Search

• Temperature measurement range: -20...+60 °C
• Humidity measurement range: 0...100 %RH
• Pressure measurement range: 600...1100 hPa
• CO2 concentration measurement range: 0...5000 ppm
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: 1 s...24 h
• Internal sensors
• GSM modem (GPRS)
• SMS and JSON messages can be sent via GPRS data connection
• Messages can be sent on alarms and periodically
• Data can be transferred to PC via USB-C interface
• Calibration certificate of manufacturer included
• Ambient temperature: -20...+60 °C
• Supply: 5200 mAh LiIon battery
• Protection class: IP20
• Warranty: 3 years

• Universal air and environment quality sensor E2-CO2-series measures CO₂ (carbon dioxide) level, temperature, humidity, pressure, sound level, ambient light (LUX). Transmits instant values, average hourly values, and average 24-hour values
• Communication: wM-BUS EN13757-3/4:2013, complies OMS 4.0.2
  • Modes: C1-A/B, T1 or S1 (selectable on order)
• Measurement ranges
  • Temperature: -40…85 °C
  • Humidity: 0…100 % RH (non-condensing)
  • CO2: 0…5000 ppm (0…55 °C)
  • LUX: 0,01…83000 LUX at same frequency as the human eye
  • Absolute pressure: 20…100 kPa
  • Sound level: 20…90 dBa at 850 Hz
• Measurement accuracy
  • Temperature: ± 0,2 at +5…+60 °C; ± 0,5 at -20…+85 °C
  • Humidity: ± 2 % RH at 20…80 % RH; ± 3 % RH at 10…90 % RH; ± 3,5 % RH at 0…100 % RH
  • CO2: ± (50 ppm + 3%)
  • LUX: 4 %
  • Pressure:  0,4 kPa
• CO2 sensor calibrates every 20 days
• Warnings about low battery, CO₂ sensor malfunction, calibration not performed yet
• Transmission interval: every 90 seconds
• Measured values sample interval: every 6 minutes
• LED and sound indication about CO₂ exceeded limit
• Device has 2 antennas for maximum range in both vertical and horizontal directions
• Power supply: 2 x ER18505 3.6 V Li-SOCI2 battery pack (8200 mAh)
  • Up to 14 years battery lifetime, standard configuration and operating temperature

• 1-Wire protocol ambient pressure sensor TSP200
• Pressure measurement range: 300...1100 hPa
• Excellent long-term stability
• Warranty: 3 years
• Connection: RJ-11

TSM400-1-CP is a multi-parameters sensor that supports the 1-Wire protocol. The sensor measures the concentration of carbon dioxide and atmospheric pressure.

• CO2 measurements range: 400…5000 ppm
  • Accuracy: ± (40 ppm + 5 %)
  • Resolution: 1 ppm
  • Calibration: manual
• Pressure measurements range: 10…1200 hPa
  • Accuracy (min): ±1.5 (25°C, 750 hPa)
  • Accuracy (max): ±2.5 (-20 °C to + 85 °C, 300…1100 hPa)
  • Resolution: 1 hPa
• Operating temperature range: -20…+60°C
• Operating relative humidity range: 5…95% (non-condensing)
• Ingress protection: IP20
• Operating voltage range: 4,5…26 VDC

• Sturdy
• Hanging hook
• 3 'Y' ¼” 'MFL connectors including one with a Schrader valve

• Maximal pressure measurement range: 0...7000 Pa
• Air flow and velocity measurement
• LCD screen
• Allowed overpressure: 25 kPa
• Supply: 9 V battery
• Operating temperature: 10...+50°C
• Protection class: IP54

• Maximal pressure measurement range: 0...1000/2000/5000/7000 Pa
• Air flow and velocity measurement
• Output: 0...10 V / 2...10 V or 4...20 mA
• Option: autozero function and LCD screen
• Allowed overpressure: 25 kPa
• Supply: 10...35 VDC
• Operating temperature: -40...+50°C (see datasheet)
• Protection class: IP54

A and B connection threads:

G1/4, G1/2, M20x1,5, M10x1, M12x1,5, M20x1,5, G3/4, M16x1,5, M22x1,5,

Spec,  G1/2L*

*  -  left-hand thread

Material: stainless steel-DIN 1.4301 (AISI 304)

Note: other ordering versions possible.

• Measures ambient air pressure
• Measurement range: 600...1100 hPa
• Operating temperature: -30...80 °C
• Output: Ethernet
• Optional connection to WiFi network via tiny wireless router TL-WIFI
• Webserver
• Measurement interval: 2 s
• Alarm protocols: E-mail, SNMP Trap, Syslog
• Supply: 9...30 VDC
• Protection class: IP30
• Calibration certificate included

• CO2 concentration measurement range: 0...10 000 / 50 000 ppm
• External sensor cable length 1 / 2 / 4 m
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: 10 s...24 h
• Calibration certificate included
• LED, acoustic alarms
• LCD screen
• Data can be transferred to PC via USB-C interface
• Operating temperature: -20...+60 °C
• Supply: battery
• Protection class: IP54
• Warranty: 3 years

• Measurement range: -40...+150 °C, -1...60 bar
• Temperature measurement accuracy: ± 1,3 °C
• Pressure measurement accuracy: ±0,5 % of full scale
• Operating temperature: -20...+50 °C
• Overload: 65 bar
• Android / iOS app for communication with the device (via Bluetooth Low Energy interface)
• 124 refrigerant gases

Temperatre, humidity and pressure meters, loggers Cxxxx, Dxxxx.
Cxxxx are designed for indication (without data logging), Dxxxx indicates and logs listed parameters.

• Compact pressure switch for shipbuilding, engine manufacturing, railways, machine tools, hydraulics
• Measuring principle: piston
• Measured pressure from 1...10 to 40...400 bar
• Output signal: floating change-over contact (SPDT)
• Switching differential: not adjustable
• Media temperature: -25...+125 °C
• Ambient temperature: -25...+85 °C
• Conformity: ABS, BV, CCS, DNV, GL, KRS, LRS, NKK, RINA, EN60730-1 / EN60730-2-9: Typ 2.B.H

• Compact pressure switch for shipbuilding, engine manufacturing, railways, machine tools, hydraulics
• Measuring principle: membrana
• Measured pressure from 1...10 to 10...100 bar
• Output signal: floating change-over contact (SPDT)
• Switching differential: not adjustable
• Media temperature: 0...+80 °C
• Ambient temperature: 0...+80 °C
• Conformity: ABS, BV, CCS, DNV, GL, KRS, LRS, RINA, EN60730-1 / EN60730-2-6: Typ 2.B.H

• To measure and data logging: carbon dioxide (0...5000 ppm), temperature (0...50 °C), atmospheric pressure (800...1100 hPa), humidity (0…100 % RH) in air and neutral gases
• Free software for configuration and data visualization
• Bluetooth communication for smartphones and tablets (Android and IOS)
• Safety lock magnetic mounting with inviolability system holder (accessories)
• Compatible with food industry environment
• Up to 4 recordable parameters simultaneously
• Optional calibration certificate

The DPI series electronic pressure measuring devices are engineered for building automation in HVAC/R industry. The most technologically advanced and versatile electronic differential pressure switches on the market, combining up to two relay outputs and 0–10 V output options.

• Range: from 0....60 to 0...5 kPa
• Accuracy: ±2% (FS 20°C)
• Allowed overpressure: 20 kPa
• Operating temperature: -5...+60°C

Differential manometer DPG/PS for air and non-aggressive gasses, designed for pressure monitoring and control. Used in ventilation and conditioning systems for filter permeability control.

• Range: 0…1500 Pa
• Switch activation range: 20…1500 Pa
• Operating temperature: -5… +60°C

Differential manometer MM for air and non-aggressive gasses, designed for pressure measurement in narrow ranges.

• Range: -100…1500 Pa
• Operating temperature: -40… +60°C

Differential manometer MM/PS for air and non-aggressive gasses, designed for pressure monitoring and control. Used in ventilation and conditioning systems for filter permeability control.

• Range: 0…1500 Pa
• Switch activation range: 40…1500 Pa
• Operating temperature: -20… +60°C

• Pressure range: from -1...6 to -1...18 bar
• Output signal: 1 Floating change-over contact (SPDT)
• Process temperature: -40...+150 °C
• Process connection: G1/4" f, G1/8" f, G1/2" m
• Protection class: IP65

Differential pressure switch is designed for use in air and non-aggressive gasses. Made by HK Instruments (Finland).

• To measure air and neutral gases pressure in range -10 000...10 000 Pa
• Configuration with switches or software: measuring ranges, units, outputs settings
• Housing with simplified mounting system
• Optional with display or without display
• Range: -10 000...10 000 Pa
• Accuracy: ± 1.5 % of reading ± 3 mmH2O
• Resolution: 1 Pa; 0.1 mmH2O; 0.01 mbar; 0.01 inWG; 0.01 mmHG; 0.1 daPa; 0.001 kPa
• Measurement units: Pa, mmH2O, inWG, mmHG, daPa, kPa, hPa, mbar
• Response time: 0.3 s
• Output (Optional):0-10 V ir 4-20 mA; 4-20 mA
• Overpressure tolerated: 69 000 Pa
• Conditions of use: 0…+50 °C. In non-condensing condition
• Communication to PC: USB-mini DIN cable
• Protection: IP65
• Power supply (Optional): 24 V AC / V DC; 16 / 30 V DC

• To measure air and neutral gases pressure in range -100...100 Pa
• Solenoid valve for auto-calibration: frequency 1…60 min
• Configuration with switches or software: measuring ranges, units, outputs settings
• Housing with simplified mounting system
• Optional with display or without display
• Range: -100...100 Pa
• Accuracy: ± 1 % of reading ± 2 Pa
• Resolution: 1 Pa; 0.1 mmH2O; 0.01 mbar; 0.01 inWG; 0.01 mmHG; 0.1 daPa; 0.001 kPa
• Measurement units: Pa, mmH2O, inWG, mmHG, daPa, kPa, hPa, mbar
• Response time: 0.3 s
• Output: 0-10 V and 4-20 mA
• Overpressure tolerated: 21 000 Pa
• Conditions of use: 0…+50 °C. In non-condensing condition
• Communication to PC: USB-mini DIN cable
• Protection: IP65
• Power supply: 24 V AC / V DC

• To measure air and neutral gases pressure in range -1000...1000 Pa
• Configuration with switches or software: measuring ranges, units, outputs settings
• Housing with simplified mounting system
• Optional with display or without display
• Range: -1000...1000 Pa
• Accuracy: ± 1.5 % of reading ± 3 Pa
• Resolution: 1 Pa; 0.1 mmH2O; 0.01 mbar; 0.01 inWG; 0.01 mmHG; 0.1 daPa; 0.001 kPa
• Measurement units: Pa, mmH2O, inWG, mmHG, daPa, kPa, hPa, mbar
• Response time: 0.3 s
• Output (Optional): 0-10 V ir 4-20 mA: 4-20 mA
• Overpressure tolerated: 21 000 Pa
• Conditions of use: 0…+50 °C. In non-condensing condition
• Communication to PC: USB-mini DIN cable
• Protection: IP65
• Power supply (Optional): 24 V AC / V DC: 16 / 30 V DC

• To measure air and neutral gases pressure in range -2000...2000 mbar
• Configuration with switches or software: measuring ranges, units, outputs settings
• Housing with simplified mounting system
• Optional with display or without display
• Range: -2000...2000 mbar
• Accuracy: ± 1.5 % of reading ± 3 mbar
• Resolution: 1 mbar; 0.1 inWG; 1 mmHG; 1 mmH2O; 1 hPa; 10 daPa; 0.1 kPa; 0.1 PSI
• Measurement units: mbar, inWG, mmHG, PSI, mmH2O, daPa, hPa, kPa
• Response time: 0.3 s
• Output (Optional): 0-10 V ir 4-20 mA; 4-20 mA
• Overpressure tolerated: 4100 mbar
• Conditions of use: 0…+50 °C. In non-condensing condition
• Communication to PC: USB-mini DIN cable
• Protection: IP65
• Power supply (Optional): 24 V AC / V DC: 16 / 30 V DC

• To measure air and neutral gases pressure in range -500...500 mbar
• Configuration with switches or software: measuring ranges, units, outputs settings
• Housing with simplified mounting system
• Optional with display or without display
• Range: -500...500 mbar
• Accuracy: ± 1.5 % of reading ± 3 mbar
• Resolution: 1 mbar; 0.1 inWG; 1 mmHG; 1 mmH2O; 1 hPa; 10 daPa; 0.1 kPa; 0.1 PSI
• Measurement units: mbar, inWG, mmHG, PSI, mmH2O, daPa, hPa, kPa
• Response time: 0.3 s
• Output (Optional): 0-10 V ir 4-20 mA; 4-20 mA
• Overpressure tolerated: 1400 mbar
• Conditions of use: 0…+50 °C. In non-condensing condition
• Communication to PC: USB-mini DIN cable
• Protection: IP65
• Power supply (Optional): 24 V AC / V DC; 16 / 30 V DC

• PID controller
• 2 set points (SP), chosen by binary input
• Pressure measurement range: -250...2500 Pa
• Output: 0...10 V
• Input: NTC10, NTC20, Pt1000, Ni1000
• LCD screen
• Temperature compensation
• Allowed overpressure: 25 kPa
• Supply: 24 VDC/VAC
• Operating temperature: -20...+50°C
• Protection class: IP54

• Maximal pressure measurement range: 0...2500 Pa
• 8 field selectable measurement ranges (via jumper)
• Output: 4...20 mA
• Option: LCD screen
• Allowed overpressure: 25 kPa
• Supply: 10...35 VDC
• Operating temperature: -10...+50°C
• Protection class: IP54

• Two pressure transmitters in one device
• Pressure measurement range: -250...2500 / -250...7000 Pa
• Option: DPT-DUAL-MOD-AHU – with air flow transmitter
• Output: Modbus RTU
• Allowed overpressure: 25 kPa
• Supply: 24 VDC/VAC
• Operating temperature: -20...+50°C
• Protection class: IP54

• Pressure measurement range: -250...2500 / -250...7000 Pa
• Input: 2 x  0...10 V, NTC10k, Pt1000, Ni1000, binary
• Output: Modbus RTU
• Temperature compensation in range of 0...50 °C
• Allowed overpressure: 25 kPa
• Supply: 24 VDC/VAC
• Operating temperature: -20...+50°C
• Protection class: IP54

Differential pressure transmitter with Modbus interface DPT-MOD-2000, DPT-MOD-3000 and DPT-MOD-5000 for usage in air and non-aggressive gasses.

Differential 8 range pressure transmitter DPT250, DPT2500 and DPT7000. Designed for usage in air and non-aggressive gasses.

• Pressure measurement range: from 0...1 bar to 0...6 bar
• Made to be used for air-conditioning, heating and water systems
• For neutral fluids and non-aggressive gases, compatible with refrigerants
• Output: 4...20 mA
• Supply: 24 VDC/VAC
• Operating temperature: -20...+80°C
• Protection class: IP65

• Input: differential pressure
• Typical areas of use are chemical industry and process engineering
• Measurement range: 75 mbar...70 bar
• Output: 4...20 mA HART
• Supply: 12...30 VDC
• Operating temperature: -40…+85 °C
• Protection class: IP65
• Process connection: 1/4-18NPT

• Pressure range: from 0...1 to 0...16 bar
• Output signal: 4 ... 20 mA (P1–P2)
• Process temperature: -25...+125 °C
• Process connection: G1/4" f
• Protection class: min. IP65

• PID controller
• Pressure measurement range: 0...2500 Pa / 0...7000 Pa
• Switchable between air flow and pressure measurement
• Output: 0...10 V / 4...20 mA
• Option: autozero function
• Allowed overpressure: 25 kPa
• Supply: 24 VDC
• Operating temperature: -20...+50°C
• Protection class: IP54

• PID controller
• Pressure measurement range: 0...2500 Pa
• Modbus RTU communication
• Control output: 0...10 V
• External input: 0...10 V / thermistor / binary
• LCD display
• Temperature compensation
• Allowed overpressure: 25 kPa
• Supply: 24 VDC
• Operating temperature: -20...+50°C
• Protection class: IP54

• Modern, simple and user-friendly service
• Communication interfaces: RS-485 Modbus Slave, Modbus TCP Slave and optionally Ethernet
• FTP server (available in controller versions with Ethernet interface)
• Selection of PID parameters for any unit
• For easy programming and devices configuration, LUMEL offers one common LPCon software
• Parameter logging on SD card

The FPI 8237 IO-Link Flush Membrane pressure transmitter impresses with an absolutely smooth and robust flush-mounted measuring diaphragm made of corrosion-resistant duplex steel 1.4462. Trafag’s proprietary thin-film-on-steel sensor technology ensures a wide temperature range and excellent long-term stability.

• Measuring range: -0,5...0,5 to 0...100 bar
• Output signal: IO-Link 1.1, COM3, min. process cycle time 1 ms, Smart Sensor Profile ED2, 2 Switching outputs PNP / NPN / Push-Pull configurable
• Accuracy at 25°C typically: ± 0.5 % FS typ.
• Measuring principle: Thin-film-on-steel
• Media temperature –10... +125 °C
• Ambient temperature: –10...+125 °C
• Protection class: IP65, IP67
• Applications: Hydraulics, Machine tools, Process technology, Food industry, Water treatment

The FPT 8236 pressure transmitter impresses with an absolutely smooth and robust flush-mounted measuring diaphragm made of corrosion-resistant duplex steel. Trafag’s proprietary thin-film-on-steel sensor technology ensures a wide temperature range and excellent long-term stability.

• Measuring range: 0.5...0.5 to 0...100 bar (-5...10 to 0...1500 psi)
• Output signal: 4...20 mA, 0...5 VDC, 1...6 VDC, 0...10 VDC, 0.5…4.5 VDC ratiometric
• Accuracy at 25°C typically: ± 0.5 % FS typ.
• Membrane in Duplex steel 1.4462
• Pressure connection: G1/2” male, flush membrane
• Media temperature –10... +125 °C
• Ambient temperature: –10...+125 °C
• Applications: Machine tools, Food Industry, Process technology, Water treatment, Hydraulics

• Pressure range: from 0...2,5 to 0...600 bar
• Output signal: 1 or 2 PNP transistors
• Process temperature: -40...+125 °C
• Process connection: G1/4" m, G1/4" m (Manometer), 1/4"NPT m, 1/8"NPT m, 7/16"-20UNF SAE J512 f, 7/16"-20UNF SAE4 m, 7/16"-20UNF m DIN3866, R1/4" m DIN3858, R1/4" m DIN2999, R1/8" m, M10x1 m, M12x1.5 m
• Protection class: IP65, IP67