Поиск

• Прибор предназначен для преобразования и галванического разделения стандартных сигналов постоянного тока и напряжения и установления индивидуальной характерисики выходного сигнала.
• Вход гальванически изолирован от выхода и источника питания.
• Программирование прибора выполняется с помощью программатора PD14 и бесплатной программой LPConfig.

• Interface: Ethernet (Modbus TCP), RS485 (Modbus RTU Master / Slave), RS232 (Slave)
• Webserver
• Functional Block programming software
• LED signaling for Link/Act Ethernet, serial RX-TX, power supply
• Configurable by the software DEV9K
• Galvanic isolation on all the ways (1500 VAC)

​

• Interface: Ethernet (Modbus TCP), RS485 (Modbus RTU Master / Slave), RS232 (Slave)
• Webserver
• Functional Block programming software
• LED signaling for Link/Act Ethernet, serial RX-TX, power supply, digital inputs and digital outputs state
• Configurable by the software DEV9K
• Capable to connect the sensors to the analog inputs
• Galvanic isolation on all the ways (1500 VAC)

• Input: 4x RTD (Pt100, Pt1000, Ni100, Ni1000), resistive and potentiometer configurable input
• Output: RS-485 Master/Slave and RS-232 (MODBUS RTU/ASCII protocol)
• 2000 VAC galvanic isolation
• High accuracy
• EMC compliance - CE symbol
• Mounting on DIN rail - EN-50022 complience
• Supply voltage: 10...30 VDC
• Ambient temperature: -10...+60°C

• Signal splitter DAT5022
• Configurable with switches on body
• 3-way galvanic isolation (2000 VAC)
• Input: 4...20mA, 0...20mA, 0...10V, 0...5V, 2...10V, 1...5V
• Output: 2 X (4...20mA, 0...20mA, 0...10V, 0...5V, 2...10V, 1...5V)
• Power Supply: 18...32 VDC. Reverse polarity protection 60 VDC
• Current Consumption: Current output 35 mA max. Voltage output 25 mA max.
• Environment: -20...+70 °C / (non-condensing) 0-90%
• Housing: Self-extinguishing material
• EMC
  • Immunity: EN 61000-6-2
  • Emission: EN 61000-6-4

• Ethernet 10/100 Base-T Modbus TCP interface (RJ-45 connector)
• Configurable using webserver
• RS-485 (Modbus RTU Master)
• Distance up to 1200 m, up to 32 modules
• LED indication
• Galvanic isolation in all ways (1500 VAC)
• EMC compliance
• Mounting on DIN rail - EN-50022 compliance

• Modbus Slave over RS-485
• Modbus RTU / Modbus ASCII protocols
• Communication parameters configurable by dip-switches
• Watch-dog alarm
• Remotely configurable
• 3-way galvanic isolation (1500 VAC)
• High accuracy
• Mounting on DIN rail - EN-50022 compliance

• Ethernet 10/100 Base-T interface
• Modbus TCP server
• Webserver for configuration of device and representation of actual input values
• Galvanic isolation on all the ways (1500 VAC)
• Remotely configured
• LED indication
• EMC compliance
• DIN rail mounting

• Self-operating signal lamps (optic signaling of AC/DC voltage presence in 1-phase network via lighting of one non-replaceable LED)
• LED colors: green, red, yellow
• Cover - modular, width 17,5 mm
• Direct mounting on 35 mm rail mount acc. to EN 60715
• Applications: in low-voltage systems (130…260 V)
• Compliance with standards: EN 62094-1, EN 61000-4-2, 3, 4, 5, 6, 11
• Recognitions, certifications, directives: RoHS, CE, EAC, UKCA

• Self-operating signal lamps (optic signaling of AC/DC voltage presence in 3-phase network – 3(N) 400 / 230 V via lighting of one non-replaceable LED)
• LED colors: green, red, (red, yellow, green)
• Cover - modular, width 17,5 mm
• Direct mounting on 35 mm rail mount acc. to EN 60715
• Applications: in low-voltage systems (400 / 230 V)
• Compliance with standards: EN 62094-1, EN 61000-4-2, 3, 4, 5, 6, 11
• Recognitions, certifications, directives: RoHS, CE, EAC, UKCA

• EDP2041 is standard signals generator (digital potentiometer) with outputs:
  • 0…10 V; Resolution: 1 mV; Fluctuation: max 30 mA; Rise time from 0 to 10V is max. 300ms
  • 0 / 4…20 mA; Accuracy: 0.1 %; Resolution: 2 µA; Fluctuation: max. 60 µA
• Preset value can be adjusted from external buttons
• Communication via RS-485 Modbus protocol or synchronous running between two or more potentiometers
• Display scale can be adjusted between -1999 and 9999
• Soft on and soft off properties can be selected
• 4 digits display
• Parameter access protection on 3 levels
• Supply: 230 V AC; 24 V AC; 9…30 V DC
• Ambient temperature: 0…50 °C

Sensor SKU: 5905309601192 (IP30)

Sensor SKU: 5905309601482 (IP67)

Wireless 4…20 mA / 0…10 V analog signal data logger, sensor interface, BLE allows users to connect analog sensors to the cloud**. Device can be equipped with up to four analog interfaces / transducers (2 x 4…20 mA and 2 x 0…10 V). Transducer can be powered* either from the device’s battery or by an external power source.

You can use a free mobile application to configure the device and read the data from its memory. If you add Efento Gateway, you can build a remote monitoring system.

• Communication: BLE (Bluetooth Low Energy)
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery (on request 1000 mAh rechargeable battery (USB 5V))
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• External transducers can be powered by the device's battery (max. 16V, 30 mA)
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -15…+70 °C / 0…99 %
• Case IP30 protection (IP 67 on request)

Sensor SKU: 5905309600072 (IP30)

Sensor SKU: 5905309600607 (IP67)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud** platform or any other third party systems.

• Wireless 4…20 mA / 0…10 V analog signal sensor interface, data logger, NB-IoT measures analog readings and can send data over NB-IoT
• Device can be equipped with up to four analog interfaces / transducers (2 x 4…20 mA and 2 x 0…10 V)
• Transducer can be powered* either from the device’s battery or by an external power source
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -35…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection (IP67 on request)

• The module setting can be done through USB or one of the RS-485 (master/slave) interface using the available for free eCon program
• Possibility of connection via internal RS-485 port in order to increase no of analog outputs in network
• Master Modbus function dedicated to read out data from other RS-485 devices and to scale analog value.
• Slave Modbus function to set the signal on analog outputs
• Possibility of configuration through USB without power supply