Search

• Temperature measurement range: -20...+60 °C
• Humidity measurement range: 0...100 %RH
• Pressure measurement range: 600...1100 hPa
• CO2 concentration measurement range: 0...5000 ppm
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: 1 s...24 h
• Internal sensors
• GSM modem (GPRS)
• SMS and JSON messages can be sent via GPRS data connection
• Messages can be sent on alarms and periodically
• Data can be transferred to PC via USB-C interface
• Calibration certificate of manufacturer included
• Ambient temperature: -20...+60 °C
• Supply: 5200 mAh LiIon battery
• Protection class: IP20
• Warranty: 3 years

• Universal air and environment quality sensor E2-CO2-series measures CO₂ (carbon dioxide) level, temperature, humidity, pressure, sound level, ambient light (LUX). Transmits instant values, average hourly values, and average 24-hour values
• Communication: wM-BUS EN13757-3/4:2013, complies OMS 4.0.2
  • Modes: C1-A/B, T1 or S1 (selectable on order)
• Measurement ranges
  • Temperature: -40…85 °C
  • Humidity: 0…100 % RH (non-condensing)
  • CO2: 0…5000 ppm (0…55 °C)
  • LUX: 0,01…83000 LUX at same frequency as the human eye
  • Absolute pressure: 20…100 kPa
  • Sound level: 20…90 dBa at 850 Hz
• Measurement accuracy
  • Temperature: ± 0,2 at +5…+60 °C; ± 0,5 at -20…+85 °C
  • Humidity: ± 2 % RH at 20…80 % RH; ± 3 % RH at 10…90 % RH; ± 3,5 % RH at 0…100 % RH
  • CO2: ± (50 ppm + 3%)
  • LUX: 4 %
  • Pressure:  0,4 kPa
• CO2 sensor calibrates every 20 days
• Warnings about low battery, CO₂ sensor malfunction, calibration not performed yet
• Transmission interval: every 90 seconds
• Measured values sample interval: every 6 minutes
• LED and sound indication about CO₂ exceeded limit
• Device has 2 antennas for maximum range in both vertical and horizontal directions
• Power supply: 2 x ER18505 3.6 V Li-SOCI2 battery pack (8200 mAh)
  • Up to 14 years battery lifetime, standard configuration and operating temperature

TSM400-1-CP is a multi-parameters sensor that supports the 1-Wire protocol. The sensor measures the concentration of carbon dioxide and atmospheric pressure.

• CO2 measurements range: 400…5000 ppm
  • Accuracy: ± (40 ppm + 5 %)
  • Resolution: 1 ppm
  • Calibration: manual
• Pressure measurements range: 10…1200 hPa
  • Accuracy (min): ±1.5 (25°C, 750 hPa)
  • Accuracy (max): ±2.5 (-20 °C to + 85 °C, 300…1100 hPa)
  • Resolution: 1 hPa
• Operating temperature range: -20…+60°C
• Operating relative humidity range: 5…95% (non-condensing)
• Ingress protection: IP20
• Operating voltage range: 4,5…26 VDC

TSC201 is a compact current sensor with a 1-Wire interface and an input range up to 10 A, designed for AC and DC current monitoring. Its range allows direct measurement of low currents or connection to current transformers (CTs) with 10 A secondary output for accurate indirect monitoring of higher currents.

• 1-Wire protocol current transmitter
• Current measurement range: 0,1...10 A (AC / DC)
• Measuring accuracy: ± 1 %
• Resolution: 0,01 A
• Galvanic isolation between the current circuit and 1-Wire bus
• Power supply: 4,0…5,5 V
• Excellent long-term stability
• Warranty: 3 years

TSM400-1-TH is a digital temperature and humidity sensor with a 1-Wire interface. Suitable for monitoring air quality of server rooms, data centers, offices and stores.

• Temperature measurement range: -20…+60°C
  • Accuracy (min): ± 0,4 °C (in -10…+60°C range)
  • Accuracy (max): ± 0,6 °C (in -20…+60°C range)
  • Resolution: 0,1 °C
• Relative humidity measurement range: 10 to 90% (non-condensing)
  • Accuracy (min): ± 3.0 % RH (in 20…80 % RH range)
  • Accuracy (max): ± 5.0 % RH (in 10…90 % RH range)
  • Resolution: 0,1 %RH
• Excellent long-term stability
• The unique 64-Bit serial number for multi-sensors support
• Ingress protection: IP20
• Operating voltage range: 4,5…26 VDC

• Digital inputs: 2
• 1-Wire input (up to 8 sensors)
• RS-485 input (up to 8 sensors)
• Analog inputs: 4 (2 x 0...10 VDC, 2 x 0...10 VDC / 4...20 mA, WEB control)
• Relay outputs: 4 (NO/NC)
• Setup via USB or SMS
• Data logger for up to 52 000 records
• Webserver
• Periodical upload of data logger file to a remote HTTP server
• HTTP Post, HTTP API
• Communication: 4G-LTE, 3G-WCDMA
• SMS alarms (up to 5 numbers)
• E-mail alarms (up to 5 recipients), SMT with TLS support
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...28 VDC

• 4G LTE supported frequency bands:
  • B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/ B66/B34/B38/B39/B40/B41
• 3G supported frequency bands:
  • B1/B2/B4/B5/B6/B8/B19
• 2G supported frequency bands:
  • B2/B3/B5/B8
• M2M communication protocols: MQTT, HTTP API (XML or JSON)
• Setup via WEB interface through the USB or remote setup with HTTP API or SMS commands
• Digital inputs: 2 “dry contacts”
• 1-Wire input (up to 4 sensors)
• Analog inputs: 2 (0...60 VDC)
• Relay outputs: 2 (NO/NC)
• E-mail alarms (up to 5 recipients), SMTP with TLS support
• SMS alarms (up to 5 recipients)
• GSM Geolocation (optional)
• Firmware update over the air (FOTA)
• Operating temperature: -20...+55 °C
• Supply: 10…28 VDC

TCG210-4 is a battery-powered 4G parcel temperature and humidity logger with fallback support for 2G communication. The device is compatible with HTTP/HTTPS API protocols, making it suitable for modern IoT applications. It periodically sends HTTP/HTTPS POST requests to a remote server, containing a status file in JSON format and the most recent logged data in CSV format.

• Global connectivity - Quad-band 4G LTE Cat.1 with 2G fallback ensures reliable operation worldwide.
• Battery-powered autonomy - Operates for months without external power, ideal for parcel monitoring and remote applications.
• Intelligent power management - Advanced sleep mode significantly extends battery life.
• Flexible configuration - Easy setup via Wi-Fi, SMS, or HTTP API.
• Real-time alerts - Instant SMS alarm notifications to up to five phone numbers.
• Integrated sensing - High-accuracy temperature and humidity sensor for critical parcel monitoring.
• Large data storage - Onboard memory for up to 70,000 logged records.
• Seamless IoT integration - Periodic HTTP/HTTPS POST with current status in JSON format.
• Data export - Automatic upload of logged data in CSV format to a remote server.
• Remote management - Full device control through HTTP API commands.
• Future-proof - Firmware update over Wi-Fi or 4G LTE keeps the device always up to date.
• Compact and lightweight - Designed for easy deployment in parcel logistics, cold chain transport, and warehousing.
• Safe for air transport - Powered by a compliant Li-SOCl₂ battery (IATA DGR, UN 3091, PI970 Section II), suitable for air shipment.

COMET Cloud is an Internet data storage designed for recording measured values from selected COMET measuring instruments. The data is accessible after the user's connection to the Internet and is displayed in a web browser in the form of a table or graph. Users can be notified by e-mail of all alarm conditions reported by the device. After purchasing a device that supports connection to the COMET Cloud, you can register the device in the COMET Cloud. Each user has access only to their account, which is password protected. If you run a large number of devices in the COMET Cloud, you can clearly organize them into groups and assign new users to them, who can have an overview of the group of devices. Different rights for data display and administration can be set for individual users.

Notification app for Android or iOS

• Makes available the list of sent alarm messages from COMET Cloud
• Allows instant alarming with notifications
• The application will be expanded to display measured values
• Can be installed on Android and iOS mobile device

TSH202B is a compact humidity and temperature sensor with 1-Wire interface. It is ideal for use in a variety of applications where space is limited, such as environmental monitoring systems, HVAC control, and more.

• Fully calibrated digital output
• Excellent long-term stability
• A unique 64-bit serial number for multi-sensor systems
• 3.0% relative humidity accuracy
• 12-bit resolution for humidity measurements
• 14-bit resolution for temperature measurements

• Data logger (4 MB, up to 1 year of backup)
• Sample rate: 60 s...18 h
• Communication: GSM/3G/HSPA/Telstra arba GSM/2G/GPRS arba CDMA/Verizon
• Certificates: FCC, ETSI, C-TICK
• Option: GPS
• 1 input: for sensors with SDI-12 interface
• 2 input: double analog/digital/counter input or I2C interface
• USB connection: for charging and RanchMgr communication
• LCD screen
• Remote control
• Solar panel
• Supply: battery (typical run time without sunlight is 1 month)

• Temperature measurement range: -20...+60 °C
• Accuracy: ±0.4 °C
• Internal temperature sensor
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: 1 s...24 h
• Internal sensor
• GSM modem (GPRS)
• SMS and JSON messages can be sent via GPRS data connection
• Local alarms via LED indication, on LCD screen and acoustically by built-in beeper
• Data can be transferred to PC via USB-C interface
• Calibration certificate of manufacturer included
• Ambient temperature: -20...+60 °C
• Supply: 5200 mAh LiIon battery
• Protection class: IP67
• Warranty: 3 years

• CO2 concentration measurement range: 0...5000 ppm
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: 1 s...24 h
• Internal sensor
• GSM modem (GPRS)
• SMS and JSON messages can be sent via GPRS data connection
• Messages can be sent on alarms and periodically
• Data can be transferred to PC via USB-C interface
• Calibration certificate of manufacturer included
• Ambient temperature: -20...+60 °C
• Supply: 5200 mAh LiIon battery
• Protection class: IP20
• Warranty: 3 years

• Inputs: 4x external Pt1000 sensors
  • Measuring range: -200…+260 °C
  • Accuracy: ± 0.2 °C (± 0,2 %, when temperature is in range of +100...+260 °C)
  • Resolution: 0,1 °C
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: adjustable 1 s, 10 s, 1 min
• GSM modem (GPRS)
• SMS and JSON messages can be sent via GPRS data connection
• Messages can be sent on alarms and periodically
• Data can be transferred to PC via USB-C interface
• Calibration certificate included
• Ambient temperature: -20...+60 °C
• Supply: rechargeable Li-Ion battery A8200, 3.6V/5200mAh
• Protection class: IP20
• Warranty: 3 years

• Digital inputs: 2
• 1-Wire input (up to 8 sensors)
• RS-485 input (up to 8 sensors)
• Analog inputs: 4 (2 x 0...10 VDC, 2 x 0...10 VDC / 4...20 mA, WEB control)
• Relay outputs: 4 (NO/NC)
• Setup via USB or SMS
• Data logger for up to 52 000 records
• Webserver
• Periodical upload of data logger file to a remote HTTP server
• HTTP Post, HTTP API
• SMS alarms (up to 5 numbers)
• E-mail alarms (up to 5 recipients), SMT with TLS support
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...24 VDC

• Digital inputs: 2
• 1-Wire input (up to 4 sensors)
• Analog inputs: 2 (0...60 VDC)
• Relay outputs: 2 (NO/NC)
• Setup via USB or SMS
• Webserver
• HTTP Post, HTTP API
• SMS alarms (up to 5 numbers)
• E-mail alarms (up to 5 recipients), SMTP with TLS support
• Operating temperature: 0...40 °C
• Warranty: 3 years
• Supply: 10...28 VDC

The enLink Status-VC transmits data using long range LoRa wireless which easily integrates with cloud services or on-site Systems.

• 0…20 mA, 0…10 V or resistance input
• 12 bit resolution
• Communication: LoRaWAN; frequency range: 863-870 MHz; up to 16 km range
• Measurement sending interval: 30 s to 3 hours
• 2 x Li-SOCl2 (3.6V) AA sized batteries ensure 3+ years of operation
• Configuration via USB cable / downlink
• Case IP40 protection (IP 67 on request)

The enLink IAQ Vape transmits data using long range LoRa wireless which easily integrates with cloud services or on-site Systems.

• Sensed parameters: Temperature, Relative humidity, VOC, CO2, Particles PM (0.1, 0.3, 0.5, 1.0, 2.5, 5.0 & 10), Barometric pressure, Sound*, Ozone**, Arsine*, Formaldehyde*, Methyl Mercaptan*, Chlorine*, Carbon Monoxide*, Ethylene Oxide*, Hydrogen*, Hydrogen Sulphide*, Hydrogen Cyanide*, Ammonia*, Nitrogen Dioxide*, Oxygen*, Odorous gases*, Phosphine*, Sulphur Dioxide*
• Distinguishes between vaping and smoke and counts the number of detections
• Communication: LoRaWAN; frequency range: 863-870 MHz; up to 16 km range
• Measurement sending interval: 30 s to 3 hours or adaptive (triggered by vape or smoke)
• Power suplly: 12…24V V DC, 0.15 Amp (max)
• Configuration via USB cable / downlink
• Operating Temp. / Humidity: 0…40 °C / 0…95 % RH

The enLink OAQ Vape transmits data using long range LoRa wireless which easily integrates with cloud services or on-site Systems.

• Sensed parameters: Temperature, Relative humidity, VOC, CO2, Particles PM (1.0, 2.5, 4.0 & 10), Barometric pressure, Ozone**, Arsine*, Formaldehyde*, Methyl Mercaptan*, Chlorine*, Carbon Monoxide*, Ethylene Oxide*, Hydrogen*, Hydrogen Sulphide*, Hydrogen Cyanide*, Ammonia*, Nitrogen Dioxide*, Oxygen*, Odorous gases*, Phosphine*, Sulphur Dioxide*
• Communication: LoRaWAN; frequency range: 863-870 MHz; up to 16 km range
• Measurement sending interval: 30 s to 3 hours
• Power supply: 12…24V V DC, 0.15 Amp (max) / 4 x Li-SOCl2 (3.6V) AA / external solar panel
• Configuration via USB cable / downlink
• IP rating: IP42 (conformally coated electronics), do not expose to direct sunlight
• Operating Temp. / Humidity: -10…40 °C / 0…95 % RH (be kondensacijos)

The enLink Status-P transmits data using long range LoRa wireless which easily integrates with cloud services or on-site Systems.

• 3 channels pulse counter (S0 standard) and monitor of state (open / closed)
• With the transmit on Change of State enabled the unit operates as a standard pulse counter and also transmits a message when the state of the input changes from closed to open or open to closed
• The pulse counts for each channel are written to memory every 5 – 10 minutes
• Communication: LoRaWAN; frequency range: 863-870 MHz; up to 16 km range
• Measurement sending interval: 30 s to 3 hours or adaptive (triggered by change of state)
• 2 x Li-SOCl2 (3.6V) AA sized batteries ensure 3+ years of operation
• Configuration via USB cable / downlink
• Case IP40 protection (IP 67 on request)

The enLink Status-T transmits data using long range LoRa wireless which easily integrates with cloud services or on-site Systems.

• External sensor measurement range: -55…+125 °C
  • Accuracy: ± 0.5 °C (-10…+85 °C)
• Up to two probes (cable length: 1 m, others on request)
• Communication: LoRaWAN; frequency range: 863-870 MHz; up to 16 km range
• Measurement sending interval: 30 s to 3 hours or adaptive (triggered by alarm)
• 2 x Li-SOCl2 (3.6V) AA sized batteries ensure 3+ years of operation
• Configuration via USB cable / downlink
• Each sensor can be programmed individually for different alarm type: No alarming, High threshold alarm, Low threshold alarm, In band alarm, Out of band alarm
• Each alarm type has an individual alarm status message with the following parameters: Alarm status, Total number of alarm activations, Alarm duration
• Case IP40 protection (IP 67 on request)

The Wx9xx series of sensors from COMET SYSTEM enables accurate measurement of temperature, relative humidity, and atmospheric pressure, with data transmitted via the low-power LoRaWAN network. This technology allows data to be sent to a cloud storage, where users can easily view both current and historical values through a standard web browser. Each sensor has an LCD display showing the measured value and battery status.

• Possibility to connect Pt1000 sensors
• Covers up to 15 km in rural areas and 2…5 km in urban areas
• Work with Comet System LoRaWAN gateway SP041
• Battery life: from 1 to 10 years depending on transmission time and environment temperature
• Unlimited space for data in cloud
• Alarm: email and app notification
• Mobile applications for Android and iOS

• The battery or mains powered wireless M-Bus gateway B4 is highly configurable plug-and-play device used for collecting data from Wireless M-Bus meters / sensors and transmitting the data using LTE CAT-M1 and MQTT protocol
• Long range and high sensitivity internal (or external mounted) antennas
• To maximize the battery lifetime possible configuration to listen number of minutes, specific time during day, specific days and limit number of packets stored per meter / week / day / hour
• The gateway firmware can be upgraded remotely using MQTT
• B4 series gateway can be used with Lansen R4 series repeaters and transmit additional information (see datasheet)
• Configuration can be done with: Lansen Wireless M-BUS programming dongle together with our program, Lansen Configurator, other wireless M-BUS transmitters or remotely using the MQTT protocol
• Possible to activate 128 bit AES-key encryption
• Gateway suited for harsh environments, operating temperature: -30…+85 °C, protection class: IP40, IP65 and IP67
• IoT LTE M SIM card needed (acquired separately)

Measurement of 54 power network parameters, including current and voltage harmonics up to 63rd in 1-phase 2-wire or 3-phase 3 or 4-wire balanced and unbalanced systems

• High accuracy class (0.2S for active energy)
• Interface: RS-485 (Modbus RTU 8N2,8E1,8O1,8N1)
• Graphical color display: LCD TFT 3,5’’, 320 x 240 pixels, fully configurable by a user (10 screens, 8 parameters in each)
• Additional 2 screens for harmonics presentation and 1 dedicated screen for visualization in the form of an analog meter
• Memory of minimum and maximum values
• 2 configurable alarm outputs
• Supervisory relay mode for alarm outputs
• Password protection
• Programming of parameters using free eCon software
• Battery backup RTC
• Supply: 85...253 V ac / 90...300 V dc
• Operating temperature: -10…23…+55 °C
• Overall dimensions: 96 x 96 x 77 mm

• Sensor AR434 compatible with Wireless data logger AR407
• Input:
  • RTD: Pt100 / Ni100
  • TC: J / K / S / B / R / T / E / N
  • Analog: 0…20mA / 4…20mA / 0÷10V / 0…60mV
  • Resistance: 0…700Ω
• Radio transmission in ISM 868MHz band, range up to 200 m in open space (400 m when retransmission activated requires supplying sensor via the mini-USB port)
• Built-in measurement of ambient temperature (20…70 °C)
• LCD display showing the measured values, messages and errors
• Protection: IP20
• Power supply: battery (3.6 V, AA type)
• Battery lifetime: up to 2 years, at room temperature, with measurement period > 40 min and uninterrupted radio transmission
• Parameter configuration via USB serial interface
• Variation of device without LCD screen (AR433)

• 1-Wire interface
• Temperature measurement range: -20...+60 °C
  • Accuracy: ±0.4°C (in -10 to +60°C range); ±0.6°C (in -20 to +60°C range)
• Humidity measurement range: 10...90 % RH
  • Accuracy: ±3.0%RH (in 20 to 80 %RH range); ±5.0%RH (in 10 to 90 %RH range)
• Protection class: IP54
• Resolution: 12 bits for temperature and humidity
• Long-term stability
• Warranty: 3 years

• Input: 4x external temperature probes (Pt1000)
• Temperature measurement range: -90…+260 °C
• Accuracy: 0,2 in the range -90…+100
• Resolution: 0,1 °C
• Simple sensor connection to existing WIFI network (standard: IEEE 802.11 b/g/n)
• Measured values can be sent to the internet storage COMET Cloud or COMET Database
• Communication protocols: HTTP(S), SMTP, Modbus TCP, HTTP POST, HTTP GET (JSON, XML)
• Alarm signalization: e-mail, acoustic, LED, SMS - additional order
• Measuring interval: 1 s
• Sending interval to COMET Cloud: adjustable 5 min. to 12 hours
• Calibration certificate of manufacturer included
• Operating temperature: -30…+60 °C
• Supply: 5,0…5,4 VDC USB-C connector
• Protection class: IP30

• Temperature measurement range: -20…+60 °C
• Humidity measuring range: 0…95 % RH
• Dew point measuring range: -60…+60 °C
• CO2 measuring range: 0…5000 ppm
• Atmospheric pressure measuring range: 700…1100 hPa
• Simple sensor connection to existing WIFI network (standard: IEEE 802.11 b/g/n)
• Measured values can be sent to the internet storage COMET Cloud or COMET Database
• Communication protocols: HTTP(S), SMTP, Modbus TCP, HTTP POST, SNMP (v1, v2c, v3), HTTP GET (JSON, XML)
• Alarm signalization: e-mail, acoustic, LED, SMS - additional order
• Measuring interval: 1 s
• Sending interval to COMET Cloud: adjustable 5 min. to 12 hours
• Calibration certificate of manufacturer included
• Operating temperature: -30…+60 °C
• Supply: 5,0…5,4 VDC USB-C connector
• Protection class: IP30

• MA series converters reads Wired M-Bus meters and transmit the data wirelessly using the Wireless M-Bus protocol
• Reads data from up to 500 devices
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: T1
• AES-128 encryption mode 5, profile A
• Automatically search wired meters and sends data
• Two internal antennas or one external antenna
• Power supply: 100…240 VAC
• Protection class: IP67

• Data presentation and recording from up to 16 measuring channels
  • Wireless sensors of AR43x series
  • Any device with RS485 interface using MODBUS-RTU protocol
  • Any device with Ethernet interface using MODBUS-TCP protocol
  • One wired temperature sensor (AR182 or AR183)
• Radio transmission in ISM 868MHz band, range up to 200 m in open space (400 m when retransmission activated)
• Color LCD TFT graphic display with a touch screen
• 4 alarm outputs with acoustic and visual signaling of the operational status, possibility to send alarms by e-mail
• Internal memory: 4GB enough for 300 days of continuous recording of 16 channels every 1 second
• Time control / timer for outputs, available options: continuous operation, periodic daily (hourly), or limited by date and time
• Interfaces: USB, RS485, Ethernet
• Web server contains information about measurement channels, time, status of the alarms, recording, etc.
• Software for displaying recorded results as graphics or text (ARsoft-LOG) and for configuring the parameters (ARsoft-CFG)
• Protection: IP65 or IP30 from the front / IP20 from connectors side
• Power supply: 230VAC / 24VAC / 24VDC
• Operating temperature: 0…50°C

Sensor SKU: 5905309601192 (IP30)

Sensor SKU: 5905309601482 (IP67)

Wireless 4…20 mA / 0…10 V analog signal data logger, sensor interface, BLE allows users to connect analog sensors to the cloud**. Device can be equipped with up to four analog interfaces / transducers (2 x 4…20 mA and 2 x 0…10 V). Transducer can be powered* either from the device’s battery or by an external power source.

You can use a free mobile application to configure the device and read the data from its memory. If you add Efento Gateway, you can build a remote monitoring system.

• Communication: BLE (Bluetooth Low Energy)
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery (on request 1000 mAh rechargeable battery (USB 5V))
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• External transducers can be powered by the device's battery (max. 16V, 30 mA)
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -15…+70 °C / 0…99 %
• Case IP30 protection (IP 67 on request)

Sensor SKU: 5905309600072 (IP30)

Sensor SKU: 5905309600607 (IP67)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud** platform or any other third party systems.

• Wireless 4…20 mA / 0…10 V analog signal sensor interface, data logger, NB-IoT measures analog readings and can send data over NB-IoT
• Device can be equipped with up to four analog interfaces / transducers (2 x 4…20 mA and 2 x 0…10 V)
• Transducer can be powered* either from the device’s battery or by an external power source
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -35…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection (IP67 on request)

Environmental monitoring gateway with an integrated touchscreen dashboard.

Gateway Pro is the central hub for your Aranet wireless sensor network. It collects data from connected sensors and forwards it to Aranet Cloud or to local integrations for real-time monitoring. The built-in touchscreen enables quick on-site setup and sensor pairing. Full gateway management, data visibility, and analytics are available via Aranet Cloud. Gateway Pro supports Wi-Fi or Ethernet and integrations via MQTT and Modbus TCP/IP.

Maximum sensor count: 100
Storage: no local storage, cache memory of up to 7200 readings in case connection to Aranet cloud lost
Radio sensitivity allows receiving signals from sensors up to 3 km away (in plain sight)
Port: RJ45 with PoE 802.3af power and internet input or USB-C 5 VDC 1 A power input
Communication: Ethernet, Wi-Fi 2.4 GHz client mode
Supported Aranet sensors: CO2, Temperature, Radon, Particle matter (PM), Soil moisture. (For specific models see datasheet)
Integrations: MQTT, Modbus TCP/IP, (BACnet IP and InfluxDB coming soon)
Operating environment: 0...45 °C / 0…90 % RH

Wireless Aranet radation sensor is portable device for measuring levels of ionizing radiation (γ, β) and x-rays. This sensor ensures comprehensive ionizing radiation monitoring by measuring both the total dose and dose rate. Perfect for home use to ensure the safety of your family and yourself! Ideal for travelers, explorers, and individuals who are frequently near radiation sources.

• Detected types of radiation: γ, β, x-rays
• Ionizing radiation dose measurement range: 0…1000 µSv/h or 0…100 mrem/h
• Measures radiation dose rate (µSv/h / mrem/h) and total dose (mSv / rem)
• Dose accumulation time limit: 2 years
• Bluetooth Low Energy connection with smartphone (Android or iOS) using Aranet Home mobile app
• Supply: 2 x AA batteries
• Battery lifetime (20 °C): up to 4 years (see datasheet)
• Measuring intervals: 1, 2, 5, 10 min. (If the radiation threshold is surpassed, the device automatically switches to a 1-minute interval)
• Audial ionizing radiation detection feature (pulse counter buzzer)
• E-Ink display for longer battery life
• Operating temperature: 0...+50 °C
• Protection class: IP20

Sensor SKU: 5905309601338 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Atmospheric pressure measurement range: 300…1100 hPa, accuracy: absolute +/- 3 hPa in temperature 0…+65°C, relative +/- 0,12 hPa in temperature 0…+65°C
• Temperature measurement range: -35…+70 °C, accuracy up to 0,4 °C in the range from -20°C to +70°C and 0,5 °C in the range -35…-20 °C
• Relative humidity measurement range: 0…99 % RH, accuracy up to 4 % in 0…80 % RH and 7 % in the range 81…99 %
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -35…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327660 (IP30)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Atmospheric pressure measurement range: 300…1100 hPa, accuracy: absolute +/- 3 hPa in temperature 0…+65°C, relative +/- 0,12 hPa in temperature 0…+65°C
• Temperature measurement range: -15…+70 °C, accuracy: up to 0,4 °C
• Relative humidity measurement range: 0…99 % RH, accuracy 4 % in 0…90 % RH
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection

An environmental monitoring solution that acts as a gateway, data storage, and web server. Receives sensor measurements from Aranet PRO series devices using Aranet Sub-GHz ISM band radio. Features rugged IP67 casing for outdoor use and PoE power input for ease of commissioning. Additionally, 4G LTE connectivity enables usage in areas lacking local internet access.

Using Aranet Cloud* provides centralized and remote access to data from any number of sensors and base stations, with all sensors accessible in one place.

• Maximum sensor count*: 100/50/12
• Alarms: email, SMS
• Local data storage: up to 10 years for 100 sensors
• Radio sensitivity allows receiving signals from sensors up to 3 km away (in plain sight)
• Port: RJ45 with PoE 802.3af power input
• Communication: Ethernet, Wi-Fi 2.4 GHz access point or client mode, 4G LTE
• Data protection methods: XXTEA, HTTPS, password-protected user accounts
• Integrations*: MQTT, Modbus TCP/IP, BACnet IP
• Operating temperature: -40...60 °C
• Protection class: IP67

• Temperature measurement range: 0...+50 °C
• Humidity measurement range: 0...85 %
• Pressure measurement range: 300...1100 hPa
• CO2 concentration measurement range: 0...9999 ppm
• Operational range (in line-of-sight): up to 10 m (Bluetooth Low Energy)
• Data is sent to smartphone (Android, iOS), no need for special receiver
• Data transmission: 1, 2, 5, 10 min
• Aranet4 anti-theft wall mount is available
• Data encryption
• Supply: 2 x AA batteries
• Battery lifetime (20 °C): up to 2 years
• Operating temperature: 0...+50 °C
• Protection class: IP20

Sensor SKU: 5906660327868 (IP30)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud** platform or any other third party systems.

• Carbon dioxide (CO2) measurement range: 400…5000 ppm, accuracy: +/- (40 ppm + 5 % of reading)
• Atmospheric pressure measurement range: 300…1100 hPa, accuracy: absolute +/- 3 hPa in temperature 0…+65°C, relative +/- 0,12 hPa in temperature 0…+65°C
• Temperature measurement range: -15…+70 °C, accuracy: up to 0,4 °C
• Relative humidity measurement range: 0…99 % RH, accuracy 4 % in 0…80 % RH
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection

Sensor measures carbon dioxide (CO2) concentration, temperature, and atmospheric pressure. This device, belonging to the PRO sensor series, includes Aranet Sub-GHz ISM band radio which wirelessly transmits sensor measurements to the Aranet PRO base station.

• CO2 measurements:
  • Range: 0…9999 ppm
  • Resolution: 1 ppm
  • Accuracy: ± (30 ppm + 3 % of reading)
• Atmospheric pressure measurements:
  • Range: 300…1100 hPa
  • Resolution: 1 hPa
  • Accuracy: +3 hPa / -2 hPa
• Temperature measurements:
  • Range: 0…50 °C
  • Resolution: 0,1 °C
  • Accuracy: ± 0.3 °C
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Data encryption
• Supply: 1 x AA battery
• Battery lifetime (20 °C): up to 8 years
• Operating temperature: -40…60 °C
• Protection class: IP67

Measures analog signal of a 3rd party sensor. Provides 24 or 12 VDC power for a 3rd party sensor using the built-in power supply unit (PSU).

• Sensor compatible with base stations: PRO, PRO Plus ir PRO Plus LTE
• Current measurement range: 0...30 mA
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Operating temperature: -30...+80 °C
• Power supply: 85…265 VAC
  • 1 x AA battery is for to notify user in case of external
• Protection class: IP67

• Current measurement range: 0...30 mA
• Operational range (in line-of-sight): up to 3 km
• Cable length: 1 m
• Data transmission: 1, 2, 5, 10 min
• Data encryption
• Supply: 1 x AA battery
• Battery lifetime (20 °C): up to 10 years
• Operating temperature: -40...60 °C
• Protection class: IP68

Sensor SKU: 5905309601475 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Differential pressure measurement range: +/- 500 Pa, accuracy: up to 1 Pa
• Length of measuring tubes: 1 m (another lengths on request)
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh, 3xAA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -15…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327820 (IP30)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Differential pressure measurement range: +/- 500 Pa, accuracy: up to 1 Pa
• Length of measuring tubes: 1 m (another lengths on request)
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Case IP30 protection

Measure the difference in air pressure between two points as needed in HVAC (air filter condition), building automation and Pharma. This device, belonging to the PRO sensor series, includes Aranet Sub-GHz ISM band radio which wirelessly transmits sensor measurements to the Aranet PRO base station.

• Pressure range: ± 500 Pa
• Resolution: 0,02 Pa
• Accuracy: ± (0.10 Pa + 3 % of reading)
• Long term drift: 0,05 Pa / year
• Response time: (99 %) <1 s
• Calibrated for Air, N2
• Gas compatibility: Air, N2, O2
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Data encryption
• Supply: 1 x AA battery
• Battery lifetime (20 °C): up to 10 years
• Operating temperature: -40…60 °C
• Protection class: IP65

Sensor SKU: 5905309601376 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Device monitor state of relays or reed switches (1 channel for input)
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -35…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327714 (IP30)

Sensor SKU: 5905309600713 (IP67)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Device monitor state of relays or reed switches (1 channel for input)
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Sensor's configuration can be changed remotely from the cloud or with a mobile application over Bluetooth Low Energy
• Operating temperature: -35…+70 °C
• Case IP30 protection (IP67 on request)

Designed to monitor electrical, gas, and water meters, as well as other measurement devices that have a dry contact pulse output feature. This device, belonging to the PRO sensor series, includes Aranet Sub-GHz ISM band radio which wirelessly transmits sensor measurements to the Aranet PRO base station.

• Maximum pulse frequency: 25 Hz
• Minimum pulse width: 10 ms
• Minimum interval between pulses: 30 ms
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Data encryption
• Supply: 1 x AA battery
• Battery lifetime (20 °C): up to 10 years
• Operating temperature: -40...+60 °C
• Protection class: IP67

Broadsens edge-computing wireless gateways connect and control multiple wireless low-power sensors such as SVT200-A, SVT300-A, SVT400-A, SVT200-V, SVT300-V and SVT400-V.

BroadVibra software is installed inside the wireless gateway. The software has intuitive interface and can be accessed from all major web browsers remotely. The software is ideal for predictive maintenance and conditional based monitoring.

• Communication with sensor: 2.4GHz BLE
• Up to 190 sensors supported
• Network interface: Ethernet, Wi-Fi 802.11ac wireless
• Communication protocol: MQTT, TCP/IP, UDP, Modbus TCP & RTU (RS-485), OPC UA
• Integrated Database: 64 / 128 GB
• Notifications and alarms sent by email (SMTP)
• Vibration analysis: Velocity, RMS, True peak, Peak-peak, STD, Crest factor, Kurtosis, trend analysis, FFT analysis, advanced filtering, frequency fine tuning, trigger modes
• Working environment: -30...+60 °C, 10...90 %RH
• Additional features: 2nd power connector, 2 x GPIO ports (input or output, see manual)

Sensor SKU: 5905309601512 (IP30)

Sensor SKU: 5905309601598 (IP67)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• External sensor measurement range: -70…+450 °C
  • Accuracy: to 0.3 °C in 0 °C and 1.8 °C in 300 °C
• Default probe cable length: 1 m (other lengths on request)
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh, 3xAA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -15…+70 °C / 0…99 %
• Case IP30 protection (IP 67 on request)