Search

• Dual channel input: 0…24 mA or 0…10 V
• Communication interface: 1-Wire protocol
• Accuracy: ±1 %
• Resolution: 0.001mA / 0.001 V
• Galvanic isolation between the current circuit and 1-Wire bus
• Detection of special states such as sensor errors or calibration values
• Operating environment: -20…+60 °C / 10…90 %RH
• Warranty: 3 years

• Measurement of parameters: voltage, current, active, reactive and apparent power, cosφ, tgφ, frequency, active, reactive and apparent energy, active power 15 minutes, voltage 10 minutes
• Current and voltage harmonics analysis up to 51st (measurements available via RS-485)
• Programmable input:
  • Current: 0…1 / 0…5A
  • Voltage: 0…100V / 0…230V / 0…400V
• Output:
  • Analog: 0/4...20 mA or 0...10 V
  • Relays: 1 or 4
  • Binary (OC)
• Digital output: RS-485 modbus (can be programmed through RS-485)
• Two-line LCD display
• Pulse output to measure energy consumption
• 4 alarm outputs with signaling on LED diodes, working in 7 different modes
• Conversion of any measured value into an analog signal 0/4...20 mA or 0...10V
• Protection grade: frontal side – IP65 / from terminal side – IP10
• Operating temperature: -25...23...55 °C

The enLink Status-VC transmits data using long range LoRa wireless which easily integrates with cloud services or on-site Systems.

• 0…20 mA, 0…10 V or resistance input
• 12 bit resolution
• Communication: LoRaWAN; frequency range: 863-870 MHz; up to 16 km range
• Measurement sending interval: 30 s to 3 hours
• 2 x Li-SOCl2 (3.6V) AA sized batteries ensure 3+ years of operation
• Configuration via USB cable / downlink
• Case IP40 protection (IP 67 on request)

• Volumetric flow and air velocity meter with linear analogue output in control quality (0...10 V & 4...20 mA) and switch
• Suitable for media temperatures up to 350°C
• Measured value display by means of LCD and LED
• Freely scalable measuring range m/s, m³/h, l/min
• Sensitive and fast airflow detection up to 30 m/s
• Exemplary areas of application: Measurement and control of air flows, building services, PLC, filter monitoring, extraction and extrusion systems, exhaust gases and test benches

Sensor SKU: 5905309601192 (IP30)

Sensor SKU: 5905309601482 (IP67)

Wireless 4…20 mA / 0…10 V analog signal data logger, sensor interface, BLE allows users to connect analog sensors to the cloud**. Device can be equipped with up to four analog interfaces / transducers (2 x 4…20 mA and 2 x 0…10 V). Transducer can be powered* either from the device’s battery or by an external power source.

You can use a free mobile application to configure the device and read the data from its memory. If you add Efento Gateway, you can build a remote monitoring system.

• Communication: BLE (Bluetooth Low Energy)
• Measurement and transmission period: 5 seconds to 30 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery (on request 1000 mAh rechargeable battery (USB 5V))
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• External transducers can be powered by the device's battery (max. 16V, 30 mA)
• The device can be used as a stand-alone data logger or connected to the Efento gateway to view and store data in the Efento cloud
• Possibility to integrate sensor to other third-party systems
• Operating temperature / humidity: -15…+70 °C / 0…99 %
• Case IP30 protection (IP 67 on request)

Sensor SKU: 5905309600072 (IP30)

Sensor SKU: 5905309600607 (IP67)

Efento NB-IoT sensors transmit the data over cellular network (Narrowband IoT) and do not require any additional devices (router, gateway, etc.). Sensors are also equipped with Bluetooth Low Energy interface, which allows quick and easy configuration with a smartphone. Efento NB-IoT sensors can be integrated with Efento Cloud** platform or any other third party systems.

• Wireless 4…20 mA / 0…10 V analog signal sensor interface, data logger, NB-IoT measures analog readings and can send data over NB-IoT
• Device can be equipped with up to four analog interfaces / transducers (2 x 4…20 mA and 2 x 0…10 V)
• Transducer can be powered* either from the device’s battery or by an external power source
• Communication NB-IoT bands: default B8 and B20 (others on request)
• Measurement period: 1 minutes to 18 hours (configurable by the user)
• Measurement sending interval: 5 minutes to 7 days (configurable by the user)
• Battery ensures up to 5 years of maintenance-free operation, 6300 mAh battery
• The device stores 40,000 measurements in its memory, when the memory is full, the oldest measurements are overwritten
• Possibility to integrate sensor to other third-party systems
• Operating environmental: -35…+70 °C / 0…99 % RH non-condensing
• Case IP30 protection (IP67 on request)

Measures analog signal of a 3rd party sensor. Provides 24 or 12 VDC power for a 3rd party sensor using the built-in power supply unit (PSU).

• Sensor compatible with base stations: PRO, PRO Plus ir PRO Plus LTE
• Current measurement range: 0...30 mA
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Operating temperature: -30...+80 °C
• Power supply: 85…265 VAC
  • 1 x AA battery is for to notify user in case of external
• Protection class: IP67

LoRa-Log-Meter is a wireless data logging system based on LoRaWAN communication technology. It is designed to collect data from LoRaWAN devices such as sensors, interfaces, and meters that monitor environmental, technological and industrial process parameters and transmit data packets to a LoRaWAN gateway.

Collected data is processed and stored in the gateway, and can be accessed via a web browser.

• Compatible with Synetica and others LoRaWAN devices: analog inputs (4–20 mA, 0–20 mA, 0–10 V), temperature sensors, pulse inputs (SO, NC/NO contacts) and others
• Individual alarm notifications based on specific sensors or contacts
• Alarm notifications via email and SMS
• Logging and review of errors and communication issues
• Remote access to the LoRa-Log-Meter system via 4G LTE, Wi-Fi, or LAN (Ethernet)
• Dynamic data visualization in graph (curve) format via a web browser
• Data export in CSV and PNG formats
• Password-protected user interface
• No subscription required for the gateway or sensors
• Remote configuration of data transmission intervals for devices via a web browser
• Communication range from sensor to gateway:
  • 15 km Outdoors (in plain sight)
  • 50–200 meters indoors or up to 7–8 walls*
• LoRaWAN devices powered by: 2 × AA 3.6 V lithium batteries or 5 V USB power

Measures analog signal of a 3rd party sensor. Provides 24 or 12 VDC power for a 3rd party sensor using the built-in power supply unit (PSU).

• Sensor compatible with base stations: PRO, PRO Plus ir PRO Plus LTE
• Voltage measurement range: -32...32 VDC
• Operational range (in line-of-sight): up to 3 km
• Data transmission: 1, 2, 5, 10 min
• Operating temperature: -30...+80 °C
• Power supply: 85…265 VAC
  • 1 x AA battery is for to notify user in case of external
• Protection class: IP67