Search

• For methane, LPG, hydrogen and acetylene
• Can be calibrated for methane, butane, propane, acetylene and hydrogen
• Stable long-life metal-oxide gas sensor
• Range: 0...100 % LEL
• Resolution: 0,1 % LEL
• Outputs 2 x relays with switch-over contacts
• Default alarms set-points 10 / 25 % LEL
• UART digital interface
• Alarms: blinking LED, 85 dB buzzer

• Metal-oxide gas sensor
• Detected gases: hydrogen, methane, acetylene, propane, butane
• Standard calibration: methane
• Range: 0...100 % LEL
• Resolution: 0,1 % LEL
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST) / LCD indicator
• Option: remote sensor (default cable length is 3 m)
• Operating temperature: -40...+70 °C
• Supply: 11...30 VDC / 24 VAC or 90...265 VAC

• Applications of flue gas analyzer Si-Ca 130: boilers, burners, water heaters and furnaces
• Detectable gases: O₂, CO, CO(H₂), CO₂, NO, Low NO, NOx, Low NOx
• Up to three gas sensors
• CO measurement up to 8000 ppm
• Other measurement parameters: flue temp., air temp., differential temp., pressure / draft, excess air, combustion efficiency, combustion efficiency (condensation), stack gas velocity
• Color graphical touchscreen for control
• Communication: USB, Bluetooth (mobile App), remote printer
• Measurement storage: 2000 data points + smartphone and PC
• Predictive maintenance with estimated sensor life and calibration reminders
• Protection class: IP42
• Power supply: Rechargeable battery, Li-Ion 5100 mA/h 3.6 V (8 hours working time)
• Operating temperature: -5…+45 °C
• Sensor protection by pump stopping

• Designed for the remote monitoring of measurements in industrial, domestic and environmental maintenance applications
• Typical applications include oil separator alarms, tank surface level measurements, monitoring pumping stations and real estate, and surface and groundwater measurements
• The device sends alarms and measurement results as text messages either directly to GSM phone or to the LabkoNet server
• Settings can be easily modified with a GSM phone
• Analog inputs: 4 units 4...20 mA (passive or active)
• Digital inputs: 4 units
• Relay outputs: 2 units
• Communication: SMS, GPRS
• Operating temperature: -20...+50 °C
• Supply: 230 VAC / 12 VDC battery
• Protection class: IP65

• Warning- and Sensor-Board WSB for digital and analog sensor technology for the precise detection of combustible, toxic and refrigerant gases.
• Versatile alarm function: Alarm and fault relays (30 V)
• Intelligent interfaces: RS-485 interface with DGC or Modbus protocol
• Precise signal transmission: 4–20 mA input and output for reliable communication
• Flexible: Connection of up to 3 sensors (2 digital)

Compact sensor VA 525 for measuring compressed air or nitrogen inline.

• 4...20 mA and pulse or a Modbus RTU (RS 485) interface as standard
• Optional interfaces such as Modbus TCP (Ethernet), PoE, M-Bus available
• Pressure range up to 16 bar
• Temperature range up to 60°C
• For speeds up to 224 Nm/s
• Integrated display to show the measured values
• Available from 1/4" to 2''
• Settings adjustable via the keys of the display
• Main counter can be reset via the display

• To measure and data logging: carbon dioxide (0...5000 ppm), temperature (0...50 °C), atmospheric pressure (800...1100 hPa), humidity (0…100 % RH) in air and neutral gases
• Free software for configuration and data visualization
• Bluetooth communication for smartphones and tablets (Android and IOS)
• Safety lock magnetic mounting with inviolability system holder (accessories)
• Compatible with food industry environment
• Up to 4 recordable parameters simultaneously
• Optional calibration certificate

Electric heating elements of various shapes according to client’s requests.

Electrical drum heaters, belt type 0...120 °C, 130 °C. Designed to increase solubility and decrease viscosity in products which require higher energy than standard heaters can achieve. Belt heaters are available in standard sizes or can be made according to client’s demand. Can be used with barrel heating pads. For even faster heating, isolating coatings can be used (11-9862), 200 L.

• Thermostat range 0...200 °C
• Digital thermostat
• Warm-up time - 24 hours (P = 1200W; 200 L; from 15 to 80 °C)
• Coating material silicone/glass fiber
• Glass fiber cap
• Spring heating element with silicone insulation
• Regulated clamp buckles
• 3 meter supply cable
• Protection class: IP40

• Thermostat ranges 0-40°C or 0-90°C
• Digital thermostat
• Standard variants for 25, 50, 105 and 200 liter capacity barrels
• Blanket is made from polyester/teflon
• Sewn heating insulation
• Damage-resistant spring heating element
• Regulated, easily removed buckles
• 3 m supply cable
• Protection class IP40
• Can be used with electrical heating pad for barrels

The ATEX Gas Bottle Heater series is a safe, efficient, and customizable heating solution for gas bottles located in hazardous areas.

• Nominal voltage: 230 VAC*
• Nominal power: 380W, 850W, 850W (10L, 50L, 79L) or application-specific
• Max. operating temperature: +50/60°C (jacket max. 200°C)
• Temperature class: T6, T5, T4, T3 (depending on temperature setting limiter)
• Electrical connection terminal boxes for network (EX-e) / sensor (EX-i)
• Protection class: IP65/I
• Zones 1/2 (gas); 21/22 (dust)
• Sensors: 2xPt100 (EX-i, EX-e)
• Weight: 6kg, 9.5kg, 10kg (10L, 50L, 79L)

These jacket heaters enable the comfortable and effective way to heat up IBC containers and other tanks. Low energy losses, even heat distribution. Can be used for various products: water, oils, diesel fuel, resin, Vaseline, wax, lanolin, fats, butters, Ghee, glue and adhesive. Can be used with insulation lid.

• 1, 2, or 3 thermostats adjustable from 0…+90 °C
• Teflon coated Polyester Material
• Standard size IBC 1000L (4400 x 1000 mm)
• Durable, lightweight design with quick release buckles
• 3 m connection cable
• Protection class IP40 (Optional IP54)
• Warm-up duration approx. 48h (1000L drum with water starting from +15º C to +50º C with 2x1000 W heaters and isolation lid)
• Warm-up duration approx. 48h (1000L drum with water starting from +15º C to +70º C with 3x1000 W heaters and isolation lid)

Utilizing unique dual-sensing technology, the device combines electromagnetic induction with an integrated ultrasonic sensor to provide highly accurate detection of both liquid level and flow velocity. Specifically optimized for partially filled pipes, open channels, and gravity-fed systems, the unit achieves an outstanding accuracy of ±1–2% of the actual flow rate.

• Internal pipe diameter: DN80…DN600
• Flow velocity (min. / max.): 0,46…7,5 m/s
• Accuracy: ± 1…2 % of actual flow (depends on flow profile and level detection)
• Process Temperature: 0…+70 °C
• Coating materials: hard rubber
• Maximum working pressure: No pressure (gravity flow) or 10 bar if pipe is full
• Output signal: 2× pulse / flow switch (max. 400 Hz), 4 ... 20 mA, 1× RS485 interface (Modbus / M-Bus protocol), M-Bus, HART, Ethernet module (TCP/IP, integrated web server)
• An optional IoT module allows measured values to be transmitted wirelessly via NB-IoT to the cloud
• Data archiving on a micro-SD card
• Process connections: flange
• Maximum ambient temperature: 55 °C
• Power supply: 24 V AC / DC, 230 V AC
• Protection class: IP68 for sensor, IP65-IP68 for transmitter

FLOW 55 datasheet [EN]

FLOW 38 MID version with certification, allowing the flow meter to be used for utility metering. FLOW 38 MID is certified for use with drinking water. The FLOW 38 MID electromagnetic flow rate meter is a precise measuring device designed to measure the flow of electrically conductive liquids.  The electronic unit (display) can be connected directly to the body (rotatable up to 350° for convenient viewing). Various process connection versions are available. A wide selection of materials for the internal surfaces in contact with the process medium allows the device to be adapted to various liquids.

• Internal pipe diameter: DN10…DN400
• Flow velocity (min./max.): 0,1…12 m/s (R40, R50)
• Accuracy: 0.2% in the 1:100 range, 0.5% in the 1:200 range
• Maximum medium temperature depending on the inner coating: 150 ℃
• Coating materials: rubber, teflon, ceramic
• Maximum working pressure: up to 16 bar
• Output signal: pulse, 4-20 mA, RS485 (Modbus RTU/ M-bus)
• An optional IoT module allows measured values to be transmitted wirelessly via NB-IoT to the cloud
• Process connections: Flange, Thread
• Maximum ambient temperature: 50 °C
• Power supply: 24 VAC/VDC, 110... 230 VAC
• Protection class: IP65, IP67, IP68

The FLOW45 electromagnetic flowmeter is equipped with a lithium battery, so it does not require an external power supply. The device has high accuracy in terms of full flow rate. Before each measurement, automatic diagnostics of all functions and parts necessary for proper measurement are performed. The device has a built-in empty pipe test and if there is no full flow, it will invalidate the entire measurement, as well as assess the flow direction and record the appropriate data.

• Internal pipe diameter: DN10…DN200
• Flow velocity (min. / max.), bidirectional: 0,2…12 m/s (1/60)
• Accuracy: 1 % for 1…10 m/s
• Maximum medium temperature depending on the inner coating: 150 ℃
• Coating materials: rubber (hard, soft, drinking water certified), Teflon, ceramic, Rilsan
• Maximum working pressure: up to 100 bar
• Output signal: pulse, RS485
• GSM data transmission module
• Data archiving on a micro SD card
• Process connections: flange, thread, sandwich, food grade
• Maximum ambient temperature: 5…55 °C
• Power supply: replaceable lithium battery (last up to 5 years) / external (12 V DC, max. 500 mA)
• Protection class: IP65, IP67, IP68

• Measurement distance: 0,5…2 m
• Accuracy: ± 0,5 °C
• Measurement speed: 0,7…2 m
• Software: DERMALOG Fever Detection (PC required)
• Interface: USB 3.0
• SDK: .Net / C / C++ / (Java coming soon)

• Measurement speed: 0,6 s (up to 700 people per hour)
• Integrated sensors: 5
• IR thermal array, range: 0...100 °C (± 0,3 °C)
• Room temperature sensor, range: -40...+85 °C (± 0,5 °C)
• Relative humidity sensor, range: 0...100 % (± 3 %)
• Vibration sensor (for sabotage detection), range: 0,25...5 G
• Distance sensor, resolution: 1 mm
• Dew point calculation
• Relay inputs: 2
• Relay outputs: 2
• LED indication, buzzer (85 dB)
• Communication: Ethernet (10/100)
• Connector (RJ45) for connection of other Kentix devices
• Webserver
• Software: remote connection with AlarmManager-PRO
• E-mail, SNMP alarms, Rest API
• SD card slot (to save pictures, card up to 128 GB)
• PoE
• Optional: RFID reader
• Optional: wall bracket, cable

Multifunctional indoor climate sensor AERASGARD RFTM - LQ - PS - CO2 - Modbus with with LCD display.

• Temperature measuring range / deviation: 0…+50 °C / ± 0,2 °C at +25 °C
• Humidity measuring range / deviation: 0…100 % RH / ± 2 % RH (20…80 % RH), at 25 °C, otherwise ± 3 %
• CO2 Measuring range / accuracy: 0…5000 ppm / ± 30 ppm ± 3 % of measured value
• Particulate matter (PM) measuring range / accuracy: 0…50 μg/m³ 0…100 μg/m³ 0…300 μg/m³ 0…500 μg/m³
• Particulate matter (PM) accuracy ± 10 μg/m3 (± 10 % of measured value) at PM 2.5, ± 25 μg/m3 (± 25 % of measured value) at PM 10
• Air quality (VOC) measuring range: 0…100 %
• Data output:  galvanically separated RS-485 Modbus RTU interface
• Variants: with / without LCD display
• One sensor covers about 30 m² of room area
• Power supply: 24 V ac/dc (200 mA)
• Standards: CE, EN 61 326, EMC Directive 2014/ 30/ EU, 2014/ 35/ EU

• Suitable for ATEX Zones 2 and 22
• Stable long-life photoacoustic or optical NDIR sensor
• Range: 0...10 000 ppm / 0...40 000 ppm / 0...5 % vol (0...100 % on request)
• Resolution: 1 ppm / 10 ppm / 0.01 % vol. CO2
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -40...+60 °C; 0….100 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Stable long-life electrochemical sensor
• Range: 0...300 or 0...1000 ppm
• Resolution: 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -20...+50 °C; 0….90 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Detected gases: hydrogen, methane, acetylene, propane, butane
• Default calibration: methane CH4
• Stable long-life metal-oxide / pellistor sensor
• Range: 0...100% LEL
• Resolution: 0,1 / 1 % LEL
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -40...+70 °C; ≤ 95 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

• Suitable for ATEX Zones 2 and 22
• Detectable gases: R-12, R-123, R-125, R-134a, R-143, R-22, R-404a, R-407c, R-410a, R-507, R-514a, R-1234ze and similar
• Stable long-life metal-oxide sensor
• Range: 0…1000 / 0…2500 ppm
• Resolution: 1 ppm
• Analog output: 2 x 4...20 mA / 0...10 V (user-settable)
• Digital output: RS-485 (Modbus RTU protocol)
• Option: relay output (2 x SPST)
• Operating temperature: -30...+60 °C; < 95 % RH; 0,9…1,1 atm.
• Supply: 12...36 VDC (default), 24 VAC or 230 VAC

Thermal mass flow sensor for compressed air and gases VA 500

• 4...20 mA, pulse and a Modbus RTU (RS 485) interface as standard
• Optional: Interfaces such as Modbus TCP (Ethernet), PoE, M-Bus
• Optional: Bi-directional measurement
• Pressure tight up to 50 bar
• Temperature range up to 110 °C
• Protection class IP65
• Suitable for gas velocities up to 224 Nm/s
• Integrated display for showing the measured values
• Can be used from 1/2" up to 40", larger diameters on request
• Easy installation under pressure
• Settings can be changed via the display
• Main counter reading can be reset via the display

• Applications of flue gas analyzer Si-Ca 130: for commercial and residential boilers and water heaters
• Detectable gases: O₂, CO, CO₂, NO, NOx
• Up to three gas sensors
• CO measurement up to 8000 ppm
• Other measurement parameters: flue temp., air temp., differential temp., pressure / draft, excess air, combustion efficiency, combustion efficiency (condensation)
• Color display screen with buttons
• Communication: Bluetooth (mobile App), remote printer
• Measurement storage: smartphone
• Predictive maintenance with estimated sensor life and calibration reminders
• Protection class: IP42
• Power supply: Rechargeable battery, Li-Ion 5100 mA/h 3.6 V (8 hours working time)
• Operating temperature: -5…+45 °C
• Sensor protection by pump stopping

The FPI 8237 IO-Link Flush Membrane pressure transmitter impresses with an absolutely smooth and robust flush-mounted measuring diaphragm made of corrosion-resistant duplex steel 1.4462. Trafag’s proprietary thin-film-on-steel sensor technology ensures a wide temperature range and excellent long-term stability.

• Measuring range: -0,5...0,5 to 0...100 bar
• Output signal: IO-Link 1.1, COM3, min. process cycle time 1 ms, Smart Sensor Profile ED2, 2 Switching outputs PNP / NPN / Push-Pull configurable
• Accuracy at 25°C typically: ± 0.5 % FS typ.
• Measuring principle: Thin-film-on-steel
• Media temperature –10... +125 °C
• Ambient temperature: –10...+125 °C
• Protection class: IP65, IP67
• Applications: Hydraulics, Machine tools, Process technology, Food industry, Water treatment

The FPT 8236 pressure transmitter impresses with an absolutely smooth and robust flush-mounted measuring diaphragm made of corrosion-resistant duplex steel. Trafag’s proprietary thin-film-on-steel sensor technology ensures a wide temperature range and excellent long-term stability.

• Measuring range: 0.5...0.5 to 0...100 bar (-5...10 to 0...1500 psi)
• Output signal: 4...20 mA, 0...5 VDC, 1...6 VDC, 0...10 VDC, 0.5…4.5 VDC ratiometric
• Accuracy at 25°C typically: ± 0.5 % FS typ.
• Membrane in Duplex steel 1.4462
• Pressure connection: G1/2” male, flush membrane
• Media temperature –10... +125 °C
• Ambient temperature: –10...+125 °C
• Applications: Machine tools, Food Industry, Process technology, Water treatment, Hydraulics

The frame light barriers of FLB Series are used for the measurement of smallest unguided parts.

• Gas measuring, monitoring and warning controller (Multi-Sensor-Controller MSC) for reliable detection of combustible, toxic and refrigerant gases
• Flexible control: 3 relays (SPDT, potential-free, 250 V)
• Intelligent Communication: RS-485 interface with DGC and Modbus protocol
• Precise signal transmission: 4–20 mA input and output for seamless system integration, up to 3 sensors including remote

SKU: 5905309602212

• Efento Gateway automatically transfers gathered data from Efento BLE (Bluetooth Low Energy) sensors to Efento Cloud or any other IoT platform over 4G LTE
• Gateway stores 500,000 measurements in its buffer memory in case the connection to Efento Cloud is lost, it will send the measurements right after connection is restored
• If Gateway used without Efento cloud it can store sensors data in its memory
• In local mode you can check the current and historical measurements (table/chart) and export the data in a form of CSV report
• Gateway communicates with sensors wirelessly over BLE. The maximum distance between Gateway and sensor is 100 m in the open space and 20 – 30 m in the buildings
• One gateway supports up to 128 Efento sensors
• Gateway can be integrated with any cloud platform or software that supports HTTP protocol (REST API)
• Setup takes under 5 minutes and can be completed using a smartphone with a free mobile app
• SIM card slot for LTE Cat 1 connection
• Power supply: 5 V, 1 A (USB-C)
• Backup battery: LI-Po, 1900 mAh (up to 12 hours backup power)
• Operating temperature: 0…+40 °C

SKU: 5906660327066

• Efento Gateway automatically transfers gathered data from Efento BLE (Bluetooth Low Energy) sensors to Efento Cloud or any other IoT platform
• Gateway stores 500,000 measurements in its buffer memory in case the connection to Efento Cloud is lost, it will send the measurements right after connection is restored
• If Gateway used without Efento cloud it can store sensors data in its memory
• In local mode you can check the current and historical measurements (table/chart) and export the data in a form of CSV report
• Gateway communicates with sensors wirelessly over BLE. The maximum distance between Gateway and sensor is 100 m in the open space and 20 – 30 m in the buildings
• One gateway supports up to 128 Efento sensors
• Gateway can be integrated with any cloud platform or software that supports HTTP protocol (REST API)
• Configuration of Efento Gateway using any internet browser over LAN
• Ethernet connection for data transfer
• Power supply: 5 V, 1 A (mini USB)
• Operating temperature: 0…+40 °C

• G-7 is designed for moisture measurement of grain
• Moisture measurement range: 9...30 %, depends on grain type
• Built-in calibrations for barley, coffee, corn, flax, hay, oats, pasta, rapeseed, rough rice, rye, sorghum, soybeans and wheat
• Built-in temperature correction over the range of 0...70 °C
• Programmable offset to match elevator
• Stores up to 150 accumulated readings in user-defined batches by grain
• Displays the average and highest readings, standard deviation, co-efficient of variance oh stored readings
• Built-in connector accepts any Delmhorst electrode
• Built-in calibration check
• Audible, adjustable alarm
• Size: 180 x 150 x 140 mm
• Weight: 1800 g
• Rugged construction ensures years of reliable use
• Supply: 9 V battery
• 1-year warranty

• GA-1 is designed for grease detection in separators, basins and tanks
• Easy to install, does not need calibration
• Switch output
• Remote monitoring capability
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

• GA-2 is designed for grease detection in separators, basins and tanks
• Two sensors – one is for grease detection, other – for blockage control
• Easy to install, does not need calibration
• 2 switch outputs
• Remote monitoring capability
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

Kuhlmann Ground Thawing Blankets are durable and weatherproof, designed to thaw frozen ground and soil, pipes, and protect equipment from freezing. They also work as curing blankets for various construction purposes.

Technical specifications:

• Durable PVC materials.
• Fixed temperature (70°C).
• 2-meter power cable.
• Special sizes produced upon request.
• IP67 Class.
• In normal conditions the mat thaws up to 30 cm of soil in 24 hours - or up to 60 cm in more sandy soil/ground.

• CO2 concentration measurement range: 0...5000 ppm
• Memory: up to 500,000 values in non-cyclic mode and 350 000 in cyclic mode
• Logging interval: 1 s...24 h
• Internal sensor
• GSM modem (GPRS)
• SMS and JSON messages can be sent via GPRS data connection
• Messages can be sent on alarms and periodically
• Data can be transferred to PC via USB-C interface
• Calibration certificate of manufacturer included
• Ambient temperature: -20...+60 °C
• Supply: 5200 mAh LiIon battery
• Protection class: IP20
• Warranty: 3 years

A simple handheld, accurate vape particulate, vape smoke detector FD-VAPE-HAND that indicates air quality for home, work, vehicles, or other occupational spaces. Excellent to detect vape, cigarette smoke, and e-cig smoke.

• Sensor: Laser scattering PM1.0, PM2.5, PM10 sensor
• Detection Range: 0-1000 µg/m3
• Response Time: <10 seconds
• Temperature measurement range: 0…50 °C (can be selected between Fahrenheit and Celsius)
• Humidity measurement range: 10…95 %RH
• Sound alarm when vape detected
• Auto off: after 5 minutes
• Power: 1000 mAh Li-Ion Battery, up to 8 hours of operation, (recharge USB 5V/1A)
• Dimensions: 5,1 x 1,8 x 8,6 cm
• Weight: 142 gr

• High level detection
• Oil on water surface detection
• Designed for usage in separators, basins and tanks
• Easy to install, does not need calibration
• Reliable long-term se in harshest conditions
• Acoustic and visual alarms
• 2 switch outputs
• ATEX certified
• Wall-mounted
• Supply: 230 VAC, 50/60 Hz

SM400-4-TH humidity and temperature sensor supports MODBUS RTU protocol over the RS-485 interface. Suitable for environmental quality monitoring offices, server room, data center and indoor air

• Changeable communication parameters
• Non-volatile memory for all settings
• Operating temperature range: -20…60°C
  • Accuracy (min): ± 0.4 °C (in -10…+ 60 °C range)
  • Accuracy (max): ± 0.6 °C (in -20…+ 60 °C range)
  • Resolution: 0.1 °C
• Operating relative humidity range: 10…90% (non-condensing)
  • Accuracy (min): ± 3.0 % RH (in 20…80 % RH range)
  • Accuracy (max): ± 5.0 % RH (in 10…90 % RH range)
  • Resolution: 0.1 % RH
• Ingress protection: IP20
• Operating voltage range: 4.5…26 VDC

The Kuhlmann Electro-Heat IBC Immersion Heater is an efficient solution for heating liquids in Intermediate Bulk Containers (IBCs), addressing viscosity challenges to enhance industrial productivity. Suitable for a variety of substances, it ensures consistent heating and easy liquid management. Its applications span multiple industries, including chemical processing, pharmaceuticals, food and beverage, and oil and gas. Constructed with durable stainless steel and featuring precise temperature control, this immersion heater combines performance with longevity.

Technical Specifications:

• Surface load: 2.2 W/cm²
• Power: 2000W
• Supply: 230V 1-phase
• Stainless steel tube element AISI 316L (1.4404)
• Length of element: 950mm
• Diameter of element: ø100mm
• Heated zone: 300mm
• Integrated PT100 sensor
• Minimum level of liquid during heating: 500mm (half full)
• Cable between heater and control unit: ~2800mm
• Digital controller: 0-90°C

An IBC silicone base heater efficiently heats up contents in an IBC container, making it easy to discharge viscous or semi-solid products with minimal waste. The 2700W heater can heat water from 15°C to 70°C in less than 40 hours. Kuhlmann’s durable silicone base heater fits various IBC containers and is easy to install and use. It can also be mounted with a digital temperature controller for precise temperature control.

Technical Specifications:

• Dimensions: 1035 - 851mm.
• Materials: 100% silicone.
• 1,5 meter power cord with no plugs.
• 0-150°C PT100 Sensor System temperature controller (additional product).
• Heats water from 15°C - 70°C in less than 40 hours in a fully loaded IBC Container.

idOil sensors are an integral part of the idOil oil separator alarm system and they are to be used with the idOil control units. All idOil sensors are digital and polarity free. Standard cable length is 5 m.

• idOil-LIQ high liquid level sensor
  Indicates when the liquid level in the oil separator rises excessively e.g. in an outlet blockage situation.
• idOil-OIL oil sensor
  Detects oil and indicates when the separator’s oil storage is full.
• idOil-SLU sludge sensor
  Monitors the sludge layer in the oil separator and indicates when the sludge layer has reached its maximum level.

“idOil®” is an alarm system intended for monitoring liquid levels particularly in oil and sand separators. The system consists of the idOil control unit and the idOil sensors installed in the separator. The sensor cables can be extended with a cable connector or connection box. One to three digital idOil sensors of the same or different type can be connected to the control unit. The sensors can be used to monitor the following:

• High liquid level (idOil-LIQ high liquid level sensor)
• Oil layer detection (idOil-OIL oil sensor is for class IIA explosive liquids and idOil-OIL-Soil sensor is for class IIB explosive liquids)
• Sludge layer detection (idOil-SLU sludge sensor)

“idOil®” is an alarm system intended for monitoring liquid levels particularly in oil and sand separators. The system consists of the idOil control unit and the idOil sensors installed in the separator. The sensor cables can be extended with a cable connector or connection box. One to three digital idOil sensors of the same or different type can be connected to the control unit. The sensors can be used to monitor the following:

• High liquid level (idOil-LIQ high liquid level sensor)
• Oil layer detection (idOil-OIL oil sensor is for class IIA explosive liquids and idOil-OIL-Soil sensor is for class IIB explosive liquids)
• Sludge layer detection (idOil-SLU sludge sensor)

• Silicone /  glass fiber coating
• Thermostat 0-200º C
• Glass fiber coating
• Protection class IP54
• Silicone insulation for heating element
• Warm-up time of 24h (for 200 L water barrel from +15º C to +80º C  with 1200 W barrel heater)
• Regulated fast-opening buckles
• Barrel heating pads can be used simultaneously
• Standard capacity 200 L
• 3 meter connection cable

• Applications of flue gas analyzer Si-Ca 230: boilers, burners, water heaters, gas and diesel engines, furnaces, industrial kilns, industrial heating systems, incinerators
• Detectable gases: O₂, CO (H₂ comp.), CO₂, NO, Low NO, NO₂, Low NO₂, NOx, Low NOx, SO₂, Low SO₂, CxHy (HC), H₂S
• Up to six gas sensors
• CO measurement up to 50 000 ppm
• Other measurement parameters: flue temp., air temp., differential temp., pressure / draft, excess air, combustion efficiency, combustion efficiency (condensation), stack gas velocity
• Color graphical touchscreen for control
• Communication: USB, Bluetooth (mobile App), remote printer
• Measurement storage: 2000 data points + smartphone and PC
• Predictive maintenance with estimated sensor life and calibration reminders
• Protection class: IP42
• Power supply: Rechargeable battery, Li-Ion 5100 mA/h 3.6 V (8 hours working time)
• Operating temperature: -5…+45 °C
• Sensor protection by pump stopping

Industrial IoT module TCW242 for remote real-time monitoring and control of industrial equipment, facilities, production lines, renewable energy systems, greenhouses and water stations

• Web-based configuration and control with password protection
• 4 digital inputs for dry contacts
• 4 analog inputs with 0-10V and 0-20mA options
• 4 relays with normally open/normally closed contacts
• RS-485 interface for MODBUS RTU sensors. Up to 24 sensors (registers)
• Monitor up to 24 channels
• Set up to 24 independent alarms
• SNMPv3 protocol support
• Alarm notifications via SNMP traps
• NTP protocol support
• HTTP API commands
• 4 schedules for real-time control of relay outputs
• Custom logical functions
• Secured email transfer with TLS 1.0, TLS 1.1, and TLS 1.2 support
• Data logging capacity for up to 70,000 records
• Dynamic DNS support for DynDNS, No-IP, and DNS-O-Matic providers
• Periodical HTTP / HTTPS Post of XML / JSON status files for client-server systems
• MODBUS TCP / IP protocol support
• MQTT 3.1.1 protocol support
• Rugged DIN-Rail / wall-mountable enclosure
• Operating temperature range: -20…+55 °C