Search

• Supports devices: NAT 8252, NAH 8254, NAR 8258, ECL 8439
• Fast and easy operation via Android app “Sensor Master Communicator SMC”
• Read out of sensor data
• Parametrization of switich points on NAx pressure switches
• Measuring range adjustment on submersible pressure transmitter ECL
• Reset pressure measurement instruments to factory settings
• Ambient temperature: 0...40 °C
• Supply: 5 V (USB)
• Communication: Bluetooth Low Energy

• 2 analog outputs (operating simultaneously):
  1. Current 4...20 mA or 0...20 mA (active output, cannot be supplied in two-wire current loop);
  2. Voltage 0...10 V.
• Soft start/stop (ramping) or a triangular wave generator triggered manually or automatically after switching power on
• 7-segment LED display with adjustable brightness
• Optional RS485/RS232 serial interface (galvanically isolated, MODBUS-RTU communication protocol)
• Password protection
• High accuracy and immunity to interference
• Supply: 230 VAC or 24 VAC/VDC
• Panel housing 96 x 48 x 79 mm
• Protection: IP65 (front) / IP20 (back)

• Thermosetting cabinet with double doors. The cabinet dimension: 600 x 500 mm (max 2x 5,5 kW) or 800 x 600 (max 2x 7,5 kW; ... max 2x 22 kW).
• Plinth or foundation for fixing the cabinet.
• PLC controller with a display that changes the backlight depending on operating mode.
• Program saved in the controller and on the SD card, enabling transferring the program to another controller in the event of a failure.
• Router equipped with a 2G / 3G / 4G / LTE modem, 1 LAN 10 / 100 Mb/s port and radio module in the 802.11 b/g/n standard, supporting MIMO 2x2.

Destined for direct (up to 63A) and indirect measurements in 3 phase 4 wire/3 wire balanced and unbalanced systems. For direct (up to 63A) and indirect measurement (x/1A or x/5A). Indications considering values of programmed ratios.

Reactive power controller RMB-10S. The device is designed for reactive power compensation battery control. Version with 6 switch outputs is available.

• Data visualization in WWW server
• Convenient login from various devices (PC, tablet, phone)
• Readout of up to 2500 values of slave devices (up to 100 devices, 25 registers each)
• 1 GB Flash memory
• E-mail messages in case of alarm occurrence
• 2 alarm outputs or 2 binary inputs
• RS-232, RS-485, USB, Ethernet, RTC

• The MQTT protocol is ideal for communication in distributed acquisition systems data (IoT applications)
• Data visualization in WWW server
• Convenient login from various devices (PC, tablet, phone)
• Readout of up to 2500 values of slave devices (up to 100 devices, 25 registers each)
• 8 GB Flash memory
• Real time clock (RTC)
• 2 alarm outputs or 2 binary inputs
• RS-232, RS-485, USB, Ethernet

SI-COLO3 and SI-COLO4 series sensors operate by using 3-color-range method.

• For R-12, R-123, R-125, R134a, R143, R-22, R404a, R-407c, R-410a, etc.
• Default calibration R-404a
• Range 0...1000 ppm
• Resolution 1 ppm
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485

• For R-12, R-123, R-125, R134a, R143, R-22, R404a, R-407c, R-410a, etc.
• Default calibration R-404a
• Long-life MOS sensor
• Range 0...1000 ppm
• Resolution 1 ppm
• Outputs 2 x 4...20 mA / 0...10 V, RS-485

• MOS gas sensor
• Detected gases: R-12, R-123, R-125, R-134a, R-143, R-22, R-404a, R-407c, R-410a, R1234yf, etc.
• Standard calibration: R-404a
• Range: 0...1000 ppm HFC
• Resolution: 1 ppm HFC
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -30...+60 °C
• Supply: 11..30 VDC / 24 VAC arba 90...265 VAC

• Ethernet connection
• Digital inputs: 2
• 1-Wire input (up to 2 sensors)
• Analog inputs: 2 (0...60 VDC)
• Relay outputs: 2 (NO/NC)
• Webserver
• HTTP and XML API commands
• E-mail alarms, SMTP, SNMP
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...14 VDC

• TC Monitor is remote monitoring software that collects data and controls your TCG (GSM) and TCW (Ethernet) Teracom I/O modules
• User-friendly WEB interface for easy configuration and control
• Free version let monitor up to 10 items
• The monitored parameters can be sensors, digital and analog inputs and relay outputs
• Graphical and Data dashboards for better visualization
• TC Monitor allows flexible administration of user accounts
• Easy access to the raw data tables, export in .csv format
• Alarm notifications
• User activities log

• Ethernet connection
• Digital inputs: 2
• Relay outputs: 2 (NO/NC)
• Webserver
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...14 VDC

The PD9W is an industrial RS-232 / RS-485 to WiFi and Ethernet converter.

• Communication interfaces: 1x RS485, 1 x RS232, 1x Ethernet and WiFi (802.11b/g/n)
• Modes: AP, STA, AP + STA, AP + LAN, AP + WAN, Route and Bridge
• Work modes: transparent transmission mode, serial port command mode, HTTP Client mode, Modbus TCP<=>Modbus RTU mode and AT command mode
• Configuration the parameters via the WEB server
• RS232 port for RTS/CTS signals
• Hardware Watchdog, Heartbeat
• Electrostatic protection 15 / 8 kV
• Power supply: 5…36 V dc

PD9-Modbus RS485 to Ethernet converter can realize bidirectional transparent transmission between RS485 and Ethernet. It carries ARM processor, low power, fast speed, high stability. Via web-page or software, Rs-485 to Ethernet Converter can realize serial data and TCP/IP data package transparent transmission.

• Communication interfaces: 1x RS485, 1x Ethernet WAN/LAN
• Easy configuration the parameters via the webpage or set-up software
• Compact size, DIN rail mount
• Working mode: TCP server, TCP client, UDP server, UDP client
• Modbus RTU to TCP conversion, Modbus Polling
• DHCP support, IP dynamic or static
• Watchdog function
• Working temperature: -40…85°C
• Power supply: 5…36 V dc

• Digital input: 4 ch. pulse
• Independent modes: OPEN / CLOSED (“Dry contact”) and COUNTER (S0 standard)
• Output: RS-485 MODBUS RTU interface
• Non-volatile memory for counters storage and settings
• Galvanically isolated inputs
• DIN rail mounting
• Protection class: IP40 (connections IP20)
• Operating temperature range: -20…+60 °C
• Power supply: 5…28 VDC

• Modbus Slave over RS-485
• Modbus RTU / Modbus ASCII protocols
• Communication parameters configurable by dip-switches
• Watch-dog alarm
• Remotely configurable
• 3-way galvanic isolation (1500 VAC)
• High accuracy
• Mounting on DIN rail - EN-50022 compliance

• Ethernet 10/100 Base-T interface
• Modbus TCP server
• Webserver for configuration of device and representation of actual input values
• Galvanic isolation on all the ways (1500 VAC)
• Remotely configured
• LED indication
• EMC compliance
• DIN rail mounting

They are used to regulate the power delivered to the receiver, where this power is proportional to the input control signal. They are used in automation control systems where smooth control of receiver power is required for resistive or resistive-inductive loads. Typical applications for power controllers: heaters, industrial furnaces (annealing, quenching, drying, etc.), dryers, plastics processing equipment, industrial sealing machines, glass production industry, industrial heating systems (matting and lining of pipelines), load transformers.

• Single-phase power controller (phase angle load control)
• Control input: DC voltage 0...10 V DC (RSR92-..V..) or current 4...20 mA (RSR92-..I..)
• SCR output (thyristors)
• Load current 25...80 A
• Max. load voltage 280, 530 V AC (single-phase)
• Dielectric strength 4 000 Vrms (opto-isolation)
• MOV protection (built-in varistor)
• Mounting on panel or on heatsinks
• Recognitions, certifications, directives: RoHS, REACH, CE, EAC

• Relay output
• Smoke sensitivity complies with EN 54-7:2000+ A1:2002
• Digital signal processing
• Very low current consumption
• Excellent long-term stability
• LED indication
• Supply: 10...30 VDC
• Warranty: 3 years

Solenoid valve SCG238 (Asco).

• Normally closed, does not produce hydraulic shocks, pilot
• Solenoid valve complies to all associated EC directives
• For hot and cold water (on/off function)
• Self-cleaning breather guarantees reliable function

By means of three light barriers the SI-JET spray jet control systems check the density, symmetry, and cone angle of the spray jet. Choked or incorrectly set nozzles can thus be detected in time. Due to the integrated pressed air facility (at transmitter and receiver side of the fork) these systems are insensitive to dirt accumulation.

• Universal datalogger with 4 hardware MiniDIN inputs for connecting temperature and humidity probes.
• Multilogger can be installed permanently to Ethernet network or work as a portable device.
• Measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.
• Calibration certificate included.
• 3 rechargeable AA batteries with a power adapter, wall holder and USB cable are included in the delivery.
• Temperature (Pt1000) and humidity probes are ordered separately. Cable length – 1, 2, 5, 10, 15 meters.
• Open collector transistor alarm output.

• Universal datalogger with 3 hardware MiniDIN inputs for connecting temperature and humidity probes and 1 for external CO2 sensor.
• Multilogger can be installed permanently to Ethernet network or work as a portable device.
• Measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.
• Calibration certificate included.
• External CO2 sensor, 3 rechargeable AA batteries with a power adapter, wall holder and USB cable are included in the delivery.
• Temperature (Pt1000) and humidity probes are ordered separately. Cable length – 1, 2, 5, 10, 15 meters.
• Open collector transistor alarm output.

• Universal datalogger with 4 inputs, 2 for voltage, current, logic and pulse signals and 2 for connecting temperature and humidity probes.
• Measures carbon dioxide (CO2) using the integrated sensor.
• Measures barometric pressure using the integrated sensor.
• Multilogger can be installed permanently to Ethernet network or work as a portable device.
• Measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.
• Calibration certificate included.
• 3 rechargeable AA batteries with a power adapter, wall holder and USB cable are included in the delivery.
• Temperature (Pt1000) and humidity probes are ordered separately. Cable length – 1, 2, 5, 10, 15 meters.
• Open collector transistor alarm output.

• Universal datalogger with 4 inputs, 2 for voltage, current, logic and pulse signals and 2 for connecting temperature and humidity probes.
• Measures carbon dioxide (CO2) using the integrated sensor.
• Multilogger can be installed permanently to Ethernet network or work as a portable device.
• Measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.
• Calibration certificate included.
• 3 rechargeable AA batteries with a power adapter, wall holder and USB cable are included in the delivery.
• Temperature (Pt1000) and humidity probes are ordered separately. Cable length – 1, 2, 5, 10, 15 meters.
• Open collector transistor alarm output.

• Universal datalogger with 4 inputs, 2 for voltage, current, logic and pulse signals and 2 for connecting temperature and humidity probes.
• Measures barometric pressure using the integrated sensor.
• Multilogger can be installed permanently to Ethernet network or work as a portable device.
• Measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.
• Calibration certificate included.
• 3 rechargeable AA batteries with a power adapter, wall holder and USB cable are included in the delivery.
• Temperature (Pt1000) and humidity probes are ordered separately. Cable length – 1, 2, 5, 10, 15 meters.
• Open collector transistor alarm output.

• Universal datalogger with 4 inputs, 2 for voltage, current, logic and pulse signals and 2 for connecting temperature and humidity probes.
• Multilogger can be installed permanently to Ethernet network or work as a portable device.
• Measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.
• Calibration certificate included.
• 3 rechargeable AA batteries with a power adapter, wall holder and USB cable are included in the delivery.
• Temperature (Pt1000) and humidity probes are ordered separately. Cable length – 1, 2, 5, 10, 15 meters.
• Open collector transistor alarm output.

• Universal datalogger with 4 hardware MiniDIN inputs, 2 for thermocouples K, J, S, B, T, N and 2 for connecting temperature and humidity probes.
• Cold junction compensation (CJC).
• Sensors of physical quantities with bipolar voltage output can also be connected. Two voltage ranges: -18...+18 mV and -60...+140 mV.
• Multilogger can be installed permanently to Ethernet network or work as a portable device.
• Measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.
• Calibration certificate included.
• 3 rechargeable AA batteries with a power adapter, wall holder and USB cable are included in the delivery.
• Temperature (Pt1000) and humidity probes are ordered separately. Cable length – 1, 2, 5, 10, 15 meters.
• Open collector transistor alarm output.

• Universal datalogger with 4 hardware MiniDIN inputs for thermocouples K, J, S, B, T, N.
• Cold junction compensation (CJC).
• Sensors of physical quantities with bipolar voltage output can also be connected. Two voltage ranges: -18...+18 mV and -60...+140 mV.
• Multilogger can be installed permanently to Ethernet network or work as a portable device.
• Measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.
• Calibration certificate included.
• 3 rechargeable AA batteries with a power adapter, wall holder and USB cable are included in the delivery.
• Thermocouples are ordered separately.
• Open collector transistor alarm output.

• Memory: up to 70 000 records
• Up to 8 1-Wire and Modbus RTU sensors support
• Temperature, humidity and dew point graphical representation
• Modbus TCP/IP support
• XML/JSON and HTTP API commands
• Webserver
• E-mail alarms (up to 5 recipients)
• Operating temperature: -20...+55 °C
• Warranty: 3 years
• Supply: 10...32 VDC

• Measures ambient temperature, humidity
• Calculates dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
• Measuring ranges: -30...+80 °C, 0...100 %RH
• Output: Ethernet
• Optional connection to WiFi network via tiny wireless router TL-WIFI
• Webserver
• Measurement interval: 2 s
• Alarm protocols: E-mail, SNMP Trap, Syslog
• Supply: 9...30 VDC
• Protection class: IP30
• Calibration certificate included

• Measures ambient temperature, humidity
• Calculates dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
• Measuring ranges: -30...+105 °C, 0...100 %RH
• External sensor cable length: 1 / 2 / 4 m
• Output: Ethernet
• Optional connection to WiFi network via tiny wireless router TL-WIFI
• Webserver
• Measurement interval: 2 s
• Alarm protocols: E-mail, SNMP Trap, Syslog
• Supply: 9...30 VDC
• Protection class: IP30 for device, IP40 for sensor
• Calibration certificate included

• Temperature measurement range (depends on probe type): -30...+80 °C / -50...+125 °C / 0...+50 °C
• Humidity measurement range: 0...100 %
• 4 channels: 4 x external temperature probes or 4 x external temperature and humidity probes
• Output: Ethernet
• Measurement interval: 2 s
• Communication protocols: WWW, Modbus TCP, SNMPv1, SOAP, XML
• Alarm protocols: E-mail, SNMP Trap, Syslog
• Included calibration certificate
• Supply: 5 VDC
• Protection class: IP30

• Measures air temperature, humidity
• Calculates dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
• Measurement ranges: -30...+80 °C / 0...100 %RH
• Operating temperature: -30...+60 °C
• Ex marking: EX II 3G Ex ic IIC T6 Gc
• Output: 4...20 mA, galvanically isolated
• Adjustable by PC
• Supply: 9...30 VDC
• Calibration certificate included

• Measures air temperature, humidity in ducts
• Calculates dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
• Measurement ranges: -30...105 °C / 0...100 %RH
• Operating temperature: -30...+60 °C
• Ex marking: EX II 3G Ex ic IIC T6 Gc
• Output: 4...20 mA, galvanically isolated
• External sensor cable length: 1 / 2 / 4 m
• Adjustable by PC
• Supply: 9...30 VDC
• Calibration certificate included

Temperature and humidity transmitter with 4-20mA output.

• Measures air temperature, humidity in ducts
• Calculates dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
• Measurement ranges: -30...125 °C / 0...100 %RH
• Operating temperature: -30...+60 °C
• Ex marking: EX II 3G Ex ic IIC T6 Gc
• Output: 4...20 mA, galvanically isolated
• Adjustable by PC
• Supply: 9...30 VDC
• Calibration certificate included

• Selectable double set point
• Selectable TC / Pt100 input (order option)
• Output: relay (control or alarm) and SSR (control)
• PID control
• Self-tuning feature
• Soft-start function
• Offset feature for input
• Heating/cooling control
• Manual control feature

• Two set points
• Input: TC (J, K, T, R, S) / RTD (Pt100)
• Control output: relay or SSR
• Auxiliary output: relay
• PID / ON-OFF control
• Auto-Tuning / Self-Tuning
• Alarm modes: deviation, absolute
• Heating / cooling control
• 4+4 digits high contrast LED display
• Supply: 85…270V AC / DC
• Ambient temperature: 0…50 °C

• Indoor temperature controller of TR series (S+S Regeltechnik, Germany)
• TR-040 (external setting): 0...40 °C
• TR-040U (internal setting): 0...40 °C
• TR-060 (external setting): 0...60 °C
• TR-060U (internal setting): 0...60 °C
• Output: Relay
• Switching capacity: 24...250 VAC (16 A)
• Ambient temperature: -35...65 °C
• Protection class: IP65

• Temperature measurement range: -90...+260 °C
• Accuracy: ±0.2 °C (±0,2 %, when temperature is in range of +100...+260 °C)
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: 1 s...24 h
• Local alarms via LED indication, on LCD screen and acoustically by built-in beeper
• Data can be transferred to PC via USB-C interface
• Calibration certificate included
• Ambient temperature: -30...+70 °C
• Supply: lithium ion 3,6 V AA battery
• Protection class: IP67
• Warranty: 3 years

• Inputs: 4 x Pt1000
• Temperature measurement range: -90...+260 °C
• Accuracy: ±0.2 °C (±0,2 %, when temperature is in range of +100...+260 °C)
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: 1 s...24 h
• Local alarms via LED indication, on LCD screen and acoustically by built-in beeper
• Data can be transferred to PC via USB-C interface
• Calibration certificate included
• Ambient temperature: -20...+60 °C
• Supply: lithium ion 3,6 V AA battery
• Protection class: IP67
• Warranty: 3 years

• Input: 4x external Pt100 sensors
• Measuring range: -200…+260 °C
• Accuracy: ± 0.2 °C (± 0,2 %, when temperature is in range of +100...+260 °C)
• Resolution: 0,1 °C
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: adjustable 1 s...24 h
• Local alarms via LED indication, on LCD screen and acoustically by built-in beeper
• Data can be transferred to PC via USB-C interface
• Calibration certificate included
• Ambient temperature: -20...+70 °C
• Supply: lithium ion 3,6 V AA battery
• Protection class: IP20
• Warranty: 3 years