Search

• FX-2000 is designed for moisture measurement of hay, straw, windrow and bales
• Moisture measurement range: 6...40 %
• Bright, clear digital display
• Can be used for on-the-go moisture monitoring or as a portable meter
• In continuous mode:
  • Takes two readings every second
  • Displays the average and highest of eight accumulated readings
  • Readings updated every 4 seconds
  • Built-in backlight
  • Connects to tractor power supply
• In portable mode:
  • Averages up to 100 accumulated readings
  • Displays average and highest of accumulated readings
• Built-in calibration check
• Audible, adjustable alarm
• Operating temperature: 0...50 °C
• Size: 200 x 80 x 40 mm
• Weight: 285 g
• Rugged construction ensures years of reliable use
• Optional sturdy plastic carrying case
• Supply: 9 V battery
• 3-year warranty

• SF6 gas density monitor for high voltage switchgear
• Three versions: 1 / 2 / 3 stages (8781 / 8782 / 8783)
• Measurement range: 0...1,1 MPa (mechanical), 0...0,85 MPa (electronic)
• Output signal: floating change-over contact (SPDT) / 6.5...20 mA current loop
• Switch point: factory calibrated
• Media temperature: -40...+80 °C
• Ambient temperature: -40...+80 °C
• Protection class: IP65

• Universal input for measuring temperature, resistance and standard signal
• 4 alarm outputs with signaling on LED diodes
• Digital output: RS-485 modbus (can be programmed through RS-485)
• Analog signal output: 0/4...20 mA or 0...10 V
• Two-line LCD display
• Mathematical functions for converting the measured value
• Protection grade: frontal side – IP65 / from terminal side – IP10
• Operating temperature: -25...23...55 °C

• Measurement of parameters: voltage, current, active, reactive and apparent power, cosφ, tgφ, frequency, active, reactive and apparent energy, active power 15 minutes, voltage 10 minutes
• Current and voltage harmonics analysis up to 51st (measurements available via RS-485)
• Programmable input:
  • Current: 0…1 / 0…5A
  • Voltage: 0…100V / 0…230V / 0…400V
• Output:
  • Analog: 0/4...20 mA or 0...10 V
  • Relays: 1 or 4
  • Binary (OC)
• Digital output: RS-485 modbus (can be programmed through RS-485)
• Two-line LCD display
• Pulse output to measure energy consumption
• 4 alarm outputs with signaling on LED diodes, working in 7 different modes
• Conversion of any measured value into an analog signal 0/4...20 mA or 0...10V
• Protection grade: frontal side – IP65 / from terminal side – IP10
• Operating temperature: -25...23...55 °C

N19Z meter measures AC voltage and current. The meter is designed to work in 3-phase networks or 1-phase networks.

• Nominal input voltage: 300 or 600 V 1 phase / 100…500 V 3 phase
• Nominal input current: 1A or 5A
• True RMS measurement (up to 15th Harmonic)
• On site programmable PT/CT ratios
• User selectable 3ph3wire or 3ph4wire Network (for 3ph)
• Onsite selection of Auto scroll / Fixed Screen (for 3ph)
• 4 Digits 14mm ultra bright LED Display
• Protection: IP54 front / IP20 back
• Parameter Screen recall: In case of power failure, the instrument memorizes the last displayed screen
• Accuracy: ±0.5% of nominal value

Indoor temperature meter / transducer Txx18, designed for temperature, humidity and barometric pressure measurement.

• SpotScan is a linear scanning add-on for RAYTEK, IRCON noncontact IR thermometers ENDURANCE, Marathon MM, Modline 5 and Modline 7

• SpotScan is designed to broaden the capabilities of noncontact IR thermometers while scanning measured surface linearly thus measuring wider than one dot target area

• Measurement range: -40...+150 °C, -1...60 bar
• Temperature measurement accuracy: ± 1,3 °C
• Pressure measurement accuracy: ±0,5 % of full scale
• Operating temperature: -20...+50 °C
• Overload: 65 bar
• Two valve system
• Android / iOS app for communication with the device (via Bluetooth Low Energy interface)
• 124 refrigerant gases

The device is designed to measure ambient air pollution by detecting concentration and distribution of particles.

Digital meters – bargraphs NA3, NA5, NA6,measurement of DC voltage, current, resistance and temperature measurement (with thermal sensors J, K, N, E, R, S, T, Pt100, Pt500, Pt1000).

Micro-manometer HP (differential, liquid) HP5, HP10, HP15.

Micro-manometer MG (differential, liquid) MG20, MG40, MG50, MG60, MG80, MG100.

Micro-manometer TJ (differential, liquid) TJ100, TJ150, TJ300, TJ600, TJ1000.

Micro-manometer TX (differential, liquid) TX25, TX50, TX75.

♦ Positive, negative and differential pressure measurement
♦ Air speed measurement
♦ Automatic zero find function
♦ Measured value hold
♦ Minimal and maximal value detection
♦ Measurement unit option

Micro-manometric fluid AWS10, for filling.

• Range: -250...2550 Pa
• Maximal overpressure: 30 kPa
• Accuracy: ±1,4 %
• Pressure and air flow measurements from air diffusers and valves
• Data can be uploaded on your computer for visualization and further analysis
• Over 700 programmed valve types
• Mediums: air and non-aggressive gases
• Operating temperature: -10... +50 °C
• Connection: ø 5 mm pressure hoses
• Can be used with Pitot tube
• 5 year warranty
• Included: calibration certificate, 2 x 2 m PVC hoses

The JX-30 features the Delmhorst EDGE™ App with expanded wood species, customizable settings, and the ability to share data from any location.

• Moister measurement range: 6…60% Wood (Douglas Fir)
• Large, custom display with auto backlight – easy to read under all conditions
• Species: 74 plus 123 additional available through EDGE™ App
• Wood temperature correction (°F/°C)
• Pins/electrode correction (insulated or non-insulated)
• Alarm set point: alerts to user-selected moister level
• On-screen statistics: High, Low, Average, Standard Deviation, View all readings
• Internal calibration check
• “Low Batt” warning with audio
• Auto off timer. Set to 1 min, 4 min or 10 min
• Integral contact pins max 5/16” penetration (use 2498/A-100)
• Compatible with any Delmhorst external electrode
• Color-coded LED’s: adjustable through EDGE ™app
• Power: 2x AA batteries – Alkaline Energizer (included)
• QR code on meter for easy access to support materials
• Size: meter only: 220 mm x 72mm x 39mm; in carry case - 241mm x 165mm x 64mm
• Weight with case: 510 g

• Paper moisture and temperature meter WCPT-100P, made by Tanel (Poland)
• Moisture range: 20...95 %RH; Ambient temperature: -5...+60 ºC

• Measured parameters (with respective sensors):
  a) Temperature (Pt100 or thermocouple)
  b) Humidity
  c) Air quality
  d) Air velocity
  e) Airflow
  f) Tachometry
• Two inputs for Pt100 temperature sensors (range -200...600 °C)
• Up to 6 measurements simultaneously
• Power supply: Lithium-Ion battery (up to 57 hours)
• Calibration certificate, additional battery, transport case included
• Operating temperature: 0...50 °C
• Protection class: IP54

• The innovative multiple sensing head interface, which can support up to 8 individually addressable heads per communication box
• reduces sensor cost, simplifies sensor installation and applications troubleshooting, and provides the lowest cost per measurement point

Infrared temperature meter KIRAY 100 with double measuring laser. Main tool for temperature measurement in remote and dangerous areas.

Infrared temperature meter KIRAY 200 with double measuring laser. Main tool for temperature measurement in remote and dangerous areas.

Noncontact infrared thermometer KIRAY 300 is designed to diagnose, inspect and check the surface temperature of measured objects. Up to 100 values can be stored in the internal memory.

• Real-time thermal line-scanner system for continuous or discrete process measurements
• Up to 1024 measurement points per line
• Fast scan rates up to 150 lines per second (real-time 150 Hz thermal imaging)
• Optical resolution up to 200:1
• Built-in line laser for rapid alignment
• On-board Ethernet TCP/IP communication
• PC independent alarm output
• PC independent 4...20 mA interfaces (3 outputs)
• Wide choice of models and spectral responses
• Rugged, waterproof IP65 enclosure
• Water cooling for ambient temperature up to 180 °C

• Noncontact infrared temperature meter 3i Plus (pyrometer), designed for metalworking industry where casting, hardening, heating take place. Also suitable for ceramics, semiconductor, chemical furnace temperature measurement
• It is a new generation, small size IR device for high temperature measurement
• Precise high-resolution optics guarantee high accuracy, resistant casing let the device survive falls from up to 1 meter height
• That said, measurements can be done in various environments and from various distances

• Noncontact stationary infrared temperature meter CM for temperature measurement
• Range: -20...500 °C
• Outputs: 0...5V, or TC K / J type (chosen while ordering)
• Software “DataTemp Multidrop” for remote monitoring and configuration

• Noncontact infrared thermal meter (pyrometer) ENDURANCE
• for temperature measurement up to 3200 ºC with the resolution of 0,1 ºC
• Outputs: Ethernet, profinet, 0/4...20mA (isolated), RS485, relay 48V and 300mA
• Web server
• Wider area can be measured when used with SpotScan

• Noncontact infrared thermal meter Marathon MM, wide range of accessories for various applications
• Range: -40...3000°C (in fixed ranges)
• Outputs: 0/4...20mA, RS485, mechanical switch

• Temperature measurement range: -40...+2250 °C (different versions)
• Advanced signal processing
• Wide choice of focus distances
• Durable stainless steel IP64 enclosures designed to withstand ambient temperatures from -20 to 85 °C
• Integrated laser sighting
• Galvanic isolated outputs
• Plastic lens option for food application
• Analog input for ambient compensation and adjusting emissivity setting
• USB for easy setup
• Simple, two-wire or digital installation
• Backward compatibility to old Raytek and Ircon in class sensors and accessories

• Noncontact infrared thermal meter Thermalert TX, additional accessories for various applications
• Can be used in an explosive area
• Range: -18...2000 °C (in fixed ranges)
• Outputs: 4...20mA, HART į RS232, mechanical switch (depends on version)

The oxygen concentration meter MF010-O-LC determines the oxygen content in gas mixtures up to a temperature of 250 °C.

• RDM-3P is designed for moisture measurement of paper
• Three scales:
  • 5,3...23 % for paper
  • 8...40 % for baled scrap paper
  • 0...100 % arbitrary scale for obtaining relative moisture indications on other material
• Bright, clear digital display
• Built-in calibration check
• Audible, adjustable alarm
• Integral contact pins mounted on top of meter provide 8 mm penetration
• Built-in connector accepts any Delmhorst electrode
• Auto-shut off timer saves battery life
• Store up to 1400 readings with date and time stamp
• View and organize stored readings on screen
• Optional software lets you download readings to your computes and generate Excel reports
• Operating temperature: -20...70 °C
• Size: 215 x 85 x 45 mm
• Weight: 312 g
• Rugged construction ensures years of reliable use
• Sturdy plastic carrying case
• Supply: 9 V battery
• 1-year warranty

Instrument PH135 is designed for liquid pH, ORP and temperature measurement.

• pH measuring range: -1.00/15.00 pH, accuracy 0.01 pH
• ORP measuring range: -1200/+1200 mV, accuracy 1 mV
• Temperature measuring ranges: -10.0/+110.0 °C ;  -14.0/+230.0 °F
• Alphanumeric LCD display
• Manual and automatic temperature compensation
• Manual or automatic calibration
• Automatic recognition of buffer solutions
• Data logging up to 100 measures
• Alcaline 9 V battery
• Dimensions: 92 x 155 x 33 mm  -  Weight:  approx. 300 g 

PoE (power over Ethernet) temperature, relative air humidity, atmospheric pressure meters T4611, T3611, T7611. Only to be used with external sensors.

Application:

• Storage rooms
• Greenhouses
• Telecommunication devices
• Servers
• A/C units

PoE (power over Ethernet) temperature, relative air humidity, atmospheric pressure meters T0610, T3610, T7610. Only to be used with internal sensors.

Application:

• Storage rooms
• Greenhouses
• Telecommunication devices
• Servers
• A/C units

• Oxygen concentration measuring in air and inert gas mixtures
• Specially developed for use in composting plants
• Measuring range of oxygen concentration: 0,1…25 % (0…100 % range on request)
• Value indicator of measured oxygen concentration
• Output: 4…20 mA analog or bidirectional digital signal (for calibration, operation diagnostic)
• Length and diameter of the sensor protection tube to the handle: 1200 x 30 mm
• Length of the protective tube part to be stuck in the compost heap: ~ 1000 mm
• Material of protective tube: Stainless steel 1.4301
• Housing ambient temperature: -10…+50 °C
• Probe ambient temperature: -10…+100 °C
• Protection class of housing electronic: IP65
• Protection class of probe: IP40
• Rechargeable battery with indication of voltage
• It is possible to connect the sensor to a stationary data processing system

• Portable analyzer NP40 is designed for power network quality parameter analysis
• Analyses voltage and current harmonics up to 51-st, THD
• Real-time waveform display (4 voltage / 4 current)
• Measurement of TRMS currents up to 3000 A (with standard sensor)
• Half cycle RMS measurement (voltage and current)
• Measurement in 1-phase and 3-phase systems (3- and 4-wire)
• Voltage, current, harmonics, power, energy and other parameter measurement
• Graphical representation of data in a waveform and vector diagram
• Record of events: dips, swells, overvoltages
• Built-in 8 GB memory card
• Ethernet interface for remote monitoring
• USB interface for data transfer
• Color 5,6” TFT display, 320 x 240 px

• Power factor controller for reactive power compensation
• Measures 73 power network parameters (40 visible on screen, all via Modbus RTU)
• Relay outputs: 4 / 6 / 8
• Programmable switch in time, switch off time and discharge time
• Alarm message and relay output
• Optional digital output: Modbus RTU (RS-485)
• Optional real time clock (RTC)
• LCD screen
• Operating temperature: -10...+60 °C
• Protection class (front): IP54

• Panel electromagnetic devices are designed to measure the angle between phase voltage and current in one-phase and three-phase circuits
• Measured value is represented in cosine (cos φ)

Power meters PA39. Panel power meters are designed to measure active and reactive power. Transducer signal is measured using magnetoelectricity. Can be used for 1 or 3-phase measurement. Special version available for two-way energy flow measurement. Tropical version is also available (TIII).

• Voltage range: 100 √3...690 V
• Current range: 1A (X/1A) or 5A (X/5A)
• Accuracy class: 1,5
• Consumed power: = <3,25 VA
• Protection class: Frnt panel IP52, terminal IP00
• Devices comform with EN61000-6-2, EN-61000-6-4 standards
• Temperature range: -10...23...+55 °C

• Measures and records power network parameters in single phase or three phase 3 and 4-wire symmetrical and asymmetrical systems
• 54 electrical network quality parameters
• Analysis of voltage and current harmonics (up to the 51-st)
• Color touchscreen: LCD TFT 3.5“, 320 x 240
• 2 configurable alarm outputs
• Analog output 0/4...20 mA and 2 x Pt100 inputs (optional)
• Digital output: RS-485 (MODBUS)
• Ethernet / Profinet 2.2
• Supply: 85...253 VAC / 90...300 VDC or 20...40 VAC / 20...60 VDC
• Battery backup RTC
• Dimensions: 96 x 96 x 77 mm

• Measures and records parameters in 3 and 4-wire, 3-phase, balanced or unbalanced power network
• Up to 500 electrical network quality parameters according to EN 50160, EN 61000-4-30, standards
• Measuring class A or A / S
• Support the IEC 60870-5-104 communication protocol (new - option)
• Analysis of voltage and current harmonics and interharmonics (up to the 51-st)
• Monitoring up to 6 additional energy meters with pulse output
• Recording of measurements before and after events (dips & swells)
• Configurable archives of logged values and events
• SD card support (up to 32 GB)
• Webserver function, FTP server, DHCP client
• Outputs: relays, binary, analog
• Binary inputs
• E-mail alarms
• Interfaces: RS-485 Modbus slave, Ethernet 100 Base-T (Modbus TCP server), USB device and host
• Color touchscreen: LCD TFT 5.6“
• Many data representation modes (i.e. digital display, analog, bar graph, vector diagram)
• IP65 protection class for front side
• Real time clock (RTC) synchronization with NPT time server
• Time synchronization via external GPS module - STR  receiver (new - option)

• Designed for direct or indirect measurement of 1-phase network parameters
• Measured values: U, I, f, P, Q, S, PF, tg fi, fi, Ep, Eq
• Direct measurements up to 63 A
• Universal input: 1/5 A 100/400 VAC or 32/63 A, 100/400 VAC
• Outputs: RS-485 (MODBUS interface), 1x relay + 1x analog or 2x relay
• OLED display
• Programmable current and voltage transformer ratios
• Programmable via buttons or free eCon software (through USB)
• Size: 53 x 110 x 60 mm

• Meter N27D is designed to measure parameters of the single-phase power network
• Direct measurements up to 63 A
• The device measures voltage, current, frequency and active power
• Measurements are represented in 4-digit display
• Button enables the scrolling through available measurements
• Mounted on standard 35 mm rail (LST-EN 62208)

• Power network parameter meter N14 is designed for measuring of three-phase network parameters and accounting of internal energy consumption. Can be used in 3- or 4-wire systems
• Can be used in energetic monitoring systems (RS-485 port)
• Active and reactive power measurement, active and reactive power counters, average power measurement
• Phase, current and voltage effective value measurement
• Network frequency measurement
• Average active power (over set time) measurement
• Changeable current and voltage transformer transfer coefficient values
• Operating temperature: -30...+50 °C
• Programmable switch output and RS-485 (MODBUS) port
• Pulse output for remote energy accounting
• Accuracy class: current, voltage 0,5/1,0; frequency 1,0; power 2,0; energy 1,0/2,0; tg φ 1,5

• Power network meter ND20 is designed to measure 3-phase network parameters and to account internal energy consumption
• Usable in 3- and 4-wire systems
• Can be used in energetic monitoring systems (RS-485 port)
• Front panel protection class IP65
• Harmonic, THD, watthour measurement
• 3,5” LCD indicator
• Analog output of 0/4...20 mA (additionally ordered)

• Measurement of power network parameters in 1-phase and 3-phase (3 or 4-wire) systems
• Current inputs 0,1 A and 0,25 A (for dedicated transformers)
• Quick and convenient ways to connect current transformers via RJ12 connector or screw terminals
• Designed for usage with following transformers: LJ12, LJ25, LJ35, LJ45, LJ306, LJ307, LJ308
• RS-485 (MODBUS RTU) interface
• THD factor measurement
• Backlighted LCD 3,5”
• Protection grade from the frontal side: IP65

• Power network parameter measurement in 1- and 3-phase network
• THD factor calculation
• High accuracy class
• Backlit LCD 3,5” display
• RS-485 Modbus slave interface
• Frontal protection class: IP65