Поиск

• Noncontact infrared temperature meter 3i Plus (pyrometer), designed for metalworking industry where casting, hardening, heating take place. Also suitable for ceramics, semiconductor, chemical furnace temperature measurement
• It is a new generation, small size IR device for high temperature measurement
• Precise high-resolution optics guarantee high accuracy, resistant casing let the device survive falls from up to 1 meter height
• That said, measurements can be done in various environments and from various distances

• Noncontact stationary infrared temperature meter CM for temperature measurement
• Range: -20...500 °C
• Outputs: 0...5V, or TC K / J type (chosen while ordering)
• Software “DataTemp Multidrop” for remote monitoring and configuration

• Noncontact infrared thermal meter (pyrometer) ENDURANCE
• for temperature measurement up to 3200 ºC with the resolution of 0,1 ºC
• Outputs: Ethernet, profinet, 0/4...20mA (isolated), RS485, relay 48V and 300mA
• Web server
• Wider area can be measured when used with SpotScan

• Noncontact infrared thermal meter Marathon MM, wide range of accessories for various applications
• Range: -40...3000°C (in fixed ranges)
• Outputs: 0/4...20mA, RS485, mechanical switch

• Noncontact infrared thermal meter Thermalert TX, additional accessories for various applications
• Can be used in an explosive area
• Range: -18...2000 °C (in fixed ranges)
• Outputs: 4...20mA, HART į RS232, mechanical switch (depends on version)

PoE (power over Ethernet) temperature, relative air humidity, atmospheric pressure meters T4611, T3611, T7611. Only to be used with external sensors.

Application:

• Storage rooms
• Greenhouses
• Telecommunication devices
• Servers
• A/C units

PoE (power over Ethernet) temperature, relative air humidity, atmospheric pressure meters T0610, T3610, T7610. Only to be used with internal sensors.

Application:

• Storage rooms
• Greenhouses
• Telecommunication devices
• Servers
• A/C units

• Oxygen concentration measuring in air and inert gas mixtures
• Specially developed for use in composting plants
• Measuring range of oxygen concentration: 0,1…25 % (0…100 % range on request)
• Value indicator of measured oxygen concentration
• Output: 4…20 mA analog or bidirectional digital signal (for calibration, operation diagnostic)
• Length and diameter of the sensor protection tube to the handle: 1200 x 30 mm
• Length of the protective tube part to be stuck in the compost heap: ~ 1000 mm
• Material of protective tube: Stainless steel 1.4301
• Housing ambient temperature: -10…+50 °C
• Probe ambient temperature: -10…+100 °C
• Protection class of housing electronic: IP65
• Protection class of probe: IP40
• Rechargeable battery with indication of voltage
• It is possible to connect the sensor to a stationary data processing system

• Power factor controller for reactive power compensation
• Measures 73 power network parameters (40 visible on screen, all via Modbus RTU)
• Relay outputs: 4 / 6 / 8
• Programmable switch in time, switch off time and discharge time
• Alarm message and relay output
• Optional digital output: Modbus RTU (RS-485)
• Optional real time clock (RTC)
• LCD screen
• Operating temperature: -10...+60 °C
• Protection class (front): IP54

• Measures and records parameters in 3 and 4-wire, 3-phase, balanced or unbalanced power network
• Up to 500 electrical network quality parameters according to EN 50160, EN 61000-4-30, standards
• Measuring class A or A / S
• Support the IEC 60870-5-104 communication protocol (new - option)
• Analysis of voltage and current harmonics and interharmonics (up to the 51-st)
• Monitoring up to 6 additional energy meters with pulse output
• Recording of measurements before and after events (dips & swells)
• Configurable archives of logged values and events
• SD card support (up to 32 GB)
• Webserver function, FTP server, DHCP client
• Outputs: relays, binary, analog
• Binary inputs
• E-mail alarms
• Interfaces: RS-485 Modbus slave, Ethernet 100 Base-T (Modbus TCP server), USB device and host
• Color touchscreen: LCD TFT 5.6“
• Many data representation modes (i.e. digital display, analog, bar graph, vector diagram)
• IP65 protection class for front side
• Real time clock (RTC) synchronization with NPT time server
• Time synchronization via external GPS module - STR  receiver (new - option)

• The MQTT protocol is ideal for communication in distributed acquisition systems data (IoT applications)
• Measures 54 power network parameters (up to 63-rd harmonic, in 1- and 3-phase network)
• Color LCD TFT 3,5” display
• Additional 2 pages for harmonics presentation and 1 dedicated page for visualization in the form of an analog meter
• Display pages are fully configurable by user (10 pages. 8 parameters in each)
• 2 configurable alarm outputs
• Digital RS-485 Modbus output
• Optional: 0/4...20 mA output and 2xPt100 inputs
• Optional: logging of 32 parameters into internal 8 GB memory
• Modbus TCP/IP, HTTP, WWW server, FTP server, DHCP client

• Measures 16 power network parameters (1- and 3-phase network)
• Digital output: Modbus RTU (RS-485)
• Pulse outputs: 2
• Direct current measurement for up to 1/5 A
• Complies with EU directive 2004/22/EC annexes B and D (MID)
• On the MID Version, you can only program the CT Rate ONCE!
  The second time you set it up, the device will lock up and you will have to send it to the manufacturer for a reset.
• Backlit screen
• Operating temperature: -25...55 °C
• Protection class: IP51

• Measures 16 power network parameters (1- and 3-phase network)
• Digital output: Modbus RTU (RS-485)
• Pulse outputs: 2
• Direct current measurement for up to 100 A
• Complies with EU directive 2004/22/EC annexes B and D (MID)
• On the MID Version, you can only program the CT Rate ONCE!
  The second time you set it up, the device will lock up and you will have to send it to the manufacturer for a reset.
• Backlit screen
• Operating temperature: -25...55 °C
• Protection class: IP51

Measurement of 54 power network parameters, including current and voltage harmonics up to 63rd in 1-phase 2-wire or 3-phase 3 or 4-wire balanced and unbalanced systems

• High accuracy class (0.2S for active energy)
• Interface: RS-485 (Modbus RTU 8N2,8E1,8O1,8N1)
• Graphical color display: LCD TFT 3,5’’, 320 x 240 pixels, fully configurable by a user (10 screens, 8 parameters in each)
• Additional 2 screens for harmonics presentation and 1 dedicated screen for visualization in the form of an analog meter
• Memory of minimum and maximum values
• 2 configurable alarm outputs
• Supervisory relay mode for alarm outputs
• Password protection
• Programming of parameters using free eCon software
• Battery backup RTC
• Supply: 85...253 V ac / 90...300 V dc
• Operating temperature: -10…23…+55 °C
• Overall dimensions: 96 x 96 x 77 mm

• Designed to measure the moisture of wood, sawdust, shavings, chips, straws and hay
• Moisture measurement method: resistive
• Sawdust moisture range: 8...30 %
• Hay moisture range: 8...25 %
• Sample size: 120 cm³
• Sample compression pressure: 0,2 MPa

• Portable wood moisture meter WTR-1E (needle), designed for moisture measurement from 6 to 100 %
• Designed to measure the moisture of wood, sawdust, scobs, shavings, slivers
• Moisture measurement method: resistive
• Moisture measurement range: 8...50 %
• Step value: 0,1 %
• Sample size: 120 cm3
• Sample compression pressure: 0,2 MPa
• Display: LCD
• Supply: 12 V battery

Solarimeter SL 100.

Solarmeter CR110.

For on-line measurements of air pollution or combustion gases flow in chimneys or flues.

Hydrostatic level meter HLM–25C is compact measuring device containing ceramic tensometric sensor and evaluation electronics in stainless steel probe. Ceramic sensor is resistant to lightly soiled, or sludge water. From the probe housing comes out 2-wire cable with capillary (for atmospheric pressure compensation). The front side of the sensor is open, therefore the level meter is resistant to capture gross (solid) impurities.

• For continuous level measurement of clean, lightly soiled, or sludge water in non-pressure reservoirs, boreholes, tanks etc.
• The measurement range up to 100 m (H2O)
• The health certificate for contact with potable water available
• Output: 4…20 mA or 0…10 V

• Measures ambient temperature, humidity
• Calculates dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
• Measuring ranges: -30...+80 °C, 0...100 %RH
• Output: Ethernet
• Optional connection to WiFi network via tiny wireless router TL-WIFI
• Webserver
• Measurement interval: 2 s
• Alarm protocols: E-mail, SNMP Trap, Syslog
• Supply: 9...30 VDC
• Protection class: IP30
• Calibration certificate included

• Measures ambient temperature, humidity
• Calculates dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
• Measuring ranges: -30...+105 °C, 0...100 %RH
• External sensor cable length: 1 / 2 / 4 m
• Output: Ethernet
• Optional connection to WiFi network via tiny wireless router TL-WIFI
• Webserver
• Measurement interval: 2 s
• Alarm protocols: E-mail, SNMP Trap, Syslog
• Supply: 9...30 VDC
• Protection class: IP30 for device, IP40 for sensor
• Calibration certificate included

• Sensor for remote temperature monitoring over the Internet (Ethernet interface)
• Webserver function
• Ideal for server, air conditioning, HVAC, warehouse, museum and factory temperature monitoring
• Remote alarm (meter sends an e-mail when the set temperature range is breached)
• Archive in CSV format
• MODBUS TCP protocol
• Calibration certificate included
• 3 year warranty

• Measures ambient temperature, humidity, pressure
• Calculates dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
• Measuring ranges: -30...+80 °C, 0...100 %RH, 600...1100 hPa
• Output: Ethernet
• Optional connection to WiFi network via tiny wireless router TL-WIFI
• Webserver
• Measurement interval: 2 s
• Alarm protocols: E-mail, SNMP Trap, Syslog
• Supply: 9...30 VDC
• Calibration certificate included
• Protection class: IP30

• Air velocity, airflow and temperature measurement
• Air flow measurement with a cone
• Automatic average
• Display of minimum and maximum values, hold function
• Adjustable auto shut-off
• Detection of flow direction
• Selection of units
• Supplied with calibration certificate

• Display of minimum and maximum values, hold function
• Adjustable auto shut-off
• Automatic average
• Selection of units
• Detection of flow direction (LV 110/LV 117)
• Supplied with calibration certificate
• Air flow measurement with a cone (LV 110/LV 117)

Capillary thermometer TXC is designed for temperature measurement from -200 to +800 °C. Capillary parameters, diameter and length of measuring element, measurement dial range, process connection, contact type and other parameters must be chosen from the catalogue. 

Stainless steel thermometer TXR is designed for temperature measurement from -200 to +800 °C. Diameter and length of measuring element, measurement dial range, process connection, contact type and other parameters must be chosen from the catalogue. 

• Designed to measure the thickness of non-magnetic layers
• Can be used for construction, ships, tanks, piping, boilers, vehicles protective layer quality control
• High accuracy in wide temperature (with compensation) range using the same probe
• Fit for work outside
• Certificate of calibration included

Traditional U-shaped with easily controlled zero point. For air and non-aggressive gasses.

• Range: -500...500 Pa

Fluid manometer for air and non-aggressive gasses – high quality pressure meter for narrow temperature ranges.

• Range: 0…10 kPa

• EDP2041 is standard signals generator (digital potentiometer) with outputs:
  • 0…10 V; Resolution: 1 mV; Fluctuation: max 30 mA; Rise time from 0 to 10V is max. 300ms
  • 0 / 4…20 mA; Accuracy: 0.1 %; Resolution: 2 µA; Fluctuation: max. 60 µA
• Preset value can be adjusted from external buttons
• Communication via RS-485 Modbus protocol or synchronous running between two or more potentiometers
• Display scale can be adjusted between -1999 and 9999
• Soft on and soft off properties can be selected
• 4 digits display
• Parameter access protection on 3 levels
• Supply: 230 V AC; 24 V AC; 9…30 V DC
• Ambient temperature: 0…50 °C

• Volumetric flow and air velocity meter with linear analogue output in control quality (0...10 V & 4...20 mA) and switch
• Suitable for media temperatures up to 350°C
• Measured value display by means of LCD and LED
• Freely scalable measuring range m/s, m³/h, l/min
• Sensitive and fast airflow detection up to 30 m/s
• Exemplary areas of application: Measurement and control of air flows, building services, PLC, filter monitoring, extraction and extrusion systems, exhaust gases and test benches

• Temperature measurement range: -20…+60 °C
• Humidity measuring range: 0…95 % RH
• Dew point measuring range: -60…+60 °C
• CO2 measuring range: 0…5000 ppm
• Atmospheric pressure measuring range: 700…1100 hPa
• Simple sensor connection to existing WIFI network (standard: IEEE 802.11 b/g/n)
• Measured values can be sent to the internet storage COMET Cloud or COMET Database
• Communication protocols: HTTP(S), SMTP, Modbus TCP, SNMP (v1, v2c, v3), HTTP POST, HTTP GET (JSON, XML)
• Alarm signalization: e-mail, acoustic, LED, SMS - additional order
• Measuring interval: 1 s
• Sending interval to COMET Cloud: adjustable 5 min. to 12 hours
• Calibration certificate of manufacturer included
• Operating temperature: -30…+60 °C
• Supply: 5,0…5,4 VDC USB-C connector
• Protection class: IP30

• MA series converters reads Wired M-Bus meters and transmit the data wirelessly using the Wireless M-Bus protocol
• Reads data from up to 500 devices
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: T1
• AES-128 encryption mode 5, profile A
• Automatically search wired meters and sends data
• Two internal antennas or one external antenna
• Power supply: 100…240 VAC
• Protection class: IP67

Sensor SKU: 5905309601475 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Differential pressure measurement range: +/- 500 Pa, accuracy: up to 1 Pa
• Length of measuring tubes: 1 m (another lengths on request)
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh, 3xAA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -15…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327820 (IP30)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Differential pressure measurement range: +/- 500 Pa, accuracy: up to 1 Pa
• Length of measuring tubes: 1 m (another lengths on request)
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Case IP30 protection

Sensor SKU: 5905309603240

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Probe cable length: 15 m (0,1…200 m lengths available on request)
• Accuracy: 0,2 % or 0,5 % (FSO)
• Measuring environment: water (well, sea), high temperature liquids (up to 100 °C and corrosive liquids (available upon custom request)
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 5 seconds to 18 hours (configurable by the user)
• Measurement sending interval: 1 minute to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Case IP67 protection / Probe enclosure IP68 protection
• Sensor housing material: Stainless Steel (304 SST)

Sensor SKU: 5905309600959 (IP30)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud** platform or any other third party systems.

• Illuminance measurement range: 0…83000 lux
• Filtering: rejects > 99 % (typically) of IR (matches human eye)
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection

• Range: 6...60 %
• Step value: 0,1 %
• Temperature compensation (-10...+60 °C)
• Many wood types (12 common and 270 exotic)
• Replaceable needles made of high quality steel
• Display: LCD
• Chromium plated steel body
• Supply: 12 V battery (approx. 5000 measurements)

• Portable wood moisture meter WRD-100 (needle), designed for moisture measurement
• Moisture measurement method: resistive
• Range: 6...100 %
• Wood types: 11 (set by handle)

Bimetallic ammeters BA27, BA39, BE27, BE39 indicate flowing current and maximal flown current. When the user presses the button on the front of ammeter, maximal current indication arrow returns to the actual value.

BE27 and BE39 additionally indicate average current of 8-15 minute timespan. They are fit to indicate thermal current indication in transformers, cables and other electric devices. Measuring range can be extended according to customer’s demand.

• Panel electromagnetic devices are designed to measure effective values of current and voltage
• The devices are fit to be mounted in up to 15 mm-thick panels
• Meter EB16 is mounted on 35 mm rail
• Tropical version is also available
• Ammeters for use with transformers (X/1A and X/5A) available

• Panel devices are designed to measure AC and DC current and voltage
• Those with P index have integrated rectifier which enables the device to measure effective currents and voltages
• Asymmetric form signal measurement accuracy depends on harmonic component levels
• The devices are fit to be mounted in up to 15 mm-thick panels
• Meter MB16 is mounted on 35 mm rail
• Tropical version is also available
• Ammeters for use with transformers (X/1A and X/5A) available

• Measures and records power network parameters in single phase or three phase 3 and 4-wire symmetrical and asymmetrical systems
• 54 electrical network quality parameters
• Analysis of voltage and current harmonics (up to the 51-st)
• Color touchscreen: LCD TFT 3.5“, 320 x 240
• 2 configurable alarm outputs
• Analog output 0/4...20 mA and 2 x Pt100 inputs (optional)
• Digital output: RS-485 (MODBUS)
• Ethernet / Profinet 2.2
• Supply: 85...253 VAC / 90...300 VDC or 20...40 VAC / 20...60 VDC
• Battery backup RTC
• Dimensions: 96 x 96 x 77 mm

• The innovative multiple sensing head interface, which can support up to 8 individually addressable heads per communication box
• reduces sensor cost, simplifies sensor installation and applications troubleshooting, and provides the lowest cost per measurement point