Поиск

• Прибор предназначен для преобразования и галванического разделения стандартных сигналов постоянного тока и напряжения и установления индивидуальной характерисики выходного сигнала.
• Вход гальванически изолирован от выхода и источника питания.
• Программирование прибора выполняется с помощью программатора PD14 и бесплатной программой LPConfig.

TSV202-60 ideal for monitoring battery banks, solar panels, industrial control circuits, and other high-voltage applications.

• Dual channel input: 0…60 V
• Communication interface: 1-Wire protocol
• Accuracy: ±1%
• Resolution: 0.001V
• Galvanic isolation between the voltage circuit and 1-Wire bus
• Operating environment: -20…+60 °C / 10…90 %RH
• Warranty: 3 years

• Dual channel input: 0…24 mA or 0…10 V
• Communication interface: 1-Wire protocol
• Accuracy: ±1 %
• Resolution: 0.001mA / 0.001 V
• Galvanic isolation between the current circuit and 1-Wire bus
• Detection of special states such as sensor errors or calibration values
• Operating environment: -20…+60 °C / 10…90 %RH
• Warranty: 3 years

• 1-Wire protocol current transmitter
• Current measurement range: 0,3...15 A (AC / DC, set by jumper)
• Resolution: 10 bits
• Galvanic isolation between the current circuit and 1-Wire bus
• Excellent long-term stability
• Warranty: 3 years
• Connection: RJ-11

• Input: Pt100 (2-, 3-, 4-wire)
• Measurement range: -200...+850 °C
• Resolution: 24 bits
• Very low current consumption
• No external power supply needed
• Warranty: 3 years
• Connection: RJ-11

• Input: 2x thermocouples - J, K, T, N, E, B, R, and S
• Output: Modbus RTU – RS-485
• Resolution: 24 bits with DSP processing
• Working isolation voltage: 1500 Vrms
• Operating temperature / humidity: -20…+60 °C / 10…90% (non-condensing)
• DIN rail mounting
• Power supply: 5…30 Vdc
• Warranty: 3 years

• Input voltage range: 0…264 Vac or 0…370 Vdc
• Input frequency: 0…60 Hz
• Input resistance: >2.4 MOhm
• Output: Modbus RTU – RS-485
• Resolution: 24 bits with DSP processing
• True RMS measurement
• Working isolation voltage: 1500 Vrms
• Operating temperature / humidity: -20…+60 °C / 10…90% (non-condensing)
• DIN rail mounting
• Power supply: 5…28 Vdc
• Warranty: 3 years

• Temperature measurement range: -30...+80 °C
• Humidity measurement range: 0...100 %
• Output: RS-485 Modbus RTU
• Calculates absolute humidity and dew-point temperature
• Cable length: 2 m / 2 m with M8 connector / 5 m / 10 m
• Operating temperature: -20...+60 °C
• Supply: 9...28 VAC/VDC

Carbon dioxide (CO₂), temperature and humidity transmitter with a display CDT2000.

• Carbon dioxide (CO₂) range: 400...2000 ppm
• Humidity range: 0...100 % 
• Temperature range: 0...50 °C

Temperature transducers P4141, P4121, P4151, P4131, P4161, P4171, P4191 with 4...20 mA output and Pt1000 input.

P4121 – P4171 class transducers are designed to convert RTD Pt1000 (3850ppm/°C) signal to current. These transducers have 4...20 mA output. RTD sensor Pt1000 is not included.

• Pressure range: from 0...1 to 0...16 bar
• Output signal: 4 ... 20 mA (P1–P2)
• Process temperature: -25...+125 °C
• Process connection: G1/4" f
• Protection class: min. IP65

Duct temperature transducer with 4...20 mA output is built in a durable watertight case. The length of stainless steel stem is 120 mm. Calibration certificate is included.

Duct temperature transducer with 0...10 V output is built in a durable watertight case. The length of stainless steel stem is 120 mm. Output temperature range is user adjustable. Calibration certificate is included.

• Hydrogen pressure transmitter’s measuring principle: Thin-film-on-steel
• EC79 and ECER-134 certification pending (see product website for current situation)
• Applications: Fuel cells, fueling stations, hydrogen compressors, hydrogen tanks, vehicles with H drive
• Measuring range: 0…1050 bar / 0…15000 psi *(see product datasheet)
• Measuring accuracy at 25 °C typ.: ± 0.3 / 0.5 % FS typ.
• Output signal: 4...20 mA, 0.5...4.5 VDC, 0...5 VDC, 1...5 VDC, 1...6 VDC, 0...10 VDC, 0.1...10.1 VDC, 0.5...4.5 VDC ratiometric, Switching output: 1 or 2 PNP
• Pressure connections: G1/4" m, 1/4"NPT m, 7/16"-20UNF SAE4 m
• Ambient temperature: 40°C…+85°C

• Industrial pressure transmitter’s measuring principle: Thin-film-on-steel
• Applications: hydraulics, industrial applications, machine tools
• 5-fold overpressure resistance
• Measuring range: 0...2.5 / 0...700 bar // 0...30 / 0...10000 psi
• Measuring accuracy at 25 °C typ.: ± 0.5 % FS typ. ± 0.3 % FS typ
• Output signal: 4...20 mA, 0...5 VDC, 0.5...5 VDC, 1...6 VDC, 0...10 VDC, 0.5…4.5 VDC ratiometric
• Ambient temperature: -40°C…+125°C

• Incremental encoder output: A, B   /   A, B, Z   /   A, /A, B, /B   /   A, B, Z, /A, /B, /Z
• Resolution: 5 / 10 / 25 / 50 μm
• Magnetic measurement (contactless, non-friction system)
• Vibration-resistant
• Cable length: 3 / 5 / 8 / 10 m (optionally 5...50 m)
• Supply: 10...30 VDC / 5 VDC
• Operating temperature: -25...+85 °C
• Protection class: IP67

• Incremental encoder output: A, B   /   A, B, Z   /   A, /A, B, /B   /   A, B, Z, /A, /B, /Z
• Resolution: 5 / 10 / 25 / 50 μm
• Portable reference point
• Stroke values up to 2000 mm
• Vibration-resistant
• Cable length: 3 / 5 / 8 / 10 m (optionally 5...50 m)
• Supply: 10...30 VDC / 5 VDC
• Operating temperature: -25...+85 °C
• Protection class: IP65

• Measuring range: -1…100 bar (see datasheet)
• Basic accuracy 0,5% of range
• Output: 4…20 mA
• Process connection: G 1/2“, G 1/2“, G 1/2“ Flush membrane, G 1/4“, G 1/4“, 1/2“ NPT, 1/4“ NPT, Tri-Clamp (Ø 50,5) Flush membrane
• Operating temperature: -20…+85 / 200 °C (see datasheet)
• Stainless steel housing and diaphragm material
• Protection class: IP67 / IP68

• Pressure range: from 0...0,1 to 0...40 bar
• Output signal: 4...20 mA / 0...5 VDC / 1...6 VDC / 0...10 VDC / 0,5...4,5 VDC
• Process temperature: -25...+125 °C
• Process connection: G1/4" f, G1/4" m, G1/2" m DIN3852-A, G1/2" m DIN3852-E, 1/4"NPT m ANSI B1.20.1, 1/8"NPT m ANSI B1.20.1, 7/16"-20UNF m SAE4, R1/4" m DIN3858, G3/4" frontal membrane
• Applications: Machine tools, hydraulics, water treatment
• Protection class: IP65, IP67, IP68

• Pressure range: from 0...6 to 0...600 bar
• Output signal: 4...20 mA / 1 x PNP / 2 x PNP
• Process temperature: -40...+125 °C
• Accuracy: 0,3 %
• Dielectric strength: 710 V
• Measurement principle: thin film on steel
• Protection class: IP65, IP67
• Conformity: EN 50155, EN 45545-2, EN 61373, EN 50121-3-2
• Parametrization by SMI programmer (not included) via Bluetooth connection from smartphone (Android)

• Output 4...20 mA
• Supply 90...250 VAC

• Signal splitter DAT5022
• Configurable with switches on body
• 3-way galvanic isolation (2000 VAC)
• Input: 4...20mA, 0...20mA, 0...10V, 0...5V, 2...10V, 1...5V
• Output: 2 X (4...20mA, 0...20mA, 0...10V, 0...5V, 2...10V, 1...5V)
• Power Supply: 18...32 VDC. Reverse polarity protection 60 VDC
• Current Consumption: Current output 35 mA max. Voltage output 25 mA max.
• Environment: -20...+70 °C / (non-condensing) 0-90%
• Housing: Self-extinguishing material
• EMC
  • Immunity: EN 61000-6-2
  • Emission: EN 61000-6-4

• Sensor type: Pt100, Pt1000, Ni100, Ni1000, others
• Electrical connection:
  • A transmitter with output: 4…20 mA, 4...20 mA +HART, 0…10 V, RS-485 or IO-LINK
  • 2-wire, 3-wire, a contact terminal
• Measuring range: -40…180 °C (depends on probe)
• Operating temperature (case with transmitter): -40…80 °C
• The sensor TJ-1 is selected according to the individual order
• Mounting box:
  • Material: Polystyrene
  • Dimensions: 64,4x 88,4x 42,2mm
  • Protection class: IP65
• The design could be changed according the requirements and drawings of the customer

• Sensor type: Pt100, Pt1000, Ni100, Ni1000, others
• Electrical connection:
• A transmitter with output: 4…20 mA, 4...20 mA +HART, 0…10 V, RS-485 or IO-LINK
• 2-wire, 3-wire, a contact terminal
• Measuring range: -40…180 °C (depends on probe)
• Operating temperature (case with transmitter): -40…80 °C
• The sensor TJ-4 is selected according to the individual order
• Mounting box:
• Material: Polystyrene
• Dimensions: 64,4x 88,4x 42,2mm
• Protection class: IP65
• The design could be changed according the requirements and drawings of the customer

• Sensor type: Pt100, Pt1000, Ni100, Ni1000, others
• Electrical connection:
  • A transmitter with output: 4…20 mA, 4...20 mA +HART, 0…10 V, RS-485 or IO-LINK
  • 2-wire, 3-wire, a contact terminal
• Measuring range: -40…180 °C (depends on probe)
• Operating temperature (case with transmitter): -40…80 °C
• The sensor TJ-S is selected according to the individual order
• Mounting box:
  • Material: Polystyrene
  • Dimensions: 64,4x 88,4x 42,2mm
  • Protection class: IP65
• The design could be changed according the requirements and drawings of the customer

• Operates as a temperature switch (thermostat), transducer, data logger
• Accumulated temperature data is read using a mobile phone with NFC interface
• Parametrization via NFC interface
• Display and electrical connection are independently rotatable 335°/343°
• Temperature measurement range: -50...+150 °C
• Analog output: 4...20 mA / 0...5 VDC /1...6 VDC / 0...10 VDC / switchable between mA and V
• Switch output: 2 x PNP
• Sensor: Pt1000 A
• Data logger memory: 3518 measurement points
• Measurement interval: 0,1...999,9 s
• Operating temperature: -25...+85 °C
• Supply: 15...30 VDC

• Input: RTD: Pt100 (3-wire), TC: J, K N
• Output: IO-Link
• Configuration: via IO-Link
• Operating temperature: -20...+80 °C
• Supply 24 VDC

Temperature transducer with 0...10 V output is built in a durable watertight case. Built-in precise temperature sensor. Output temperature range is user adjustable. Calibration certificate is included.

Temperature transducer with 0...10 V output is built in a durable watertight case. To be used with an external Pt1000 temperature probe. Output temperature range is user adjustable. Calibration certificate is included.

• Input: RTD: Pt100 (3-wire), TC: J, K N
• Output: IO-Link
• Configuration: via IO-Link
• Operating temperature: -20...+80 °C
• Supply 24 VDC

Temperature, humidity, pressure, CO2 transducers Pxxxx, Txx1x. LCD display.

• Transducer for DC current and voltage into other DC signal (1 output)
• Input, output and supply of the transducer are galvanic insolated
• Solves grounding problem in meshed signal networks
• User selectable type and range of input

• Up to 10 / 15 m level measurement with automatic temperature compensation
• Calculation of filling in the tank or flow in open channels
• Galvanically isolated 0/4...20 mA analog output
• Digital RS-485 Modbus RTU interface
• 2 alarm outputs
• Internal data and setup memory
• Two 32-points individual characteristics (for recalculation)
• LCD screen
• Housing protection grade: IP66
• Sensor protection grade: IP66 / IP 68
• Supply: 12...25...40 VDC
• Operating temperature: -20...23...55 °C

• Up to 10 / 15 m level measurement
• Analog output: 4…20 mA
• Digital output: RS-485 Modbus RTU
• Resolution: 3 mm
• Supply: 24 VDC / 300 mA
• Operating temperature: -20...60 °C
• Cable length: 1 m

• CO2 concentration measurement range: 0...10 000 ppm
• Output: 4...20 mA
• Programmable
• External probe cable length: 1 / 2 / 4 m
• LCD display
• Calibration certificate included
• Ambient temperature: -30...+80 °C
• Supply: 9...30 VDC
• Protection class: IP65
• Warranty: 3 years

Temperature and air humidity transducer P19 with RS-485 output, designed for room humidity ant temperature contro. Can be used in various control and monitoring systems. Output signal is digital (RS-485, MODBUS). Transducer parameters are programmed via PC. Wall-mounted. Can work in condensation-free environment.

• Integrated temperature and humidity sensor
• Calculated values – dew point temperature, absolute humidity
• Minimal and maximal value memory
• Isolated RS-485 port

Relative humidity and temperature transducer P18D with display and RS-485 output, designed for temperature and humidity measurement.

• Sensor type: Pt100, Pt1000, Ni100, Ni1000, others
• Electrical connection:
  • A transmitters with output: 4…20 mA, 4...20 mA +HART, 0…10 V, RS-485 or IO-LINK
  • 2-wire, 3-wire, a contact terminal
• Measuring range: -40…80 °C
• Operating temperature: -40…80 °C
• The sensor can be distanced, meaning the TJ-O can be equipped with the following external temperature sensors: TJ-1, TJ-2, TJ-4, TJ-S
• Sensor tube:
  • Material: Stainless steel AISI304 (1.4301)
  • Diameter: Ø6 mm
  • Length: 25 mm
• Mounting box:
  • Material: Polystyrene
  • Dimentions: 64,4x 88,4x 42,2mm
  • Protection class: IP65
• The design could be changed according the requirements and drawings of the customer

Linear encoder MLS210. With spiral connection.

Technical specifications

• Protection class IP67
• Resistant to humidity
• Aluminum casing
• Incremental outputs A, /A, B, /B and Z
• Output “push-pull”, TTL or RS-422
• Supply 5 VDC or 10...30 VDC

Linear encoder MLS110. With cable connection.

Technical specifications

• Wide range of available resolution (up to 1 µm)
• Protection class IP67
• Resistant to humidity
• Aluminum casing
• Incremental outputs A, /A, B, /B and Z
• Output “push-pull”, TTL or RS-422
• Supply 5 VDC or 10...30 VDC

Linear encoder MLS110. With spiral connection.

Technical specifications

• Wide range of available resolution (up to 1 µm)
• Protection class IP67
• Resistant to humidity
• Aluminum casing
• Incremental outputs A, /A, B, /B and Z
• Output “push-pull”, TTL or RS-422
• Supply 5 VDC or 10...30 VDC

Linear encoder MLS120.

Technical specifications

• Casing integrated into slider
• Wide range of available resolution (up to 1 µm)
• Protection class IP67
• Resistant to humidity
• Aluminum casing
• Incremental outputs A, /A, B, /B and Z
• Output “push-pull”, TTL or RS-422
• Supply 5 VDC or 10...30 VDC

Linear encoder MLS130. Very small size.

Technical specifications

• Very small measuring head (in metal enclosure)
• Wide range of available resolution (up to 1 µm)
• Protection class IP67
• Resistant to humidity
• Aluminum casing
• Incremental outputs A, /A, B, /B and Z
• Output “push-pull”, TTL or RS-422
• Supply 5 VDC or 10...30 VDC

Linear encoder MLS210. With spiral connection and slider joints.

Technical specifications

• Protection class IP67
• Twin sliders
• Resistant to humidity
• Aluminum casing
• Incremental outputs A, /A, B, /B and Z
• Output “push-pull”, TTL or RS-422
• Supply 5 VDC or 10...30 VDC

• 4 analog inputs (standard signals, RTD, thermocouple)
• RS-485 Modbus output (Slave mode)
• 2 alarm outputs
• Galvanic isolation of inputs (2 from other 2)
• Programmable individual characteristics, mathematical functions
• Programmable time counters
• Rail-mounted

• Ambient temperature and humidity transducer with 4...20 mA output
• Stem length 700 mm
• Calculated values: dew point temperature, absolute humidity, specific humidity, mixing ration, specific enthalpy
• Display with two periodically changed shown values (can be switched off)
• Integrated sensors
• Calibration certificate is included
• Programmable output
• Low temperature inertia
• For use in non-aggressive environment
• 3 year warranty

LTC potentiometric linear transducers are designed for usage in linear displacement, movement measurement and position detection.

The main difference from LTM transducers is that LTC has self-tuning mounting with two bearings with which the non-linear twist of up to ±30 ° is possible. Movement of up to 1000 mm.

Application:

• Press Brake Machines
• Marble Machines
• Tension Control
• Horizontal Band Saw Machines
• Transfer Machines
• Hydraulic Machines
• Sheet Metal Working Machines
• Bending Presses
• Textile Machines