Lumel

• Связь сети RS-485 с компьютером через USB порт.
• Максимальная скорость связи 1 Mb /s (зависит от длины линии RS-485).
• Гальваническое разделение портов входа и выхода.

• Преобразователь типа P20H предназначен для преобразования сигнала высокого напряжения или тока с однополярных или двуролярных в стандартные сигналы постоянного тока и напряжения или в цыфровой формат МODBUS.
• Вход гальванически отделен от выхода и источника питания.
• Программирование прибора выполняется с помощью программатора PD14 и бесплатной программой LPConfig, с помощью которой можно конфигурировать, контролировать сигналы, изменять настройки преобразователя.

Пассивный сепаратор сигналов, стандартного 0/4…20мA тока, питаемый от токовой петли.

• Устройство предназначено для преобразования сопротивления, стандартного напряжения и тока термодатчика на сигналы постоянного напряжения и тока
• Ввод гальванически изолирован от выхода и питания
• С помощью программатором PD14 можно запрограммировать тип выхода, период усреднения, настроить индивидуальную характеристику выхода и измеряемый сигнал

• Прибор предназначен для преобразования и галванического разделения стандартных сигналов постоянного тока и напряжения и установления индивидуальной характерисики выходного сигнала.
• Вход гальванически изолирован от выхода и источника питания.
• Программирование прибора выполняется с помощью программатора PD14 и бесплатной программой LPConfig.

• T22CT can be used for network analysis, monitoring and measuring of non -sinusoidal and distorted networks AC current
• Variations of measuring current range (A): 0...50 / 100 / 150 / 200 / 250 / 300 / 400 / 500 / 600 / 750
• Output: 4…20 mA or 0…20 mA (Proportional change to input current)
• Frequency range of Measuring current: 50…60 Hz
• High electric isolation between primary conductor and output
• Mounting onto 35 mm DIN rail by means of optional supply of snap on mounting
• Auxiliary power supply: 24 V DC, ± 15%
• Protection class: IP20
• Operating temperature and Humidity: 0…+70 °C, 0...95% RH without condensation

• Temperature measurement range: -30...+80 °C
• Humidity measurement range: 0...100 %
• Output: RS-485 Modbus RTU
• Calculates absolute humidity and dew-point temperature
• Cable length: 2 m / 2 m with M8 connector / 5 m / 10 m
• Operating temperature: -20...+60 °C
• Supply: 9...28 VAC/VDC

The mini-size multimeter has multiple functions, such as auto range, auto scan (SMART) and true RMS functions, which makes it more convenient and intelligent. Besides normal multimeter function, it also has the function of NCV test and LIVE wire test, which is convenient for field testing. Blacklight and Flashlight capabilities facilitate use in dark work environment.

• CAT III 600V
• TRMS
• AC/DC Voltage measurement: 400 mV…400 V
• AC/DC Current measurement 40 mA … 10 A
• Resistance measurement 400 mΩ … 40 MΩ
• Capacitance measurement 4 nF…4 mF
• Frequency measurement
• Temperature measurement -200…1200 °C
• Auto Scan function (SMART)
• HOLD function, Continuity test and Diode test
• Dimensions: 130 x 62 x 27 mm

The VA702 is a Volt/mA/TC Calibrator, designed as a source and measurement tool. It measures or outputs a 0 to 24 mA DC current loop, 0 to 20 V DC voltage, and supports thermocouple temperature measurements (model dependent). Note: The calibrator cannot measure and source simultaneously.

• Maximum voltage: 30V (between any jack and earth ground or between any two jacks)
• Storage temperature: -40℃ to 60℃
• Operating temperature: -10℃ to 50℃
• Operating altitude: Up to 2000 meters
• Temperature coefficient: ±0.01% of range per ℃ (for temperatures -10℃ to 18℃ and 28℃ to 55℃)
• Relative humidity:
  • 95% up to 30℃
  • 75% up to 40℃
  • 45% up to 50℃
  • 35% up to 55℃
• Power requirements: 6 x AAA batteries
• Size: 204mm (L) x 99mm (W) x 46mm (H)
• Weight: 460g (including battery)

The VA700 Loop Calibrator is a versatile source and measurement tool. It is designed to measure or output a 0 to 24 mA DC current loop and 0 to 20 V DC voltage. The calibrator cannot measure and source simultaneously.

• Maximum voltage: 30V (between any jack and earth ground or between any two jacks)
• Storage temperature: -40℃ to 60℃
• Operating temperature: -10℃ to 55℃
• Operating altitude: Up to 3000 meters
• Temperature coefficient: ±0.005% of range per ℃ (for temperatures -10℃ to 18℃ and 28℃ to 55℃)
• Relative humidity:
  • 95% up to 30℃
  • 75% up to 40℃
  • 45% up to 50℃
  • 35% up to 55℃
• Shock: Random 2g, 5Hz to 500Hz
• Safety: 1 meter drop test
• Power requirements: 6 x AAA batteries
• Size: 204mm (L) x 99mm (W) x 46mm (H)
• Weight: 460g (including battery)

The VA710 Thermocouple Calibrator is a high-accuracy handheld instrument for calibrating thermocouple instruments. It measures or simulates 8 types of thermocouples (°C or °F) and millivolts. It cannot measure and source simultaneously.

• Measure or simulate: Millivolt and 8 types of thermocouples (°C or °F)
• Display: Large 5-digit LCD with full-angle visibility
• Accuracy: Max. up to 0.3℃ and 0.025% for mV
• Maximum voltage: 30V (between any jack and earth ground or between any two jacks)
• Temperature coefficient: ±0.02%/℃ (from 0℃ to 18℃ and 28℃ to 50℃)
• Storage temperature: -40℃ to 60℃
• Operating temperature: 0℃ to 50℃
• Operating altitude: Up to 3000 meters
• Relative humidity:
  • 95% up to 30℃
  • 75% up to 40℃
  • 45% up to 50℃
• Shock: Random 2g, 5Hz to 500Hz
• Safety: 1 meter drop test
• Fuse: F 0.125A/250V
• Power supply: 6 x AAA 1.5V batteries or Standard jack for external power supply
• Size: 205mm (L) x 98mm (W) x 46mm (H)
• Weight: 472g (including battery)

• The MQTT protocol is ideal for communication in distributed acquisition systems data (IoT applications)
• Especially suitable for server rooms, pharmaceutical and food warehouses, laboratories, museums and greenhouses
• Logged data is stored in the internal memory and then sent digitally to the user (over Ethernet)
• Alarms are formed by e-mails, on the webserver, using symbols on screen or via audible alarms
• HT20IoT can be powered by the Ethernet network (PoE – Power over Ethernet), additionally ordered
• FTP, DHCP, SMT, Modbus TCP/IP protocols

• Measurement of 85 power network parameters, including current and voltage harmonics up to 31st in 1-phase 2-wire or 3-phase 3 or 4-wire.
• Accuracy of active energy measurement 0.5S or 0.2S
• RS-485 (Modbus RTU) interface for remote monitoring of measured parameters
• The dual-tariff function for energy billing applications
• 2 relay outputs
• Pulse output: SO output as pulse or alarm
• 2 digital inputs as energy consumption, pulse counting and contact status
• Measured values displayed in 10 configurable screens
• Possibility programming of current and voltage ratio without restrictions as in MID-certified products
• Measurement inputs dedicated for x/1A and x/5A current transformers
• Power supply: 100…550 V a.c. / d.c.
• DIN rail mounted

Recorder HT20 is designed for measurement and logging of ambient humidity and temperature.

• Especially suitable for server rooms, pharmaceutical and food warehouses, laboratories, museums and greenhouses
• Logged data is stored in the internal memory and then sent digitally to the user (over Ethernet)
• Alarms are formed by e-mails, on the webserver, using symbols on screen or via audible alarms
• HT20 can be powered by the Ethernet network (PoE – Power over Ethernet), additionally ordered
• FTP, DHCP, SMT, Modbus TCP/IP protocols

• Universal input for measuring temperature, resistance and standard signal
• 4 alarm outputs with signaling on LED diodes
• Digital output: RS-485 modbus (can be programmed through RS-485)
• Analog signal output: 0/4...20 mA or 0...10 V
• Two-line LCD display
• Mathematical functions for converting the measured value
• Protection grade: frontal side – IP65 / from terminal side – IP10
• Operating temperature: -25...23...55 °C

• Measurement of parameters: voltage, current, active, reactive and apparent power, cosφ, tgφ, frequency, active, reactive and apparent energy, active power 15 minutes, voltage 10 minutes
• Current and voltage harmonics analysis up to 51st (measurements available via RS-485)
• Programmable input:
  • Current: 0…1 / 0…5A
  • Voltage: 0…100V / 0…230V / 0…400V
• Output:
  • Analog: 0/4...20 mA or 0...10 V
  • Relays: 1 or 4
  • Binary (OC)
• Digital output: RS-485 modbus (can be programmed through RS-485)
• Two-line LCD display
• Pulse output to measure energy consumption
• 4 alarm outputs with signaling on LED diodes, working in 7 different modes
• Conversion of any measured value into an analog signal 0/4...20 mA or 0...10V
• Protection grade: frontal side – IP65 / from terminal side – IP10
• Operating temperature: -25...23...55 °C

• Voltage measurement ± 600 V, current measurement via shunt, power, energy and capacity measurement of d.c. circuits
• 4 alarm outputs with signaling on led diodes, working in 7 different modes
• Analog outputs: 0/4...20 mA or 0...10 V
• Digital output: RS-485 / MODBUS RTU
• Two-line LCD display
• Protection grade: frontal side – IP65 / from terminal side – IP10
• Operating temperature: -25...23...55 °C

N19Z meter measures AC voltage and current. The meter is designed to work in 3-phase networks or 1-phase networks.

• Nominal input voltage: 300 or 600 V 1 phase / 100…500 V 3 phase
• Nominal input current: 1A or 5A
• True RMS measurement (up to 15th Harmonic)
• On site programmable PT/CT ratios
• User selectable 3ph3wire or 3ph4wire Network (for 3ph)
• Onsite selection of Auto scroll / Fixed Screen (for 3ph)
• 4 Digits 14mm ultra bright LED Display
• Protection: IP54 front / IP20 back
• Parameter Screen recall: In case of power failure, the instrument memorizes the last displayed screen
• Accuracy: ±0.5% of nominal value

• Įėjimas: Pt100, Pt1000, 0…4000 Ω, TC (E, J, K, N, R, S), -75…310 mV, -10…10 V, -24…24 mA, potenciometras
• Relinė išėjimas: 1 x NO kontaktas, apkrovos galia 6 A / 250 V AC; 6 A / 30 V DC
• Skaitmeninis išėjimas: RS-485 / MODBUS RTU
• Išorinio įrenginio maitinimas: 24 V DC / 24 mA
• Matematinės funkcijos matavimo reikšmės konvertavimui
• Dviejų eilučių LCD ekranas (1 eilutė – 6 skaitmenys, 2 eilutė – 5 skaitmenys)
• Apsaugos klasė: priekio – IP65 / galo – IP10
• Darbinė temperatūra: -20...23...60 °C
• Maitinimas: 40…253 V AC / 20…300 V DC

• 10 time functions. With control signal and without additional signal
• 10 time ranges. Ranging from 0,1 sec. to 30 hours
• Operating voltage: 12…240 V AC / DC
• Operating power: < 4 VA
• Mounting on DIN rail
• Operating temperature: -20…+55 °C

• Maximum efficiency up to 98,5 % (SiC technology)
• Wide MPPT voltage range: 350...800 V
• Maximum power point tracking, up to 3 MPPT trackers
• Large graphical display provides an easy, user friendly operator interface
• Versions without transformer for enhanced efficiency
• Inputs/outputs: 3 x analog inputs, 2 x digital inputs, 2 x digital outputs
• 2 x RS-485 ports
• Auxiliary 24 VDC supply for connection of environmental sensors
• Integrated data logger for operation and fault data logging
• USB port for quick and handy saving of production and operation data
• Integrated DC circuit breaker under load
• Protection against overcurrent, overtemperature, reverse DC polarity, AC and DC overvoltage
• Natural ventilation minimizes breakdown and maintenance
• Full power without derating up to 50 °C ambient temperature
• Protection class: IP65 (suitable for both indoor and outdoor installation)

• Power factor controller for reactive power compensation
• Measures 73 power network parameters (40 visible on screen, all via Modbus RTU)
• Relay outputs: 4 / 6 / 8
• Programmable switch in time, switch off time and discharge time
• Alarm message and relay output
• Optional digital output: Modbus RTU (RS-485)
• Optional real time clock (RTC)
• LCD screen
• Operating temperature: -10...+60 °C
• Protection class (front): IP54

• Measures and records parameters in 3 and 4-wire, 3-phase, balanced or unbalanced power network
• Up to 500 electrical network quality parameters according to EN 50160, EN 61000-4-30, standards
• Measuring class A or A / S
• Support the IEC 60870-5-104 communication protocol (new - option)
• Analysis of voltage and current harmonics and interharmonics (up to the 51-st)
• Monitoring up to 6 additional energy meters with pulse output
• Recording of measurements before and after events (dips & swells)
• Configurable archives of logged values and events
• SD card support (up to 32 GB)
• Webserver function, FTP server, DHCP client
• Outputs: relays, binary, analog
• Binary inputs
• E-mail alarms
• Interfaces: RS-485 Modbus slave, Ethernet 100 Base-T (Modbus TCP server), USB device and host
• Color touchscreen: LCD TFT 5.6“
• Many data representation modes (i.e. digital display, analog, bar graph, vector diagram)
• IP65 protection class for front side
• Real time clock (RTC) synchronization with NPT time server
• Time synchronization via external GPS module - STR  receiver (new - option)

• The MQTT protocol is ideal for communication in distributed acquisition systems data (IoT applications)
• Measures 54 power network parameters (up to 63-rd harmonic, in 1- and 3-phase network)
• Color LCD TFT 3,5” display
• Additional 2 pages for harmonics presentation and 1 dedicated page for visualization in the form of an analog meter
• Display pages are fully configurable by user (10 pages. 8 parameters in each)
• 2 configurable alarm outputs
• Digital RS-485 Modbus output
• Optional: 0/4...20 mA output and 2xPt100 inputs
• Optional: logging of 32 parameters into internal 8 GB memory
• Modbus TCP/IP, HTTP, WWW server, FTP server, DHCP client

• Measures 16 power network parameters (1- and 3-phase network)
• Digital output: Modbus RTU (RS-485)
• Pulse outputs: 2
• Direct current measurement for up to 1/5 A
• Complies with EU directive 2004/22/EC annexes B and D (MID)
• On the MID Version, you can only program the CT Rate ONCE!
  The second time you set it up, the device will lock up and you will have to send it to the manufacturer for a reset.
• Backlit screen
• Operating temperature: -25...55 °C
• Protection class: IP51

• Measures 16 power network parameters (1- and 3-phase network)
• Digital output: Modbus RTU (RS-485)
• Pulse outputs: 2
• Direct current measurement for up to 100 A
• Complies with EU directive 2004/22/EC annexes B and D (MID)
• On the MID Version, you can only program the CT Rate ONCE!
  The second time you set it up, the device will lock up and you will have to send it to the manufacturer for a reset.
• Backlit screen
• Operating temperature: -25...55 °C
• Protection class: IP51

Measurement of 54 power network parameters, including current and voltage harmonics up to 63rd in 1-phase 2-wire or 3-phase 3 or 4-wire balanced and unbalanced systems

• High accuracy class (0.2S for active energy)
• Interface: RS-485 (Modbus RTU 8N2,8E1,8O1,8N1)
• Graphical color display: LCD TFT 3,5’’, 320 x 240 pixels, fully configurable by a user (10 screens, 8 parameters in each)
• Additional 2 screens for harmonics presentation and 1 dedicated screen for visualization in the form of an analog meter
• Memory of minimum and maximum values
• 2 configurable alarm outputs
• Supervisory relay mode for alarm outputs
• Password protection
• Programming of parameters using free eCon software
• Battery backup RTC
• Supply: 85...253 V ac / 90...300 V dc
• Operating temperature: -10…23…+55 °C
• Overall dimensions: 96 x 96 x 77 mm

Destined for direct (up to 63A) and indirect measurements in 3 phase 4 wire/3 wire balanced and unbalanced systems. For direct (up to 63A) and indirect measurement (x/1A or x/5A). Indications considering values of programmed ratios.

• The MQTT protocol is ideal for communication in distributed acquisition systems data (IoT applications)
• Data visualization in WWW server
• Convenient login from various devices (PC, tablet, phone)
• Readout of up to 2500 values of slave devices (up to 100 devices, 25 registers each)
• 8 GB Flash memory
• Real time clock (RTC)
• 2 alarm outputs or 2 binary inputs
• RS-232, RS-485, USB, Ethernet

• Molded epoxy resin protects against aggressive environmental factors
• Primary current: 60...160 A or 200...320 A
• Secondary current: 1 A or 5 A
• Hole diameter: 30 mm or 50 mm
• Hole depth: 50 mm or 40 mm
• Accuracy class: 1

• LW and LE series of current transformers with a round hole for a cable
• Ranges of primary current from 50A up to 5000A
• Maximum operating voltage 0,72 kV
• Secondary current: 1A or 5A
• Accuracy classes: 0.2S, 0.2, 0.5S, 0.5, 1; 3
• Terminals of the secondary circuit are protected by cover that protects them against accidental contact
• Operating temperature: -10…+55 °C

The PD9W is an industrial RS-232 / RS-485 to WiFi and Ethernet converter.

• Communication interfaces: 1x RS485, 1 x RS232, 1x Ethernet and WiFi (802.11b/g/n)
• Modes: AP, STA, AP + STA, AP + LAN, AP + WAN, Route and Bridge
• Work modes: transparent transmission mode, serial port command mode, HTTP Client mode, Modbus TCP<=>Modbus RTU mode and AT command mode
• Configuration the parameters via the WEB server
• RS232 port for RTS/CTS signals
• Hardware Watchdog, Heartbeat
• Electrostatic protection 15 / 8 kV
• Power supply: 5…36 V dc

PD9-Modbus RS485 to Ethernet converter can realize bidirectional transparent transmission between RS485 and Ethernet. It carries ARM processor, low power, fast speed, high stability. Via web-page or software, Rs-485 to Ethernet Converter can realize serial data and TCP/IP data package transparent transmission.

• Communication interfaces: 1x RS485, 1x Ethernet WAN/LAN
• Easy configuration the parameters via the webpage or set-up software
• Compact size, DIN rail mount
• Working mode: TCP server, TCP client, UDP server, UDP client
• Modbus RTU to TCP conversion, Modbus Polling
• DHCP support, IP dynamic or static
• Watchdog function
• Working temperature: -40…85°C
• Power supply: 5…36 V dc

• Up to 60 logical channels for data logging (max. up to 8 analog channels)
• Inputs:
  • Measuring programmable: 0, 4 or 8
  • Binary: 2 or 6
  • Modbus RTU Client: 10 devices, 10 registers each
• Outputs:
  • Relay: 2, 6 or 8
  • Analog 0 / 4...20 mA: 0, 4 or 8
  • Supplying output for external devices: 24V d.c. / 30 mA
• Communication interfaces:
  • RS-485 MODBUS (Client and Server)
  • Ethernet: MODBUS TCP/IP, Webserver (www), FTP
  • USB Host 2.0
• Screen: Graphical color display LCD TFT 3.5”
• Internal memory 8 GB for Archiving of measured parameters
• Visualization of measurements in digital form, analog indicators, line charts, bargraphs
• Advanced mathematical functions on measured values
• Archiving and visualization of measuring data transmitted to KD6 from external devices via RS-485 MODBUS 
• Settings secured with access password
• PC software for easier setup
• Protection class: IP65 (front)
• Operating temperature: -10...55 °C
• Supply: 85...253 V a.c., 90...300 V d.c. or 20...60 V d.c.

• Available versions with 2 to 8 primary windings
• Nickel plated secondary terminals
• Multiple mounting methods, including wall mounting and on DIN rail
• Applicable standard: IEC 61869-1/2
• Rated primary current: (2...8) x 5 A
• Rated secondary current: 5 A
• Rated burden: 5 / 10 / 15 / 20 / 25 A
• Max system voltage: 720 V
• Operating temperature: -25...+40 °C
• Accuracy class: 0,5 / 1

• Destined to synchronize generator, wind, water turbine and similar devices connecting to the network
• Eliminate voltage difference, frequency, and phase shift angle
• Ethernet interface 10/100 base-t, RS-485 interface with Modbus RTU protocol
• Web server, Modbus TCP / IP, DHCP server
• Protection class from frontal side: IP65, terminal side: IP20
• Electrical safety CAT III measurement category
• Voltage range (resolution): 20...180 V (0,1 V), 60...480 V (0,1 V), ...1920 kV (0,01 kV)
• Voltage difference (resolution): -20...0…20 % (0,1 %)
• Frequency range (resolution): 45...65 Hz (0,001 Hz)
• Frequency difference (resolution): -10...0...10 % (0,01 %)
• Phase shift (resolution): 0...360 o (0,1 o)

• Two set points
• Input: TC (J, K, T, R, S) / RTD (Pt100)
• Control output: relay or SSR
• Auxiliary output: relay
• PID / ON-OFF control
• Auto-Tuning / Self-Tuning
• Alarm modes: deviation, absolute
• Heating / cooling control
• 4+4 digits high contrast LED display
• Supply: 85…270V AC / DC
• Ambient temperature: 0…50 °C

• Inputs: Pt100, thermocouples J, K
• 4-digit 20 mm LED screen
• Automatic or manual compensation
• Programmable input, decimal point, averaging time
• 24 VDC output for external transducers
• Galvanic isolation
• Supply: 230 VAC / 240 VAC / 20...40 VAC / 20...40 VDC
• Protection class: IP65

• Transducer for DC current and voltage into other DC signal (1 output)
• Input, output and supply of the transducer are galvanic insolated
• Solves grounding problem in meshed signal networks
• User selectable type and range of input

• Up to 10 / 15 m level measurement with automatic temperature compensation
• Calculation of filling in the tank or flow in open channels
• Galvanically isolated 0/4...20 mA analog output
• Digital RS-485 Modbus RTU interface
• 2 alarm outputs
• Internal data and setup memory
• Two 32-points individual characteristics (for recalculation)
• LCD screen
• Housing protection grade: IP66
• Sensor protection grade: IP66 / IP 68
• Supply: 12...25...40 VDC
• Operating temperature: -20...23...55 °C

• Up to 10 / 15 m level measurement
• Analog output: 4…20 mA
• Digital output: RS-485 Modbus RTU
• Resolution: 3 mm
• Supply: 24 VDC / 300 mA
• Operating temperature: -20...60 °C
• Cable length: 1 m

The RE4X series controllers have a wide range of process control options and versions. Programmable inputs for standard signals, signal difference measurement between channels, control algorithms ON / OFF, PID, soft start and Fuzzy logic. Remote control with SCADA system through RS-485. The required output types can be selected during ordering (relays, SSR, analog).

Main features:

• Sampling rate (5 times / second)
• 1 input: TC and RTD sensors; standard signals 0 / 4…20 mA and 0…10 V
• 2 input: 0 / 4…20 mA and 0…10 V
• Binary input for changing the function of the controller and SP switching
• Outputs: relays - NO, SSR; analog - 0 / 4…20 mA and 0…10 V
• Galvanically isolated transducer and sensors power supply 24 V d.c. 25 mA
• Programmable digital filter
• Hardware and software security before changing settings
• Alarm for breaking the control loop
• Supply: 90…264 V a.c. or 11…26 V a.c. / d.c.
• Protection class: IP65

The RE12S Universal PID Controller is an advanced and versatile device designed for precise process control in various industrial applications. With adaptive, auto, and self-tuning PID as well as ON-OFF control capabilities, the RE12S ensures optimal performance in maintaining desired setpoints. It features a dual LED display, capacitive touch keypad, and supports up to 128-step profiling for complex control requirements. The unit's robust communication options, including RS485 MODBUS RTU, allow seamless integration into existing systems, enhancing both functionality and connectivity.

• Control algorithm: Adaptive, Auto, Self-tune PID, ON-OFF
• Input: Thermocouple (J, K, T, R, S, C, E, B, N, L, U, W, Platinel II), RTD (PT100), - 5…56mV, 0…10V, 0…20mA
• Alarm Outputs 3x: Multiple settings including deviation high/low, absolute high/low, band, sensor break
• Profile Controller: Up to 128 steps
• Special Modes: Heat-Cool PID, Auto/Manual, Single point ramp/soak, Soft start
• Communication: RS485 MODBUS RTU
• Power Supply: 90...270 VAC / DC (50/60Hz)
• Display: 4+4 digit, 7 segments
• Ambient temperature / humidity: 0…+50 °C / < 85%RH
• Dimensions: 52 x 52 x 76 mm

• In PD24 converter are used 2 interfaces (USB, RS232) - galvanically isolated
• USB interface (type A) – destined for the device communication with the computer
• RS-232 interface - destined for the communication with devices from the object side
• PD24 is programmer of LUMEL products to configure settings using eCon software
• Compliance with the standard USB 1.1 and USB 2.0
• Data transmission rate up to 115.2 kbps
• Support virtual serial port (COM)
• Device supplied from USB port and from the RS-232 (TTL) side
• Set includes 1,5 m data transmission cable with RJ12 plugs to configure LUMEL products
• External dimension: 62 x 25 x 20 mm

• In PD20 converter are used 2 interfaces (USB, RS485) - galvanically isolated
• USB interface (type A) – destined for the device communication with the computer
• RS-485 interface - destined for the communication with devices from the object side
• Compliance with the standard USB 1.1 and USB 2.0
• Data transmission rate up to 115.2 kbps
• Support virtual serial port (COM)
• Bi-directional data transmission (half duplex)
• Device supplied from USB port
• External dimension: 76 x 25 x 20mm
• Converter does not interfere into the structure of data transmission and is compatible with many industrial communication protocols

The LP10-V monitors the AC voltage of the system / equipment and protects it against overvoltage, undervoltage and phase failure problems. It also indicates faults with LED indicators.

Applications: Motor protection, Server rooms, Control system

Features:

• Compact size 17.5 mm
• True RMS measurement
• Under voltage protection
• Over voltage protection
• Phase unbalance protection
• Phase failure protection
• Phase incorrect sequence protection
• Neutral failure protection
• Adjustable Nominal voltage, Trip point, Trip time delay
• Onsite selection of VLL / VLN value-based tripping
• Self-powered
• 1CO, 1CO+1CO relay configuration
• LED indication for faults
• Disabling of Over & Under Voltage fault on site is possible

Bimetallic ammeters BA27, BA39, BE27, BE39 indicate flowing current and maximal flown current. When the user presses the button on the front of ammeter, maximal current indication arrow returns to the actual value.

BE27 and BE39 additionally indicate average current of 8-15 minute timespan. They are fit to indicate thermal current indication in transformers, cables and other electric devices. Measuring range can be extended according to customer’s demand.

• Panel electromagnetic devices are designed to measure effective values of current and voltage
• The devices are fit to be mounted in up to 15 mm-thick panels
• Meter EB16 is mounted on 35 mm rail
• Tropical version is also available
• Ammeters for use with transformers (X/1A and X/5A) available

• Panel devices are designed to measure AC and DC current and voltage
• Those with P index have integrated rectifier which enables the device to measure effective currents and voltages
• Asymmetric form signal measurement accuracy depends on harmonic component levels
• The devices are fit to be mounted in up to 15 mm-thick panels
• Meter MB16 is mounted on 35 mm rail
• Tropical version is also available
• Ammeters for use with transformers (X/1A and X/5A) available

• Measures and records power network parameters in single phase or three phase 3 and 4-wire symmetrical and asymmetrical systems
• 54 electrical network quality parameters
• Analysis of voltage and current harmonics (up to the 51-st)
• Color touchscreen: LCD TFT 3.5“, 320 x 240
• 2 configurable alarm outputs
• Analog output 0/4...20 mA and 2 x Pt100 inputs (optional)
• Digital output: RS-485 (MODBUS)
• Ethernet / Profinet 2.2
• Supply: 85...253 VAC / 90...300 VDC or 20...40 VAC / 20...60 VDC
• Battery backup RTC
• Dimensions: 96 x 96 x 77 mm