Search

Laser digital light barriers D-LAS operate by using parallel visible laser light. These light barriers are ideal for positioning tasks.

LCC series laser edge detectors (laser copy counters) primarily are designed for detecting and counting magazines or single sheets in imbricated arrangement. Furthermore, these laser sensors are suitable for counting corrugated cardboard boxes, laminates, as well as for counting the number of folds of paper filters (air filters).

Laser fork light barriers F-LAS for complex problems. These light barriers are ideal for positioning tasks.

Fork light barriers of the FIA series primarily are chosen for high-precision trigger applications. They are frequently used in the stamping industry. Because of their compact and very sturdy design they are generally used in rough industry environments.

Laser miniature light barriers M-LAS have very small dimensions and work at distance up to 2 m. These light barriers are ideal for positioning and small object detection tasks.

An integrated polarization filter ensures protection against spurious triggering caused by reflecting objects.

The new leak meters LD 500/510 with integrated camera and leakage calculation are ideal to find even smallest leakages (0.1 l/min) easily even in far distances and calculate potential saving (€/year).

• 30 MEMS digital microphones for image of leaks
• Measuring distance: up to 6,5 m
• 3,5” TFT color display with touch panel
• Additional sensor input to measure: dew point, flow, pressure, and temperature (LD 510 only. See datasheet)
• Possibility to take photo of leaking parts
• Data transfer via USB to PC
• Easy data and work assignment with CS Leak Reporter cloud solution
• ISO 50001 report
• Power supply: 7,2 V lithium-ion battery (> 9 h continuous operation)
• Operating temperature: -5…+40 °C

• Input: standard 4...20 mA signal or capacitive Labkotec 3W probe
• Current output: 0/4...20 mA
• Switch outputs: 2 units
• LCD display
• Programmable using buttons
• ATEX certified
• Wall-mounted, IP65
• Supply: 230 VAC, 50/60 Hz

• High level detection
• Oil on water surface detection
• Sludge under water detection
• Designed for usage in separators, basins and tanks
• Version with GSM module available – for alarms and service reminders
• Acoustic and visual alarms
• 2 switch outputs
• ATEX certified
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

• For liquids limit level sensing on non-conductive (glass or plastic) gauge-pipes, tubes and tank walls
• Output: switch or PNP
• Sensitivity setting by means of magnetic pen
• LED indication
• Prismatic or planar electrode
• Versions with a fixed cable or a connector
• Supply: 6...30 VDC
• Operating temperature: -20...+80 °C
• Protection class: IP67

• Output: switch
• Application: level sensing for solids
• Supply: 24 VDC / 220 VAC
• Sensitivity setting: 3 positions
• Rotation speed: 1 per minute
• Operating temperature: -20...+70 °C
• Operating pressure: up to 0,8 bar
• Material: body – plastic, other component – stainless steel
• Protection class: IP65
• Weight: 1 kg

The enLink Status-VC transmits data using long range LoRa wireless which easily integrates with cloud services or on-site Systems.

• 0…20 mA, 0…10 V or resistance input
• 12 bit resolution
• Communication: LoRaWAN; frequency range: 863-870 MHz; up to 16 km range
• Measurement sending interval: 30 s to 3 hours
• 2 x Li-SOCl2 (3.6V) AA sized batteries ensure 3+ years of operation
• Configuration via USB cable / downlink
• Case IP40 protection (IP 67 on request)

The enLink Status-T transmits data using long range LoRa wireless which easily integrates with cloud services or on-site Systems.

• External sensor measurement range: -55…+125 °C
  • Accuracy: ± 0.5 °C (-10…+85 °C)
• Up to two probes (cable length: 1 m, others on request)
• Communication: LoRaWAN; frequency range: 863-870 MHz; up to 16 km range
• Measurement sending interval: 30 s to 3 hours or adaptive (triggered by alarm)
• 2 x Li-SOCl2 (3.6V) AA sized batteries ensure 3+ years of operation
• Configuration via USB cable / downlink
• Each sensor can be programmed individually for different alarm type: No alarming, High threshold alarm, Low threshold alarm, In band alarm, Out of band alarm
• Each alarm type has an individual alarm status message with the following parameters: Alarm status, Total number of alarm activations, Alarm duration
• Case IP40 protection (IP 67 on request)

• Wide gap between the two parts of sensor
• Protection class: IP65
• Max switching voltage: 100 V
• Max switching current: 0,5 A
• Cable length: 0,45 m
• Warranty: 3 years

• Temperature sensor AUREGIS TJ-2 with mineral insulation is inextricably connected to the cable
• It is designed for temperature measurement from -50°C to 550°C for RTD sensors Pt100, Pt1000 and from -50°C to 1150°C - for thermocouples
• Various sizes are available depending on customer requirements and drawings

TSM400-4-CP is a multi parameters sensor that supports MODBUS RTU protocol over the RS-485 interface. The sensor measures barometric pressure and CO2 concentration.. Suitable for environmental quality monitoring, indoor air, smart ventilation systems, restaurants and breweries CO2 level and CO2 leakage control.

• Changeable bitrate and other communication parameters
• Non-volatile memory for all setting
• CO2 measurements range: 400…5000 ppm
• Accuracy: ± (40 ppm + 5 %)
• Resolution: 1 ppm
• Calibration: Automatic, if the sensor is exposed to fresh air for more than 30 minutes
• Pressure measurements range: 10…1200 hPa
• Accuracy (min): ±1.5 (25°C, 750 hPa)
• Accuracy (max): ±2.5 (-20 °C to + 85 °C, 300…1100 hPa)
• Resolution: 1 hPa
• Operating temperature range: -20…+60°C
• Operating relative humidity range: 5…95% (non-condensing)
• Ingress protection: IP20
• Operating voltage range: 4,5…26 VDC

• Mounting brackets for easy installation of temperature sensors in measuring point
• UZ11 – full bracket
• UZ21 – bracket without body (only flange)
• Diameter: 15 / 22 / 32 mm
• Body and flange material: 1.0401 steel
• Sealing part material: Teflon / glass fiber
• High quality
• Complies with DIN EN 50 446

• Designed for air temperature and humidity sensors / transmitters
• Transmitter entirely protected inside the shield
• Prevention of condensation by downward sensor orientation
• Advanced weather protection by maximized top cover area (Ø 250 mm)
• Passively ventilated, requires no power
• Plate system permits air flow through the sensor
• ASA plastic is resistant to mechanical damage and UV radiation. It is anti-static and very stable over time.

The AUREGIS LJ-VD4M12 multi-zone floating, stainless steel level relay with standard M12 connector is designed for liquid level measurement and regulation.

• Connection connector: M12 (4 / 8 pins)
• Floats and float holders are customizable (on request)
• Connection thread: G3/4" or larger (on request)
• Switching power: 25 VA
• Switching voltage: 24 V AC/DC
• Process part operating temperature: -30...+105 °C
• Process part: Stainless steel AISI316L
• Protection class: IP65

• Multipoint float level switches AUREGIS LJ-VD for fluid level measurement and control
• Multipoint level switch LJ-VD main difference from LJ-V is that LJ-VD uses up to 3 floats instead of one, that ensures control and measuring in more than one level

• Multipoint float level switches LJ-VDT for fluid level measurement and control
• Multipoint level switch LJ-VDT main difference from LJ-VT is that LJ-VDT uses up to 3 floats instead of one, that ensures control and measuring in more than one level
• Float level switches have an integrated temperature sensor Pt100, Pt1000, Ni100, Ni120, Ni1000, NTC or PTC

• Multipoint temperature sensor AUREGIS TJ-D is designed for temperature measurement in different levels of measured environment
• Temperature sensors can be put in one casing or in separate casings
• When they are put in separate casings, measurement points can be spread in various places vertically and horizontally

• OilSET-1000 is designed for oil detection in separators, basins and tanks
• Easy to install, does not need calibration
• 2 switch outputs
• Ultrasonic sensor SET/S, 5 meter cable
• ATEX certified
• Wall-mounted, IP67
• Supply: 230 VAC, 50/60 Hz

• System consists of alarm device SET-1000 and fixed level vibration sensor SET/V
• For usage separators, basins and tanks
• Alarm device SET-1000 is a single-channel level switch
• When used with SET/V, SET-1000 alarms when set high level in tank is exceeded
• ATEX certified
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

• Grain temperature monitoring system software for PC
• Collects data from temperature cables GWSL 1100 and GWSL 2100 and spear temperature sensors GWTL-R
• Stores, visualizes data in charts
• Alarms
• Level indication

• RS-485 protocol temperature and humidity sensor
• Temperature measurement range: -20...+60 °C
• Accuracy: ±0,13 °C
• Resolution: 14 bits
• Very low current consumption
• Warranty: 3 years
• Connection: RJ-45

• Measuring range: -1…100 bar (see datasheet)
• Basic accuracy 0,5% of range
• Output: 4…20 mA
• Process connection: G 1/2“, G 1/2“, G 1/2“ Flush membrane, G 1/4“, G 1/4“, 1/2“ NPT, 1/4“ NPT, Tri-Clamp (Ø 50,5) Flush membrane
• Operating temperature: -20…+85 / 200 °C (see datasheet)
• Stainless steel housing and diaphragm material
• Protection class: IP67 / IP68

• Radar level meter GRLM-70 for continuous level measurement in liquids, mush and bulk-solid materials
• Outputs: 4...20 mA HART or RS-485 Modbus RTU
• Measurement depth: up to 40 m
• Universal usage, direct mounting into containers, silos, vessels, reservoirs, etc.
• LCD or OLED screen
• Linear measurement in non-conductive and in differently shaped containers
• Versions with stainless steel rod or rope electrodes
• Xi, Xit versions for usage in explosive areas
• Xd, XdT versions for usage in flammable dusts areas
• Supply: 18...30/33/36 VDC
• Protection class: IP67

The principle of operation of this instrument is based on a high frequency band, enabling a very accurate detection of the level of media with a small emitting angle.

• Radar level transmitter TLR designed for accurate level measurement in liquids and solids
• Reflection removal mode
• High frequency band: 77-81 GHz
• Measuring range: 10, 20, 30, 50 m
• Measuring accuracy: 2 mm
• Output signal: 4…20 mA, Modbus RS485, Hart protocol
• Bluetooth app for programming and settings
• Process temperature: -20…+200 °C*
• Process connection: Threads G 1 ½, G 1 ½ / 2, G 2 and customized flanges for all models*
• Process pressure: -1…+16 bar*
• Protection class: IP67

SI-COLO3 and SI-COLO4 series sensors operate by using 3-color-range method.

• Output relay: SPDT / 3A / 250VAC
• Application: level sensing for solids and powder
• Speed: 1 RPM
• Supply: 24 VDC or 220 VAC
• Operating temperature: - 10...+ 70 °C
• Operating pressure: - 0,6...+ 0,6 bar
• Protection class: IP66

• Sludge and sand detection
• Oil on water surface detection
• Designed for usage in separators, basins and tanks
• Easy to install, does not need calibration
• Reliable long-term se in harshest conditions
• Acoustic and visual alarms
• 2 switch outputs
• ATEX certified
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

• SandSet-1000 is designed for sludge and sand detection in separators, basins and tanks
• Easy to install, does not need calibration
• Reliable long-term se in harshest conditions
• Acoustic and visual alarms
• 2 switch outputs or output to LabkoNet remote monitoring system
• Ultrasonic sensor SET/S, 5 meter cable
• ATEX certified
• Wall-mounted, IP67
• Supply: 230 VAC, 50/60 Hz

• Flexible spears for grain temperature measurement
• Rigid construction
• Diameter: Ø8 mm
• Penetration depth: up to 12 m
• Digital temperature sensor
• Measurements are done using PC software or handheld reader GW-200
• Temperature spears and cables can be integrated into single system

• Special purpose temperature sensors (AUREGIS)

By means of three light barriers the SI-JET spray jet control systems check the density, symmetry, and cone angle of the spray jet. Choked or incorrectly set nozzles can thus be detected in time. Due to the integrated pressed air facility (at transmitter and receiver side of the fork) these systems are insensitive to dirt accumulation.

Submersible level sensor CLS–23S is developed as reliable and low-cost solution for limit level sensing of water (or water solutions) with miniature outer dimensions without the needs of any adjustment. The connection is done by means of two wires directly to a circuit with relay or to binary input of control system.

• For level detection of water in wells, boreholes or tanks
• Two-wire connection directly to the relay circuit or PLC input (current switch)
• Maximum immersion depth 100 m
• Stainless steel protection basket avoids mechanical damages of electrode
• Supply voltage: 6…30 VDC
• Protection class: IP68

• Measures ambient air temperature and humidity
• Integrates seamlessly into GrainWatch PC Software and displays the ambient weather conditions in real-time

• Temperature measurement range: -100…+300 °C
• Accuracy: ±0.07 °C (-10…+100 °C); ±0.15 °C (+101…+150 °C); otherwise ±0.4 °C
• Resolution: 0.01 °C
• Memory: 32 000 readings
• Power supply: battery 3.6V 1/2AA
• Operating temperature: -30…+70°C
• Protection class: IP65
• Wall mount available as optional accessory

• Temperature measurement range: -100…+300 °C
• Accuracy: ±0.07 °C (-10…+100 °C); ±0.15 °C (+101…+150 °C); otherwise ±0.4 °C
• Resolution: 0.01 °C
• Memory: 32 000 readings
• Power supply: battery 3.7V 1/2AA (Charging time: 1,5 h)
• Operating temperature: -30…+70°C
• Protection class: IP65
• Wall mount available as optional accessory

• Temperature sensor AUREGIS TJ-1-TE for temperature measurement from -40°C to 105°C
• Water-resistant – protection class IP68, fully cast in thermoplastic rubber
• Good properties in extreme freezing-melting conditions

• Temperature sensor TJ-B with pipe mounting
• Measuring range: -30 to 180, 250, 400°C
• Sensor type: RTD (Pt100, Pt1000), TC (K, J)
• Accuracy: A or B class / cl. 2
• Output: RTD (Pt100, Pt1000), TC (K, J), 4...20 mA, 4...20 mA +HART, 0...10 V, RS-485, IO-LINK
• Measuring part: Plate by pipe
  • Material: Stainless steel AISI304 (1.4301) 
• Connection head
  • Type: B
  • Protection class: IP65
• Extension tube
  • Material: Stainless steel AISI304 (1.4301) 
  • Diameter: Ø 10 mm
  • Length: 10; 50 mm, or according to request
• Straps: 2 pcs., not included
• Probe for process tube: Ø 15 - 40 mm

• Temperature sensor AUREGIS TJ-DIN for temperature measurement
• 35 mm DIN rail mounting
• Measuring range: -50...+70°C

• Temperature sensor AUREGIS TJ-H with hygienic – food process connection and special welded slot, designed for temperature measurement from -50 to +400 °C
• Temperature sensor construction specially designed for usage in food, pharmaceutical, water extraction and water purification, biotechnology and other industries
• Temperature sensor and slot are made of stainless steel
• Measuring range: from -50°C to 250°C, 400 °C

• Temperature sensor AUREGIS TJ-H with hygienic – food process connection and M12x1 4 pin connector
• Sensor type: RTD (Pt100, Pt1000), TC (K, J)
• Accuracy: A or B
• Measuring range: from -50°C to 400°C
• Sensor tube:
• Length: 100, 180, 200 mm
• Diameter: Ø6/8/10 mm
• Material: stainless steel
• Process connection tread: G1/2
• Transmitter output type: 4...20 mA, 4...20 +HART, 0-10 V, RS-485 other parameters acc. to requirement
• Cable connector: M12x1 4 pin
• Various sizes are available depending on customer requirements and drawings