Поиск

TSV202-60 ideal for monitoring battery banks, solar panels, industrial control circuits, and other high-voltage applications.

• Dual channel input: 0…60 V
• Communication interface: 1-Wire protocol
• Accuracy: ±1%
• Resolution: 0.001V
• Galvanic isolation between the voltage circuit and 1-Wire bus
• Operating environment: -20…+60 °C / 10…90 %RH
• Warranty: 3 years

• Dual channel input: 0…24 mA or 0…10 V
• Communication interface: 1-Wire protocol
• Accuracy: ±1 %
• Resolution: 0.001mA / 0.001 V
• Galvanic isolation between the current circuit and 1-Wire bus
• Detection of special states such as sensor errors or calibration values
• Operating environment: -20…+60 °C / 10…90 %RH
• Warranty: 3 years

• 1-Wire protocol current transmitter
• Current measurement range: 0,3...15 A (AC / DC, set by jumper)
• Resolution: 10 bits
• Galvanic isolation between the current circuit and 1-Wire bus
• Excellent long-term stability
• Warranty: 3 years
• Connection: RJ-11

• Input: Pt100 (2-, 3-, 4-wire)
• Measurement range: -200...+850 °C
• Resolution: 24 bits
• Very low current consumption
• No external power supply needed
• Warranty: 3 years
• Connection: RJ-11

• Input: 2x thermocouples - J, K, T, N, E, B, R, and S
• Output: Modbus RTU – RS-485
• Resolution: 24 bits with DSP processing
• Working isolation voltage: 1500 Vrms
• Operating temperature / humidity: -20…+60 °C / 10…90% (non-condensing)
• DIN rail mounting
• Power supply: 5…30 Vdc
• Warranty: 3 years

• Air velocity measurement range: 0...2 / 0...10 / 0...20 m/s (selectable via jumper)
• Temperature measurement range: 0...50 °C
• Output: 0...10 V / 4...20 mA
• Option: LCD screen
• Option: relay output
• Supply: 24 VDC/VAC
• Operating temperature: 0...+50°C
• Protection class: IP54

• Maximal pressure measurement range: 0...1000/2000/5000/7000 Pa
• Air flow and velocity measurement
• Output: 0...10 V / 2...10 V or 4...20 mA
• Option: autozero function and LCD screen
• Allowed overpressure: 25 kPa
• Supply: 10...35 VDC
• Operating temperature: -40...+50°C (see datasheet)
• Protection class: IP54

• Temperature measurement range: -30...+80 °C
• Humidity measurement range: 0...100 %
• Output: RS-485 Modbus RTU
• Calculates absolute humidity and dew-point temperature
• Cable length: 2 m / 2 m with M8 connector / 5 m / 10 m
• Operating temperature: -20...+60 °C
• Supply: 9...28 VAC/VDC

Carbon dioxide (CO2) and temperature transmitter with a display CDT2000 Duct. The device is designed for measurement of air parameters in ventilation channels.

• CO₂ range 400...2000 ppm
• Temperature range 0...50 °C

Carbon dioxide (CO₂), temperature and humidity transmitter with a display CDT2000.

• Carbon dioxide (CO₂) range: 400...2000 ppm
• Humidity range: 0...100 % 
• Temperature range: 0...50 °C

Carbon dioxide transmitter CMT is designed for CO concentration measurement. The transmitter is used to control interior ventilation systems.

• CO range 0...300 ppm

• Input: potentiometer / 0...10 V / 4...20 mA / 3,33 mV/V / 2 mV/V / 2.5 mV/V / CANopen
• Analog output: none / 0...10 V / 0...5 V / 0,5...4,5 V / 0...20 mA / 4...20 mA
• Relay output: 2 units
• Communication interface: none / RS-232 / RS-485 / USB / CANopen
• Invertible analogue output (10...0 V, 20...0 mA)
• Fast and easy parameter configuration via USB
• Optional tare function (scaling to zero)
• Supply: 220 VAC / 24 VAC/DC
• Operating temperature: 0...50 °C
• Protection class: IP60 (front)

• Input: potentiometer / 0...10 V / 4...20 mA / 3,33 mV/V / 2 mV/V / 2.5 mV/V / CANopen
• Temperature input: none / Pt100 / Pt1000 / thermocouple
• Analog output: none / 0...10 V / 0...5 V / 0,5...4,5 V / 0...20 mA / 4...20 mA
• Relay output: 3 units
• Communication interface: none / RS-232 / RS-485 / USB / CANopen
• Invertible analogue output (10...0 V, 20...0 mA)
• Fast and easy parameter configuration via USB
• Optional tare function (scaling to zero)
• Supply: 220 VAC / 24 VAC/DC
• Operating temperature: 0...50 °C
• Protection class: IP60 (front)

• Input: potentiometer / 0...10 V / 4...20 mA / 3,33 mV/V / 2 mV/V / 2.5 mV/V / CANopen
• Analog output: none / 0...10 V / 0...5 V / 0,5...4,5 V / 0...20 mA / 4...20 mA (optional: double output)
• Relay output: 4 units
• Communication interface: none / RS-232 / RS-485 / USB / CANopen
• Invertible analogue output (10...0 V, 20...0 mA)
• Fast and easy parameter configuration via USB
• Optional tare function (scaling to zero)
• Supply: 220 VAC / 24 VAC/DC
• Operating temperature: 0...50 °C
• Protection class: IP60 (front)

• To measure air and neutral gases pressure in range -100...100 Pa
• Solenoid valve for auto-calibration: frequency 1…60 min
• Configuration with switches or software: measuring ranges, units, outputs settings
• Housing with simplified mounting system
• Optional with display or without display
• Range: -100...100 Pa
• Accuracy: ± 1 % of reading ± 2 Pa
• Resolution: 1 Pa; 0.1 mmH2O; 0.01 mbar; 0.01 inWG; 0.01 mmHG; 0.1 daPa; 0.001 kPa
• Measurement units: Pa, mmH2O, inWG, mmHG, daPa, kPa, hPa, mbar
• Response time: 0.3 s
• Output: 0-10 V and 4-20 mA
• Overpressure tolerated: 21 000 Pa
• Conditions of use: 0…+50 °C. In non-condensing condition
• Communication to PC: USB-mini DIN cable
• Protection: IP65
• Power supply: 24 V AC / V DC

• To measure air and neutral gases pressure in range -1000...1000 Pa
• Configuration with switches or software: measuring ranges, units, outputs settings
• Housing with simplified mounting system
• Optional with display or without display
• Range: -1000...1000 Pa
• Accuracy: ± 1.5 % of reading ± 3 Pa
• Resolution: 1 Pa; 0.1 mmH2O; 0.01 mbar; 0.01 inWG; 0.01 mmHG; 0.1 daPa; 0.001 kPa
• Measurement units: Pa, mmH2O, inWG, mmHG, daPa, kPa, hPa, mbar
• Response time: 0.3 s
• Output (Optional): 0-10 V ir 4-20 mA: 4-20 mA
• Overpressure tolerated: 21 000 Pa
• Conditions of use: 0…+50 °C. In non-condensing condition
• Communication to PC: USB-mini DIN cable
• Protection: IP65
• Power supply (Optional): 24 V AC / V DC: 16 / 30 V DC

• To measure air and neutral gases pressure in range -2000...2000 mbar
• Configuration with switches or software: measuring ranges, units, outputs settings
• Housing with simplified mounting system
• Optional with display or without display
• Range: -2000...2000 mbar
• Accuracy: ± 1.5 % of reading ± 3 mbar
• Resolution: 1 mbar; 0.1 inWG; 1 mmHG; 1 mmH2O; 1 hPa; 10 daPa; 0.1 kPa; 0.1 PSI
• Measurement units: mbar, inWG, mmHG, PSI, mmH2O, daPa, hPa, kPa
• Response time: 0.3 s
• Output (Optional): 0-10 V ir 4-20 mA; 4-20 mA
• Overpressure tolerated: 4100 mbar
• Conditions of use: 0…+50 °C. In non-condensing condition
• Communication to PC: USB-mini DIN cable
• Protection: IP65
• Power supply (Optional): 24 V AC / V DC: 16 / 30 V DC

• To measure air and neutral gases pressure in range -500...500 mbar
• Configuration with switches or software: measuring ranges, units, outputs settings
• Housing with simplified mounting system
• Optional with display or without display
• Range: -500...500 mbar
• Accuracy: ± 1.5 % of reading ± 3 mbar
• Resolution: 1 mbar; 0.1 inWG; 1 mmHG; 1 mmH2O; 1 hPa; 10 daPa; 0.1 kPa; 0.1 PSI
• Measurement units: mbar, inWG, mmHG, PSI, mmH2O, daPa, hPa, kPa
• Response time: 0.3 s
• Output (Optional): 0-10 V ir 4-20 mA; 4-20 mA
• Overpressure tolerated: 1400 mbar
• Conditions of use: 0…+50 °C. In non-condensing condition
• Communication to PC: USB-mini DIN cable
• Protection: IP65
• Power supply (Optional): 24 V AC / V DC; 16 / 30 V DC

• PID controller
• 2 set points (SP), chosen by binary input
• Pressure measurement range: -250...2500 Pa
• Output: 0...10 V
• Input: NTC10, NTC20, Pt1000, Ni1000
• LCD screen
• Temperature compensation
• Allowed overpressure: 25 kPa
• Supply: 24 VDC/VAC
• Operating temperature: -20...+50°C
• Protection class: IP54

• Maximal pressure measurement range: 0...2500 Pa
• 8 field selectable measurement ranges (via jumper)
• Output: 4...20 mA
• Option: LCD screen
• Allowed overpressure: 25 kPa
• Supply: 10...35 VDC
• Operating temperature: -10...+50°C
• Protection class: IP54

• Two pressure transmitters in one device
• Pressure measurement range: -250...2500 / -250...7000 Pa
• Option: DPT-DUAL-MOD-AHU – with air flow transmitter
• Output: Modbus RTU
• Allowed overpressure: 25 kPa
• Supply: 24 VDC/VAC
• Operating temperature: -20...+50°C
• Protection class: IP54

• Pressure measurement range: -250...2500 / -250...7000 Pa
• Input: 2 x  0...10 V, NTC10k, Pt1000, Ni1000, binary
• Output: Modbus RTU
• Temperature compensation in range of 0...50 °C
• Allowed overpressure: 25 kPa
• Supply: 24 VDC/VAC
• Operating temperature: -20...+50°C
• Protection class: IP54

Differential pressure transmitter with Modbus interface DPT-MOD-2000, DPT-MOD-3000 and DPT-MOD-5000 for usage in air and non-aggressive gasses.

Differential 8 range pressure transmitter DPT250, DPT2500 and DPT7000. Designed for usage in air and non-aggressive gasses.

• Pressure measurement range: from 0...1 bar to 0...6 bar
• Made to be used for air-conditioning, heating and water systems
• For neutral fluids and non-aggressive gases, compatible with refrigerants
• Output: 4...20 mA
• Supply: 24 VDC/VAC
• Operating temperature: -20...+80°C
• Protection class: IP65

• Input: differential pressure
• Typical areas of use are chemical industry and process engineering
• Measurement range: 75 mbar...70 bar
• Output: 4...20 mA HART
• Supply: 12...30 VDC
• Operating temperature: -40…+85 °C
• Protection class: IP65
• Process connection: 1/4-18NPT

• Pressure range: from 0...1 to 0...16 bar
• Output signal: 4 ... 20 mA (P1–P2)
• Process temperature: -25...+125 °C
• Process connection: G1/4" f
• Protection class: min. IP65

• PID controller
• Pressure measurement range: 0...2500 Pa / 0...7000 Pa
• Switchable between air flow and pressure measurement
• Output: 0...10 V / 4...20 mA
• Option: autozero function
• Allowed overpressure: 25 kPa
• Supply: 24 VDC
• Operating temperature: -20...+50°C
• Protection class: IP54

• PID controller
• Pressure measurement range: 0...2500 Pa
• Modbus RTU communication
• Control output: 0...10 V
• External input: 0...10 V / thermistor / binary
• LCD display
• Temperature compensation
• Allowed overpressure: 25 kPa
• Supply: 24 VDC
• Operating temperature: -20...+50°C
• Protection class: IP54

Duct temperature transducer with 4...20 mA output is built in a durable watertight case. The length of stainless steel stem is 120 mm. Calibration certificate is included.

Duct temperature transducer with 0...10 V output is built in a durable watertight case. The length of stainless steel stem is 120 mm. Output temperature range is user adjustable. Calibration certificate is included.

The FPI 8237 IO-Link Flush Membrane pressure transmitter impresses with an absolutely smooth and robust flush-mounted measuring diaphragm made of corrosion-resistant duplex steel 1.4462. Trafag’s proprietary thin-film-on-steel sensor technology ensures a wide temperature range and excellent long-term stability.

• Measuring range: -0,5...0,5 to 0...100 bar
• Output signal: IO-Link 1.1, COM3, min. process cycle time 1 ms, Smart Sensor Profile ED2, 2 Switching outputs PNP / NPN / Push-Pull configurable
• Accuracy at 25°C typically: ± 0.5 % FS typ.
• Measuring principle: Thin-film-on-steel
• Media temperature –10... +125 °C
• Ambient temperature: –10...+125 °C
• Protection class: IP65, IP67
• Applications: Hydraulics, Machine tools, Process technology, Food industry, Water treatment

The FPT 8236 pressure transmitter impresses with an absolutely smooth and robust flush-mounted measuring diaphragm made of corrosion-resistant duplex steel. Trafag’s proprietary thin-film-on-steel sensor technology ensures a wide temperature range and excellent long-term stability.

• Measuring range: 0.5...0.5 to 0...100 bar (-5...10 to 0...1500 psi)
• Output signal: 4...20 mA, 0...5 VDC, 1...6 VDC, 0...10 VDC, 0.5…4.5 VDC ratiometric
• Accuracy at 25°C typically: ± 0.5 % FS typ.
• Membrane in Duplex steel 1.4462
• Pressure connection: G1/2” male, flush membrane
• Media temperature –10... +125 °C
• Ambient temperature: –10...+125 °C
• Applications: Machine tools, Food Industry, Process technology, Water treatment, Hydraulics

• Temperature measurement range: 0...50 °C
• Humidity measurement range: 0...100 %
• Output: 2 x 0...10 V / 2...10 V / 4...20 mA
• Option: LCD display
• Option: relay output
• Option: Modbus RTU
• Supply: 24 VDC/VAC
• Operating temperature: 0...50 °C
• Protection class: IP20

• Temperature measurement range: 0...50 °C
• Humidity measurement range: 0...100 %
• Output: 2 x 0/2...5/10 VDC
• Option: LCD display
• Option: Modbus RTU
• Supply: 24 VDC/VAC
• Operating temperature: 0...50 °C
• Protection class: IP54

• Temperature measurement range:
  a) Ambient model: -20...+80 °C
  b) Remote model with polycarbonate probe: -20...+80 °C
  c) Remote model with stainless steel probe: -40...180 °C
• Relative humidity measurement range: 0...100 %
• Calculates dew point, absolute humidity, enthalpy and combination ratio
• 4-wire analog output: 0...5/10 V or 0/4...20 mA
• 2 relay outputs
• Versions with or without display
• Protection class: IP65 (ABS V0 housing)

• Hydrogen pressure transmitter’s measuring principle: Thin-film-on-steel
• EC79 and ECER-134 certification pending (see product website for current situation)
• Applications: Fuel cells, fueling stations, hydrogen compressors, hydrogen tanks, vehicles with H drive
• Measuring range: 0…1050 bar / 0…15000 psi *(see product datasheet)
• Measuring accuracy at 25 °C typ.: ± 0.3 / 0.5 % FS typ.
• Output signal: 4...20 mA, 0.5...4.5 VDC, 0...5 VDC, 1...5 VDC, 1...6 VDC, 0...10 VDC, 0.1...10.1 VDC, 0.5...4.5 VDC ratiometric, Switching output: 1 or 2 PNP
• Pressure connections: G1/4" m, 1/4"NPT m, 7/16"-20UNF SAE4 m
• Ambient temperature: 40°C…+85°C

• Industrial pressure transmitter’s measuring principle: Thin-film-on-steel
• Applications: hydraulics, industrial applications, machine tools
• 5-fold overpressure resistance
• Measuring range: 0...2.5 / 0...700 bar // 0...30 / 0...10000 psi
• Measuring accuracy at 25 °C typ.: ± 0.5 % FS typ. ± 0.3 % FS typ
• Output signal: 4...20 mA, 0...5 VDC, 0.5...5 VDC, 1...6 VDC, 0...10 VDC, 0.5…4.5 VDC ratiometric
• Ambient temperature: -40°C…+125°C

• Various level measurement ranges: 1...250 m H2O
• Accuracy: ≤ ± 0.10 % FS
• Output: 4...20 mA
• Process temperature: -5...80 °C
• Operating temperature: -5...80 °C
• Materials: stainless steel, titanium
• Certificates: ATEX, IECEx

• Various level measurement ranges: 1...250 m H2O
• Accuracy: ≤ ± 0.25 % FS
• Output: 0...5 VDC / 0...10 VDC / 4...20 mA
• Process temperature: -5...80 °C
• Operating temperature: -5...80 °C
• Materials: stainless steel

• Various level measurement ranges: 1...250 m H2O
• Accuracy: ≤ ± 0.50 / 0.25 / 0.10 % FS
• Output: 0...5 VDC / 0...10 VDC / 0...20 mA / 4...20 mA
• Process temperature: -5...80 °C
• Operating temperature: -5...80 °C
• Materials: stainless steel, titanium

• Various level measurement ranges: 1...250 m H2O
• Accuracy: ≤ ± 0.50 / 0.25 / 0.10 % FS
• Output: 0...5 VDC / 0...10 VDC / 4...20 mA
• Process temperature: -5...80 °C
• Operating temperature: -5...80 °C
• Materials: stainless steel
• Diameter: 19 mm

• Various level measurement ranges: 1...250 m H2O
• Accuracy: ≤ ± 0.50 / 0.25 / 0.10 % FS
• Output: 4...20 mA
• Process temperature: -5...80 °C
• Operating temperature: -5...80 °C
• Materials: stainless steel, titanium
• Certificate: ATEX

• Various level measurement ranges: 10...100 m H2O
• Accuracy: ≤ ± 0.50 / 0.25
• Output: 0...10 VDC / 4...20 mA
• Process temperature: -5...50 °C
• Operating temperature: -5...50 °C
• Materials: stainless steel, titanium
• Diameter: 10 mm

• Various level measurement ranges: 1...250 m H2O
• Accuracy: ≤ ± 0.25 / 0.10 % FS
• Adjustable 1:4 of the nominal range within -5 % to +105 %
• Recalibration with software possible
• Output: 4...20 mA
• Process temperature: -5...80 °C
• Operating temperature: -5...80 °C
• Materials: stainless steel, titanium

• Various level measurement ranges: 1...250 m H2O
• Accuracy: ≤ ± 0.25 / 0.10 % FS
• Adjustable 1:4 of the nominal range within -5 % to +105 %
• Output: 4...20 mA
• Process temperature: -5...80 °C
• Operating temperature: -5...80 °C
• Materials: stainless steel, titanium
• Certificate: ATEX

• Long-lasting stainless steel screw electrodes
• Measurement range: 7...20 % (-40...+125 °C)
• Resolution: 0,1 %
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Electrode cable: FEP, -50...+200 °C, 5/10/15 m
• Timber temperature compensation
• Electrode length: 15 / 25 mm
• Supply: 11...30 VDC
• Protection class: IP68

• Pressure range: from 0...2,5 to 0...700 bar
• Process temperature: -40...+125 °C
• Process connection: G1/4" m, G1/4" m (Manometer), 1/4"NPT m, 1/8"NPT m, 7/16"-20UNF SAE J512 f, 7/16"-20UNF SAE4 m, 7/16"-20UNF m DIN3866, R1/4" m DIN3858, R1/4" m DIN2999, R1/8" m, M10x1 m, M12x1.5 m
• Protection class: IP65, IP67

The small sensor dimension combined with IO-Link, the pressure and temperature value of the media make the NAI 8273 the ideal choice in various applications.

• Measuring range: -0.2...0.2 to 0...700 bar
• Output signal: IO-Link 1.1, COM3, min. process cycle time 1 ms, Smart Sensor Profile ED2, 2 Switching outputs PNP / NPN
• Accuracy at 25°C typically: ± 0.3 % FS typ., ± 0.5 % FS typ.
• Measuring principle: Thin-film-on-steel
• Media temperature –40... +125 °C
• Ambient temperature: –40...+125 °C
• Protection class: IP65, IP67
• Applications: Hydraulics, Machine tools, Process technology

• Pressure transmitter ATM (analog output)
• Pressure measurement range: from 0 to 0,1...1000 bar
• Accuracy: < ± 0,50 / 0,25 / 0.10 % FS
• Output: 0...5 VDC / 0...10 VDC / 0...20 mA / 4...20 mA
• Process connection: G 1/4 F, 1/4 NPT, 1/2 NPT, G 1/4 M, G1/2 M
• Process temperature: -40...150 °C
• Operating temperature: -25..85 °C
• Materials: stainless steel, titanium