Search

“idOil®” is an alarm system intended for monitoring liquid levels particularly in oil and sand separators. The system consists of the idOil control unit and the idOil sensors installed in the separator. The sensor cables can be extended with a cable connector or connection box. One to three digital idOil sensors of the same or different type can be connected to the control unit. The sensors can be used to monitor the following:

• High liquid level (idOil-LIQ high liquid level sensor)
• Oil layer detection (idOil-OIL oil sensor is for class IIA explosive liquids and idOil-OIL-Soil sensor is for class IIB explosive liquids)
• Sludge layer detection (idOil-SLU sludge sensor)

“idOil®” is an alarm system intended for monitoring liquid levels particularly in oil and sand separators. The system consists of the idOil control unit and the idOil sensors installed in the separator. The sensor cables can be extended with a cable connector or connection box. One to three digital idOil sensors of the same or different type can be connected to the control unit. The sensors can be used to monitor the following:

• High liquid level (idOil-LIQ high liquid level sensor)
• Oil layer detection (idOil-OIL oil sensor is for class IIA explosive liquids and idOil-OIL-Soil sensor is for class IIB explosive liquids)
• Sludge layer detection (idOil-SLU sludge sensor)

• Universal input (for standard signals and temperature sensors)
• Alarm output
• OLED display
• Configuration via miniUSB connector
• Supply: 24 VDC or 230 VDC / VAC
• IP65 protection class

Digital, programmable indicator N30H for DC voltage, current, with RS-485 interface.

• Device is designed for DC (bi-polar) voltage, current measurement
• LED indicator colors: red, green, yellow (for 3 input value ranges)
• Device is programmed with buttons or via RS-485 port
• 4 alarm inputs in 6 modes
• Measurement value conversion into analog signal 0/4...20 mA arba 0...10 V
• Minimal and maximal value storing for all measurements

• Measurement of parameters: voltage, current, active, reactive and apparent power, cosφ, tgφ, frequency, active, reactive and apparent energy, active power 15 minutes, voltage 10 minutes
• Current and voltage harmonics analysis up to 51st (measurements available via RS-485)
• Programmable input:
  • Current: 0…1 / 0…5A
  • Voltage: 0…100V / 0…230V / 0…400V
• Output:
  • Analog: 0/4...20 mA or 0...10 V
  • Relays: 1 or 4
  • Binary (OC)
• Digital output: RS-485 modbus (can be programmed through RS-485)
• Two-line LCD display
• Pulse output to measure energy consumption
• 4 alarm outputs with signaling on LED diodes, working in 7 different modes
• Conversion of any measured value into an analog signal 0/4...20 mA or 0...10V
• Protection grade: frontal side – IP65 / from terminal side – IP10
• Operating temperature: -25...23...55 °C

• Voltage measurement ± 600 V, current measurement via shunt, power, energy and capacity measurement of d.c. circuits
• 4 alarm outputs with signaling on led diodes, working in 7 different modes
• Analog outputs: 0/4...20 mA or 0...10 V
• Digital output: RS-485 / MODBUS RTU
• Two-line LCD display
• Protection grade: frontal side – IP65 / from terminal side – IP10
• Operating temperature: -25...23...55 °C

The CM22 provides essential video security features in a compact form. It is a 3MP (2048x1536) camera with 10 meters of IR light range, and includes people and vehicle detection for motion search and trajectory analysis. The CM22 camera, combined with the SV23 vape detector and air quality sensor, and powered by the Verkada Command cloud computing platform, creates a powerful vape prevention and logging system.

• 30, 60 and 90 days of data retention (256…768 GB) on hardware and cloud back-up. If the connection to the Command cloud is lost, data is saved onboard and synced once the internet connection is restored
• Easy to install: no NVR, DVR, servers or port forwarding, just PoE connection
• Alerts: Camera status (offline), motion detection, people detection, vehicle detection, crowd detection, line-crossing detection, loitering detection
• Privacy: live face blur, privacy regions and audit log
• Field of view: Horizontal: 95°; Vertical: 69°; Diagonal: 130°
• Operating temperature / humidity: -10…50 °C / 0…90 %
• Connection and power input: RJ-45, PoE (IEEE 802.3af type 1)
• Certifications: FCC, ICES, RCM, VCCI, CE, UKCA, EN 50155 railway compliance, UL/cUL/IEC 62368-1, NOM
• Warranty: 5 years

Interior protection from flooding sensor CZP-103R, designed for protection of various rooms (workshops, servers, communication modules, etc.) against flooding. The sensor activates when there is water between its electrodes. Can be used in drainages and rainfall wells for protection against basement flooding. LED indication.

• Flood protection
• Alarm and control
• Supply 12...24 VDC
• Isolated ~5 V electrode supply
• Low energy consumption
• Size 19 mm x 66 mm

• Applications of flue gas analyzer Si-Ca 230: boilers, burners, water heaters, gas and diesel engines, furnaces, industrial kilns, industrial heating systems, incinerators
• Detectable gases: O₂, CO (H₂ comp.), CO₂, NO, Low NO, NO₂, Low NO₂, NOx, Low NOx, SO₂, Low SO₂, CxHy (HC), H₂S
• Up to six gas sensors
• CO measurement up to 50 000 ppm
• Other measurement parameters: flue temp., air temp., differential temp., pressure / draft, excess air, combustion efficiency, combustion efficiency (condensation), stack gas velocity
• Color graphical touchscreen for control
• Communication: USB, Bluetooth (mobile App), remote printer
• Measurement storage: 2000 data points + smartphone and PC
• Predictive maintenance with estimated sensor life and calibration reminders
• Protection class: IP42
• Power supply: Rechargeable battery, Li-Ion 5100 mA/h 3.6 V (8 hours working time)
• Operating temperature: -5…+45 °C
• Sensor protection by pump stopping

The Internal IBC Heater is a unique approach to heating viscous foodstuffs and chemicals within IBC Containers. It is designed to protect sensitive products, such as syrups, honey, treacle, molasses, fats and other viscous products that are difficult to process. Most products can be batched within a relatively short time, increasing efficiency and reducing down time.

Technical specifications:

• Designed for insertion into 1000 litre cubic IBC but will also fit inside most IBC configurations.
• Adjustable temperature range from 0°C to 70°C using an easy to use controller on the top of the heater.
• 230/240 Volts - up to 2.4kW power output.
• Finned, food safe heating element that is inserted into the IBC, thereby heating the contents directly.
• Fast batching ability. Unique thermodynamic core that gives even temperature distribution along the heating extrusion,
• Preventing thermal damage to the liquid contents of the IBC.
• Non-stick industrial strength Xylon coating for easy washdown.
• Carefully designed low Watt density to protect sensitive products.
• Lightweight with stainless steel handles for easy insertion and extraction.
• Even temperature distribution along the length of the heating extrusion.
• Colored LED for power cycle and status indication.
• 16 Amp blue industrial power plug.
• Protective sleeve between the base of the control unit and the neck of the IBC to prevent ingress of contaminants.
• Robust Construction:
• IP67-rated body with potentiometer control mounted under protective see-through cover.
• The product is sealed to ensure that all the connections and components are waterproof.
• Robust IP67-rated aluminum case.
• Long life heating elements.

• Ethernet connection
• Digital inputs: 2
• 1-Wire input (up to 2 sensors)
• Analog inputs: 2 (0...60 VDC)
• Relay outputs: 2 (NO/NC)
• IP watchdog function
• Webserver
• SNMP alarms
• VLAN and MAC address filtering
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...14 VDC

Analog laser light barriers and their electronic control units. Round or rectangular cross-sections are used for measuring, positioning or detection of objects starting from 0,01 mm (i.e. threads) from great distance (up to 100 m, depending on model).

These sensors should be used where high positioning accuracy is required.

C-LAS compact laser light barriers are ideally suited for positioning tasks.

Laser digital light barriers D-LAS operate by using parallel visible laser light. These light barriers are ideal for positioning tasks.

Laser fork light barriers F-LAS for complex problems. These light barriers are ideal for positioning tasks.

Fork light barriers of the FIA series primarily are chosen for high-precision trigger applications. They are frequently used in the stamping industry. Because of their compact and very sturdy design they are generally used in rough industry environments.

Laser miniature light barriers M-LAS have very small dimensions and work at distance up to 2 m. These light barriers are ideal for positioning and small object detection tasks.

System is designed to measure width of planar products on conveyor belt. System can be used as a separate module or integrated into production line for process control. It enables to compensate conveyor belt unevenness even if shaft imbalance to axle is present, not affecting measurement accuracy.

If there is no way to measure the product from both sides (i.e. on conveyor belt), one-sided system can be used. In this way the accuracy will depend on evenness of product movement.

Can be conducted without stopping the belt:

• Measure product width
• Detect product curvature

Additional functions:

• Count products
• Measure downtime
• Control processes which influence product width

System consists of following:

• Sensor Instruments high accuracy laser distance sensors
• PLC
• HMI or computer

An integrated polarization filter ensures protection against spurious triggering caused by reflecting objects.

• Adjustable start time delay: 0...16 s
• Operating resistance: 0...100 kΩ
• Mounting on DIN rail
• Operating temperature: -10...50 °C
• Supply: 117/230/400 VAC
• Protection class: IP20

• Three versions by sensitivity: NS (standard), AS (high), SR (adjustable)
• Operating resistance: 5,6 kΩ (NS) 70 kΩ (AS) 0...100 kΩ (SR)
• Mounting on DIN rail
• Operating temperature: -10...50 °C
• Supply: 117/230/400 VAC
• Protection class: IP20

• Incremental encoder output: A, B   /   A, B, Z   /   A, /A, B, /B   /   A, B, Z, /A, /B, /Z
• Resolution: 5 / 10 / 25 / 50 μm
• Magnetic measurement (contactless, non-friction system)
• Vibration-resistant
• Cable length: 3 / 5 / 8 / 10 m (optionally 5...50 m)
• Supply: 10...30 VDC / 5 VDC
• Operating temperature: -25...+85 °C
• Protection class: IP67

• Incremental encoder output: A, B   /   A, B, Z   /   A, /A, B, /B   /   A, B, Z, /A, /B, /Z
• Resolution: 5 / 10 / 25 / 50 μm
• Portable reference point
• Stroke values up to 2000 mm
• Vibration-resistant
• Cable length: 3 / 5 / 8 / 10 m (optionally 5...50 m)
• Supply: 10...30 VDC / 5 VDC
• Operating temperature: -25...+85 °C
• Protection class: IP65

Linear encoder MLS110. With cable connection.

Technical specifications

• Wide range of available resolution (up to 1 µm)
• Protection class IP67
• Resistant to humidity
• Aluminum casing
• Incremental outputs A, /A, B, /B and Z
• Output “push-pull”, TTL or RS-422
• Supply 5 VDC or 10...30 VDC

Linear encoder MLS110. With spiral connection.

Technical specifications

• Wide range of available resolution (up to 1 µm)
• Protection class IP67
• Resistant to humidity
• Aluminum casing
• Incremental outputs A, /A, B, /B and Z
• Output “push-pull”, TTL or RS-422
• Supply 5 VDC or 10...30 VDC

Linear encoder MLS120.

Technical specifications

• Casing integrated into slider
• Wide range of available resolution (up to 1 µm)
• Protection class IP67
• Resistant to humidity
• Aluminum casing
• Incremental outputs A, /A, B, /B and Z
• Output “push-pull”, TTL or RS-422
• Supply 5 VDC or 10...30 VDC

Linear encoder MLS130. Very small size.

Technical specifications

• Very small measuring head (in metal enclosure)
• Wide range of available resolution (up to 1 µm)
• Protection class IP67
• Resistant to humidity
• Aluminum casing
• Incremental outputs A, /A, B, /B and Z
• Output “push-pull”, TTL or RS-422
• Supply 5 VDC or 10...30 VDC

Linear encoder MLS210. With spiral connection and slider joints.

Technical specifications

• Protection class IP67
• Twin sliders
• Resistant to humidity
• Aluminum casing
• Incremental outputs A, /A, B, /B and Z
• Output “push-pull”, TTL or RS-422
• Supply 5 VDC or 10...30 VDC

Linear encoder MLS210. With spiral connection.

Technical specifications

• Protection class IP67
• Resistant to humidity
• Aluminum casing
• Incremental outputs A, /A, B, /B and Z
• Output “push-pull”, TTL or RS-422
• Supply 5 VDC or 10...30 VDC

• SpotScan is a linear scanning add-on for RAYTEK, IRCON noncontact IR thermometers ENDURANCE, Marathon MM, Modline 5 and Modline 7

• SpotScan is designed to broaden the capabilities of noncontact IR thermometers while scanning measured surface linearly thus measuring wider than one dot target area

The enLink IAQ Vape transmits data using long range LoRa wireless which easily integrates with cloud services or on-site Systems.

• Sensed parameters: Temperature, Relative humidity, VOC, CO2, Particles PM (0.1, 0.3, 0.5, 1.0, 2.5, 5.0 & 10), Barometric pressure, Sound*, Ozone**, Arsine*, Formaldehyde*, Methyl Mercaptan*, Chlorine*, Carbon Monoxide*, Ethylene Oxide*, Hydrogen*, Hydrogen Sulphide*, Hydrogen Cyanide*, Ammonia*, Nitrogen Dioxide*, Oxygen*, Odorous gases*, Phosphine*, Sulphur Dioxide*
• Distinguishes between vaping and smoke and counts the number of detections
• Communication: LoRaWAN; frequency range: 863-870 MHz; up to 16 km range
• Measurement sending interval: 30 s to 3 hours or adaptive (triggered by vape or smoke)
• Power suplly: 12…24V V DC, 0.15 Amp (max)
• Configuration via USB cable / downlink
• Operating Temp. / Humidity: 0…40 °C / 0…95 % RH

The enLink OAQ Vape transmits data using long range LoRa wireless which easily integrates with cloud services or on-site Systems.

• Sensed parameters: Temperature, Relative humidity, VOC, CO2, Particles PM (1.0, 2.5, 4.0 & 10), Barometric pressure, Ozone**, Arsine*, Formaldehyde*, Methyl Mercaptan*, Chlorine*, Carbon Monoxide*, Ethylene Oxide*, Hydrogen*, Hydrogen Sulphide*, Hydrogen Cyanide*, Ammonia*, Nitrogen Dioxide*, Oxygen*, Odorous gases*, Phosphine*, Sulphur Dioxide*
• Communication: LoRaWAN; frequency range: 863-870 MHz; up to 16 km range
• Measurement sending interval: 30 s to 3 hours
• Power supply: 12…24V V DC, 0.15 Amp (max) / 4 x Li-SOCl2 (3.6V) AA / external solar panel
• Configuration via USB cable / downlink
• IP rating: IP42 (conformally coated electronics), do not expose to direct sunlight
• Operating Temp. / Humidity: -10…40 °C / 0…95 % RH (be kondensacijos)

The enLink Status-P transmits data using long range LoRa wireless which easily integrates with cloud services or on-site Systems.

• 3 channels pulse counter (S0 standard) and monitor of state (open / closed)
• With the transmit on Change of State enabled the unit operates as a standard pulse counter and also transmits a message when the state of the input changes from closed to open or open to closed
• The pulse counts for each channel are written to memory every 5 – 10 minutes
• Communication: LoRaWAN; frequency range: 863-870 MHz; up to 16 km range
• Measurement sending interval: 30 s to 3 hours or adaptive (triggered by change of state)
• 2 x Li-SOCl2 (3.6V) AA sized batteries ensure 3+ years of operation
• Configuration via USB cable / downlink
• Case IP40 protection (IP 67 on request)

• The battery or mains powered wireless M-Bus gateway B4 is highly configurable plug-and-play device used for collecting data from Wireless M-Bus meters / sensors and transmitting the data using LTE CAT-M1 and MQTT protocol
• Long range and high sensitivity internal (or external mounted) antennas
• To maximize the battery lifetime possible configuration to listen number of minutes, specific time during day, specific days and limit number of packets stored per meter / week / day / hour
• The gateway firmware can be upgraded remotely using MQTT
• B4 series gateway can be used with Lansen R4 series repeaters and transmit additional information (see datasheet)
• Configuration can be done with: Lansen Wireless M-BUS programming dongle together with our program, Lansen Configurator, other wireless M-BUS transmitters or remotely using the MQTT protocol
• Possible to activate 128 bit AES-key encryption
• Gateway suited for harsh environments, operating temperature: -30…+85 °C, protection class: IP40, IP65 and IP67
• IoT LTE M SIM card needed (acquired separately)

• Long-lasting stainless steel screw electrodes
• Measurement range: 7...20 % (-40...+125 °C)
• Resolution: 0,1 %
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Electrode cable: FEP, -50...+200 °C, 5/10/15 m
• Timber temperature compensation
• Electrode length: 15 / 25 mm
• Supply: 11...30 VDC
• Protection class: IP68

• The system is designed to monitor pressure and flow rate of medical gasses
• Information is gathered from pressure and flow rate transmitters and conveyed into the controllers which transfer the data into a PC via RS-485 interface (MODBUS protocol)
• SCADA software enables the visualization of the process
• Data is logged annd represented on the computer screen
• Values can also be represented in graphs

• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL (0...5 % vol) CH₄
• Resolution 0,1 % LEL (50 ppm) CH₄
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 20 / 50 % LEL CH₄

• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL CH₄
• Resolution 0,1 % LEL CH₄
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 20 / 50 % LEL CH₄
• Visual and acoustic alarms

• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL (0...5 % vol) CH₄
• Resolution 0,1 % LEL (50 ppm) CH₄
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor options

• Metal-oxide gas sensor
• Range: 0...100% LEL (0...5 %) CH₄
• Resolution: 0,1 % LEL (50 ppm) CH₄
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+70 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

TSM400-4-CP is a multi parameters sensor that supports MODBUS RTU protocol over the RS-485 interface. The sensor measures barometric pressure and CO2 concentration.. Suitable for environmental quality monitoring, indoor air, smart ventilation systems, restaurants and breweries CO2 level and CO2 leakage control.

• Changeable bitrate and other communication parameters
• Non-volatile memory for all setting
• CO2 measurements range: 400…5000 ppm
• Accuracy: ± (40 ppm + 5 %)
• Resolution: 1 ppm
• Calibration: Automatic, if the sensor is exposed to fresh air for more than 30 minutes
• Pressure measurements range: 10…1200 hPa
• Accuracy (min): ±1.5 (25°C, 750 hPa)
• Accuracy (max): ±2.5 (-20 °C to + 85 °C, 300…1100 hPa)
• Resolution: 1 hPa
• Operating temperature range: -20…+60°C
• Operating relative humidity range: 5…95% (non-condensing)
• Ingress protection: IP20
• Operating voltage range: 4,5…26 VDC

• Input: Modbus RTU – RS-485
• Output: 4-channel SPST relay contacts
• Rated relay load: 3 A at 250 Vac; 3 A at 30 Vdc
• Non-volatile memory to retain and restore relay states following power outages
• Watchdog functionality for communication loss
• Operating temperature / humidity: -20…+60 °C / 10…90 % (non-condensing)
• DIN rail mounting
• Power supply: 5…28 Vdc
• Warranty: 3 years

• 4 analog inputs (standard signals, RTD, thermocouple)
• RS-485 Modbus output (Slave mode)
• 2 alarm outputs
• Galvanic isolation of inputs (2 from other 2)
• Programmable individual characteristics, mathematical functions
• Programmable time counters
• Rail-mounted

Analog signal / RS-485 converter SM1.

Analog signal / RS-485 converter SM2.

2-channel binary input converter SM3 with RS-485/232 interface. Modbus RTU and ASCII.

8 binary output converter SM4 with RS-485/232 interface. Modbus RTU and ASCII.

8-channel binary input converter SM5 with RS-485/232 interface. Modbus RTU and ASCII.

• Moisture reading range:
  • 4…18 % for Lint cotton
  • 6…20 % for Seed cotton
  • 12…30 % for Wool
  • 6…25 % Viscose / Rayon
• Large, custom display with auto backlight and modern light case for comfort use
• On-screen statistics for up to 100 readings saved to the meter (High, Low, Average, Standard Deviation)
• Bluetooth® connectivity to EDGE® app. timestamp and geotag, data export to .csv format, save unlimited readings, customize LED ranges
• Alarm set point - alerts to user-selected moisture level (Color-coded LEDs alerts – adjustable through EDGE® app)
• Internal calibration check
• “Low Batt” warning with audio
• Auto off timer.  Set to 1m, 4m, or 10m
• Compatible with existing Delmhorst prods and electrodes
• Power: 2x AA Alkaline battery (Working hours: 125…150)
• Temperature Correction Range: -18…+124 °C
• QR code on meter for easy access to support materials and meter registration
• Size: meter only 20,40 x 7.24 x 4.06 cm
• Weight: meter only: 218 gr
• 2-year warranty on manufacturer’s defects. Bonus warranty with on-line registration