Поиск

• Measures power network parameters in 3-phase network 3 or 4-wire symmetrical or asymmetrical systems
• THD factor
• Outputs: 3 relays and 1 analog output (ND10), 1 relay and 3 analog outputs (+/-) (ND10A)
• Digital output: RS-485 MODBUS (option)
• Protection class for front side: IP65
• Supply: 85...253 VDC/VAC
• Backlit LCD display
• Dimensions: 96 x 96 x 77 mm

• Measurement of power network parameters in 1-phase and 3-phase (3 or 4-wire) systems
• Current inputs 0,1 A and 0,25 A (for dedicated transformers)
• Quick and convenient ways to connect current transformers via RJ12 connector or screw terminals
• Designed for usage with following transformers: LJ12, LJ25, LJ35, LJ45, LJ306, LJ307, LJ308
• RS-485 (MODBUS RTU) interface
• THD factor measurement
• Backlighted LCD 3,5”
• Protection grade from the frontal side: IP65

Digital programmable indicator N20 for temperature, DC voltage and current measurement. Measures J, K, Pt100 temperature sensors’ signals.

Programmable parameters:

• LED indicator color, which changes depending on input signal value: green, yellow and red
• Value limits
• Measurement unit indication
• Cold junction compensation (CJC)
• Compensation for Pt100 sensors
• Averaging time
• Individual characteristic
• 2 OC alarms in 6 modes

Single-phase commutator – controller RP7. The device can be used or circuit commutations. Can be used for resistive and inductive loads and single-phase motor speed control. Possible control with standard analog signal.

Other functions:

• Load current limiting
• Soft start
• Isolated inputs
• Load current control
• Fuse failure detection
• Overload indication

Multifunctional professional current cramps NC12 with twistable clamp direction. The device is designed to measure AC current and AC/DC voltages, frequency, temperature (with Pt100 and Pt1000 sensors), electric resistance and capacitance. Twistable clamp direction enables user to measure current in hard-reachable areas. Two variants are available: NC12-300A (up to 300 A AC) and NC12-1000A (up to 1000 A AC).

Multifunctional professional current cramps NC14 with twistable clamp direction. The device is designed to measure AC current and AC/DC voltages, active, reactive, apparent power, inrush current, resistance, harmonics (up to 49th), phase angle, THD, power factor, DF, crest factor and power factor. Twistable clamp direction enables user to measure current in hard-reachable areas. Can be used in single- and three-phase (3 or 4 wire systems) networks. Two variants are available: NC14-400A (up to 400 A AC) and NC14-1000A (up to 1000 A AC).

• Universal datalogger with 4 inputs, 2 for voltage, current, logic and pulse signals and 2 for connecting temperature and humidity probes.
• Multilogger can be installed permanently to Ethernet network or work as a portable device.
• Measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.
• Calibration certificate included.
• 3 rechargeable AA batteries with a power adapter, wall holder and USB cable are included in the delivery.
• Temperature (Pt1000) and humidity probes are ordered separately. Cable length – 1, 2, 5, 10, 15 meters.
• Open collector transistor alarm output.

• Universal datalogger with 4 inputs, 2 for voltage, current, logic and pulse signals and 2 for connecting temperature and humidity probes.
• Measures barometric pressure using the integrated sensor.
• Multilogger can be installed permanently to Ethernet network or work as a portable device.
• Measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.
• Calibration certificate included.
• 3 rechargeable AA batteries with a power adapter, wall holder and USB cable are included in the delivery.
• Temperature (Pt1000) and humidity probes are ordered separately. Cable length – 1, 2, 5, 10, 15 meters.
• Open collector transistor alarm output.

• Universal datalogger with 4 inputs, 2 for voltage, current, logic and pulse signals and 2 for connecting temperature and humidity probes.
• Measures carbon dioxide (CO2) using the integrated sensor.
• Multilogger can be installed permanently to Ethernet network or work as a portable device.
• Measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.
• Calibration certificate included.
• 3 rechargeable AA batteries with a power adapter, wall holder and USB cable are included in the delivery.
• Temperature (Pt1000) and humidity probes are ordered separately. Cable length – 1, 2, 5, 10, 15 meters.
• Open collector transistor alarm output.

• Portable analyzer NP40 is designed for power network quality parameter analysis
• Analyses voltage and current harmonics up to 51-st, THD
• Real-time waveform display (4 voltage / 4 current)
• Measurement of TRMS currents up to 3000 A (with standard sensor)
• Half cycle RMS measurement (voltage and current)
• Measurement in 1-phase and 3-phase systems (3- and 4-wire)
• Voltage, current, harmonics, power, energy and other parameter measurement
• Graphical representation of data in a waveform and vector diagram
• Record of events: dips, swells, overvoltages
• Built-in 8 GB memory card
• Ethernet interface for remote monitoring
• USB interface for data transfer
• Color 5,6” TFT display, 320 x 240 px

• Transducer for AC current and voltage into DC signal (1 output)
• Input, output and supply of the transducer are galvanic insolated
• The construction of the transducer ensures accurate and fast signal transformation
• Fast and easy installation on rail, or onto a wall or in panel using holder

• Transducer for DC current and voltage into other DC signal (2 outputs)
• Input, output and supply of the transducer are galvanic insolated
• The construction of the transducer ensures accurate and fast signal transformation
• Fast and easy installation on rail, or onto a wall or in panel using holder

• Signal transducer P20Z is designed to convert AC current and voltage (without direct component) into DC voltage or current signal
• Input is isolated from input and supply
• Has fixed inputs and outputs – non-programmable

Temperature and standard signal transducer P30U.

• Programmable input
• Mathematical functions
• Individual channel characteristic
• 1 or 2 outputs
• Variant with internal transducer 24 VDC power supply
• RS-485 interface
• Adjustable dimension
• Data logging into internal memory (4 MB) or SD/SDHC card (4 GB)
• Transducer programming with buttons or via PC (“LPConfig” software)

• Current (AC / DC) transducer T23CT with 4...20 mA output
• AC/DC current input (single option): up to 50 / 100 / 150 / 200 / 300 A
• Optional mounting on DIN rail
• Galvanic isolation
• Supply: 24 VDC
• Ambient temperature: -25...+55 °C
• Protection class: IP65, IP40 for terminals

• Meter to measurements electric quality parameters in 3 phase systems
• Programmable display pages
• 3 programmable alarm outputs and 1 pulse output
• Digital transmission to the master system through the RS-485 interface
• USB for configuration by using free eCon software

Current transformers for busbars LCTB.

Current transformers for cables LCTR.

Current transformers LCTS with split core.

• Primary current: 100...500 A or 300...800 A
• Secondary current: 5 A
• Hole diameter: 27 mm or 37 mm
• Hole depth: 45 mm
• Accuracy class: 1

• Multimeter with backlit LCD screen (two shown values)
• Four versions: NP10-2, NP10-3, NP10-5, NP10-6 TRMS (see datasheet below)
• Capacity measurement from 1 pF to 40 mF
• AC and DC voltage measurement from 100 μV to 1000 V
• AC and DC current measurement from 10 μA to 10 A
• Resistance measurement from 100 mΩ to 60 MΩ
• Frequency measurement from 10 Hz to 10 MHz
• Diode measurement and continuity testing
• Hold function
• Relative measurement
• Duty cycle (%) measurement
• Temperature measurement (K type thermocouple) from 0 to 1300 °C
• Peak value measurement

• Digital multimeter with data logging view function (up to 32000 readings) 
• Four versions: NP15-2, NP15-3, NP15-5, NP15-6 TRMS (see datasheet below)
• TRMS measurement
• Low input impedance
• Capacity measurement from 1 pF to 40 mF
• AC and DC voltage measurement up to 1000 V
• AC and DC current measurement up to 10 A
• Resistance measurement
• Frequency measurement
• Diode measurement and continuity testing
• Filtering
• Square wave signal generator
• Hold function, backlight, maximal and minimal value presentation
• External supply
• Duty cycle (%) measurement
• Temperature measurement (K, J type thermocouples, Pt100 and Pt1000)
• Automatic / manual range selection
• USB connectivity (optional)

• Digital multimeter for insulation resistance measurement
• Multimeter with backlit LCD screen
• AC and DC voltage measurement up to 1000 V
• AC and DC current measurement up to 300 mA
• Resistance measurement up to 30 mΩ
• Insulation resistance measurement up to 3 GΩ
• Capacitance measurement up to 30 μF
• Frequency measurement up to 100 kHz
• Fill factor measurement (%)
• Hold function
• Temperature measurement (Pt100 and Pt1000)
• Diode check
• Analog scale on screen