Your shopping cart is empty!
Adding preset counter Type 886.
- Display 3- or 5-digit, 4mm
- Protection class IP30
Contactless counter Colibri 490. With a magnetic drive, activates when a magnet or piece of iron move nearby.
- Display 6-digit, 4mm
- Protection class IP66
Counter ALC77-B for linear and rotary encoders (batch).
Technical specifications
- 10 kHz input frequency
- Encoder input (A and B signals)
- 7-digit LED screen
- Range -999...9999
- 2 programmable set points (SPs)
- 2 switch outputs
- Protection class IP65
- Supply 24 VAC/VDC or 230 VAC
- Sensor supply 5 VDC or 12 VDC
- Size 72 x 72 mm
Counter ALC77-C for linear and rotary encoders (up/down).
Technical specifications
- 600 kHz input frequency
- Encoder input (A and B signals)
- 7-digit LED screen
- Range -999...9999
- 2 programmable set points (SPs)
- 2 switch outputs + RS-232
- Protection class IP65
- Supply 24 VAC/VDC or 230 VAC
- Sensor supply 5 VDC or 12 VDC
- Size 72 x 72 mm
Counter ALC77-T for linear and rotary encoders (for tachometers).
Technical specifications
- 5 kHz input frequency
- Encoder input (A and B signals)
- 7-digit LED screen
- Range -999...9999
- 2 programmable set points (SPs)
- 2 switch outputs
- Protection class IP65
- Supply 24 VAC/VDC or 230 VAC
- Sensor supply 5 VDC or 12 VDC
- Size 72 x 72 mm
Counter ALC94UNI for linear and rotary encoders (up/down), universal.
Technical specifications
- 600 kHz input frequency
- Encoder input
- 6-digit LED screen
- Range -99999...999999
- 2 programmable set points (SPs)
- 2 switch outputs OR RS-232
- Protection class IP65
- Supply 24 VAC/VDC or 230 VAC
- Sensor supply 5 VDC or 12 VDC
- Size 96 x 48 mm
- Digital pulse counter - tachometer ECH4400
- Count inputs: 2 channels (max 50 kHz, 5…30 V pulses), can be selected as PNP or NPN input
- Counting frequency: (20, 50, 100, 500, 1000, 5000) Hz, (10, 20, 30, 40) kHz
- Control outputs: 2 relay NO / NC 250 V, 2 A
- SSR outputs: Open collector output (Max.: 30 VDC, 50 mA)
- RS485 Modbus communication interface (custom ordered)
- Power supply: 90…250 V AC; 10…30 V DC; 8…24 V AC (custom ordered)
- Auxiliary supply output: 12 VDC, max 50 mA
- Ambient temperature: 0…+50 °C
- Case protection: front panel IP65, rear panel IP20
LCC series laser edge detectors (laser copy counters) primarily are designed for detecting and counting magazines or single sheets in imbricated arrangement. Furthermore, these laser sensors are suitable for counting corrugated cardboard boxes, laminates, as well as for counting the number of folds of paper filters (air filters).
The enLink Status-P transmits data using long range LoRa wireless which easily integrates with cloud services or on-site Systems.
- 3 channels pulse counter (S0 standard) and monitor of state (open / closed)
- With the transmit on Change of State enabled the unit operates as a standard pulse counter and also transmits a message when the state of the input changes from closed to open or open to closed
- The pulse counts for each channel are written to memory every 5 – 10 minutes
- Communication: LoRaWAN; frequency range: 863-870 MHz; up to 16 km range
- Measurement sending interval: 30 s to 3 hours or adaptive (triggered by change of state)
- 2 x Li-SOCl2 (3.6V) AA sized batteries ensure 3+ years of operation
- Configuration via USB cable / downlink
- Case IP40 protection (IP 67 on request)
- Display: LCD 6-digit, 9 mm; LED 6-digit, 7,6 mm
- Sampling frequency: 5 kHz / 30 Hz
- Display: LCD, 2-row (1 row 9.3mm / 2 row: 7,2 mm)
- Sampling frequency: Up to 60 kHz
Programmable pulse counter P30O, designed to convert frequency, pulse, input period, time and revolution speed signals into standard voltage or current signals. The device is programmed via PC (RS-485 interface) or with buttons.
Main properties:
- 2 universal pulse inputs
- Mathematical functions for every input
- Individual output characteristic (up to 21 point)
- Option – internal transducer supply source 24 VDC, 30 mA
- RS-485 interface (protocols Modbus RTU Slave, Modbus TCP Slave)
- Data logging function (internal 4 MB memory or SD/SDHC card (up to 8 GB))
- Digital input: 4 ch. pulse
- Independent modes: OPEN / CLOSED (“Dry contact”) and COUNTER (S0 standard)
- Output: RS-485 MODBUS RTU interface
- Non-volatile memory for counters storage and settings
- Galvanically isolated inputs
- DIN rail mounting
- Protection class: IP40 (connections IP20)
- Operating temperature range: -20…+60 °C
- Power supply: 5…28 VDC
- Display: LCD 8 digits, 7 mm; LED 6 digits, 7 mm.
- Calculation frequency: Min. 30 Hz / 20 Hz (type 3), max. 7,5 kHz
Totalizing counter Type 634 – “MINI I”.
- Display 6 or 7 digit, 4mm
- Protection class IP65
Designed to monitor electrical, gas, and water meters, as well as other measurement devices that have a dry contact pulse output feature. This device, belonging to the PRO sensor series, includes Aranet Sub-GHz ISM band radio which wirelessly transmits sensor measurements to the Aranet PRO base station.
- Maximum pulse frequency: 25 Hz
- Minimum pulse width: 10 ms
- Minimum interval between pulses: 30 ms
- Operational range (in line-of-sight): up to 3 km
- Data transmission: 1, 2, 5, 10 min
- Data encryption
- Supply: 1 x AA battery
- Battery lifetime (20 °C): up to 10 years
- Operating temperature: -40...+60 °C
- Protection class: IP67
- G2-P pulse counter converts wired consumption meter into a wireless meter
- Types of devices: water, electricity, HCA, room sensor devices, etc.
- Communication: wM-BUS EN 13757-3/4:2013, complies OMS 4.0.2
- Modes: configurable C, T, or S
- AES-128 encryption mode 5, profile A
- Value format: 0,001...10000 / pulse (configurable). Unconverted dimensionless value
- The total number of pulses is sent periodically
- It is possible to count pulses from two devices simultaneously
- Pulses from the electricity meter LEDs can also be counted using an optical probe (only one optical probe can be mounted)
- Transmission interval: configurable 60 s…1 hour
- Tamper protection
- Operating temperature: -30…+85 °C none condensing (recommended +5…+50 °C)
- Power supply: AA battery 3.6 V Li-SOCI2
- Battery lifetime up to 14 years, depends on configuration and operating temperature
Sensor SKU: 5905309601383 (IP30)
Efento BLE sensors transmit the data over BLE (Bluetooth Low Energy) and send data to the Efento cloud** through Efento gateway or to other third-party integration. Free mobile application let to configure the device and read the data from its memory.
- 3 channels pulse counter (more / less channels on request)
- Supported counters: NO (Pull-up 3.6V)
- Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
- Battery ensures up to 5 years of maintenance-free operation (15 min. measurement interval), 2700 mAh, 3,6 V, AA battery (replaceable)
- The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
- The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
- Possibility to integrate sensor to other third-party systems
- Operating temperature / humidity: -35…+70 °C / 0…99 %
- Case IP30 protection
Sensor SKU: 5906660327721 (IP30)
Sensor SKU: 5905309600676 (IP67)
Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud** platform or any other third party systems.
- 3 channels pulse counter (more / less channels on request)
- Supported counters: NO (Pull-up 3.6V)
- Communication NB-IoT bands: default B8 and B20 (others on request)
- Measurement period: 1 minutes to 18 hours (configurable by the user)
- Measurement sending interval: 5 minutes to 7 days (configurable by the user)
- Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
- The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
- Sensor's configuration can be changed remotely from the cloud or with a mobile application over Bluetooth Low Energy
- Operating temperature: -35…+70 °C
- Case IP30 protection (IP67 on request)