Termoprodukt

Ambient humidity and temperature logger TERMIOPLUS-S with external sensor is designed for logging of ambient humidity and temperature in its internal memory.

• Temperature range: -30...+70°C
  • Temperature accuracy: In range -30...+70 °C: ± 0,3 °C
  • Resolution: 0.1
• Humidity range: 0...100 % RH
  • Humidity accuracy: ±2 %RH at 25 °C (30…70 %RH); ±3 %RH at 25 °C (10…90 %RH); ±4 %RH at 25 °C (0…100 %RH)
• Memory: 32000 (16000 temperature and 16000 humidity)
• USB interface for data download
• Logging interval: 15 s...10000 min
• Supply: 2xAA battery, 3.6 V
• Battery lifetime: 1 one year with 30 min. interval recording at +10 °C
• Size: 45 x 100 x 19 mm

• Temperature range: -30...70 °C
• Accuracy: ±0,5 °C (-10 °C...40 °C) / ± 1 °C
• Display: LCD
• Battery work time: 2 years
• Battery type: 1/2 AA (3,6 V)
• Dimensions: 45x100x19 mm
• Protection class: IP65
• Weight: 85 g
• Holder is ordered separately

• Temperature measurement range: -100…+300 °C
• Accuracy: ±0.07 °C (-10…+100 °C); ±0.15 °C (+101…+150 °C); otherwise ±0.4 °C
• Resolution: 0.01 °C
• Memory: 32 000 readings
• Power supply: battery 3.6V 1/2AA
• Operating temperature: -30…+70°C
• Protection class: IP65
• Wall mount available as optional accessory

• Temperature measurement range: -100…+300 °C
• Accuracy: ±0.07 °C (-10…+100 °C); ±0.15 °C (+101…+150 °C); otherwise ±0.4 °C
• Resolution: 0.01 °C
• Memory: 32 000 readings
• Power supply: battery 3.7V 1/2AA (Charging time: 1,5 h)
• Operating temperature: -30…+70°C
• Protection class: IP65
• Wall mount available as optional accessory

• Temperature range: -50...250 °C or -50...500 °C
• Accuracy: ±0,03 °C
• Resolution: 0,01 °C (switchable to 0,1 °C)
• Display: LCD, 6 digits, backlight
• MIN, MAX, hold functions
• Sensor: Pt100
• Protection class: IP65
• Suitcase is ordered separately

• Thermometer DT20 for temperature measurement in smokehouses, butcheries, etc.
• Measuring range -50...20 °C, accuracy 0,1 °C
• Sharp-tipped probe ST-03 (4x120 mm) made of stainless, acid-resistant steel (1H18N9T)
• Cable length 3 m
• Operating temperature 0...40 °C
• Supply 230 V
• Size 130x94x81 mm
• Ergonomic ABS casing with indicator, IP65

Digital thermometer DT-34 is designed for fluid, gas and solid body temperature measurement in range of -50°C to 270°C. Casing is made out of mechanically resistant plastic (ABS) and contains special collars for dust, dirt and water protection.

The measurements are done with a Pt1000 sensor. Special sensor construction and small size ensure little thermal inertia and fast measurement. The results are shown in a 4-digit LCD display, of which the fourth digit shows the decimal part. Negative temperatures are shown with a minus sign. The device can be used in laboratories and manufacturing for technological measurements in various conditions.

Thermometer DT-34 can be shipped with a fitting temperature sensor made according to Your requirements.

Digital thermometer ST-90 for temperature measurement from -200 to 1200 °C.

ST-90 is designed for usage with various construction K-type thermocouple sensors. The sensor is connected via MiniTherm port on the top of ST-90. The device is supplied by 9V 6F22 battery (work time up to 500 h). Indication on LCD screen (3 1/2). Special collars protect the electronics from moisture, grease and dust.

Thermometer ST-90 can be shipped with a fitting temperature sensor made according to Your requirements.

• Temperature range: -30...+70 °C
• Humidity range: 0...100% RH
• Resolution in range: 0.1 °C
• Temperature accuracy: In range -20...+40 °C: ±0,5 °C; outside of range: ±1,0 °C
• Humidity accuracy: ± 2 %RH
• Supply: 3.6 V (Lithium battery)
• Battery lifetime: up to 2 years
• Protection class: IP65
• Size: 45 x 100 x 19 mm

Digital thermometer DT-1 is designed to be used for temperature measurements in liquids, gasses and solids in range of -50...+200 °C. The casing is made out of mechanically resistant plastic (ABS) and has special collars, protecting the device from dust, dirt and water. The measurements are conducted using a Pt1000 sensor. Special sensor construction and small size guarantee little delay and fast measurement. The results are shown in 4-digit LCD (last digit represents the decimal part). The device can be used in laboratories and industry in any conditions.