Search

• Long-life metal-oxide gas sensor
• Range 0...100 % LEL H₂
• Resolution 0,1 % LEL H₂
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor options

• Stable long-life electrochemical gas sensor
• Range 0...100 / 0...1000 ppm H₂S
• Resolution 0,1 / 1 ppm H₂S
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 10 / 20 ppm H₂S

• Stable long-life electrochemical gas sensor
• Range 0...100 / 0...1000 ppm H₂S
• Resolution 0,1 / 1 ppm H₂S
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor option

• Electrochemical gas sensor
• Range: 0...100 / 0...2000 ppm H₂S
• Resolution: 0,1 / 1 ppm H₂S
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

LCC series laser edge detectors (laser copy counters) primarily are designed for detecting and counting magazines or single sheets in imbricated arrangement. Furthermore, these laser sensors are suitable for counting corrugated cardboard boxes, laminates, as well as for counting the number of folds of paper filters (air filters).

• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL (0...5 % vol) CH₄
• Resolution 0,1 % LEL (50 ppm) CH₄
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 20 / 50 % LEL CH₄

• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL CH₄
• Resolution 0,1 % LEL CH₄
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 20 / 50 % LEL CH₄
• Visual and acoustic alarms

• Stable long-life metal-oxide gas sensor
• Range 0...100 % LEL (0...5 % vol) CH₄
• Resolution 0,1 % LEL (50 ppm) CH₄
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor options

• Metal-oxide gas sensor
• Range: 0...100% LEL (0...5 %) CH₄
• Resolution: 0,1 % LEL (50 ppm) CH₄
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+70 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Electrochemical gas sensor
• Range: 0...250 ppm NO
• Resolution: 1 ppm NO
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -30...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Stable long-life electrochemical gas sensor
• Range 0...20 / 0...200 ppm NO₂
• Resolution 0,02 / 0,1 ppm NO₂
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 3 / 6 ppm NO₂

• Stable long-life electrochemical gas sensor
• Range 0...20 / 0...200 ppm NO₂
• Resolution 0,02 / 0,1 ppm NO₂
• Outputs 2 x 4...20 mA / 0...10 V, RS-485

• Electrochemical gas sensor
• Range:
• -- 0...20 ppm NO₂
• -- 0...200 ppm NO₂
• Resolution:
• -- 0,1 ppm NO₂ for 20 ppm range
• -- 1 ppm NO₂ for 200 ppm range
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -20...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Stable long-life electrochemical gas sensor
• Range 0...20 % vol O₂
• Resolution 0,01 % vol O₂
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 19,5 / 18 % vol O₂

• Stable long-life electrochemical gas sensor
• Range 0...20 % vol O₂
• Resolution 0,01 % vol O₂
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor options

• Electrochemical gas sensor
• Range: 0...25 % O₂
• Resolution: 0,01 % O₂
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -30...+50 °C
• Supply: 12...36 VDC, 24 VAC or 230 VAC

• Stable long-life electrochemical gas sensor
• Range 0...5 ppm O₃
• Resolution 0,03 % ppm O₃
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 0,3 / 1 ppm O₃
• Attached or remote sensor

• Stable long-life electrochemical gas sensor
• Range 0...5 ppm O₃
• Resolution 0,03 % ppm O₃
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor

• Electrochemical gas sensor
• Range: 0...5 ppm O₃
• Resolution: 0,01 ppm O₃
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+50 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• For R-12, R-123, R-125, R134a, R143, R-22, R404a, R-407c, R-410a, etc.
• Default calibration R-404a
• Range 0...1000 ppm
• Resolution 1 ppm
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485

• For R-12, R-123, R-125, R134a, R143, R-22, R404a, R-407c, R-410a, etc.
• Default calibration R-404a
• Long-life MOS sensor
• Range 0...1000 ppm
• Resolution 1 ppm
• Outputs 2 x 4...20 mA / 0...10 V, RS-485

• MOS gas sensor
• Detected gases: R-12, R-123, R-125, R-134a, R-143, R-22, R-404a, R-407c, R-410a, R1234yf, etc.
• Standard calibration: R-404a
• Range: 0...1000 ppm HFC
• Resolution: 1 ppm HFC
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -30...+60 °C
• Supply: 11..30 VDC / 24 VAC arba 90...265 VAC

• Relay output
• Smoke sensitivity complies with EN 54-7:2000+ A1:2002
• Digital signal processing
• Very low current consumption
• Excellent long-term stability
• LED indication
• Supply: 10...30 VDC
• Warranty: 3 years

• Stable long-life electrochemical cell
• Range 0...50 / 0...2000 ppm SO2
• Resolution < 0,1 / 1,5 ppm SO2
• Outputs 2 switches, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 2 / 5 ppm SO2
• Attached or remote sensor

• Stable long-life electrochemical cell
• Range 0...50 / 0...2000 ppm SO2
• Resolution 0,1 / 1,5 ppm SO2
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Attached or remote sensor

• Electrochemical gas sensor
• Range: 0...50 ppm SO₂ / 0...2000 ppm SO₂
• Resolution: 0,1 ppm SO₂ / 1,5 ppm SO₂
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -30...+50 °C
• Supply: 11..30 VDC / 24 VAC or 90...265

• For toluene, xylene, ethanol, etc.
• Default calibration toluene
• Stable long-life metal-oxide sensor
• Range 0...100 % LEL
• Resolution 3 ppm LEL
• Outputs 2 relays, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 20 % / 50 % LEL
• Remote probe option

• For toluene, xylene and ethanol
• Default calibration toluene
• Stable long-life metal-oxide sensor
• Range 0...100 % LEL
• Resolution 0,1 % LEL
• Outputs 2 relays with switch-over contacts
• Default alarm set-points 10 % / 25 % LEL
• Visual and acoustic alarms

• For toluene, xylene and ethanol
• Default calibration toluene
• Long-life metal-oxide sensor
• Range 0...100 % LEL (0...1 % vol) toluene
• Resolution 3 ppm toluene
• Outputs 2 relays, 2 x 4...20 mA / 0...10 V, RS-485
• Default alarm set-points 20 % / 50 % LEL
• Acoustic alarm

• For toluene, xylene, ethanol, etc.
• Default calibration toluene
• Long-life metal-oxide sensor
• Range 0...100 % LEL
• Resolution 3 ppm toluene
• Outputs 2 x 4...20 mA / 0...10 V, RS-485
• Remote probe option

• For toluene, xylene, ethanol and 2-propanol
• Default calibration toluene
• Stable long-life metal-oxide sensor
• Range: 0...100 % LEL or 0…500 ppm
• Resolution 0,1 % LEL or 1 ppm
• Outputs: 2 relays with switch-over contacts
• Acoustic and visual alarms

• Photo ionization detector
• Detected vapors: acetone, ethanol, toluene, xylene, etc.
• Standard calibration: isobutylene
• Range: 0...40 / 0...200 ppm (isobutylene)
• Resolution: 1 / 1 ppb
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+65 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Metal-oxide gas sensor
• Detected vapors: acetone, ethanol, toluene, xylene, etc.
• Standard calibration: toluene
• Range: 0...100 % LEL (flammable range) / 0...1000 ppm (toxic range)
• Resolution: 0,1 % LEL / 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+70 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

The TSF400-0 is a compact water-leak detector designed for early detection of water presence on floors, trays, or inside equipment enclosures. It operates from a wide 4.5–26 VDC supply and provides an N-channel open-drain output for direct connection to PLCs, controllers, alarm modules, or building-automation systems.

Applications:

Leak detection in server rooms, UPS rooms and telecom shelters
HVAC drip trays, cooling/condensation lines
Under-floor and raised-floor monitoring
Domestic and commercial flood-alert systems

Specifications:

Operating temperature range: 0...50 °C
Ingress protection: IP65
Cable length: 3 m

The LoRa-Log-Vape system, using LoRaWAN communication technology, is designed for detecting "vaping" and cigarette smoke. Sensors capture environmental parameters and, upon detecting an event, send a notification to the LoRaWAN receiver (gateway). The data is collected and processed in the receiver and can be viewed on a web page.

The LoRa-Log-Vape registration system consists of a wireless LoRaWAN sensor receiver and wireless Synetica “vape” sensors ENL-IAQ-Vape.

• Water leakage detector G2-LD detects leakage with active 1 meter cable
• Up to 2 leakage cables mountable
• Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
  • Modes: configurable C, T, or S (configurable)
  • AES-128 encryption mode 5, profile A
• Transmission interval: configurable 60 s…1 hour
• Operating temperature: -30…+85 °C (recommended +5…+50 °C) (None condensing)
• Warnings about low battery, case opened or removed from wall (opt.), leakage detected (red LED)
• Power supply: ER14505 3.6 V Li-SOCI2 battery
  • Battery lifetime up to 14 years, depends on configuration and operating temperature

Sensor SKU: 5905309601369 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Sensor detects change of state (open / close) with reed switch
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -35…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327691 (IP30) – plastic magnetic detector

Sensor SKU: 5906660327707 (IP30) – metal magnetic detector

Sensor SKU: 5905309600768 (IP67) – metal magnetic detector

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Sensor detects change of state (open / close) with reed switch
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection (IP67 on request)

Sensor SKU: 5905309601659 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Device can be used to detect every single movement (act as a regular motion sensor used in alarm systems) or count the number of detected movements in the set time periods in order to detect the room occupancy
• Detection distance: 12 m
• Field of view: 40° x 105°
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -35…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327950 (IP30)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud** platform or any other third party systems.

• Device can be used to detect every single movement (act as a regular motion sensor used in alarm systems) or count the number of detected movements in the set time periods in order to detect the room occupancy
• Detection distance: 12 m
• Field of view: 40° x 105°
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection

**- for every sensor / device license is needed to use Efento cloud service

More about PIR motion / occupancy detector on Efento website [EN]

PIR motion / occupancy detector 5906660327950 datasheet [EN]

Sensor SKU: 5905309601352 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Sensor detects the presence of conductive liquid (e.g. water) at any point along the entire length of the cable
• Probe maximum working temperature: 70 °C
• Probe length: 3 m (different probe length on request)
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -35…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327684 (IP30)

Sensor SKU: 5905309600348 (IP67)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Sensor detects the presence of conductive liquid (e.g. water) at any point along the entire length of the cable
• Probe maximum working temperature: 70 °C
• Probe length: 3 m (different probe length on request)
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection (IP67 on request)

Sensor SKU: 5905309601345 (IP30)

Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.

• Detection of the presence of a conductive fluid (e.g. water) on the level at which the probe is mounted
• Probe length: 3 m
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -35…+70 °C / 0…99 %
• Case IP30 protection

Sensor SKU: 5906660327677 (IP30)

Sensor SKU: 5905309600645 (IP67)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud platform or any other third party systems.

• Detection of the presence of a conductive fluid (e.g. water) on the level at which the probe is mounted
• Probe length: 3 m
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -15…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection (IP67 on request)