Поиск

• Universal air and environment quality sensor E2-CO2-series measures CO₂ (carbon dioxide) level, temperature, humidity, pressure, sound level, ambient light (LUX). Transmits instant values, average hourly values, and average 24-hour values
• Communication: wM-BUS EN13757-3/4:2013, complies OMS 4.0.2
  • Modes: C1-A/B, T1 or S1 (selectable on order)
• Measurement ranges
  • Temperature: -40…85 °C
  • Humidity: 0…100 % RH (non-condensing)
  • CO2: 0…5000 ppm (0…55 °C)
  • LUX: 0,01…83000 LUX at same frequency as the human eye
  • Absolute pressure: 20…100 kPa
  • Sound level: 53…90 dBa at 850 Hz
• Measurement accuracy
  • Temperature: ± 0,2 at +5…+60 °C; ± 0,5 at -20…+85 °C
  • Humidity: ± 2 % RH at 20…80 % RH; ± 3 % RH at 10…90 % RH; ± 3,5 % RH at 0…100 % RH
  • CO2: ± (50 ppm + 3%)
  • LUX: 4 %
  • Pressure:  0,4 kPa
• CO2 sensor calibrates every 20 days
• Warnings about low battery, CO₂ sensor malfunction, calibration not performed yet
• Transmission interval: every 90 seconds
• Measured values sample interval: every 6 minutes
• LED and sound indication about CO₂ exceeded limit
• Device has 2 antennas for maximum range in both vertical and horizontal directions
• Power supply: 2 x ER18505 3.6 V Li-SOCI2 battery pack (8200 mAh)
  • Up to 14 years battery lifetime, standard configuration and operating temperature

TSM400-1-CP is a multi-parameters sensor that supports the 1-Wire protocol. The sensor measures the concentration of carbon dioxide and atmospheric pressure.

• CO2 measurements range: 400…5000 ppm
  • Accuracy: ± (40 ppm + 5 %)
  • Resolution: 1 ppm
  • Calibration: manual
• Pressure measurements range: 10…1200 hPa
  • Accuracy (min): ±1.5 (25°C, 750 hPa)
  • Accuracy (max): ±2.5 (-20 °C to + 85 °C, 300…1100 hPa)
  • Resolution: 1 hPa
• Operating temperature range: -20…+60°C
• Operating relative humidity range: 5…95% (non-condensing)
• Ingress protection: IP20
• Operating voltage range: 4,5…26 VDC

• Input: 2x thermocouples - J, K, T, N, E, B, R, and S
• Output: Modbus RTU – RS-485
• Resolution: 24 bits with DSP processing
• Working isolation voltage: 1500 Vrms
• Operating temperature / humidity: -20…+60 °C / 10…90% (non-condensing)
• DIN rail mounting
• Power supply: 5…30 Vdc
• Warranty: 3 years

TCG210-4 is a battery-powered 4G parcel temperature and humidity logger with fallback support for 2G communication. The device is compatible with HTTP/HTTPS API protocols, making it suitable for modern IoT applications. It periodically sends HTTP/HTTPS POST requests to a remote server, containing a status file in JSON format and the most recent logged data in CSV format.

• Global connectivity - Quad-band 4G LTE Cat.1 with 2G fallback ensures reliable operation worldwide.
• Battery-powered autonomy - Operates for months without external power, ideal for parcel monitoring and remote applications.
• Intelligent power management - Advanced sleep mode significantly extends battery life.
• Flexible configuration - Easy setup via Wi-Fi, SMS, or HTTP API.
• Real-time alerts - Instant SMS alarm notifications to up to five phone numbers.
• Integrated sensing - High-accuracy temperature and humidity sensor for critical parcel monitoring.
• Large data storage - Onboard memory for up to 70,000 logged records.
• Seamless IoT integration - Periodic HTTP/HTTPS POST with current status in JSON format.
• Data export - Automatic upload of logged data in CSV format to a remote server.
• Remote management - Full device control through HTTP API commands.
• Future-proof - Firmware update over Wi-Fi or 4G LTE keeps the device always up to date.
• Compact and lightweight - Designed for easy deployment in parcel logistics, cold chain transport, and warehousing.
• Safe for air transport - Powered by a compliant Li-SOCl₂ battery (IATA DGR, UN 3091, PI970 Section II), suitable for air shipment.

• Input voltage range: 0…264 Vac or 0…370 Vdc
• Input frequency: 0…60 Hz
• Input resistance: >2.4 MOhm
• Output: Modbus RTU – RS-485
• Resolution: 24 bits with DSP processing
• True RMS measurement
• Working isolation voltage: 1500 Vrms
• Operating temperature / humidity: -20…+60 °C / 10…90% (non-condensing)
• DIN rail mounting
• Power supply: 5…28 Vdc
• Warranty: 3 years

Precise AC/DC current, voltage and resistance calibrator Inmel 7000.

The SV600 Fixed Acoustic Imager enables users to continuously detect, locate and visualize unheard and unseen air and gas leaks or changes in sound signatures before they become costly problems.

• 64 MEMS digital microphones for image of leaks
• Powerful processor for onboard real time processing: Sound classification, Frequency filtering, dB values and sound intensity mapping, Event triggering
• Measuring distance: 3…15 m
• Integrated visual light camera
• The SV600 can be mounted on moving applications – including as a Boston Dynamics Spot
• Can be mounted close to any equipment or asset, to any area of the production line, or where human access is restricted or dangerous
• Option for IO support through fieldbus coupler
• Integration: HTTP REST API, Modbus
• Operating temperature: -20…+50 °C
• Protection class: IP54
• Communication and power supply: Ethernet RJ45, POE IEEE 802.3at

Ambient humidity and temperature logger TERMIOPLUS-S with external sensor is designed for logging of ambient humidity and temperature in its internal memory.

• Temperature range: -30...+70°C
  • Temperature accuracy: In range -30...+70 °C: ± 0,3 °C
  • Resolution: 0.1
• Humidity range: 0...100 % RH
  • Humidity accuracy: ±2 %RH at 25 °C (30…70 %RH); ±3 %RH at 25 °C (10…90 %RH); ±4 %RH at 25 °C (0…100 %RH)
• Memory: 32000 (16000 temperature and 16000 humidity)
• USB interface for data download
• Logging interval: 15 s...10000 min
• Supply: 2xAA battery, 3.6 V
• Battery lifetime: 1 one year with 30 min. interval recording at +10 °C
• Size: 45 x 100 x 19 mm

• Analog gas detector MC for connection to DGC, MSC, WSB or any compatible gas detector
• Reliable self-monitoring: Integrated watchdog
• Precise signal: 4–20 mA (2–10 V) output for easy system integration

The ATEX IBC Heater series is a safe, efficient, and customizable heating solution for IBC containers located in hazardous areas. IBC heaters are used for protection against frost, temperature maintenance and process heating in a wide range of industries.

Technical Specifications:

• Heats IBCs from -40°C to +200°C for steel, +80°C for plastic, ideal for industries like oil, gas, and pharmaceuticals.
• Fits standard 1000-liter IBCs, optional insulating lid, for indoor/outdoor use, IP65/I dust and water jet protection.
• Ready to use, fully configured with EC-type certificate, no additional acceptance needed.
• Variable voltage, power, and size options, for temperature classes T6 to T3.
• Compatible with optional ATEX controller for temperature management.
• Nominal voltage: 230 VAC*
• Nominal power: 2400 W (container heater) (insulation lid) without heating
• Max. operating temperature: +180°C / +200°C (steel IBC-Container), +80°C (plastic IBC-Container)
• Temperature class: T6, T5, T4, T3 (depending on temperature setting limiter)
• Electrical connection terminal boxes for network (EX-e) / sensor (EX-i)
• Protection class: IP65/I
• Zones 1/2 (gas); 21/22 (dust)
• Sensors: 2xPt100 (EX-i, EX-e)
• Weight: 30kg (container heater), 5kg (insulation lid)

The ATEX LB Series Drum Heater is engineered for safe and efficient heating in explosion-proof environments. Designed for drums in Zones 1, 2, 21, and 22, it delivers reliable performance with self-limiting heating technology. Ideal for maintaining low-temperature processes and frost protection, it features robust, anti-static PVC fabric and a user-friendly ATEX-certified junction box. Perfect for industries handling volatile chemicals or requiring stringent safety standards.

Technical Specifications

• Certification: CETS 23 ATEX 030 X; CETS 23 ATEX 031 U
• Zones: Suitable for Zones 1, 2, 21, and 22
• T-Class: T6, T5, T4, T3, T2, T1
• IP Rating: IP65 for dust and water resistance
• Operating Temperature: 65°C (energized) / 85°C (de-energized)
• Ambient Temperature: -20°C to +55°C
• Power Output: Self-limiting heating cable, adjustable to drum size
• Materials: Anti-static, water-repellent PVC fabric (B2 Flame Retardant)
• Connection Cable: 5m, 3G1.5mm² with ATEX-certified junction box
• Available Sizes: For 200/220L drums
• Applications: Frost protection, temperature maintenance, chemical processing

Solid drilled threaded thermowells, protective cases:

• Protect and extend the lifetime of temperature sensors and thermometers in processing applications
• Facilitate the replacement of sensors
• Allow sensor maintenance without process interruption

• Measures ambient air pressure
• Measurement range: 600...1100 hPa
• Operating temperature: -30...80 °C
• Output: Ethernet
• Optional connection to WiFi network via tiny wireless router TL-WIFI
• Webserver
• Measurement interval: 2 s
• Alarm protocols: E-mail, SNMP Trap, Syslog
• Supply: 9...30 VDC
• Protection class: IP30
• Calibration certificate included

• Module is designed to protect battery if it discharges below 10,5 V mark, disconnecting it from load
• Battery is automatically reconnected to load if its voltage rises
• Suitable for work with heaters, lighting, travel refrigerators, etc.
• Operating voltage: 12 V ZBxx, 24 V ZBxx-24V, 48 V ZB-48V
• Maximal current: 40 A ZB40, 80 A ZB80, 140 A ZB140
• Operating temperature: -20...50 °C
• Dimensions: 65 x 89 x 70 mm

The BDX-30 and BDX-20 is the newest in the legendary “BD Series” pin meters for the building trades. This rugged meter has an ergonomic design with an easy grip handle and large tactile buttons for comfort and usability. Equipped with a custom, LCD display and intuitive user interface, users can quickly obtain accurate readings.

• Large, custom display with auto backlight - easy to read under all conditions
• On-screen statistics for up to 100 readings saved to the meter
  • High, Low, Average, Standard Deviation
• Measuring Range:
  • Wood (Douglas Fir) 6%-60%
  • Drywall 0.1%-6%
  • Reference 1-100
• Wood temperature correction (°F / °C)
• Select from 37 wood species and materials
• Bluetooth® connectivity to EDGE® app (BDX-30)
  • Timestamp and geotag, Data export to .csv format, Save unlimited readings
• Color-coded LED’s – adjustable through EDGE® app (BDX-30)
• Alarm set point - alerts to user-selected MC level
• Internal calibration check
• "Low Batt" warning with audio
• Auto off timer. Set to 1m, 4m or 10m
• Compatible with all Delmhorst electrodes
• Power: 2x AA Alkaline batteries
• Temperature Correction Range: 0…255 °F (-18…+124°C)

• Voltage range: 0,2...1000 V
• Current range: 20 mA...20 A
• Frequency range: 40...5000 Hz
• DC voltage and currency accuracy: 0,02 %
• AC voltage and currency accuracy: 0,05 %
• Load capacity up to 40 VA
• USB, RS232 interfaces
• Ambient temperature: 23 °C ±5 °C

Portable calibrator for DC voltage and current.

Purpose:

• Calibration and verification of temperature measurement equipment
• Measurement and control equipment monitoring
• Current loop circuit monitoring

Portable calibrator for tuning of thermoelectrical sensors.

Purpose:

• Calibration and verification of temperature measurement equipment
• Calibration and verification of transducers
• Tuning of measurement and control systems

Portable calibrator for RTD sensors.

Purpose:

• Calibration and verification of temperature measurement equipment
• Measurement and transducer calibration and verification
• Control system tuning

Universal calibrator-meter Inmel 60 for automation tuning.

Inmel 8031/8033 AC, power and energy calibrator.

• SET-1000 + SET/OSK2 is designed for oil detection on water surface
• Can be used in tanks where water level is alternating
• Control device SET-1000 is a one-channel level switch
• SET/OSK2 sensor detects more than 15 mm width hydrocarbon layer on water surface
• Polypropylene floats
• ATEX certified
• Wall-mounted, IP67
• Supply: 230 VAC, 50/60 Hz

• Stable long-life optical NDIR gas sensor
  Range 0...10 000/50 000 ppm CO2
  Resolution 1/100 ppm for 10K/50K range CO2​
  Outputs 2 relays, 2 x 4...20 mA / 0...10 V, RS-485
  Remote probe option

• Stable long-life optical NDIR gas sensor
• Range 400...5 000/10 000/50 000 ppm CO₂
• Resolution 10 ppm CO₂
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Remote probe option

• NDIR gas sensor
• Range: 0...10 000 ppm CO2
• Resolution: 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: 0...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC as options

• Stable long-life electrochemical gas sensor
• Range 0....1000 ppm CO
• Resolution 1 ppm CO
• Default alarms at 25 ppm / 35 ppm CO
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485

• Stable long-life electrochemical gas sensor
• Range: standard 0....200 ppm CO, maximal 0...1000 ppm CO
• Resolution 1 ppm CO
• Default alarms at 25 ppm / 125 ppm CO
• Outputs 2 x relays with switch-over contacts
• Visual and acoustic alarms

• Long-life electrochemical cell
• Range 0....1000 ppm CO
• Resolution 1 ppm CO
• Outputs 4...20 mA / 0...10 V, RS-485

• Stable long-life electrochemical gas sensor
• Range 0....200 ppm CO
• Resolution 1 ppm CO
• Outputs 2 x relays with switch-over contacts
• UART digital interface
• Visual and acoustic alarms
• Magnetic key switching

• Electrochemical gas sensor
• Range:
• -- 0…300 ppm CO
• -- 0...1000 ppm CO
• Resolution: 1 ppm CO
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -20...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Addressable digital gas detection system (Sensor-Board SB) for combustible, toxic and refrigerant gases.
• Communication: RS-485 interface for stable and secure system networking
• Precise Detection: High accuracy thanks to digital signal processing
• Easy maintenance with X-Change: Plug & Play systems for fast, convenient service
• Robust Design: Reliable with IP65 even under extreme conditions

• Lokaset 20 is designed for high wastewater level detection in septic tanks
• Easy to install, does not need calibration
• Switch output
• Visual and acoustic alarms
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

• CO2 concentration measurement range: 0...10 000 / 50 000 ppm
• External sensor cable length 1 / 2 / 4 m
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: 10 s...24 h
• Calibration certificate included
• LED, acoustic alarms
• LCD screen
• Data can be transferred to PC via USB-C interface
• Operating temperature: -20...+60 °C
• Supply: battery
• Protection class: IP54
• Warranty: 3 years

• Measures carbon dioxide concentration in air
• Measurement range: 0...2000 ppm
• Operating temperature: -30...60 °C
• Output: Ethernet
• Optional connection to WiFi network via tiny wireless router TL-WIFI
• Webserver
• Measurement interval: 15 s
• Alarm protocols: E-mail, SNMP Trap, Syslog
• Supply: 9...30 VDC
• Protection class: IP30
• Calibration certificate included

• Measures carbon dioxide concentration in air
• Measurement range: 0...10000 ppm
• Operating temperature: -30...80 °C
• Cable length: 1 / 2 / 5 / 10 m
• Output: Ethernet
• Optional connection to WiFi network via tiny wireless router TL-WIFI
• Webserver
• Measurement interval: 15 s
• Alarm protocols: E-mail, SNMP Trap, Syslog
• Supply: 9...30 VDC
• Protection class: IP30
• Calibration certificate included

• Measures carbon dioxide concentration in air
• Duct mount
• Measurement range: 0...2000 ppm
• Operating temperature: -30...60 °C
• Output: Ethernet
• Optional connection to WiFi network via tiny wireless router TL-WIFI
• Webserver
• Measurement interval: 15 s
• Alarm protocols: E-mail, SNMP Trap, Syslog
• Supply: 9...30 VDC
• Protection class: IP30
• Calibration certificate included

• Measures carbon dioxide concentration in air, temperature, humidity
• Calculates dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
• Measurement ranges: 0...2000 ppm, -30...+80 °C, 5...95 %RH
• Output: Ethernet
• Optional connection to WiFi network via tiny wireless router TL-WIFI
• Webserver
• Measurement interval: 2 s; CO2: 15 s
• Alarm protocols: E-mail, SNMP Trap, Syslog
• Supply: 9...30 VDC
• Protection class: IP30
• Calibration certificate included

• Measures carbon dioxide concentration in air, temperature, humidity
• Calculates dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
• Measurement ranges: 0...10000 ppm, -30...+105 °C, 5...95 %RH
• Temperature and humidity sensor cable length: 1 / 2 / 4 m
• Carbon dioxide concentration sensor cable length: 1  2 / 5 / 10 m
• Output: Ethernet
• Optional connection to WiFi network via tiny wireless router TL-WIFI
• Webserver
• Measurement interval: 2 s; CO2: 15 s
• Alarm protocols: E-mail, SNMP Trap, Syslog
• Supply: 9...30 VDC
• Protection class: IP30
• Calibration certificate included

• For methane, butane, propane and hydrogen
• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL
• Resolution 0,1 % LEL
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarms at 20 / 50 % LEL

• For methane, butane, propane and hydrogen
• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL
• Resolution 0,1 % LEL
• Outputs 2 x 4...20 mA / 0...10 V, RS-485

• For methane, LPG, hydrogen and acetylene
• Can be calibrated for methane, butane, propane, acetylene and hydrogen
• Stable long-life metal-oxide gas sensor
• Range: 0...100 % LEL
• Resolution: 0,1 % LEL
• Outputs 2 x relays with switch-over contacts
• Default alarms set-points 10 / 25 % LEL
• UART digital interface
• Alarms: blinking LED, 85 dB buzzer

• Metal-oxide gas sensor
• Detected gases: hydrogen, methane, acetylene, propane, butane
• Standard calibration: methane
• Range: 0...100 % LEL
• Resolution: 0,1 % LEL
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+70 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Applications of flue gas analyzer Si-Ca 130: boilers, burners, water heaters and furnaces
• Detectable gases: O₂, CO, CO(H₂), CO₂, NO, Low NO, NOx, Low NOx
• Up to three gas sensors
• CO measurement up to 8000 ppm
• Other measurement parameters: flue temp., air temp., differential temp., pressure / draft, excess air, combustion efficiency, combustion efficiency (condensation), stack gas velocity
• Color graphical touchscreen for control
• Communication: USB, Bluetooth (mobile App), remote printer
• Measurement storage: 2000 data points + smartphone and PC
• Predictive maintenance with estimated sensor life and calibration reminders
• Protection class: IP42
• Power supply: Rechargeable battery, Li-Ion 5100 mA/h 3.6 V (8 hours working time)
• Operating temperature: -5…+45 °C
• Sensor protection by pump stopping

• Warning- and Sensor-Board WSB for digital and analog sensor technology for the precise detection of combustible, toxic and refrigerant gases.
• Versatile alarm function: Alarm and fault relays (30 V)
• Intelligent interfaces: RS-485 interface with DGC or Modbus protocol
• Precise signal transmission: 4–20 mA input and output for reliable communication
• Flexible: Connection of up to 3 sensors (2 digital)

Compact sensor VA 525 for measuring compressed air or nitrogen inline.

• 4...20 mA and pulse or a Modbus RTU (RS 485) interface as standard
• Optional interfaces such as Modbus TCP (Ethernet), PoE, M-Bus available
• Pressure range up to 16 bar
• Temperature range up to 60°C
• For speeds up to 224 Nm/s
• Integrated display to show the measured values
• Available from 1/4" to 2''
• Settings adjustable via the keys of the display
• Main counter can be reset via the display
•  

The ATEX Gas Bottle Heater series is a safe, efficient, and customizable heating solution for gas bottles located in hazardous areas.

• Nominal voltage: 230 VAC*
• Nominal power: 380W, 850W, 850W (10L, 50L, 79L) or application-specific
• Max. operating temperature: +50/60°C (jacket max. 200°C)
• Temperature class: T6, T5, T4, T3 (depending on temperature setting limiter)
• Electrical connection terminal boxes for network (EX-e) / sensor (EX-i)
• Protection class: IP65/I
• Zones 1/2 (gas); 21/22 (dust)
• Sensors: 2xPt100 (EX-i, EX-e)
• Weight: 6kg, 9.5kg, 10kg (10L, 50L, 79L)

Utilizing unique dual-sensing technology, the device combines electromagnetic induction with an integrated ultrasonic sensor to provide highly accurate detection of both liquid level and flow velocity. Specifically optimized for partially filled pipes, open channels, and gravity-fed systems, the unit achieves an outstanding accuracy of ±1–2% of the actual flow rate.

• Internal pipe diameter: DN80…DN600
• Flow velocity (min. / max.): 0,46…7,5 m/s
• Accuracy: ± 1…2 % of actual flow (depends on flow profile and level detection)
• Process Temperature: 0…+70 °C
• Coating materials: hard rubber
• Maximum working pressure: No pressure (gravity flow) or 10 bar if pipe is full
• Output signal: 2× pulse / flow switch (max. 400 Hz), 4 ... 20 mA, 1× RS485 interface (Modbus / M-Bus protocol), M-Bus, HART, Ethernet module (TCP/IP, integrated web server)
• An optional IoT module allows measured values to be transmitted wirelessly via NB-IoT to the cloud
• Data archiving on a micro-SD card
• Process connections: flange
• Maximum ambient temperature: 55 °C
• Power supply: 24 V AC / DC, 230 V AC
• Protection class: IP68 for sensor, IP65-IP68 for transmitter

FLOW 38 MID version with certification, allowing the flow meter to be used for utility metering. FLOW 38 MID is certified for use with drinking water. The FLOW 38 MID electromagnetic flow rate meter is a precise measuring device designed to measure the flow of electrically conductive liquids.  The electronic unit (display) can be connected directly to the body (rotatable up to 350° for convenient viewing). Various process connection versions are available. A wide selection of materials for the internal surfaces in contact with the process medium allows the device to be adapted to various liquids.

• Internal pipe diameter: DN10…DN400
• Flow velocity (min./max.): 0,1…12 m/s (R40, R50)
• Accuracy: 0.2% in the 1:100 range, 0.5% in the 1:200 range
• Maximum medium temperature depending on the inner coating: 150 ℃
• Coating materials: rubber, teflon, ceramic
• Maximum working pressure: up to 16 bar
• Output signal: pulse, 4-20 mA, RS485 (Modbus RTU/ M-bus)
• An optional IoT module allows measured values to be transmitted wirelessly via NB-IoT to the cloud
• Process connections: Flange, Thread
• Maximum ambient temperature: 50 °C
• Power supply: 24 VAC/VDC, 110... 230 VAC
• Protection class: IP65, IP67, IP68