Поиск

• Sensor O-TH designed to measure temperature and humidity in outdoor
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: C, T, or S (selectable on order)
  • Standard T1-mode, transmission 90 seconds, encryption ON
  • AES-128 encryption mode 5, profile A (can be ordered with custom configuration)
• Measurement range
  • Temperature: -40…+85 °C
  • Humidity: 0…100 % RH (none condensing)
• Accuracy
  • Temperature: ± 0,2 at 0..+85 °C and ± 0,3 at -40…+85 °C
  • Humidity: ± 2 %RH
• Transmission interval: custom ordered 60 s…1 h (standard 90 s)
• AES-128 encryption mode 5, profile A (can be ordered with custom configuration)
• Power supply: 3.6 V Li-SOCI2, ER17505 battery
  • Warning about low battery
  • Battery lifetime up to 16 with standard configuration and operating temperature
• Operating temperature: -30…+85 °C (Recommended: -20…+50 °C)

• Communication: wireless M-BUS
  • Mode: S / T
• Measurement accuracy
  • Temperature: ± 0,3 °C in the range of -10…55 °C
  • Humidity: ± 2 % in the range of 20…80 %
• Transmission interval: 1 / 5 / 10 / 15 min
• AES-128 encryption mode 5 according to OMS V3.0.1
• Supply: 2 replaceable AA cells
• Battery lifetime up to 10 years

• Sensor E2-VOC measures VOC (Volatile organic compounds), ambient temperature and humidity, transmits instant values, average hourly values, and average 24-hour values
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: T (C or S can be custom ordered)
  • AES-128 encryption mode 5, profile A
• Measurement range
  • Temperature: -40…+85 °C
  • Humidity: 0…100 % RH (non condensing)
  • VOC: 0…60000 ppb
• Measurement accuracy
  • Temperature: ± 0,2 °C in the range of +5…+55 °C
  • Humidity: ± 2 % RH in the range of 10…90 %
  • VOC: typical ± (15…25 %) of value at 25 °C / 50 % RH
• Transmission interval: 90 s both sampling and sending. Custom sending interval on request (60 s…1 hr)
• Device has 2 antennas for maximum range in both vertical and horizontal directions
• Power supply: 2 x ER18505 3.6 V Li-SOCI2 battery pack (8200 mAh)
  • Battery lifetime up to 14 years, depends on configuration and operating temperature

Radon gas is tasteless, odorless, and hard to detect, posing serious health risks. It escapes from the ground into the air and can accumulate in your home. Radon is a radioactive element, and higher concentrations entering the lungs can cause cancer. Since its levels can fluctuate regular radon monitoring is vital.

• Radon measurement range: 0…4000 Bq/m3
• Temperature measurement range: 0...+50 °C
• Humidity measurement range: 0...99 %
• Pressure measurement range: 600...1100 hPa
• Operational range (in line-of-sight): up to 3 km*
• Bluetooth Low Energy connection with smartphone (Android or iOS) using Aranet Home mobile app
• Supply: 2 x AA batteries
• Battery lifetime (20 °C): up to 7 years (see datashet)
• E-Ink display for longer battery life
• Operating temperature: 0...+50 °C
• Protection class: IP20

• Sensor AR437 compatible with Wireless data logger AR407
• Temperature measurement range: -30…+80 °C
• Humidity measurement range: 0…100 % RH
• Radio transmission in ISM 868MHz band, range up to 200 m in open space (400 m when retransmission activated requires supplying sensor via the mini-USB port)
• Protection: IP65
• Power supply: battery (3.6 V, AA type)
• Battery lifetime: up to 4 years, at room temperature, with measurement period > 30 min and uninterrupted radio transmission
• Parameter configuration via USB serial interface
• Device variation with external sensor (AR437/2)

Sensor SKU: 5905309600546 (IP67)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud** platform or any other third party systems.

• Moisture measurement range: 0…200 centibar (kPa)
• Temperature measurement range: -55…+125 °C, accuracy: up to 0,5 °C in the range -10…+85 °C and up to 2 °C in the range -55…125 °C
• The temperature sensor is used to adjust the results of soil moisture readings
• Soil moisture and temperature sensors cable length: 3 m
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -35…+70 °C / 0…99 % RH non-condensing
• Case IP67 protection

• Input: external digital I2C probe for temperature, humidity and dew point (sensor are not included)
• Temperature measurement range and accuracy: according to the connected probe
• Humidity measurement range and accuracy: according to the connected probe
• GSM (GPRS) modem, (SIM card are not included)
• Measured values can be sent to the internet storage COMET Cloud
• SMS and JSON messages can be sent via GPRS data connection
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: 1 s...24 h
• Local alarms via LED indication, on LCD screen and acoustically by built-in beeper
• Calibration certificate of manufacturer included
• Data can be transferred to PC via USB-C interface
• Ambient temperature: -20...+60 °C
• Supply: Li-Ion battery A8200, 3.6 V / 5200 mAh
• Protection class: IP67
• Warranty: 3 years

Aranet T/RH jutiklis dideliam našumui yra bevielis jutiklis su išoriniu zondu, sukurtas aplinkoms, kuriose ilgaamžiškumas ir matavimo tikslumas yra būtini.

• Jutiklis suderinamas su Aranet bazinėmis stotelėmis: PRO, PRO Plus ir PRO Plus LTE
• Temperatūros matavimo diapazonas: -40...+85 °C
• Tikslumas: ± 0,3 °C
• Santykinės drėgmės matavimo diapazonas: 0...100 %
• Tikslumas: ± 3 %
• Išorinio jutiklio kabelio ilgis: 1, 5 m
• Veikimo atstumas (tiesioginiu matomumu): iki 3 km
• Siuntimo intervalas: 1, 2, 5, 10 min
• Maitinimas: 1xAA baterija
• Baterijų tarnavimo laikas (20 °C): iki 10 metų
• Siųstuvo darbinė temperatūra: -40...+60 °C
• Siųstuvo apsaugos klasė: IP67

Sensor SKU: 5905309601314 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Temperature measurement range: -40…+125 °C, accuracy up to 0,4 °C in the range from -40°C to +90°C and 0,8 °C in the range +90…+125 °C
• Relative humidity measurement range: 0…100 % RH, accuracy up to 3 % in 0…90 % RH and 4 % in the range 90…99 %
• Default probe length 1 m.
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -35…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327653 (IP30)

Sensor SKU: 5905309600324 (IP67)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Temperature measurement range: -40…+125 °C, accuracy: up to 0,4 °C in -40…+90 °C range and up to 0,8 °C in the +90…+125 °C range
• Relative humidity measurement range: 0…99 % RH, accuracy 3 % in 0…90 % RH
• Default probe length 1 m.
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection (IP67 on request)

Aranet T/RH sensor with Radiation Shield is an innovative solution for accurate temperature and humidity measurements in greenhouses exposed to direct sunlight.

• Sensor compatible with base stations: PRO, PRO Plus ir PRO Plus LTE
• Temperature measurement range: -40...+60 °C
• Accuracy: ± 0.3 °C
• Relative humidity measurement range: 0…100 %
• Accuracy: ± 2 %
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Supply: 1xAA battery
• Battery lifetime (20 °C): up to 10 years
• Transmitter operating temperature: -40…+60 °C
• Transmitter protection class: IP65

Aranet2 HOME is a simple temperature and relative humidity sensor designed to monitor your home environment. Aranet2 PRO, when paired with the Aranet PRO base station, is an excellent choice for monitoring storage facilities or industrial spaces where quick data access and secure data storage (such as cloud storage) are essential.

• Temperature measurement range: 0…+50 °C
• Humidity measurement range: 0...85 %
• Operational range (in line-of-sight): up to 3 km*
• Bluetooth Low Energy connection with smartphone (Android or iOS) using Aranet Home mobile app
• Supply: 2 x AA batteries
• Battery lifetime (20 °C): up to 10 years (see datasheet)
• Measuring intervals: 1, 2, 5, 10 min
• E-Ink display for longer battery life
• Operating temperature: 0...+50 °C
• Protection class: IP20

Sensor SKU: 5905309600102 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Temperature measurement range: -35…+70 °C, accuracy up to 0,4 °C in the range from -10°C to +70°C
• Relative humidity measurement range: 0…99 % RH, accuracy 4 % in 0…80 % RH
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -15…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327622

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Temperature measurement range: -15…+70°C, accuracy: up to 0,4 °C
• Relative humidity measurement range: 0…99 % RH, accuracy 4 % in 0…80 % RH
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection

• Sensor AR436 compatible with Wireless data logger AR407
• Temperature measurement range: -20…+70 °C / with external probe: -30…+80 °C
• Humidity measurement range: 0…100 % RH
• Radio transmission in ISM 868MHz band, range up to 200 m in open space (400 m when retransmission activated requires supplying sensor via the mini-USB port)
• LCD display showing the measured values, messages and errors
• Protection: IP20
• Power supply: battery (3.6 V, AA type)
• Battery lifetime: up to 2 years, at room temperature, with measurement period > 40 min and uninterrupted radio transmission
• Parameter configuration via USB serial interface
• Variation of device without LCD screen (AR435)

Temperature and relative humidity sensor that can be placed in harsh environmental conditions.

• Sensor compatible with base stations: PRO, PRO Plus ir PRO Plus LTE
• Temperature measurement range: -40...+60 °C
• Humidity measurement range: 0...100 %
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Data encryption
• Supply: 1xAA battery
• Battery lifetime (20 °C): up to 10 years
• Operating temperature:
  • -20...+55 °C (Alkaline battery)
  • -40…+60 °C (Lithium battery)
• Protection class: IP67

Power network meter N100 for electric quality to measurements parameters 3 and 4-wire, 3-phase, balanced or unbalanced power network systems with data logging.

The measurement of: values of voltage and current, active, reactive and apparent power, active, reactive energy, power factors, frequency, up to 51st THD.

• Two-color LED display
• Backlit units of all measured quantities
• Configurable analog and alarm outputs
• Digital RS-485 interface, MODBUS
• Archiving data in the internal memory file system memory 8 GB
• Ethernet interface, protocol: MODBUS TCP/IP, HTTP, FTP
• services: www server, ftp server, DHCP client

• Temperature measurement range: 0...+50 °C
• Humidity measurement range: 0...85 %
• Pressure measurement range: 300...1100 hPa
• CO2 concentration measurement range: 0...9999 ppm
• Operational range (in line-of-sight): up to 10 m (Bluetooth Low Energy)
• Data is sent to smartphone (Android, iOS), no need for special receiver
• Data transmission: 1, 2, 5, 10 min
• Aranet4 anti-theft wall mount is available
• Data encryption
• Supply: 2 x AA batteries
• Battery lifetime (20 °C): up to 2 years
• Operating temperature: 0...+50 °C
• Protection class: IP20

• Sensor compatible with base stations: PRO, PRO Plus ir PRO Plus LTE
• Temperature measurement range: -40...+60 °C
• Humidity measurement range: 0...100 %
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Data encryption
• Supply: 2 x AAA batteries
• Battery lifetime (20 °C): up to 7 years
• Operating temperature:
  • -20...+50 °C (Alkaline battery)
  • -40...+60 °C (Lithium battery)
• Protection class: IP42

• Temperature measurement range: 0...+50 °C
• Humidity measurement range: 0...85 %
• Pressure measurement range: 300...1100 hPa
• CO2 concentration measurement range: 0...9999 ppm
• Operational range (in line-of-sight): up to 3 km
• Bluetooth Low Energy operational range for direct connection with smartphone (Android or iOS): up to 10 m
• Data transmission: 1, 2, 5, 10 min
• Aranet4 anti-theft wall mount is available
• Data encryption
• Supply: 2 x AA batteries
• Battery lifetime (20 °C): up to 2 years
• Operating temperature: 0...+50 °C
• Protection class: IP20

• PAR measurement range: 0...4000 μmol/s/m2 PPFD
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Data encryption
• Supply: 1 x AA battery
• Battery lifetime (20 °C): up to 5 years
• Operating temperature: -20...55 °C
• Protection class: IP68

• Supplies and controls NAMUR sensors (1 or 2 channels)
• Relay or transistor output
• Output voltage: 9,2 VDC
• High frequency switching (up to 2 kHz)
• DIN rail-mounted
• LED indication
• Supply: 24 VDC / 230 VAC
• Operating temperature: -20...60 °C
• Protection class: IP20

Level sensor with elimination of rests or foam on the electrode:

• Designed for reliable limit level sensing of wide-range of fluids (electrically conductive or non-conductive), mashed and paste-like materials
• Resistant to adhesion of viscous and sticky media (ketchup, yoghurt, spreads, syrups, creams, pastes, cleaning agents, alkalis, etc.)
• Replacement of vibration level sensors
• Unique function for media recognition “Medium window” (sensor is sensitive only to set medium and does not react to substances with a lower or higher permittivity)
• Direct mounting into tanks, vessels, sumps, pipes or funnels and containers
• Settings by the magic pen (included)

Вы можете использовать его для определения предельного уровня жидкости в непроводящих резервуарах (через непроводящую стенку сосуда или трубопровода).

Датчик оснащен высокочастотной технологией, обеспечивающей надежную работу даже в случае прилипания проводящих сред.

Миниатюрные характеристики в гибком корпусе, возможность установки на слегка изогнутых поверхностях.

Крепится с помощью самоклеящегося слоя или специальных крепежных лент.

Конфигурирование и настройка с помощью «программирующего» кабеля или магнитной ручки.

LED индикация состояния.

• CO2 concentration measurement range: 0...10 000 ppm
• Output: 4...20 mA
• Programmable
• External probe cable length: 1 / 2 / 4 m
• LCD display
• Calibration certificate included
• Ambient temperature: -30...+80 °C
• Supply: 9...30 VDC
• Protection class: IP65
• Warranty: 3 years

Temperature and air humidity transducer P19 with RS-485 output, designed for room humidity ant temperature contro. Can be used in various control and monitoring systems. Output signal is digital (RS-485, MODBUS). Transducer parameters are programmed via PC. Wall-mounted. Can work in condensation-free environment.

• Integrated temperature and humidity sensor
• Calculated values – dew point temperature, absolute humidity
• Minimal and maximal value memory
• Isolated RS-485 port

Relative humidity and temperature transducer P18D with display and RS-485 output, designed for temperature and humidity measurement.

• NDIR gas sensor
• Range: 0...50 000 ppm CO2 (up to 100 % CO2 on request)
• Resolution: 0.01 % vol.
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -25…+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Electrochemical (CO) and optical NDIR (CO2) gas sensors
• Range: 0...100 ppm CO, 0...10000 ppm CO₂
• Resolution: 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Operating temperature: -20...+50 °C
• Supply: 24 VDC/VAC
• Protection class: IP65

• Electrochemical gas sensors
• Range: 0...100 ppm CO, 0...20 ppm NO₂
• Resolution: 1 ppm CO, 0,1 NO₂
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Operating temperature: -20...+50 °C
• Supply: 24 VDC/VAC
• Protection class: IP65

CLM-36 are designed for continuous level measurement of liquids and bulk-solid materials. Mounted directly in containers, tanks, etc. Indicator LDU-410 can be mounted on head. Can be used in high temperature and explosive atmospheres. Current (4...20 mA) or voltage (0...10 V) output.

Digital programmable indicator N20Z for AC voltage, current and frequency measurement.

Programmable parameters:

• LED indicator color, which changes depending on input signal value: green, yellow and red
• Value limits
• Measurement unit indication
• Decimal point location
• Measured signal
• Averaging time
• Individual characteristic
• 2 OC alarms in 6 modes

Digital programmable indicator N24 for temperature, AC/DC voltage and current measurement. Measures J, K, Pt100 temperature sensors signals.

Programmable parameters:

• Value limits
• Decimal point place
• Measurement unit indication
• Cold junction compensation (CJC)
• Compensation for Pt100 sensors
• Averaging time
• Individual characteristic

• Universal input for standard signals and temperature sensors
• 14 mm height 5-symbol LED display
• 24 VDC output supply for other devices
• IP65 front protection class
• Operating temperature: -10...55 °C

Digital, programmable indicator N30H for DC voltage, current, with RS-485 interface.

• Device is designed for DC (bi-polar) voltage, current measurement
• LED indicator colors: red, green, yellow (for 3 input value ranges)
• Device is programmed with buttons or via RS-485 port
• 4 alarm inputs in 6 modes
• Measurement value conversion into analog signal 0/4...20 mA arba 0...10 V
• Minimal and maximal value storing for all measurements

• Digital, programmable pulse, frequency, motor revolutions, work time meter N30O with RS-485 interface
• Programmable with keys or via computer

• Input:
  • temperature:
    • resistance thermometers: Pt100, Pt500, Pt1000
    • thermocouples: J, K, N, E, R, S
  • resistance: 400 ohm, 4000 ohm
  • current: ± 20 mA
  • voltage: 0…10 V, -10…60 mV
• Output: relay (4), analog (1), digital RS-485/MODBUS (1),
• Three-colour display - red, green and orange, programmable in three intervals of the measured value – facilitates the observation of measured value changes.
  • digit height: 14 mm
  • highlighted measuring unit
• Four alarm outputs with signaling on LED diodes operating in six different modes.

• Input (single option): 100 V, 250 V, 400 V, 1 A, 5 A, 20...500 Hz
• Digital output: RS-485 (Modbus RTU)
• Relay outputs: 2x OC
• Display: 3-color LED, 5-digit
• Galvanic isolation
• Supply: 85...253 VAC/VDC / 20...40/60 VAC/VDC
• Protection class: IP65

• Input (single option): 0...100 V, ±100 V, 0...400 V, ±400 V
• Digital output: RS-485 (Modbus RTU)
• Relay outputs: 2x OC
• Display: 3-color LED, 5-digit
• Galvanic isolation
• Supply: 85...253 VAC/VDC / 20...40 VAC/VDC
• Protection class: IP65

• Input (single option): Pt100, J, K, 0...20 mA, 4...20 mA, ±20 mA, 0...75 mV, 0...10 V, ±10 V, 0...150 mV, ±75 mV, V150 mV
• Voltage measurement range: 0...75 mV; 0...150 mV; 0...10 V (DC)
• Current measurement range: 0/4...20 mA; ±20 mA (DC)
• Temperature measurement range: -50...400 °C (Pt100); -50...1200 °C (J) / -50...1370 °C (K)
• Digital output: RS-485 (Modbus RTU)
• Relay outputs: 2x OC
• Auxiliary 24 VDC output to supply transducers
• Display: 3-color LED, 5-digit
• Temperature compensation
• Galvanic isolation
• Supply: 85...253 VAC/VDC / 20...40 VAC/VDC
• Protection class: IP65

• Digital, programmable power network parameter meter N30P with RS-485 interface
• Measures voltage, current, frequency, active, reactive power, cosφ, tgφ, energy consumption
• Programmable with keys or via computer

• Temperature indicator TI-N20, TI-N24 for temperature measurement from -30 to +800 °C
• Various temperature sensor construction types are available

• Temperature indicator TI-N20/5, TI-N24/5 for temperature indication
• Various temperature sensor constructions are available: Pt100, Pt1000; NTC, PTC, termopora K, J

Digital programmable indicator N20 for temperature, DC voltage and current measurement. Measures J, K, Pt100 temperature sensors’ signals.

Programmable parameters:

• LED indicator color, which changes depending on input signal value: green, yellow and red
• Value limits
• Measurement unit indication
• Cold junction compensation (CJC)
• Compensation for Pt100 sensors
• Averaging time
• Individual characteristic
• 2 OC alarms in 6 modes

• For galvanic separation of current signal between explosive (Ex) and normal areas
• Input: 0...20 mA, 4...20 mA
• Output: 0...20 mA, 4...20 mA, version with 0...10 V
• Version with support for HART signal
• DIN rail-mounted
• Supply: 24 VDC / 230 VAC
• Operating temperature: -20...60 °C
• Protection class: IP20

• Universal input (for standard signals and temperature sensors)
• Alarm output
• OLED display
• Configuration via miniUSB connector
• Supply: 24 VDC or 230 VDC / VAC
• IP65 protection class

2, 3 or 4 axes ADR10 series indicators for digital systems, linear displacement measurements, movement measurements, positioning detection. These indicators are used with optical and magnetic linear encoder scales ALS or MLS. Error compensation.

Application:

• Lathes
• Milling machines
• Plate metal processing mills
• Grinding machines
• Erosion machines
• Mechanical processing centers

• Temperature measurement range: -20...+60 °C
• Humidity measurement range: 0...100 %RH
• Pressure measurement range: 600...1100 hPa
• CO2 concentration measurement range: 0...5000 ppm
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: 1 s...24 h
• Internal sensors
• Local alarms via LED indication, on LCD screen and acoustically by built-in beeper
• Data can be transferred to PC via USB-C interface
• Calibration certificate included
• Ambient temperature: -20...+60 °C
• Supply: 5200 mAh LiIon battery
• Protection class: IP20
• Warranty: 3 years

• Universal datalogger with 4 hardware MiniDIN inputs for connecting temperature and humidity probes.
• Multilogger can be installed permanently to Ethernet network or work as a portable device.
• Measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.
• Calibration certificate included.
• 3 rechargeable AA batteries with a power adapter, wall holder and USB cable are included in the delivery.
• Temperature (Pt1000) and humidity probes are ordered separately. Cable length – 1, 2, 5, 10, 15 meters.
• Open collector transistor alarm output.

• Universal datalogger with 4 hardware MiniDIN inputs, 2 for thermocouples K, J, S, B, T, N and 2 for connecting temperature and humidity probes.
• Cold junction compensation (CJC).
• Sensors of physical quantities with bipolar voltage output can also be connected. Two voltage ranges: -18...+18 mV and -60...+140 mV.
• Multilogger can be installed permanently to Ethernet network or work as a portable device.
• Measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.
• Calibration certificate included.
• 3 rechargeable AA batteries with a power adapter, wall holder and USB cable are included in the delivery.
• Temperature (Pt1000) and humidity probes are ordered separately. Cable length – 1, 2, 5, 10, 15 meters.
• Open collector transistor alarm output.