Apar

• 2 analog outputs (operating simultaneously):
  1. Current 4...20 mA or 0...20 mA (active output, cannot be supplied in two-wire current loop);
  2. Voltage 0...10 V.
• Soft start/stop (ramping) or a triangular wave generator triggered manually or automatically after switching power on
• 7-segment LED display with adjustable brightness
• Optional RS485/RS232 serial interface (galvanically isolated, MODBUS-RTU communication protocol)
• Password protection
• High accuracy and immunity to interference
• Supply: 230 VAC or 24 VAC/VDC
• Panel housing 96 x 48 x 79 mm
• Protection: IP65 (front) / IP20 (back)

Temperature regulator SCD210 is designed for temperature control in various devices and rooms. Made in three variants with different inputs. SCD210 has a step set point (SP) value change by signal option in binary input.

• Sensor AR434 compatible with Wireless data logger AR407
• Input:
  • RTD: Pt100 / Ni100
  • TC: J / K / S / B / R / T / E / N
  • Analog: 0…20mA / 4…20mA / 0÷10V / 0…60mV
  • Resistance: 0…700Ω
• Radio transmission in ISM 868MHz band, range up to 200 m in open space (400 m when retransmission activated requires supplying sensor via the mini-USB port)
• Built-in measurement of ambient temperature (20…70 °C)
• LCD display showing the measured values, messages and errors
• Protection: IP20
• Power supply: battery (3.6 V, AA type)
• Battery lifetime: up to 2 years, at room temperature, with measurement period > 40 min and uninterrupted radio transmission
• Parameter configuration via USB serial interface
• Variation of device without LCD screen (AR433)

• Data presentation and recording from up to 16 measuring channels
  • Wireless sensors of AR43x series
  • Any device with RS485 interface using MODBUS-RTU protocol
  • Any device with Ethernet interface using MODBUS-TCP protocol
  • One wired temperature sensor (AR182 or AR183)
• Radio transmission in ISM 868MHz band, range up to 200 m in open space (400 m when retransmission activated)
• Color LCD TFT graphic display with a touch screen
• 4 alarm outputs with acoustic and visual signaling of the operational status, possibility to send alarms by e-mail
• Internal memory: 4GB enough for 300 days of continuous recording of 16 channels every 1 second
• Time control / timer for outputs, available options: continuous operation, periodic daily (hourly), or limited by date and time
• Interfaces: USB, RS485, Ethernet
• Web server contains information about measurement channels, time, status of the alarms, recording, etc.
• Software for displaying recorded results as graphics or text (ARsoft-LOG) and for configuring the parameters (ARsoft-CFG)
• Protection: IP65 or IP30 from the front / IP20 from connectors side
• Power supply: 230VAC / 24VAC / 24VDC
• Operating temperature: 0…50°C

• Sensor AR437 compatible with Wireless data logger AR407
• Temperature measurement range: -30…+80 °C
• Humidity measurement range: 0…100 % RH
• Radio transmission in ISM 868MHz band, range up to 200 m in open space (400 m when retransmission activated requires supplying sensor via the mini-USB port)
• Protection: IP65
• Power supply: battery (3.6 V, AA type)
• Battery lifetime: up to 4 years, at room temperature, with measurement period > 30 min and uninterrupted radio transmission
• Parameter configuration via USB serial interface
• Device variation with external sensor (AR437/2)

• Sensor AR436 compatible with Wireless data logger AR407
• Temperature measurement range: -20…+70 °C / with external probe: -30…+80 °C
• Humidity measurement range: 0…100 % RH
• Radio transmission in ISM 868MHz band, range up to 200 m in open space (400 m when retransmission activated requires supplying sensor via the mini-USB port)
• LCD display showing the measured values, messages and errors
• Protection: IP20
• Power supply: battery (3.6 V, AA type)
• Battery lifetime: up to 2 years, at room temperature, with measurement period > 40 min and uninterrupted radio transmission
• Parameter configuration via USB serial interface
• Variation of device without LCD screen (AR435)

Data logger (recorder) AR207 is designed for temperature, standard DC voltage and current and pulse signal logging. 16/8 programmable channels. 4 programmable (NO or SSR) outputs for control and alarm. Color LCD TFT screen. Ethernet (web server function). Internal memory card which can be expanded using USB flash drive. Panel mounting. Multi-channel data presentation. Internal real time clock (RTC). Programming and data access protection.

Humidity and temperature regulator AR247 is designed for temperature and humidity control. The device is made with either integrated or cable-connected sensor. Protection class is IP65. Optionally can be ordered: RS-232 or RS-485 ports, analog output 0/4...20 mA or 0...10 VDC (for control or signal transmission).

General purpose regulator AR630 is designed for usage in humid or dusty environment (IP65). RS-232, RS-485 or analog ports are optional. Two programmable inputs (for temperature sensors and DC). Settings are protected by password. Set point blocking. Manual output control. Modification AR632 has two indicators (for set point (SP) and process value (PV)).

General purpose regulator with one programmable input and 2 or 3 outputs. Variant with RS-485 is used for work in measuring systems. Programmable binary input for remote work mode modification. PID autotuning. Free software for configuration. Manual control feature.

• Universal measuring inputs, it can be used for controlling of temperature (RTD, thermocouple) and other physical values
• Colored TFT display presentation of measured values (numerical values, bar graph, meter, graph)
• Control algorithms On-Off; PID; 12 segmental adjustment program
• Interfaces: USB, RS485 (MODBUS-RTU) and Ethernet (100Base-T, TCP / IP protocols: Modbus-TCP, HTTP, SMTP)
• Internal webserver, information about the active channel, measuring parameters and the status of the regulation, requires access
• Available alarm sound and visual, status outputs and alarm notification e-mail
• Write data in a standard text file located in the internal controller memory (4GB) FAT with the possibility of editing in spreadsheets such as Microsoft Excel
• Selection of PID parameters for each output
• The possibility of creating inter-channel type mathematical and logical operations: the difference, average, sum, bigger, smaller measurement
• Function digital inputs (BIN) to changes modes associated outputs, retransmission of measurements
• Free software for data processing and device programming