
• Fast batching ability. Unique thermodynamic core that gives even temperature distribution along the heating extrusion,
• Preventing thermal damage to the liquid contents of the IBC.
• Non-stick industrial strength Xylon coating for easy washdown.
• Carefully designed low Watt density to protect sensitive products.
• Lightweight with stainless steel handles for easy insertion and extraction.
• Even temperature distribution along the length of the heating extrusion.
• Colored LED for power cycle and status indication.
• 16 Amp blue industrial power plug.
• Protective sleeve between the base of the control unit and the neck of the IBC to prevent ingress of contaminants.
• Robust Construction:
• IP67-rated body with potentiometer control mounted under protective see-through cover.
• The product is sealed to ensure that all the connections and components are waterproof.
• Robust IP67-rated aluminum case.
• Long life heating elements.

• Ethernet connection
• Digital inputs: 2
• 1-Wire input (up to 2 sensors)
• Analog inputs: 2 (0...60 VDC)
• Relay outputs: 2 (NO/NC)
• IP watchdog function
• Webserver
• SNMP alarms
• VLAN and MAC address filtering
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...14 VDC

Analog laser light barriers and their electronic control units. Round or rectangular cross-sections are used for measuring, positioning or detection of objects starting from 0,01 mm (i.e. threads) from great distance (up to 100 m, depending on model).

These sensors should be used where high positioning accuracy is required.

C-LAS compact laser light barriers are ideally suited for positioning tasks.

Laser digital light barriers D-LAS operate by using parallel visible laser light. These light barriers are ideal for positioning tasks.

Laser fork light barriers F-LAS for complex problems. These light barriers are ideal for positioning tasks.

Fork light barriers of the FIA series primarily are chosen for high-precision trigger applications. They are frequently used in the stamping industry. Because of their compact and very sturdy design they are generally used in rough industry environments.

Laser miniature light barriers M-LAS have very small dimensions and work at distance up to 2 m. These light barriers are ideal for positioning and small object detection tasks.

System is designed to measure width of planar products on conveyor belt. System can be used as a separate module or integrated into production line for process control. It enables to compensate conveyor belt unevenness even if shaft imbalance to axle is present, not affecting measurement accuracy.

If there is no way to measure the product from both sides (i.e. on conveyor belt), one-sided system can be used. In this way the accuracy will depend on evenness of product movement.

Can be conducted without stopping the belt:

• Measure product width
• Detect product curvature

Additional functions:

• Count products
• Measure downtime
• Control processes which influence product width

System consists of following:

• Sensor Instruments high accuracy laser distance sensors
• PLC
• HMI or computer

An integrated polarization filter ensures protection against spurious triggering caused by reflecting objects.

• Adjustable start time delay: 0...16 s
• Operating resistance: 0...100 kΩ
• Mounting on DIN rail
• Operating temperature: -10...50 °C
• Supply: 117/230/400 VAC
• Protection class: IP20

• Three versions by sensitivity: NS (standard), AS (high), SR (adjustable)
• Operating resistance: 5,6 kΩ (NS) 70 kΩ (AS) 0...100 kΩ (SR)
• Mounting on DIN rail
• Operating temperature: -10...50 °C
• Supply: 117/230/400 VAC
• Protection class: IP20

• Incremental encoder output: A, B   /   A, B, Z   /   A, /A, B, /B   /   A, B, Z, /A, /B, /Z
• Resolution: 5 / 10 / 25 / 50 μm
• Magnetic measurement (contactless, non-friction system)
• Vibration-resistant
• Cable length: 3 / 5 / 8 / 10 m (optionally 5...50 m)
• Supply: 10...30 VDC / 5 VDC
• Operating temperature: -25...+85 °C
• Protection class: IP67

• Incremental encoder output: A, B   /   A, B, Z   /   A, /A, B, /B   /   A, B, Z, /A, /B, /Z
• Resolution: 5 / 10 / 25 / 50 μm
• Portable reference point
• Stroke values up to 2000 mm
• Vibration-resistant
• Cable length: 3 / 5 / 8 / 10 m (optionally 5...50 m)
• Supply: 10...30 VDC / 5 VDC
• Operating temperature: -25...+85 °C
• Protection class: IP65

• SpotScan is a linear scanning add-on for RAYTEK, IRCON noncontact IR thermometers ENDURANCE, Marathon MM, Modline 5 and Modline 7

• SpotScan is designed to broaden the capabilities of noncontact IR thermometers while scanning measured surface linearly thus measuring wider than one dot target area

The enLink IAQ Vape transmits data using long range LoRa wireless which easily integrates with cloud services or on-site Systems.

• Sensed parameters: Temperature, Relative humidity, VOC, CO2, Particles PM (0.1, 0.3, 0.5, 1.0, 2.5, 5.0 & 10), Barometric pressure, Sound*, Ozone**, Arsine*, Formaldehyde*, Methyl Mercaptan*, Chlorine*, Carbon Monoxide*, Ethylene Oxide*, Hydrogen*, Hydrogen Sulphide*, Hydrogen Cyanide*, Ammonia*, Nitrogen Dioxide*, Oxygen*, Odorous gases*, Phosphine*, Sulphur Dioxide*
• Distinguishes between vaping and smoke and counts the number of detections
• Communication: LoRaWAN; frequency range: 863-870 MHz; up to 16 km range
• Measurement sending interval: 30 s to 3 hours or adaptive (triggered by vape or smoke)
• Power suplly: 12…24V V DC, 0.15 Amp (max)
• Configuration via USB cable / downlink
• Operating Temp. / Humidity: 0…40 °C / 0…95 % RH

The enLink OAQ Vape transmits data using long range LoRa wireless which easily integrates with cloud services or on-site Systems.

• Sensed parameters: Temperature, Relative humidity, VOC, CO2, Particles PM (1.0, 2.5, 4.0 & 10), Barometric pressure, Ozone**, Arsine*, Formaldehyde*, Methyl Mercaptan*, Chlorine*, Carbon Monoxide*, Ethylene Oxide*, Hydrogen*, Hydrogen Sulphide*, Hydrogen Cyanide*, Ammonia*, Nitrogen Dioxide*, Oxygen*, Odorous gases*, Phosphine*, Sulphur Dioxide*
• Communication: LoRaWAN; frequency range: 863-870 MHz; up to 16 km range
• Measurement sending interval: 30 s to 3 hours
• Power supply: 12…24V V DC, 0.15 Amp (max) / 4 x Li-SOCl2 (3.6V) AA / external solar panel
• Configuration via USB cable / downlink
• IP rating: IP42 (conformally coated electronics), do not expose to direct sunlight
• Operating Temp. / Humidity: -10…40 °C / 0…95 % RH (be kondensacijos)

The enLink Status-P transmits data using long range LoRa wireless which easily integrates with cloud services or on-site Systems.

• 3 channels pulse counter (S0 standard) and monitor of state (open / closed)
• With the transmit on Change of State enabled the unit operates as a standard pulse counter and also transmits a message when the state of the input changes from closed to open or open to closed
• The pulse counts for each channel are written to memory every 5 – 10 minutes
• Communication: LoRaWAN; frequency range: 863-870 MHz; up to 16 km range
• Measurement sending interval: 30 s to 3 hours or adaptive (triggered by change of state)
• 2 x Li-SOCl2 (3.6V) AA sized batteries ensure 3+ years of operation
• Configuration via USB cable / downlink
• Case IP40 protection (IP 67 on request)

• The battery or mains powered wireless M-Bus gateway B4 is highly configurable plug-and-play device used for collecting data from Wireless M-Bus meters / sensors and transmitting the data using LTE CAT-M1 and MQTT protocol
• Long range and high sensitivity internal (or external mounted) antennas
• To maximize the battery lifetime possible configuration to listen number of minutes, specific time during day, specific days and limit number of packets stored per meter / week / day / hour
• The gateway firmware can be upgraded remotely using MQTT
• B4 series gateway can be used with Lansen R4 series repeaters and transmit additional information (see datasheet)
• Configuration can be done with: Lansen Wireless M-BUS programming dongle together with our program, Lansen Configurator, other wireless M-BUS transmitters or remotely using the MQTT protocol
• Possible to activate 128 bit AES-key encryption
• Gateway suited for harsh environments, operating temperature: -30…+85 °C, protection class: IP40, IP65 and IP67
• IoT LTE M SIM card needed (acquired separately)

• Long-lasting stainless steel screw electrodes
• Measurement range: 7...20 % (-40...+125 °C)
• Resolution: 0,1 %
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Electrode cable: FEP, -50...+200 °C, 5/10/15 m
• Timber temperature compensation
• Electrode length: 15 / 25 mm
• Supply: 11...30 VDC
• Protection class: IP68

• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL (0...5 % vol) CH₄
• Resolution 0,1 % LEL (50 ppm) CH₄
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 20 / 50 % LEL CH₄

• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL CH₄
• Resolution 0,1 % LEL CH₄
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 20 / 50 % LEL CH₄
• Visual and acoustic alarms

• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL (0...5 % vol) CH₄
• Resolution 0,1 % LEL (50 ppm) CH₄
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor options

• Metal-oxide gas sensor
• Range: 0...100% LEL (0...5 %) CH₄
• Resolution: 0,1 % LEL (50 ppm) CH₄
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+70 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

TSM400-4-CP is a multi parameters sensor that supports MODBUS RTU protocol over the RS-485 interface. The sensor measures barometric pressure and CO2 concentration.. Suitable for environmental quality monitoring, indoor air, smart ventilation systems, restaurants and breweries CO2 level and CO2 leakage control.

• Changeable bitrate and other communication parameters
• Non-volatile memory for all setting
• CO2 measurements range: 400…5000 ppm
  • Accuracy: ± (40 ppm + 5 %)
  • Resolution: 1 ppm
  • Calibration: Automatic, if the sensor is exposed to fresh air for more than 30 minutes
• Pressure measurements range: 10…1200 hPa
  • Accuracy (min): ±1.5 (25°C, 750 hPa)
  • Accuracy (max): ±2.5 (-20 °C to + 85 °C, 300…1100 hPa)
  • Resolution: 1 hPa
• Operating temperature range: -20…+60°C
• Operating relative humidity range: 5…95% (non-condensing)
• Ingress protection: IP20
• Operating voltage range: 4,5…26 VDC

• Input: Modbus RTU – RS-485
• Output: 4-channel SPST relay contacts
• Rated relay load: 3 A at 250 Vac; 3 A at 30 Vdc
• Non-volatile memory to retain and restore relay states following power outages
• Watchdog functionality for communication loss
• Operating temperature / humidity: -20…+60 °C / 10…90 % (non-condensing)
• DIN rail mounting
• Power supply: 5…28 Vdc
• Warranty: 3 years

• Moisture reading range:
  • 4…18 % for Lint cotton
  • 6…20 % for Seed cotton
  • 12…30 % for Wool
  • 6…25 % Viscose / Rayon
• Large, custom display with auto backlight and modern light case for comfort use
• On-screen statistics for up to 100 readings saved to the meter (High, Low, Average, Standard Deviation)
• Bluetooth® connectivity to EDGE® app. timestamp and geotag, data export to .csv format, save unlimited readings, customize LED ranges
• Alarm set point - alerts to user-selected moisture level (Color-coded LEDs alerts – adjustable through EDGE® app)
• Internal calibration check
• “Low Batt” warning with audio
• Auto off timer.  Set to 1m, 4m, or 10m
• Compatible with existing Delmhorst prods and electrodes
• Power: 2x AA Alkaline battery (Working hours: 125…150)
• Temperature Correction Range: -18…+124 °C
• QR code on meter for easy access to support materials and meter registration
• Size: meter only 20,40 x 7.24 x 4.06 cm
• Weight: meter only: 218 gr
• 2-year warranty on manufacturer’s defects. Bonus warranty with on-line registration

• Moisture reading range:
  • Hay: 6…40 %
  • Hops: 8…23 % (FX-30)
  • Hemp: 7…34 % (FX-30)
  • Tobacco: 8…37 % (FX-30)
  • Brazil Nuts: 6…25 % (FX-30)
  • Dates: 6…25 % (FX-30)
• Large, custom display with auto backlight and modern light case for comfort use
• On-screen statistics for up to 100 readings saved to the meter (High, Low, Average, Standard Deviation)
• Bluetooth® connectivity to EDGE® app (FX-30). timestamp and geotag, data export to .csv format, save unlimited readings, customize LED ranges
• Alarm set point - alerts to user-selected moisture level (Color-coded LEDs alerts – adjustable through EDGE® app FX-30)
• Internal calibration check
• “Low Batt” warning with audio
• Auto off timer.  Set to 1m, 4m, or 10m
• Compatible with existing Delmhorst prods and electrodes
• Power: 2x AA Alkaline battery (Working hours: 125…150)
• Temperature Correction Range: -18…+124 °C
• QR code on meter for easy access to support materials and meter registration
• Size: meter only 20,40 x 7,24 x 4,06 cm
• Weight: meter only: 218 gm
• 2-year warranty on manufacturer’s defects. Bonus warranty with on-line registration

• Moisture reading range:
  • 4,3…18 % moisture for paper (kraft paper calibration)
  • 5…40 % for baled scrap paper (PX-30)
  • 0…100 reference scale for obtaining relative moisture levels on other materials without calibration (PX-30)
• Large, custom display with auto backlight and modern light case for comfort use
• On-screen statistics for up to 100 readings saved to the meter (High, Low, Average, Standard Deviation)
• Bluetooth® connectivity to EDGE® app (PX-30). timestamp and geotag, data export to .csv format, save unlimited readings, customize LED ranges
• Alarm set point - alerts to user-selected moisture level (Color-coded LEDs alerts – adjustable through EDGE® app PX-30)
• Internal calibration check
• “Low Batt” warning with audio
• Auto off timer.  Set to 1m, 4m, or 10m
• Compatible with existing Delmhorst prods and electrodes
• Power: 2x AA Alkaline battery (Working hours: 125…150)
• Temperature Correction Range: -18…+124 °C
• QR code on meter for easy access to support materials and meter registration
• Size: meter only 21.97 x 7.24 x 4.06 cm
• Weight: meter only: 218 / 244 gm
• 2-year warranty on manufacturer’s defects. Bonus warranty with on-line registration

The Triton ULTRA is a multifunctional vape sensor capable of detecting e-cigarette vapor, marijuana smoke (THC), smoking, loitering, the number of people, gunshots, loud noise, and glass breakage.

• Measured parameters: Temperature, humidity, PM1.0, PM2.5, PM10, TVOC, CO2, NO2, CO, HCHO, sound level
• Customizable instant alarms based on the situation: Email notification, loud alarm, lights, *integration
• Tamper protection: device vandalism, masking and covering
• Real-time monitoring of student loitering via live video streaming
• No license subscription required for use
• The sensor independently performs all measurements and detections and sends alarms itself
• *Integration capability with many third-party systems: TCP, HTTP, MQTT, RTSP
• Event logging of alarms in the device
• Communication: LAN, WiFi
• Operating environment temperature / humidity: 0...44 °C / 0...90% RH (non-condensing)
• Power supply: PoE+ (IEEE 802.3at Class 3 compliance). Ability to connect up to 4 devices in series

Multifunction astronomical digital clocks RDT-TPA2 are applied for switching on and off the lightning or other electrical receivers in accordance to sunset and sunrise.

• 80 programs (astronomical and annual), holiday mode, random mode
• Automatic summer/winter digital clockover
• Automatic transfer of weekdays
• Sealable cover of the front panel, easy setting by 4 buttons
• Backlighted LCD display (can be turned off)
• 10-year power reserve (internal lithium battery which can protect real time clock and all the settings when the electric power supply is off)
• Number and type of contacts: 2 CO (each channel can be assigned an individual program)
• Rated load: 16 A / 250 V AC
• Direct mounting on 35 mm rail mount acc. to EN 60715
• Compliance with standards EN 60730-1, EN 60730-2-7, Directive RoHS

• 10 time functions. With control signal and without additional signal
• 10 time ranges. Ranging from 0,1 sec. to 30 hours
• Operating voltage: 12…240 V AC / DC
• Operating power: < 4 VA
• Mounting on DIN rail
• Operating temperature: -20…+55 °C

The AUREGIS LJ-VD4M12 multi-zone floating, stainless steel level relay with standard M12 connector is designed for liquid level measurement and regulation.

• Connection connector: M12 (4 / 8 pins)
• Floats and float holders are customizable (on request)
• Connection thread: G3/4" or larger (on request)
• Switching power: 25 VA
• Switching voltage: 24 V AC/DC
• Process part operating temperature: -30...+105 °C
• Process part: Stainless steel AISI316L
• Protection class: IP65