Поиск

• Universal air and environment quality sensor E2-CO2-series measures CO₂ (carbon dioxide) level, temperature, humidity, pressure, sound level, ambient light (LUX). Transmits instant values, average hourly values, and average 24-hour values
• Communication: wM-BUS EN13757-3/4:2013, complies OMS 4.0.2
  • Modes: C1-A/B, T1 or S1 (selectable on order)
• Measurement ranges
  • Temperature: -40…85 °C
  • Humidity: 0…100 % RH (non-condensing)
  • CO2: 0…5000 ppm (0…55 °C)
  • LUX: 0,01…83000 LUX at same frequency as the human eye
  • Absolute pressure: 20…100 kPa
  • Sound level: 53…90 dBa at 850 Hz
• Measurement accuracy
  • Temperature: ± 0,2 at +5…+60 °C; ± 0,5 at -20…+85 °C
  • Humidity: ± 2 % RH at 20…80 % RH; ± 3 % RH at 10…90 % RH; ± 3,5 % RH at 0…100 % RH
  • CO2: ± (50 ppm + 3%)
  • LUX: 4 %
  • Pressure:  0,4 kPa
• CO2 sensor calibrates every 20 days
• Warnings about low battery, CO₂ sensor malfunction, calibration not performed yet
• Transmission interval: every 90 seconds
• Measured values sample interval: every 6 minutes
• LED and sound indication about CO₂ exceeded limit
• Device has 2 antennas for maximum range in both vertical and horizontal directions
• Power supply: 2 x ER18505 3.6 V Li-SOCI2 battery pack (8200 mAh)
  • Up to 14 years battery lifetime, standard configuration and operating temperature

• Process flanges according to: EN 1092-1, DIN 2527, ASME B 16.5
• Standard instrument threads (F): G1/2", G1/4"
• Dimensions according to customer's needs
• Case production: welded or solid (flange welded)
• Available materials: 1.4301(AISI304), 1.4401 (AISI316), 1.4404 (AISI316L)
• Dimension tolerances according to DIN ISO 2768
• Available other materials, threads, flanges and dimensions

SKU: 5905309602212

• Efento Gateway automatically transfers gathered data from Efento BLE (Bluetooth Low Energy) sensors to Efento Cloud or any other IoT platform over 4G LTE
• Gateway stores 500,000 measurements in its buffer memory in case the connection to Efento Cloud is lost, it will send the measurements right after connection is restored
• If Gateway used without Efento cloud it can store sensors data in its memory
• In local mode you can check the current and historical measurements (table/chart) and export the data in a form of CSV report
• Gateway communicates with sensors wirelessly over BLE. The maximum distance between Gateway and sensor is 100 m in the open space and 20 – 30 m in the buildings
• One gateway supports up to 128 Efento sensors
• Gateway can be integrated with any cloud platform or software that supports HTTP protocol (REST API)
• Setup takes under 5 minutes and can be completed using a smartphone with a free mobile app
• SIM card slot for LTE Cat 1 connection
• Power supply: 5 V, 1 A (USB-C)
• Backup battery: LI-Po, 1900 mAh (up to 12 hours backup power)
• Operating temperature: 0…+40 °C

SKU: 5906660327066

• Efento Gateway automatically transfers gathered data from Efento BLE (Bluetooth Low Energy) sensors to Efento Cloud or any other IoT platform
• Gateway stores 500,000 measurements in its buffer memory in case the connection to Efento Cloud is lost, it will send the measurements right after connection is restored
• If Gateway used without Efento cloud it can store sensors data in its memory
• In local mode you can check the current and historical measurements (table/chart) and export the data in a form of CSV report
• Gateway communicates with sensors wirelessly over BLE. The maximum distance between Gateway and sensor is 100 m in the open space and 20 – 30 m in the buildings
• One gateway supports up to 128 Efento sensors
• Gateway can be integrated with any cloud platform or software that supports HTTP protocol (REST API)
• Configuration of Efento Gateway using any internet browser over LAN
• Ethernet connection for data transfer
• Power supply: 5 V, 1 A (mini USB)
• Operating temperature: 0…+40 °C

Kuhlmann Ground Thawing Blankets are durable and weatherproof, designed to thaw frozen ground and soil, pipes, and protect equipment from freezing. They also work as curing blankets for various construction purposes.

Technical specifications:

• Durable PVC materials.
• Fixed temperature (70°C).
• 2-meter power cable.
• Special sizes produced upon request.
• IP67 Class.
• In normal conditions the mat thaws up to 30 cm of soil in 24 hours - or up to 60 cm in more sandy soil/ground.

• The battery or mains powered wireless M-Bus gateway B4 is highly configurable plug-and-play device used for collecting data from Wireless M-Bus meters / sensors and transmitting the data using LTE CAT-M1 and MQTT protocol
• Long range and high sensitivity internal (or external mounted) antennas
• To maximize the battery lifetime possible configuration to listen number of minutes, specific time during day, specific days and limit number of packets stored per meter / week / day / hour
• The gateway firmware can be upgraded remotely using MQTT
• B4 series gateway can be used with Lansen R4 series repeaters and transmit additional information (see datasheet)
• Configuration can be done with: Lansen Wireless M-BUS programming dongle together with our program, Lansen Configurator, other wireless M-BUS transmitters or remotely using the MQTT protocol
• Possible to activate 128 bit AES-key encryption
• Gateway suited for harsh environments, operating temperature: -30…+85 °C, protection class: IP40, IP65 and IP67
• IoT LTE M SIM card needed (acquired separately)

The PD9W is an industrial RS-232 / RS-485 to WiFi and Ethernet converter.

• Communication interfaces: 1x RS485, 1 x RS232, 1x Ethernet and WiFi (802.11b/g/n)
• Modes: AP, STA, AP + STA, AP + LAN, AP + WAN, Route and Bridge
• Work modes: transparent transmission mode, serial port command mode, HTTP Client mode, Modbus TCP<=>Modbus RTU mode and AT command mode
• Configuration the parameters via the WEB server
• RS232 port for RTS/CTS signals
• Hardware Watchdog, Heartbeat
• Electrostatic protection 15 / 8 kV
• Power supply: 5…36 V dc

PD9-Modbus RS485 to Ethernet converter can realize bidirectional transparent transmission between RS485 and Ethernet. It carries ARM processor, low power, fast speed, high stability. Via web-page or software, Rs-485 to Ethernet Converter can realize serial data and TCP/IP data package transparent transmission.

• Communication interfaces: 1x RS485, 1x Ethernet WAN/LAN
• Easy configuration the parameters via the webpage or set-up software
• Compact size, DIN rail mount
• Working mode: TCP server, TCP client, UDP server, UDP client
• Modbus RTU to TCP conversion, Modbus Polling
• DHCP support, IP dynamic or static
• Watchdog function
• Working temperature: -40…85°C
• Power supply: 5…36 V dc

• MA series converters reads Wired M-Bus meters and transmit the data wirelessly using the Wireless M-Bus protocol
• Reads data from up to 500 devices
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: T1
• AES-128 encryption mode 5, profile A
• Automatically search wired meters and sends data
• Two internal antennas or one external antenna
• Power supply: 100…240 VAC
• Protection class: IP67

Broadsens edge-computing wireless gateways connect and control multiple wireless low-power sensors such as SVT200-A, SVT300-A, SVT400-A, SVT200-V, SVT300-V and SVT400-V.

BroadVibra software is installed inside the wireless gateway. The software has intuitive interface and can be accessed from all major web browsers remotely. The software is ideal for predictive maintenance and conditional based monitoring.

• Communication with sensor: 2.4GHz BLE
• Up to 190 sensors supported
• Network interface: Ethernet, Wi-Fi 802.11ac wireless
• Communication protocol: MQTT, TCP/IP, UDP, Modbus TCP & RTU (RS-485), OPC UA
• Integrated Database: 64 / 128 GB
• Notifications and alarms sent by email (SMTP)
• Vibration analysis: Velocity, RMS, True peak, Peak-peak, STD, Crest factor, Kurtosis, trend analysis, FFT analysis, advanced filtering, frequency fine tuning, trigger modes
• Working environment: -30...+60 °C, 10...90 %RH
• Additional features: 2nd power connector, 2 x GPIO ports (input or output, see manual)

LoRa-Log-Meter is a wireless data logging system based on LoRaWAN communication technology. It is designed to collect data from LoRaWAN devices such as sensors, interfaces, and meters that monitor environmental, technological and industrial process parameters and transmit data packets to a LoRaWAN gateway.

Collected data is processed and stored in the gateway, and can be accessed via a web browser.

• Compatible with Synetica and others LoRaWAN devices: analog inputs (4–20 mA, 0–20 mA, 0–10 V), temperature sensors, pulse inputs (SO, NC/NO contacts) and others
• Individual alarm notifications based on specific sensors or contacts
• Alarm notifications via email and SMS
• Logging and review of errors and communication issues
• Remote access to the LoRa-Log-Meter system via 4G LTE, Wi-Fi, or LAN (Ethernet)
• Dynamic data visualization in graph (curve) format via a web browser
• Data export in CSV and PNG formats
• Password-protected user interface
• No subscription required for the gateway or sensors
• Remote configuration of data transmission intervals for devices via a web browser
• Communication range from sensor to gateway:
  • 15 km Outdoors (in plain sight)
  • 50–200 meters indoors or up to 7–8 walls*
• LoRaWAN devices powered by: 2 × AA 3.6 V lithium batteries or 5 V USB power

• Device G2-DC designed to monitor state of relays or reed switches
• Input: 2 dry contacts
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: C, T, or S (selectable on order)
  • Standard T1-mode, transmission 90 seconds, encryption ON
• Transmission interval: configurable 60 s…1 h (selectable on order)
• Every message contains the contact status and battery level
• The message is sent as soon as a dry contact switch is detected
• AES-128 encryption mode 5, profile A (can be ordered with custom configuration)
• Power supply: 3.6V Li-SOCl2, AA battery
  • Warning about low battery
  • Up to 14 years battery lifetime, depending on configuration and operating temperature
• Operating temperature: -30…+85 °C (Recommended: +5…50 °C) (none condensing)

• G2-P pulse counter converts wired consumption meter into a wireless meter
• Types of devices: water, electricity, HCA, room sensor devices, etc.
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: configurable C, T, or S
  • AES-128 encryption mode 5, profile A
• Value format: 0,001...10000 / pulse (configurable). Unconverted dimensionless value
• The total number of pulses is sent periodically
• It is possible to count pulses from two devices simultaneously
• Pulses from the electricity meter LEDs can also be counted using an optical probe (only one optical probe can be mounted)
• Transmission interval: configurable 60 s…1 hour
• Tamper protection
• Operating temperature: -30…+85 °C none condensing (recommended +5…+50 °C)
• Power supply: AA battery 3.6 V Li-SOCI2
  • Battery lifetime up to 14 years, depends on configuration and operating temperature

• Range Extender increases the receiving range of the wM-BUS gateway up to 2x or more
• Filters out interferences such as 4G, LTE, TV and WLAN
• Communication: wM-BUS protocol EN13757-3/4:2013
  • Modes: S1, C1 and T1
• Complies with the OMS standard
• Only receive signals (Rx)
• Connected between antenna and gateway using standard SMA connector
• Mountable on DIN rail
• Power supply: 12…24 V AC / DC
• Working temperature: -40…85 °C

• R4 series repeaters have multihop routing function (up to 4 repeaters connected in serial)
  • uR (microreapeater) – only retransmits data of sensors to repeater
• Communication: Wireless M-BUS (868MHz) EN 13757-3/4:2013
  • Modes: T, C and S
• Complies with the OMS standard, OMS 4.0.2
• Support up to two external antennas or one vertical and one horizontal internal antenna (depending on model)
• Supports routing of Security profile A and B according to OMS 4
• Ability to forward messages of 932 devices
  • uR (microreapeater) - forward messages of 100 devices
• Flexible time settings of data collection and transmission
• Enclosure protection (selectable):IP40 (indoor) or IP65 / IP67 (outdoor)
• Battery lifetime: 10+ years (depending on the configuration)
• Power supply
  • Internal battery: 3.6 V Li-SOCI2
  • Mains: 100-240 V AC
  • 24 V AC / DC (on request)
• Operating temperature: -35…+85 °C

• Sensor C-TH measures ambient temperature and humidity
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: C, T, or S*
• Measurement ranges
  • Temperature: -40…+85 °C
  • Humidity: 20…80 % RH (non condensing)
• Measurement accuracy
  • Temperature: ± 0,2 °C in the range of 0…65 °C
  • Humidity: ± 2 % RH in the range of 20…80 %
• Transmission interval: 60 s…1 hour*
• AES-128 encryption mode 5, profile A, custom KEY
• Power supply: ER14505 3.6V Li-SOCl2 battery (soldered)
  • 14 years expected, standard configuration and operating temperature

• Sensor CX-TH measures ambient temperature and humidity
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: C, T, or S *
• Measurement ranges
  • Temperature: -40…+85 °C
  • Humidity: 20…80 % RH (non condensing)
• Measurement accuracy
  • Temperature: ± 0,2 °C in the range of 0…65 °C
  • Humidity: ± 2 % RH in the range of 20…80 %
• Transmission interval: 60 s…1 hour*
• AES-128 encryption mode 5, profile A, custom KEY
• Power supply: ER14505 3.6V Li-SOCl2 battery (soldered or optional battery holder)*
  • 14 years expected, standard configuration and operating temperature
• Operating temperature: 0...+55 °C
• * - T1-mode, 150 seconds, Encryption ON, unique key (individual options should be stated before order)

• Sensor O-TH designed to measure temperature and humidity in outdoor
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: C, T, or S (selectable on order)
  • Standard T1-mode, transmission 90 seconds, encryption ON
  • AES-128 encryption mode 5, profile A (can be ordered with custom configuration)
• Measurement range
  • Temperature: -40…+85 °C
  • Humidity: 0…100 % RH (none condensing)
• Accuracy
  • Temperature: ± 0,2 at 0..+85 °C and ± 0,3 at -40…+85 °C
  • Humidity: ± 2 %RH
• Transmission interval: custom ordered 60 s…1 h (standard 90 s)
• AES-128 encryption mode 5, profile A (can be ordered with custom configuration)
• Power supply: 3.6 V Li-SOCI2, ER17505 battery
  • Warning about low battery
  • Battery lifetime up to 16 with standard configuration and operating temperature
• Operating temperature: -30…+85 °C (Recommended: -20…+50 °C)

• Sensor O-T-H designed to measure temperature in harsh environment
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: C, T, or S (selectable on order)
  • Standard T1-mode, transmission 90 seconds, encryption ON
  • AES-128 encryption mode 5, profile A
• Measurement range
  • Temperature: -40…+85 °C
• Accuracy
  • Temperature: ± 0,2 at 0..+85 °C and ± 0,3 at -40…+85 °C
• Transmission interval: custom ordered 60 s…1 h
• Power supply: ER17505 3.6V Li-SOCl2, battery
  • Warning about low battery
  • Battery lifetime up to 14 years, depending on configuration and operating temperature
• Operating temperature: -35…+85 °C (Recommended: -30…+50 °C)

• Sensor O-EXT measures temperature with external probes in outdoor (IP66-casing)
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: custom ordered C, T, or S (standard T-mode)
• Measurement range: -40…+125 °C
  • Accuracy: ± 0,5 °C
• Up to 4 external 1-wire probes can be connected
• Transmission interval: custom ordered 300 s…1 h (standard 5 min)
• AES-128 encryption mode 5, profile A (key unique to each device)
• Power supply: battery 3.6 V Li-SOCI2
  • Continuous battery level monitoring
    • Battery lifetime up to 16 years at 25 °C with standard configuration
• Operating temperature: -40…85 °C

• Sensor G2-EXT measures temperature with external probes
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: C, T, or S (configuration on order)
  • AES-128 encryption mode 5, profile A (configuration on order ON / OFF)
  • Standard: T1-Mode, 5 min.Encryption ON
• Measurement range: -55…+125 °C
  • Accuracy: ± 0,5 °C
• Up to 4 external 1-wire DS18B20+ probes can be connected
• Warnings about low battery, case opened or removed from wall (opt.) or sensor not working
• Transmission interval: configurable 60 s…1 hour
• Operating temperature: -30…85 °C (recommended: +5…+50 °C) (non condensing)
• Power supply: ER14505 battery 3.6 V Li-SOCI2
  • Battery lifetime up to 14 years, depends on configuration and operating temperature

• Sensor E2-VOC measures VOC (Volatile organic compounds), ambient temperature and humidity, transmits instant values, average hourly values, and average 24-hour values
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: T (C or S can be custom ordered)
  • AES-128 encryption mode 5, profile A
• Measurement range
  • Temperature: -40…+85 °C
  • Humidity: 0…100 % RH (non condensing)
  • VOC: 0…60000 ppb
• Measurement accuracy
  • Temperature: ± 0,2 °C in the range of +5…+55 °C
  • Humidity: ± 2 % RH in the range of 10…90 %
  • VOC: typical ± (15…25 %) of value at 25 °C / 50 % RH
• Transmission interval: 90 s both sampling and sending. Custom sending interval on request (60 s…1 hr)
• Device has 2 antennas for maximum range in both vertical and horizontal directions
• Power supply: 2 x ER18505 3.6 V Li-SOCI2 battery pack (8200 mAh)
  • Battery lifetime up to 14 years, depends on configuration and operating temperature

• Water leakage detector G2-LD detects leakage with active 1 meter cable
• Up to 2 leakage cables mountable
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: configurable C, T, or S (configurable)
  • AES-128 encryption mode 5, profile A
• Transmission interval: configurable 60 s…1 hour
• Operating temperature: -30…+85 °C (recommended +5…+50 °C) (None condensing)
• Warnings about low battery, case opened or removed from wall (opt.), leakage detected (red LED)
• Power supply: ER14505 3.6 V Li-SOCI2 battery
  • Battery lifetime up to 14 years, depends on configuration and operating temperature

High-precision sensors in a pre-assembled enclosure box, designed to measure pH in irrigation water for horticulture. This device, belonging to the PRO sensor series, includes Aranet Sub-GHz ISM band radio which wirelessly transmits sensor measurements to the Aranet PRO base station.

• pH level measurement range: 0…14
• pH sensor operating temperature: 0…+60 °C
• Wireless data transmission and grid-powered
• Kit contains: 4…20 mA transmitter with 24 VDC PSU, Glass pH probe, pH 4…20 mA module
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min                    
• For more accurate measuring use sensor in combination with Horticulture Drainage sensor
• For proper use see user manual

Soil moisture sensor that helps to ensure necessary watering level for optimal plant growth. This device, belonging to the PRO sensor series, includes Aranet Sub-GHz ISM band radio which wirelessly transmits sensor measurements to the Aranet PRO base station.

• Soil moisture measurement range: 0…100 %
• Resolution: 0,1 %
• Accuracy: ± 15 %
• Available cable lengths: 1,5 m / 5 m / 10 m / 20 m
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Data encryption
• Supply: 1 x AA battery
• Battery lifetime (20 °C): up to 10 years
• Operating temperature: -2…45 °C
• Protection class: IP67