Search

• Measures and records parameters in 3 and 4-wire, 3-phase, balanced or unbalanced power network
• Up to 500 electrical network quality parameters according to EN 50160, EN 61000-4-30, standards
• Measuring class A or A / S
• Support the IEC 60870-5-104 communication protocol (new - option)
• Analysis of voltage and current harmonics and interharmonics (up to the 51-st)
• Monitoring up to 6 additional energy meters with pulse output
• Recording of measurements before and after events (dips & swells)
• Configurable archives of logged values and events
• SD card support (up to 32 GB)
• Webserver function, FTP server, DHCP client
• Outputs: relays, binary, analog
• Binary inputs
• E-mail alarms
• Interfaces: RS-485 Modbus slave, Ethernet 100 Base-T (Modbus TCP server), USB device and host
• Color touchscreen: LCD TFT 5.6“
• Many data representation modes (i.e. digital display, analog, bar graph, vector diagram)
• IP65 protection class for front side
• Real time clock (RTC) synchronization with NPT time server
• Time synchronization via external GPS module - STR  receiver (new - option)

Power network meter N100 for electric quality to measurements parameters 3 and 4-wire, 3-phase, balanced or unbalanced power network systems with data logging.

The measurement of: values of voltage and current, active, reactive and apparent power, active, reactive energy, power factors, frequency, up to 51st THD.

• Two-color LED display
• Backlit units of all measured quantities
• Configurable analog and alarm outputs
• Digital RS-485 interface, MODBUS
• Archiving data in the internal memory file system memory 8 GB
• Ethernet interface, protocol: MODBUS TCP/IP, HTTP, FTP
• services: www server, ftp server, DHCP client

• Designed for direct or indirect measurement of 1-phase network parameters
• Measured values: U, I, f, P, Q, S, PF, tg fi, fi, Ep, Eq
• Direct measurements up to 63 A
• Universal input: 1/5 A 100/400 VAC or 32/63 A, 100/400 VAC
• Outputs: RS-485 (MODBUS interface), 1x relay + 1x analog or 2x relay
• OLED display
• Programmable current and voltage transformer ratios
• Programmable via buttons or free eCon software (through USB)
• Size: 53 x 110 x 60 mm

• Measurement of power network parameters in 1-phase and 3-phase (3 or 4-wire) systems
• Current inputs 0,1 A and 0,25 A (for dedicated transformers)
• Quick and convenient ways to connect current transformers via RJ12 connector or screw terminals
• Designed for usage with following transformers: LJ12, LJ25, LJ35, LJ45, LJ306, LJ307, LJ308
• RS-485 (MODBUS RTU) interface
• THD factor measurement
• Backlighted LCD 3,5”
• Protection grade from the frontal side: IP65

Measurement of 54 power network parameters, including current and voltage harmonics up to 63rd in 1-phase 2-wire or 3-phase 3 or 4-wire balanced and unbalanced systems

• High accuracy class (0.2S for active energy)
• Interface: RS-485 (Modbus RTU 8N2,8E1,8O1,8N1)
• Graphical color display: LCD TFT 3,5’’, 320 x 240 pixels, fully configurable by a user (10 screens, 8 parameters in each)
• Additional 2 screens for harmonics presentation and 1 dedicated screen for visualization in the form of an analog meter
• Memory of minimum and maximum values
• 2 configurable alarm outputs
• Supervisory relay mode for alarm outputs
• Password protection
• Programming of parameters using free eCon software
• Battery backup RTC
• Supply: 85...253 V ac / 90...300 V dc
• Operating temperature: -10…23…+55 °C
• Overall dimensions: 96 x 96 x 77 mm

• Pressure range: from 0...2,5 to 0...700 bar
• Process temperature: -40...+125 °C
• Process connection: G1/4" m, G1/4" m (Manometer), 1/4"NPT m, 1/8"NPT m, 7/16"-20UNF SAE J512 f, 7/16"-20UNF SAE4 m, 7/16"-20UNF m DIN3866, R1/4" m DIN3858, R1/4" m DIN2999, R1/8" m, M10x1 m, M12x1.5 m
• Protection class: IP65, IP67

• 2 analog outputs (operating simultaneously):
  1. Current 4...20 mA or 0...20 mA (active output, cannot be supplied in two-wire current loop);
  2. Voltage 0...10 V.
• Soft start/stop (ramping) or a triangular wave generator triggered manually or automatically after switching power on
• 7-segment LED display with adjustable brightness
• Optional RS485/RS232 serial interface (galvanically isolated, MODBUS-RTU communication protocol)
• Password protection
• High accuracy and immunity to interference
• Supply: 230 VAC or 24 VAC/VDC
• Panel housing 96 x 48 x 79 mm
• Protection: IP65 (front) / IP20 (back)

Destined for direct (up to 63A) and indirect measurements in 3 phase 4 wire/3 wire balanced and unbalanced systems. For direct (up to 63A) and indirect measurement (x/1A or x/5A). Indications considering values of programmed ratios.

• Meter to measurements electric quality parameters in 3 phase systems
• Programmable display pages
• 3 programmable alarm outputs and 1 pulse output
• Digital transmission to the master system through the RS-485 interface
• USB for configuration by using free eCon software

• Ethernet connection
• Digital inputs: 2
• 1-Wire input (up to 2 sensors)
• Analog inputs: 2 (0...60 VDC)
• Relay outputs: 2 (NO/NC)
• Webserver
• HTTP and XML API commands
• E-mail alarms, SMTP, SNMP
• Operating temperature: -20...55 °C
• Warranty: 3 years
• Supply: 10...14 VDC

• Signal splitter DAT5022
• Configurable with switches on body
• 3-way galvanic isolation (2000 VAC)
• Input: 4...20mA, 0...20mA, 0...10V, 0...5V, 2...10V, 1...5V
• Output: 2 X (4...20mA, 0...20mA, 0...10V, 0...5V, 2...10V, 1...5V)
• Power Supply: 18...32 VDC. Reverse polarity protection 60 VDC
• Current Consumption: Current output 35 mA max. Voltage output 25 mA max.
• Environment: -20...+70 °C / (non-condensing) 0-90%
• Housing: Self-extinguishing material
• EMC
  • Immunity: EN 61000-6-2
  • Emission: EN 61000-6-4

They are used to regulate the power delivered to the receiver, where this power is proportional to the input control signal. They are used in automation control systems where smooth control of receiver power is required for resistive or resistive-inductive loads. Typical applications for power controllers: heaters, industrial furnaces (annealing, quenching, drying, etc.), dryers, plastics processing equipment, industrial sealing machines, glass production industry, industrial heating systems (matting and lining of pipelines), load transformers.

• Single-phase power controller (phase angle load control)
• Control input: DC voltage 0...10 V DC (RSR92-..V..) or current 4...20 mA (RSR92-..I..)
• SCR output (thyristors)
• Load current 25...80 A
• Max. load voltage 280, 530 V AC (single-phase)
• Dielectric strength 4 000 Vrms (opto-isolation)
• MOV protection (built-in varistor)
• Mounting on panel or on heatsinks
• Recognitions, certifications, directives: RoHS, REACH, CE, EAC

RSP-E25-... is a Class I+II SPD for surge and lightning protection of low-voltage power supply systems, especially in high-risk exposure areas or building entrances in LPZ 0-2 (IEC 62305-4), protecting against damage caused by direct or nearby lightning strikes; suitable for use in main distribution boards.

• IEC / EN / VDE category: Class I+II / Type 1+2 / B+C
• Application: main distribution boards (MB)
• Power networks: TT, TN-S, TN-C
• Protection modes: L-N, N-PE
• Protective elements: MOV, MOV+GDT
• Enclosure: modular (replaceable module)
• Mechanical status indicator: green/red flag
• Compliant with standards: IEC/EN 61643-11:2011, IEC 60364-4-53, IEC 62305, CE, RoHS

• Destined to synchronize generator, wind, water turbine and similar devices connecting to the network
• Eliminate voltage difference, frequency, and phase shift angle
• Ethernet interface 10/100 base-t, RS-485 interface with Modbus RTU protocol
• Web server, Modbus TCP / IP, DHCP server
• Protection class from frontal side: IP65, terminal side: IP20
• Electrical safety CAT III measurement category
• Voltage range (resolution): 20...180 V (0,1 V), 60...480 V (0,1 V), ...1920 kV (0,01 kV)
• Voltage difference (resolution): -20...0…20 % (0,1 %)
• Frequency range (resolution): 45...65 Hz (0,001 Hz)
• Frequency difference (resolution): -10...0...10 % (0,01 %)
• Phase shift (resolution): 0...360 o (0,1 o)

• Universal datalogger with 4 inputs, 2 for voltage, current, logic and pulse signals and 2 for connecting temperature and humidity probes.
• Measures carbon dioxide (CO2) using the integrated sensor.
• Measures barometric pressure using the integrated sensor.
• Multilogger can be installed permanently to Ethernet network or work as a portable device.
• Measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.
• Calibration certificate included.
• 3 rechargeable AA batteries with a power adapter, wall holder and USB cable are included in the delivery.
• Temperature (Pt1000) and humidity probes are ordered separately. Cable length – 1, 2, 5, 10, 15 meters.
• Open collector transistor alarm output.

• Universal datalogger with 4 inputs, 2 for voltage, current, logic and pulse signals and 2 for connecting temperature and humidity probes.
• Measures carbon dioxide (CO2) using the integrated sensor.
• Multilogger can be installed permanently to Ethernet network or work as a portable device.
• Measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.
• Calibration certificate included.
• 3 rechargeable AA batteries with a power adapter, wall holder and USB cable are included in the delivery.
• Temperature (Pt1000) and humidity probes are ordered separately. Cable length – 1, 2, 5, 10, 15 meters.
• Open collector transistor alarm output.

• Universal datalogger with 4 inputs, 2 for voltage, current, logic and pulse signals and 2 for connecting temperature and humidity probes.
• Measures barometric pressure using the integrated sensor.
• Multilogger can be installed permanently to Ethernet network or work as a portable device.
• Measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.
• Calibration certificate included.
• 3 rechargeable AA batteries with a power adapter, wall holder and USB cable are included in the delivery.
• Temperature (Pt1000) and humidity probes are ordered separately. Cable length – 1, 2, 5, 10, 15 meters.
• Open collector transistor alarm output.

• Universal datalogger with 4 inputs, 2 for voltage, current, logic and pulse signals and 2 for connecting temperature and humidity probes.
• Multilogger can be installed permanently to Ethernet network or work as a portable device.
• Measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.
• Calibration certificate included.
• 3 rechargeable AA batteries with a power adapter, wall holder and USB cable are included in the delivery.
• Temperature (Pt1000) and humidity probes are ordered separately. Cable length – 1, 2, 5, 10, 15 meters.
• Open collector transistor alarm output.

• Universal datalogger with 4 hardware MiniDIN inputs, 2 for thermocouples K, J, S, B, T, N and 2 for connecting temperature and humidity probes.
• Cold junction compensation (CJC).
• Sensors of physical quantities with bipolar voltage output can also be connected. Two voltage ranges: -18...+18 mV and -60...+140 mV.
• Multilogger can be installed permanently to Ethernet network or work as a portable device.
• Measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.
• Calibration certificate included.
• 3 rechargeable AA batteries with a power adapter, wall holder and USB cable are included in the delivery.
• Temperature (Pt1000) and humidity probes are ordered separately. Cable length – 1, 2, 5, 10, 15 meters.
• Open collector transistor alarm output.

• Universal datalogger with 4 hardware MiniDIN inputs for thermocouples K, J, S, B, T, N.
• Cold junction compensation (CJC).
• Sensors of physical quantities with bipolar voltage output can also be connected. Two voltage ranges: -18...+18 mV and -60...+140 mV.
• Multilogger can be installed permanently to Ethernet network or work as a portable device.
• Measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.
• Calibration certificate included.
• 3 rechargeable AA batteries with a power adapter, wall holder and USB cable are included in the delivery.
• Thermocouples are ordered separately.
• Open collector transistor alarm output.

Temperature and standard signal transducer P30U.

• Programmable input
• Mathematical functions
• Individual channel characteristic
• 1 or 2 outputs
• Variant with internal transducer 24 VDC power supply
• RS-485 interface
• Adjustable dimension
• Data logging into internal memory (4 MB) or SD/SDHC card (4 GB)
• Transducer programming with buttons or via PC (“LPConfig” software)

They are used to regulate the power delivered to the receiver, where this power is proportional to the input control signal. They are used in automation control systems where smooth control of receiver power is required for resistive or resistive-inductive loads. Typical applications for power controllers: heaters, industrial furnaces (annealing, quenching, drying, etc.), dryers, plastics processing equipment, industrial sealing machines, glass production industry, industrial heating systems (matting and lining of pipelines), load transformers.

• Three-phase power controller (phase angle load control)
• Control input: DC voltage 0...10 V DC or current 4...20 mA
• SCR output (thyristors)
• Load current 25...80 A
• Max. load voltage 530 V AC (three-phase)
• Dielectric strength 4 000 Vrms (opto-isolation)
• MOV protection (built-in varistor)
• Mounting on heatsinks
• Recognitions, certifications, directives: RoHS, REACH, CE, EAC

• Transducer for AC current and voltage into DC signal (1 output)
• Input, output and supply of the transducer are galvanic insolated
• The construction of the transducer ensures accurate and fast signal transformation
• Fast and easy installation on rail, or onto a wall or in panel using holder

• Transducer for DC current and voltage into other DC signal (1 output)
• Input, output and supply of the transducer are galvanic insolated
• Solves grounding problem in meshed signal networks
• User selectable type and range of input

• Transducer for DC current and voltage into other DC signal (2 outputs)
• Input, output and supply of the transducer are galvanic insolated
• The construction of the transducer ensures accurate and fast signal transformation
• Fast and easy installation on rail, or onto a wall or in panel using holder

• Signal transducer P20Z is designed to convert AC current and voltage (without direct component) into DC voltage or current signal
• Input is isolated from input and supply
• Has fixed inputs and outputs – non-programmable

• Input (single option): 100 V, 250 V, 400 V, 1 A, 5 A, 20...500 Hz
• Digital output: RS-485 (Modbus RTU)
• Relay outputs: 2x OC
• Display: 3-color LED, 5-digit
• Galvanic isolation
• Supply: 85...253 VAC/VDC / 20...40/60 VAC/VDC
• Protection class: IP65

• Input (single option): 0...100 V, ±100 V, 0...400 V, ±400 V
• Digital output: RS-485 (Modbus RTU)
• Relay outputs: 2x OC
• Display: 3-color LED, 5-digit
• Galvanic isolation
• Supply: 85...253 VAC/VDC / 20...40 VAC/VDC
• Protection class: IP65

• Input (single option): Pt100, J, K, 0...20 mA, 4...20 mA, ±20 mA, 0...75 mV, 0...10 V, ±10 V, 0...150 mV, ±75 mV, V150 mV
• Voltage measurement range: 0...75 mV; 0...150 mV; 0...10 V (DC)
• Current measurement range: 0/4...20 mA; ±20 mA (DC)
• Temperature measurement range: -50...400 °C (Pt100); -50...1200 °C (J) / -50...1370 °C (K)
• Digital output: RS-485 (Modbus RTU)
• Relay outputs: 2x OC
• Auxiliary 24 VDC output to supply transducers
• Display: 3-color LED, 5-digit
• Temperature compensation
• Galvanic isolation
• Supply: 85...253 VAC/VDC / 20...40 VAC/VDC
• Protection class: IP65

• EDP2041 is standard signals generator (digital potentiometer) with outputs:
  • 0…10 V; Resolution: 1 mV; Fluctuation: max 30 mA; Rise time from 0 to 10V is max. 300ms
  • 0 / 4…20 mA; Accuracy: 0.1 %; Resolution: 2 µA; Fluctuation: max. 60 µA
• Preset value can be adjusted from external buttons
• Communication via RS-485 Modbus protocol or synchronous running between two or more potentiometers
• Display scale can be adjusted between -1999 and 9999
• Soft on and soft off properties can be selected
• 4 digits display
• Parameter access protection on 3 levels
• Supply: 230 V AC; 24 V AC; 9…30 V DC
• Ambient temperature: 0…50 °C

The LP10-V monitors the AC voltage of the system / equipment and protects it against overvoltage, undervoltage and phase failure problems. It also indicates faults with LED indicators.

Applications: Motor protection, Server rooms, Control system

Features:

• Compact size 17.5 mm
• True RMS measurement
• Under voltage protection
• Over voltage protection
• Phase unbalance protection
• Phase failure protection
• Phase incorrect sequence protection
• Neutral failure protection
• Adjustable Nominal voltage, Trip point, Trip time delay
• Onsite selection of VLL / VLN value-based tripping
• Self-powered
• 1CO, 1CO+1CO relay configuration
• LED indication for faults
• Disabling of Over & Under Voltage fault on site is possible

• Universal datalogger with 4 inputs for voltage, current, logic and pulse signals.
• Multilogger can be installed permanently to Ethernet network or work as a portable device.
• Measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.
• Calibration certificate included.
• 3 rechargeable AA batteries with a power adapter, wall holder and USB cable are included in the delivery.
• Open collector transistor alarm output.

• Voltmeters for AC voltage measurement EP27, EP29 with a change-over switch
• Panel electromagnetic devices, designed for effective voltage measurement
• Change-over switch, when activated, enable the measurement of linear and phase voltage (6 measurement points)
• Tropical version is available (TIII)
• Voltmeters for usage with voltage transformers (X/100 V and X/110 V) are also available

Designed for precisely measuring electricity usage and frequency of use. Pulse counter belonging to the PRO sensor series, includes Aranet Sub-GHz ISM band radio which wirelessly transmits sensor measurements to the Aranet PRO base station.

• Compliance with MID certificate
• Maximum current: 40 A
• Nominal voltage: 230 V, 50 Hz
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Data encryption
• Supply (pulse counter): 1 x AA battery
• Battery lifetime (20 °C): up to 10 years
• Protection class sensor / meter: IP67 / IP40

Designed for precisely measuring electricity usage and frequency of use. Pulse counter belonging to the PRO sensor series, includes Aranet Sub-GHz ISM band radio which wirelessly transmits sensor measurements to the Aranet PRO base station.

• Compliance with MID certificate
• Maximum current: 80 A
• Nominal voltage: 3 x 230 / 400 V, 50 / 60 Hz
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Data encryption
• Supply (pulse counter): 1 x AA battery
• Battery lifetime (20 °C): up to 10 years
• Protection class sensor / meter: IP67 / IP40

Measures analog signal of a 3rd party sensor. Provides 24 or 12 VDC power for a 3rd party sensor using the built-in power supply unit (PSU).

• Sensor compatible with base stations: PRO, PRO Plus ir PRO Plus LTE
• Voltage measurement range: -32...32 VDC
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Operating temperature: -30...+80 °C
• Power supply: 85…265 VAC
  • 1 x AA battery is for to notify user in case of external
• Protection class: IP67

• Voltage measurement range: -32...32 VDC
• Operational range (in line-of-sight): up to 3 km
• Cable length: 1 m
• Data transmission: 1, 2, 5, 10 min
• Data encryption
• Supply: 1 x AA battery
• Battery lifetime (20 °C): up to 5 years
• Operating temperature: -40...80 °C
• Protection class: IP68